root cause that S2A need to use deduct offset flag.
after setting this flag, vcn0 doorbell value works.
so return it as before
Signed-off-by: Jane Jian <Jane.Jian@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
-Add configuration 2 for ABM 2.3/2.4.
-Add margin for HUBP for SubVp + DRR.
-Fix no display after resume from WB/CB.
-Limit HW cursor size to be less than 64 x 64 bytes when the stream is >= 4K.
-Lower watermarks for enter/enter+exit latency.
-Update support types for DCN314 to include z8 only and z8_z10 only state.
-Add new value for soc bounding box and dummy pstate.
-Override fclk chang latency when calculating prefetch schedule for subvp with low uclk.
-Add check for DET fetch latency for dcn32.
-Add check if PSR enabled when entering MALL.
-Use base MALL allocation size calculations off vewport height.
-Add YCBCR2020 to CSC matrix.
-Implement DP-Tx portion to interact with DPIA.
-Add debug option for increasing phantom lines.
-Fix phantom plane/stream retain after fail validation.
-Fix display corruption with VSR enable.
-Set valid divider value for virtual and FRL/DP2.
-Add new num clk levels struct for max mclk index.
-Fix check for phantom BPP.
-Fix rotated cursor offset calculation.
Signed-off-by: Aric Cyr <Aric.Cyr@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Underflow is observed when cursor is still enabled when the cursor
rectangle is outside the bounds of it's surface viewport.
[How]
Update parameters used to determine when cursor should be disabled.
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: David Galiffi <David.Galiffi@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY?]
When calculating watermark and dlg values, the max mclk level index and
associated speed are needed to find the correlated dummy latency value.
Currently the incorrect index is given due to a clock manager refactor.
[HOW?]
Use num_memclk_level from num_entries_per_clk struct for getting the correct max
mem speed.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Brief corruption is observed on hotplug/unplug with certain display
configurations when VSR is enabled.
[How]
Work around the issue by avoiding 2to1 ODM when stream plane_count is 0.
Reviewed-by: Dillon Varone <Dillon.Varone@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- If we fail validation, we should retain the phantom
stream/planes
- Full updates assume that phantom pipes will be fully
removed, but if validation fails we keep the phantom
pipes
- Therefore we have to retain the plane/stream if validation
fails (since the refcount is decremented before validation,
and the expectation is that it's fully freed when the old
dc_state is released)
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When some of the IGT tests are executed in DCN31, it is possible to see
multiple occurrences of this warning:
WARNING: CPU: 9 PID: 3482 at
drivers/gpu/drm/amd/amdgpu/../dal-dev/dc/dcn30/dcn30_dpp.c:154
dpp3_program_post_csc+0x196/0x220 [amdgpu]
[..]
PU: 9 PID: 3482 Comm: amd_hdr Tainted: G W 5.18.0+ #3
IP: 0010:dpp3_program_post_csc+0x196/0x220 [amdgpu]
[..]
all Trace:
<TASK>
dpp3_cnv_setup+0x5d9/0x5f0 [amdgpu]
? dcn20_blank_pixel_data+0x30a/0x330 [amdgpu]
dcn20_program_pipe+0x259/0xb40 [amdgpu]
? offset_to_id+0x1b0/0x1c0 [amdgpu]
dcn20_program_front_end_for_ctx+0x36a/0x450 [amdgpu]
commit_planes_for_stream+0x8eb/0x13e0 [amdgpu]
This commit fix the above issue by adding YCBCR2020 coefficients to the
DPP Color Space Converter (CSC) matrix.
Reviewed-by: Nawwar Ali <nawwar.ali@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- When attempting to enter MALL SS when a PSR panel
is connected, we have to check that the PSR panel
has already entered PSR because the vsync interrupt
call is per display index (can be called for the
non-PSR panel first)
- Also don't override link settings when programming
phantom stream (main and phantom pipe share the same link)
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY?]
Some configurations are constructed with very marginal DET buffers relative to
the worst possible time required to fetch a swath.
[HOW?]
Add a check to see that the DET buffer allocated for each pipe can hide the
latency for all pipes to fetch at least one swath.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY?]
Prefetch is not budgetting time for dummy pstate when using subvp and low uclk.
[HOW?]
Override fclk change latency to use dummy pstate latency when calculating
prefetch schedule for subvp configs with low uclk.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Even if we block Z9 based on crossover threshold it's possible to
allow for Z8.
[How]
There's support for this on DCN314, so update the support types to
include a z8 only and z8_z10 only state.
Update the decide_zstate_support function to allow for specifying
these modes based on the Z8 threshold.
DCN31 has z-state disabled, but still update the legacy code to
map z8_only = disallow and z10_z8_only = z10_only to keep the support
the same.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- For SubVP, we cannot support HW cursor if it's
greater than 64 x 64 x 4 bytes in size
- However, on certain config changes (i.e. pixel format)
we can exit SubVP (then change to HW cursor) then re-enter
SubVP without changing back to SW cursor because there is
no SetCursorAttributes call
- To workaround this issue, limit the HW cursor size to be
less than 64 x 64 x 4 bytes whenever the stream is >= 4K
- Also ensure this W/A only affects DCN that supports SubVP
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
First MST sideband message returns AUX_RET_ERROR_HPD_DISCON
on certain intel platform. Aux transaction considered failure
if HPD unexpected pulled low. The actual aux transaction success
in such case, hence do not return error.
[how]
Not returning error when AUX_RET_ERROR_HPD_DISCON detected
on the first sideband message.
v2: squash in fix (Alex)
Reviewed-by: Jerry Zuo <Jerry.Zuo@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Tsung-hua Lin <Tsung-hua.Lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- Add margin for HUBP "jitter" for SubVp + DRR case
- Also do a min transition even if MPO is added on a
non SubVP pipe (i.e. added on DRR pipe for SubVP + DRR)
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Add configuration 2 for ABM 2.3/2.4 to suit customer preferences, which
is to lower the brightness curves in 80%-100% range compared to the
existing default config 0.
Reviewed-by: Josip Pavic <Josip.Pavic@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Camille Cho <Camille.Cho@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There's been a very long running bug that seems to have been neglected for
a while, where amdgpu consistently triggers a KASAN error at start:
BUG: KASAN: global-out-of-bounds in read_indirect_azalia_reg+0x1d4/0x2a0 [amdgpu]
Read of size 4 at addr ffffffffc2274b28 by task modprobe/1889
After digging through amd's rather creative method for accessing registers,
I eventually discovered the problem likely has to do with the fact that on
my dce120 GPU there are supposedly 7 sets of audio registers. But we only
define a register mapping for 6 sets.
So, fix this and fix the KASAN warning finally.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As comment of pci_get_domain_bus_and_slot() says, it returns
a pci device with refcount increment, when finish using it,
the caller must decrement the reference count by calling
pci_dev_put().
So before returning from amdgpu_device_resume|suspend_display_audio(),
pci_dev_put() is called to avoid refcount leak.
Fixes: 3f12acc8d6 ("drm/amdgpu: put the audio codec into suspend state before gpu reset V3")
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is used to fix following compilation issue with legacy gcc
error: ‘for’ loop initial declarations are only allowed in C99 mode
for (int i = flag_vlevel; i < context->bw_ctx.dml.soc.num_states; i++) {
Signed-off-by: Bob zhou <bobzhou2@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GVT Changes:
- gvt-next stuff mostly with refactor for the new MDEV interface.
i915 Changes:
- PSR fixes and improvements (Jouni)
- DP DSC fixes (Vinod, Jouni)
- More general display cleanups (Jani)
- More display collor management cleanup targetting degamma (Ville)
- remove circ_buf.h includes (Jiri)
- wait power off delay at driver remove to optimize probe (Jani)
- More audio cleanup targeting the ELD precompute readout (Ville)
- Enable DC power states on all eDP ports (Imre)
- RPL-P stepping info (Matt Atwood)
- MTL enabling patches (RK)
- Removal of DG2 force_probe (Matt)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y3f71obyEkImXoUF@intel.com
amd-drm-next-6.2-2022-11-18:
amdgpu:
- SR-IOV fixes
- Clean up DC checks
- DCN 3.2.x fixes
- DCN 3.1.x fixes
- Don't enable degamma on asics which don't support it
- IP discovery fixes
- BACO fixes
- Fix vbios allocation handling when vkms is enabled
- Drop buggy tdr advanced mode GPU reset handling
- Fix the build when DCN is not set in kconfig
- MST DSC fixes
- Userptr fixes
- FRU and RAS EEPROM fixes
- VCN 4.x RAS support
- Aldrebaran CU occupancy reporting fix
- PSP ring cleanup
amdkfd:
- Memory limit fix
- Enable cooperative launch on gfx 10.3
amd-drm-next-6.2-2022-11-11:
amdgpu:
- SMU 13.x updates
- GPUVM TLB race fix
- DCN 3.1.4 updates
- DCN 3.2.x updates
- PSR fixes
- Kerneldoc fix
- Vega10 fan fix
- GPUVM locking fixes in error pathes
- BACO fix for Beige Goby
- EEPROM I2C address cleanup
- GFXOFF fix
- Fix DC memory leak in error pathes
- Flexible array updates
- Mtype fix for GPUVM PTEs
- Move Kconfig into amdgpu directory
- SR-IOV updates
- Fix possible memory leak in CS IOCTL error path
amdkfd:
- Fix possible memory overrun
- CRIU fixes
radeon:
- ACPI ref count fix
- HDA audio notifier support
- Move Kconfig into radeon directory
UAPI:
- Add new GEM_CREATE flags to help to transition more KFD functionality to the DRM UAPI.
These are used internally in the driver to align location based memory coherency
requirements from memory allocated in the KFD with how we manage GPUVM PTEs. They
are currently blocked in the GEM_CREATE IOCTL as we don't have a user right now.
They are just used internally in the kernel driver for now for existing KFD memory
allocations. So a change to the UAPI header, but no functional change in the UAPI.
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221118170807.6505-1-alexander.deucher@amd.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
drm-misc-next for 6.2:
UAPI Changes:
Cross-subsystem Changes:
- fbdev: Add support for the nomodeset kernel parameter
Core Changes:
- client: Add kunit tests for drm_connector_pick_cmdline_mode()
- dma-buf: Move dma_buf_mmap_internal() to new locking specification
- edid: Dump EDID on drm_edid_get_panel_id() failure, Stop using a
temporary device to load the EDID through the firmware mechanism
- fb-helper: Remove damage worker
- gem-vram: Fix deadlock in drm_gem_vram_vmap()
- modes: Named mode parsing improvements
- tests: Add Kunit helpers to create a DRM device
Driver Changes:
- hisilicon: convert to drm_mode_init()
- malidp: Use drm-managed resources
- msm: convert to drm_mode_init() and drm_mode_copy()
- mtk: convert to drm_mode_init()
- nouveau: Support backlight control for nva3
- rockchip: convert to drm_mode_copy()
- sti: convert to drm_mode_copy()
- v3d: Switch to drm-managed resources
- vc4: Fix potential NULL pointer dereference
- panels:
- New panel: NewVision NV3051D
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20221117083628.mzij5nrbdzokek7c@houat
Factor out functions to get/put the AUX_IO power domain for the main
link on DDI ports.
While at it clarify the corresponding code comment.
No functional change.
v2:
- s/(get/put)_aux_power_for_main_link/main_link_aux_power_domain_(get/put)
(Jani)
- Clarify in the code comment that AUX_IO is needed only by TypeC besides
eDP/PSR.
v3:
- Rebased on checking intel_encoder_can_psr() instead of crtc->has_psr.
v4:
- Don't call fetch_and_zero() with side-effect during variable
declaration. (Ville)
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221114122251.21327-9-imre.deak@intel.com
Starting with TGL eDP is supported on ports B+ (besides port A), so make
sure DC states are not blocked on any such ports. For this add an
AUX_IO_<port> power domain for each port with eDP support. These domains
similarly to AUX_IO_A enable only the AUX_IO_<port> power well for an
enabled port, whereas the existing AUX_<port> domains enable both the
AUX_IO_<port> and the DC_OFF power wells as required by DP AUX transfers.
v2: (Ville)
- Split the change using AUX vs. AUX_IO on port A to a separate patch.
- Select AUX_IO vs. AUX based on crtc_state->has_psr instead of
is_edp().
v3:
- Rebased on checking intel_encoder_can_psr() instead of crtc->has_psr.
v4:
- Fix warn in intel_display_power_aux_io_domain(). (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221114122251.21327-6-imre.deak@intel.com
Use the AUX_IO_A display power domain only for eDP on port A where PSR
is also supported. This is the case where DC states need to be enabled
while the output is enabled - ensured by AUX_IO_A domain not enabling
the DC_OFF power well. Otherwise port A can be treated the same way as
other ports with an external DP output: using the AUX_<port> domain
which disables the unrequired DC states.
This change prepares for the next patch enabling DC states on all ports
supporting eDP/PSR besides port A.
v2:
- Check the encoder PSR capability instead of PSR being enabled in the
crtc_state, as the latter can be changed with a fastset.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221114122251.21327-5-imre.deak@intel.com
