Update the driver for our current coding style according to output from
`checkpatch.pl' and manual code review, where no change to binary code
results, as indicated by `objdump -dr'. Exceptions are as follows:
- incomplete reverse xmas tree in set_multicast_list(), as that would
change binary output,
- referring el3_start_xmit() verbatim rather than via `__func__' with
pr_debug(), likewise,
- a bunch of pr_cont() calls, likewise,
- a long udelay() call in el3_netdev_set_ecmd() made under a spinlock,
likewise plus it's not eligible for conversion to a sleep in the first
place,
- a blank line at the start of a block in el3_interrupt(), to improve
readability where the first statement would otherwise visually merge
with the controlling expression of the enclosing `while' statement.
These issues are benign and depending on circumstances may be adressed
with suitable code refactoring later on.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://patch.msgid.link/alpine.DEB.2.21.2605201208280.1450@angie.orcam.me.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There has been apparently a single message only ever publicly posted by
David Ruggiero, back in 2002, which added this documentation piece among
others, and MAINTAINERS was never updated accordingly. It is therefore
doubtful that his maintainer status has actually come into effect. Just
replace the reference then so as not to confuse people.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://patch.msgid.link/alpine.DEB.2.21.2605201207380.1450@angie.orcam.me.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The transceiver type is held in bits 15:14 of the Address Configuration
Register, with the values of 0b00, 0b01, and 0b11 denoting TP, AUI, and
BNC types respectively. Therefore switching from BNC to AUI requires
bits to be cleared before setting bit 14 or the setting won't change.
NB this has always been wrong ever since this code was added in 2.5.42.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://patch.msgid.link/alpine.DEB.2.21.2605201205160.1450@angie.orcam.me.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
skb_gro_receive() can currently copy frags between the source and GRO
skb, without checking the zerocopy status, and in particular the
SKBFL_MANAGED_FRAG_REFS flag.
When SKBFL_MANAGED_FRAG_REFS is set, the skb doesn't hold a reference
on the pages in shinfo->frags. Appending those frags to another skb's
frags without fixing up the page refcount can lead to UAF.
When either the last skb in the GRO chain (the one we would append
frags to) or the source skb is zerocopy, don't merge the skbs.
Fixes: 753f1ca4e1 ("net: introduce managed frags infrastructure")
Reported-by: Huzaifa Sidhpurwala <huzaifas@redhat.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/c3b7f906bbfcbdfd7b4fa9d6c18a438870df85be.1779307748.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver passes fw_version directly to devlink_info_version_stored_put()
without ensuring null-termination. While current firmware null-terminates
these strings, the driver should not rely on this behavior. Add explicit
null-termination to prevent potential issues if firmware behavior changes.
Fixes: 45d76f4929 ("pds_core: set up device and adminq")
Signed-off-by: Nikhil P. Rao <nikhil.rao@amd.com>
Link: https://patch.msgid.link/20260520205842.1486718-1-nikhil.rao@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reported by Sashiko:
In ipv6_hop_ioam(), the hdr pointer is initialized to point into the
skb's linear data buffer. Later, the code calls skb_ensure_writable(),
which might reallocate the buffer:
if (skb_ensure_writable(skb, optoff + 2 + hdr->opt_len))
goto drop;
/* Trace pointer may have changed */
trace = (struct ioam6_trace_hdr *)(skb_network_header(skb)
+ optoff + sizeof(*hdr));
ioam6_fill_trace_data(skb, ns, trace, true);
ioam6_event(IOAM6_EVENT_TRACE, dev_net(skb->dev),
GFP_ATOMIC, (void *)trace, hdr->opt_len - 2);
If the skb is cloned or lacks sufficient linear headroom,
skb_ensure_writable() will invoke pskb_expand_head(), which reallocates
the skb's data buffer and frees the old one, invalidating pointers to
it. While the code recalculates the trace pointer immediately after the
call to skb_ensure_writable(), it fails to recalculate the hdr pointer.
This patch fixes the above by recalculating the hdr pointer before
passing hdr->opt_len to ioam6_event(), so that we avoid any UaF.
Fixes: f655c78d62 ("net: exthdrs: ioam6: send trace event")
Cc: stable@vger.kernel.org
Signed-off-by: Justin Iurman <justin.iurman@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260520124242.32320-1-justin.iurman@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the SIOCGIFHWADDR path, tap_ioctl() copies 16 bytes of an
uninitialised on-stack struct sockaddr_storage to userspace via
ifr_hwaddr, but netif_get_mac_address() only writes sa_family and
dev->addr_len (6 for Ethernet) bytes, leaving sa_data[6..13] uninitialised.
Those 8 trailing bytes leak kernel stack contents; SIOCGIFHWADDR on a
macvtap chardev returns kernel .text and direct-map pointers, defeating
KASLR.
Initialise ss at declaration.
Fixes: 3b23a32a63 ("net: fix dev_ifsioc_locked() race condition")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260520075736.3415676-3-bestswngs@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If one of the later PF or VF CID bitmap allocations fails,
qed_cid_map_alloc() jumps to cid_map_fail and frees the previously
allocated CID bitmaps before returning an error. qed_cxt_tables_alloc()
then calls qed_cxt_mngr_free(), which invokes qed_cid_map_free()
again.
Fix this by setting each CID bitmap pointer to NULL after bitmap_free()
to avoid double free.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1-rc3.
Runtime reproduction was not attempted because exercising the failing
allocation path requires device-specific setup.
Fixes: fe56b9e6a8 ("qed: Add module with basic common support")
Cc: stable@vger.kernel.org
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Signed-off-by: Dawei Feng <dawei.feng@seu.edu.cn>
Link: https://patch.msgid.link/20260520070323.2762379-1-dawei.feng@seu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In mana_hwc_rx_event_handler(), rx_req_idx is derived from
sge->address in DMA-coherent memory. In Confidential VMs
(SEV-SNP/TDX), this memory is shared unencrypted and HW can modify
WQE contents at any time. No bounds check exists on rx_req_idx,
which can lead to an out-of-bounds access into reqs[].
Add bounds check on rx_req_idx in mana_hwc_rx_event_handler() before
using it to index the reqs[] array.
Fixes: ca9c54d2d6 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)")
Signed-off-by: Aditya Garg <gargaditya@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/20260520051553.857120-1-gargaditya@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When installing the allmulticast NPC rule, rvu_npc_install_allmulti_entry()
should skip LBK and SDP VFs (only CGX PF/VF may add the entry). The
code combined is_lbk_vf() and is_sdp_vf() with logical AND, which is
never true for a single pcifunc, so the intended early return never ran.
Use logical OR instead.
Cc: Geetha sowjanya <gakula@marvell.com>
Fixes: ae703539f4 ("octeontx2-af: Cleanup loopback device checks")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260520043036.1523798-1-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
__netpoll_send_skb() always transmits through np->dev and queues busy
packets on np->dev->npinfo->txq, but it leaves skb->dev unchanged.
Stacked callers such as DSA and macvlan can reach netpoll with skb->dev
still naming the upper device while np->dev is the lower device that
owns the netpoll state.
If the skb has to be deferred, queue_process() later dequeues it from
the lower device's txq but retries it through skb->dev. That can
re-enter the upper ndo_start_xmit path on an already transformed skb,
and if the upper device disappears before the lower txq drains the
workqueue can dereference a stale skb->dev pointer.
The buggy scenario involves two paths, with each column showing the
order within that path:
path A label: netpoll enqueue path path B label: upper-device teardown
1. Stacked xmit calls netpoll 1. Teardown unregisters the upper
with lower np->dev and upper net_device while lower npinfo
skb->dev. stays alive.
2. __netpoll_send_skb() uses 2. netdev_release() runs for the
np->dev->npinfo as the txq upper net_device.
owner.
3. Busy transmit queues the skb 3. The lower txq still owns the
on that lower txq with upper deferred skb.
skb->dev.
4. queue_process() drains the 4. queue_process() dereferences
lower txq and reads skb->dev. that stale upper skb->dev.
Normalize skb->dev to np->dev after loading np->dev from the netpoll
instance, before either the direct transmit path or the fallback enqueue.
This keeps the queued skb in the same device and txq domain as the
netpoll state that owns it.
KASAN report as below:
KASAN slab-use-after-free in queue_process+0x7c/0x480
Workqueue: events queue_process
The buggy address belongs to the object at ffff88810906c000 which belongs
to the cache kmalloc-4k of size 4096
The buggy address is located 168 bytes inside of freed 4096-byte region
[ffff88810906c000, ffff88810906d000)
Read of size 8
Call trace:
dump_stack_lvl+0x73/0xb0 (?:?)
print_report+0xd1/0x620 (?:?)
srso_alias_return_thunk+0x5/0xfbef5 (?:?)
__virt_addr_valid+0x215/0x420 (?:?)
kasan_complete_mode_report_info+0x64/0x200 (?:?)
kasan_report+0xf7/0x130 (?:?)
queue_process+0x7c/0x480 (net/core/netpoll.c:88)
kasan_check_range+0x10c/0x1c0 (?:?)
__kasan_check_read+0x15/0x20 (?:?)
process_one_work+0x8b7/0x1af0 (kernel/workqueue.c:3200)
assign_work+0x170/0x3f0 (?:?)
worker_thread+0x574/0xf10 (?:?)
_raw_spin_unlock_irqrestore+0x4b/0x60 (?:?)
trace_hardirqs_on+0x2a/0x180 (?:?)
kthread+0x2fc/0x3f0 (?:?)
ret_from_fork+0x58b/0x830 (?:?)
__switch_to+0x58e/0xe90 (?:?)
__switch_to_asm+0x39/0x70 (?:?)
ret_from_fork_asm+0x1a/0x30 (?:?)
Freed by task stack:
kasan_save_stack+0x3d/0x60 (?:?)
kasan_save_track+0x18/0x40 (?:?)
kasan_save_free_info+0x3f/0x60 (?:?)
__kasan_slab_free+0x48/0x70 (?:?)
kfree+0x20e/0x4e0 (?:?)
kvfree+0x31/0x40 (?:?)
netdev_release+0x71/0x90 (net/core/net-sysfs.c:2227)
device_release+0xd2/0x250 (?:?)
kobject_put+0x181/0x4c0 (lib/kobject.c:730)
netdev_run_todo+0x700/0x1000 (net/core/dev.c:11666)
rtnl_dellink+0x396/0xc00 (net/core/rtnetlink.c:3558)
rtnetlink_rcv_msg+0x740/0xc20 (net/core/rtnetlink.c:6897)
netlink_rcv_skb+0x147/0x3a0 (?:?)
rtnetlink_rcv+0x19/0x20 (net/core/rtnetlink.c:7021)
netlink_unicast+0x4d1/0x830 (net/netlink/af_netlink.c:1327)
netlink_sendmsg+0x840/0xe10 (net/netlink/af_netlink.c:1812)
____sys_sendmsg+0x8a7/0xb50 (?:?)
___sys_sendmsg+0x104/0x190 (?:?)
__sys_sendmsg+0x135/0x1d0 (?:?)
__x64_sys_sendmsg+0x7b/0xc0 (?:?)
x64_sys_call+0x205c/0x2130 (?:?)
do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?)
Fixes: 5de4a473bd ("netpoll queue cleanup")
Signed-off-by: Zhang Cen <rollkingzzc@gmail.com>
Link: https://patch.msgid.link/20260519104647.3517990-1-rollkingzzc@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Data adjustment cases failed with "Data exchange failed" when using IPv4
because the program did not update the IP and UDP checksums in the IPv4
branch. The issue was masked when both IPv4 and IPv6 were configured,
since the test harness prefers IPv6.
While here, generalize csum_fold_helper() to fold twice so it works for
any 32-bit input.
Fixes: 0b65cfcef9 ("selftests: drv-net: Test tail-adjustment support")
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Nimrod Oren <noren@nvidia.com>
Link: https://patch.msgid.link/20260520153928.3371765-1-noren@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ip6_route_init() registers ip6_route_dev_notifier before registering the
IPv6 route BPF iterator target. If bpf_iter_register() fails after the
notifier has been registered, the error path currently jumps to
out_register_late_subsys and unwinds the RTNL handlers and pernet route
state without removing the notifier from the netdevice notifier chain.
This leaves ip6_route_dev_notify() callable after the IPv6 route state it
uses has been torn down. Add a separate unwind label for the BPF iterator
failure path and unregister the netdevice notifier before continuing with
the existing cleanup.
Fixes: 138d0be35b ("net: bpf: Add netlink and ipv6_route bpf_iter targets")
Signed-off-by: Yuho Choi <dbgh9129@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260520030329.1061183-1-dbgh9129@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The run.sh script explicitly checks that CONFIG_MODULES is disabled.
By default, this config option is enabled. Explicitly disable it to be
able to run the RDS tests.
Note that writing '# CONFIG_(...) is not set' is usually recommended to
disable an option in the .config, but it looks like selftests usually
set 'CONFIG_(...)=n', which looks clearer.
Fixes: 0f5d680047 ("selftests: rds: add tools/testing/selftests/net/rds/config")
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260520-net-rds-config-modules-v1-1-2100df02fe9a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The networking receive path is usually run from softirq context, but
protocols that take the socket lock may have packets stored in the
backlog and processed later from process context. In that case
release_sock() -> __release_sock() drops the slock with spin_unlock_bh()
and then calls sk->sk_backlog_rcv() with bottom halves enabled.
Typical sk_backlog_rcv handlers process the socket whose backlog is
being drained, so the BH state at entry is irrelevant for the slocks
they touch. pep_do_rcv() is different: when the inbound skb targets an
existing PEP pipe, it forwards the skb to a different *child* socket
via sk_receive_skb(). That helper takes the child slock with
bh_lock_sock_nested(), which is just spin_lock_nested() and assumes BH
is already off. The same child slock therefore ends up acquired with
BH on (process path) and with BH off (softirq path):
process context softirq context
--------------- ---------------
release_sock(listener) __netif_receive_skb()
__release_sock() phonet_rcv()
spin_unlock_bh() __sk_receive_skb(listener)
[BH now ENABLED] [BH already disabled]
sk_backlog_rcv: sk_backlog_rcv:
pep_do_rcv() pep_do_rcv()
sk_receive_skb(child) sk_receive_skb(child)
bh_lock_sock_nested(child) bh_lock_sock_nested(child)
=> SOFTIRQ-ON-W => IN-SOFTIRQ-W
Lockdep flags this as inconsistent lock state, and it can become a real
self-deadlock if a softirq on the same CPU tries to receive to the same
child socket while its slock is held in the BH-enabled path:
WARNING: inconsistent lock state
inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
(slock-AF_PHONET/1){+.?.}-{3:3}, at: __sk_receive_skb+0x1cf/0x900
__sk_receive_skb net/core/sock.c:563
sk_receive_skb include/net/sock.h:2022 [inline]
pep_do_rcv net/phonet/pep.c:675
sk_backlog_rcv include/net/sock.h:1190
__release_sock net/core/sock.c:3216
release_sock net/core/sock.c:3815
pep_sock_accept net/phonet/pep.c:879
Wrap the forwarded sk_receive_skb() in local_bh_disable() /
local_bh_enable() so the child slock is always acquired with BH off.
local_bh_disable() nests safely on the softirq path.
Discovered via in-house syzkaller fuzzing; the same root cause also
on the linux-6.1.y syzbot dashboard as extid 44f0626dd6284f02663c.
Reproduced under KASAN + LOCKDEP + PROVE_LOCKING, reproducer:
https://pastebin.com/A3t8xzCR
Fixes: 9641458d3e ("Phonet: Pipe End Point for Phonet Pipes protocol")
Link: https://syzkaller.appspot.com/bug?extid=44f0626dd6284f02663c
Cc: stable@vger.kernel.org
Signed-off-by: Zijing Yin <yzjaurora@gmail.com>
Acked-by: Rémi Denis-Courmont <remi@remlab.net>
Reported-by: syzbot+9f4a135646b66c509935@syzkaller.appspotmail.com
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260519172635.86304-1-yzjaurora@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After commit 059b7dbd20 ("vsock/virtio: fix potential unbounded skb
queue"), virtio_transport_inc_rx_pkt() subtracts per-skb overhead from
buf_alloc when checking whether a new packet fits. This reduces the
effective receive buffer below what the user configured via
SO_VM_SOCKETS_BUFFER_SIZE, causing legitimate data packets to be
silently dropped and applications that rely on the full buffer size
to deadlock.
Also, the reduced space is not communicated to the remote peer, so
its credit calculation accounts more credit than the receiver will
actually accept, causing data loss (there is no retransmission).
With this approach we currently have failures in
tools/testing/vsock/vsock_test.c. Test 18 sometimes fails, while
test 22 always fails in this way:
18 - SOCK_STREAM MSG_ZEROCOPY...hash mismatch
22 - SOCK_STREAM virtio credit update + SO_RCVLOWAT...send failed:
Resource temporarily unavailable
Fix by allowing at most `buf_alloc * 2` as the total budget for payload
plus skb overhead in virtio_transport_inc_rx_pkt(), similar to how
SO_RCVBUF is doubled to reserve space for sk_buff metadata.
This preserves the full buf_alloc for payload under normal operation,
while still bounding the skb queue growth.
With this patch, all tests in tools/testing/vsock/vsock_test.c are
now passing again.
Fixes: 059b7dbd20 ("vsock/virtio: fix potential unbounded skb queue")
Cc: stable@vger.kernel.org
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20260518090656.134588-3-sgarzare@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When there is no more space to queue an incoming packet, the packet is
silently dropped. This causes data loss without any notification to
either peer, since there is no retransmission.
Under normal circumstances, this should never happen. However, it could
happen if the other peer doesn't respect the credit, or if the skb
overhead, which we recently began to take into account with commit
059b7dbd20 ("vsock/virtio: fix potential unbounded skb queue"),
is too high.
Fix this by resetting the connection and setting the local socket error
to ENOBUFS when virtio_transport_recv_enqueue() can no longer queue a
packet, so both peers are explicitly notified of the failure rather than
silently losing data.
Fixes: ae6fcfbf5f ("vsock/virtio: discard packets if credit is not respected")
Cc: stable@vger.kernel.org
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20260518090656.134588-2-sgarzare@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Validate rx-internal-delay-ps and tx-internal-delay-ps against the
hardware capabilities of the EIC7700 MAC.
The programmable RGMII delay supports 20 ps steps and a maximum value of
2540 ps. The driver previously accepted arbitrary values and silently
truncated unsupported settings when converting them to hardware units.
As a result, invalid device tree values could lead to unexpected delay
programming and incorrect RGMII timing.
Reject delay values that are not multiples of 20 ps or exceed the
supported hardware range.
Fixes: ea77dbbdbc ("net: stmmac: add Eswin EIC7700 glue driver")
Signed-off-by: Zhi Li <lizhi2@eswincomputing.com>
Link: https://patch.msgid.link/20260518022214.507-1-lizhi2@eswincomputing.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The EIC7700 MAC implements programmable RGMII delay adjustment with a
granularity of 20 ps per hardware step.
The driver previously converted rx-internal-delay-ps and
tx-internal-delay-ps values using a 100 ps step size, resulting in
incorrect delay programming.
Update the conversion to use the correct 20 ps granularity so the
programmed delay matches the values described in the device tree.
Fixes: ea77dbbdbc ("net: stmmac: add Eswin EIC7700 glue driver")
Signed-off-by: Zhi Li <lizhi2@eswincomputing.com>
Link: https://patch.msgid.link/20260518022156.484-1-lizhi2@eswincomputing.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Clear the TXD and RXD delay control registers during EIC7700 DWMAC
initialization.
These registers may retain values programmed by the bootloader. If left
unchanged, residual delays can alter the effective RGMII timing seen by
the MAC and override the configuration described by the device tree.
This may violate the expected RGMII timing model and can cause link
instability or prevent the Ethernet controller from operating correctly.
Explicitly clearing these registers ensures that the MAC delay settings
are determined solely by the kernel configuration.
The corresponding register offsets are optional, and the registers are
only cleared when the offsets are provided in the device tree.
Fixes: ea77dbbdbc ("net: stmmac: add Eswin EIC7700 glue driver")
Signed-off-by: Zhi Li <lizhi2@eswincomputing.com>
Link: https://patch.msgid.link/20260518022137.464-1-lizhi2@eswincomputing.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Fix the initialization ordering of the HSP CSR configuration in the
EIC7700 DWMAC glue driver.
The HSP CSR registers control MAC-side RGMII delay behavior and must
only be accessed after the corresponding clocks are enabled. The
previous implementation could trigger register access before clock
enablement, leading to undefined behavior depending on boot state.
Move the HSP CSR configuration into the post-clock-enable initialization
path to ensure all register accesses occur under valid clock domains.
This change ensures deterministic initialization and prevents
clock-dependent register access failures during probe or resume.
Fixes: ea77dbbdbc ("net: stmmac: add Eswin EIC7700 glue driver")
Signed-off-by: Zhi Li <lizhi2@eswincomputing.com>
Link: https://patch.msgid.link/20260518022055.444-1-lizhi2@eswincomputing.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Document two optional cells in eswin,hsp-sp-csr for the TXD and RXD
delay control register offsets.
These registers are used by the driver to clear any residual delay
configuration left by the bootloader, ensuring that MAC-side RGMII delay
settings are applied solely according to the kernel configuration.
Add a reference to the EIC7700X SoC Technical Reference Manual for
background information about the HSP CSR block.
Fixes: 888bd0eca9 ("dt-bindings: ethernet: eswin: Document for EIC7700 SoC")
Signed-off-by: Zhi Li <lizhi2@eswincomputing.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260518022023.427-1-lizhi2@eswincomputing.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Two frag-transfer helpers (__pskb_copy_fclone() and skb_shift()) fail
to propagate the SKBFL_SHARED_FRAG bit in skb_shinfo()->flags when
moving frags from source to destination. __pskb_copy_fclone() defers
the rest of the shinfo metadata to skb_copy_header() after copying
frag descriptors, but that helper only carries over gso_{size,segs,
type} and never touches skb_shinfo()->flags; skb_shift() moves frag
descriptors directly and leaves flags untouched. As a result, the
destination skb keeps a reference to the same externally-owned or
page-cache-backed pages while reporting skb_has_shared_frag() as
false.
The mismatch is harmful in any in-place writer that uses
skb_has_shared_frag() to decide whether shared pages must be detoured
through skb_cow_data(). ESP input is one such writer (esp4.c,
esp6.c), and a single nft 'dup to <local>' rule -- or any other
nf_dup_ipv4() / xt_TEE caller -- is enough to land a pskb_copy()'d
skb in esp_input() with the marker stripped, letting an unprivileged
user write into the page cache of a root-owned read-only file via
authencesn-ESN stray writes.
Set SKBFL_SHARED_FRAG on the destination whenever frag descriptors
were actually moved from the source. skb_copy() and skb_copy_expand()
share skb_copy_header() too but linearize all paged data into freshly
allocated head storage and emerge with nr_frags == 0, so
skb_has_shared_frag() returns false on its own; they need no change.
The same omission exists in skb_gro_receive() and skb_gro_receive_list().
The former moves the incoming skb's frag descriptors into the
accumulator's last sub-skb via two paths (a direct frag-move loop and
the head_frag + memcpy path); the latter chains the incoming skb whole
onto p's frag_list. Downstream skb_segment() reads only
skb_shinfo(p)->flags, and skb_segment_list() reuses each sub-skb's
shinfo as the nskb -- both p and lp must carry the marker.
The same omission also exists in tcp_clone_payload(), which builds an
MTU probe skb by moving frag descriptors from skbs on sk_write_queue
into a freshly allocated nskb. The helper falls into the same family
and warrants the same fix for consistency; no TCP TX-side in-place
writer is currently known to reach a user page through this gap, but
a future consumer depending on the marker would regress silently.
The same omission exists in skb_segment(): the per-iteration flag
merge takes only head_skb's flag, and the inner switch that rebinds
frag_skb to list_skb on head_skb-frags exhaustion does not fold the
new frag_skb's flag into nskb. Fold frag_skb's flag at both sites
so segments drawing frags from frag_list members carry the marker.
Fixes: cef401de7b ("net: fix possible wrong checksum generation")
Fixes: f4c50a4034 ("xfrm: esp: avoid in-place decrypt on shared skb frags")
Suggested-by: Sabrina Dubroca <sd@queasysnail.net>
Suggested-by: Sultan Alsawaf <sultan@kerneltoast.com>
Suggested-by: Ben Hutchings <ben@decadent.org.uk>
Suggested-by: Lin Ma <malin89@huawei.com>
Suggested-by: Jingguo Tan <tanjingguo@huawei.com>
Suggested-by: Aaron Esau <aaron1esau@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Tested-by: Rajat Gupta <rajat.gupta@oss.qualcomm.com>
Link: https://patch.msgid.link/ageeJfJHwgzmKXbh@v4bel
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Blamed commit moved the TIME_WAIT-derived ISN from the skb control
block to a per-CPU variable, assuming the value would always be consumed
by tcp_conn_request() for the same packet that wrote it. That assumption
is violated by multiple drop paths between the producer
(__this_cpu_write(tcp_tw_isn, isn) in tcp_v{4,6}_rcv()) and the consumer
(tcp_conn_request()):
- min_ttl / min_hopcount check
- xfrm policy check
- tcp_inbound_hash() MD5/AO mismatch
- tcp_filter() eBPF/SO_ATTACH_FILTER drop
- th->syn && th->fin discard in tcp_rcv_state_process() TCP_LISTEN
- psp_sk_rx_policy_check() in tcp_v{4,6}_do_rcv()
- tcp_checksum_complete() in tcp_v{4,6}_do_rcv()
- tcp_v{4,6}_cookie_check() returning NULL
When a packet is dropped on any of these paths, tcp_tw_isn is left set.
The next SYN processed on the same CPU then consumes the non zero value in
tcp_conn_request(), receiving a potentially predictable ISN.
This patch moves back tcp_tw_isn to skb->cb[], getting rid of the per-cpu
variable.
Note that tcp_v{4,6}_fill_cb() do not set it.
Very litle impact on overall code size/complexity:
$ scripts/bloat-o-meter -t vmlinux.old vmlinux.new
add/remove: 0/0 grow/shrink: 2/1 up/down: 8/-15 (-7)
Function old new delta
tcp_v6_rcv 3038 3042 +4
tcp_v4_rcv 3035 3039 +4
tcp_conn_request 2938 2923 -15
Total: Before=24436060, After=24436053, chg -0.00%
Fixes: 41eecbd712 ("tcp: replace TCP_SKB_CB(skb)->tcp_tw_isn with a per-cpu field")
Reported-by: Chris Mason <clm@meta.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260519084611.2485277-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
vmci_transport_recv_connecting_server() returned err = 0 for a peer
RST in its default switch arm:
err = pkt->type == VMCI_TRANSPORT_PACKET_TYPE_RST ? 0 : -EINVAL;
That made vmci_transport_recv_listen() skip vsock_remove_pending(),
leaving the pending socket on the listener's pending_links with
sk_state = TCP_CLOSE while destroy: still dropped the explicit
reference taken before schedule_delayed_work().
One second later vsock_pending_work() observed is_pending=true and
performed full cleanup: vsock_remove_pending() then the two trailing
sock_put(sk) calls -- the first reached refcount 0 and __sk_freed
the socket, and the second wrote into the freed object:
BUG: KASAN: slab-use-after-free in refcount_warn_saturate
Write of size 4 at addr ffff88800b1cac80 by task kworker
Workqueue: events vsock_pending_work
Treat peer RST like any other unexpected packet type (err = -EINVAL).
All destroy: arms now return err < 0, so vmci_transport_recv_listen()
removes pending from pending_links synchronously and
vsock_pending_work() takes the is_pending=false / !rejected branch,
dropping only its own work reference. This also closes the
multi-packet race Sashiko reported on v2: pending is removed from
the list before any subsequent packet can find it.
The pre-existing sk_acceptq_removed() gap on the err < 0 path of
vmci_transport_recv_listen() that Sashiko also noted is not
introduced or changed by this patch.
Tested on lts-6.12.79 with KASAN: 52/100 unpatched -> 0/100 patched.
Fixes: d021c34405 ("VSOCK: Introduce VM Sockets")
Cc: stable@vger.kernel.org
Signed-off-by: Minh Nguyen <minhnguyen.080505@gmail.com>
Acked-by: Bryan Tan <bryan-bt.tan@broadcom.com>
Link: https://patch.msgid.link/20260519102310.237181-1-minhnguyen.080505@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If zl3073x_dpll_pin_register() fails, the allocated pin is not yet
added to zldpll->pins list. The error path calls
zl3073x_dpll_pins_unregister() which only iterates pins on the list,
so the current pin is leaked. Free the pin before jumping to the error
label.
Additionally move the pin->dpll_pin = NULL assignment in
zl3073x_dpll_pin_register() from err_register to the common
err_pin_get path. When dpll_pin_get() fails, pin->dpll_pin holds an
ERR_PTR value. Without this fix the subsequent zl3073x_dpll_pin_free()
would trigger a spurious WARN because it checks pin->dpll_pin for
non-NULL.
Fixes: 75a71ecc24 ("dpll: zl3073x: Register DPLL devices and pins")
Reviewed-by: Petr Oros <poros@redhat.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20260519132205.161847-1-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net_devmem_bind_dmabuf() trusts dmabuf->size and sg_dma_len() to be
PAGE_SIZE multiples without checking:
- tx_vec is sized dmabuf->size / PAGE_SIZE, and
net_devmem_get_niov_at() only bounds-checks virt_addr < dmabuf->size
before indexing tx_vec[virt_addr / PAGE_SIZE]. With size =
N*PAGE_SIZE + r (1 <= r < PAGE_SIZE), sendmsg() at iov_base =
N*PAGE_SIZE passes the bound check and reads tx_vec[N] -- one past.
- owner->area.num_niovs = len / PAGE_SIZE while gen_pool_add_owner()
covers the full byte len, so a non-page-multiple non-final sg
desyncs num_niovs from the gen_pool region for every later sg, on
both RX and TX.
dma-buf does not require page-aligned sizes, so the bind path has to
enforce what its own indexing assumes. Reject both with -EINVAL.
The size check is TX-only (only tx_vec is sized off dmabuf->size); the
SG-length check covers both directions.
Fixes: bd61848900 ("net: devmem: Implement TX path")
Cc: stable@vger.kernel.org
Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Bobby Eshleman <bobbyeshleman@meta.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20260519203530.66310-1-devnexen@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- hci_sync: Fix not setting mask for HCI_EVT_LE_ALL_REMOTE_FEATURES_COMPLETE
- L2CAP: fix UAF in l2cap_sock_cleanup_listen() vs l2cap_conn_del()
- ISO: drop ISO_END frames received without prior ISO_START
- MGMT: validate Add Extended Advertising Data length
- bnep: Fix UAF read of dev->name
- btmtk: fix urb->setup_packet leak in error paths
- btintel_pcie: Fix incorrect MAC access programming
- hci_uart: fix UAFs and race conditions in close and init paths
* tag 'for-net-2026-05-20' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: fix UAF in l2cap_sock_cleanup_listen() vs l2cap_conn_del()
Bluetooth: hci_uart: fix UAFs and race conditions in close and init paths
Bluetooth: MGMT: validate Add Extended Advertising Data length
Bluetooth: btmtk: fix urb->setup_packet leak in error paths
Bluetooth: ISO: drop ISO_END frames received without prior ISO_START
Bluetooth: btintel_pcie: Fix incorrect MAC access programming
Bluetooth: hci_sync: Fix not setting mask for HCI_EVT_LE_ALL_REMOTE_FEATURES_COMPLETE
Bluetooth: bnep: Fix UAF read of dev->name
====================
Link: https://patch.msgid.link/20260520204959.2902497-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Xingwang Xiang says:
====================
bpf, skmsg: fix verdict sk_data_ready racing with ktls rx
sk_psock_verdict_data_ready() lacks the tls_sw_has_ctx_rx() guard that
sk_psock_strp_data_ready() gained in e91de6afa8. When a socket is
inserted into a sockmap (BPF_SK_SKB_VERDICT) before TLS RX is configured,
the missing guard causes tcp_read_skb() to drain sk_receive_queue without
advancing copied_seq, leaving a dangling frag_list pointer that
tls_decrypt_sg() walks — a use-after-free.
Patch 1 mirrors the fix from e91de6afa8: add the tls_sw_has_ctx_rx()
check to sk_psock_verdict_data_ready() so that when a TLS RX context is
present the function defers to psock->saved_data_ready (sock_def_readable)
instead of calling tcp_read_skb().
Patch 2 adds a selftest that drives the vulnerable sequence end-to-end
and verifies recv() returns the correct decrypted data.
====================
Link: https://patch.msgid.link/20260517145630.20521-1-v3rdant.xiang@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test the scenario where a socket is inserted into a sockmap with a
BPF_SK_SKB_VERDICT program before TLS RX is configured. Previously
sk_psock_verdict_data_ready() would call tcp_read_skb() and drain the
receive queue without advancing copied_seq, causing tls_decrypt_sg()
to walk a dangling frag_list pointer (use-after-free).
The test drives the full vulnerable sequence and verifies that after
the fix recv() returns the correct decrypted data.
Signed-off-by: Xingwang Xiang <v3rdant.xiang@gmail.com>
Link: https://patch.msgid.link/20260517145630.20521-3-v3rdant.xiang@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sk_psock_strp_data_ready() already checks tls_sw_has_ctx_rx() and
defers to psock->saved_data_ready when a TLS RX context is present,
avoiding a conflict with the TLS strparser's ownership of the receive
queue (commit e91de6afa8, "bpf: Fix running sk_skb program types
with ktls").
sk_psock_verdict_data_ready() has no equivalent guard. When a socket
is inserted into a sockmap (BPF_SK_SKB_VERDICT) before TLS RX is
configured, tls_sw_strparser_arm() saves sk_psock_verdict_data_ready
as rx_ctx->saved_data_ready. On data arrival:
tls_data_ready -> tls_strp_data_ready -> tls_rx_msg_ready
-> saved_data_ready() = sk_psock_verdict_data_ready()
-> tcp_read_skb() drains sk_receive_queue via __skb_unlink()
without calling tcp_eat_skb(), so copied_seq is not advanced.
tls_strp_msg_load() then finds tcp_inq() >= full_len (stale), calls
tcp_recv_skb() on the now-empty queue, hits WARN_ON_ONCE(!first), and
returns with rx_ctx->strp.anchor.frag_list pointing at a psock-owned
(potentially freed) skb. tls_decrypt_sg() subsequently walks that
frag_list: use-after-free.
Apply the same fix as sk_psock_strp_data_ready(): if a TLS RX context
is present, call psock->saved_data_ready (sock_def_readable) to wake
recv() waiters and return immediately, leaving the receive queue
untouched. TLS retains sole ownership of the queue and decrypts the
record normally through tls_sw_recvmsg().
Fixes: ef5659280e ("bpf, sockmap: Allow skipping sk_skb parser program")
Signed-off-by: Xingwang Xiang <v3rdant.xiang@gmail.com>
Link: https://patch.msgid.link/20260517145630.20521-2-v3rdant.xiang@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
David Howells says:
====================
rxrpc: Better fix for DATA/RESPONSE decrypt vs splice()
Here are two patches containing better fixes for the in-place decryption of
DATA and RESPONSE packets that can corrupt pagecache spliced into UDP
packets and sent to an AF_RXRPC server [CVE-2026-43500], plus a patch to
precheck the length of rxgk-secured DATA packets.
Of the main patches, one patch fixes DATA decryption by having recvmsg
unconditionally extract the data into a flat bounce buffer and, if need be,
decrypt it there. It doesn't seem to cause a performance problem to do
this even on unencrypted packets; for encrypted packets it makes sure the
content is correctly aligned for crypto which seems to get a small
performance gain.
Further, it means that DATA packets are no longer copied in the I/O thread,
avoiding a slowdown of the protocol engine that runs there.
The other main patch fixes RESPONSE decryption by having the connection
event handler worker copy the data to a flat buffer and, again, decrypt it
there. This simplifies RESPONSE handling.
With these two fixes, the data content of the received sk_buff no longer
gets altered.
====================
Link: https://patch.msgid.link/20260515230516.2718212-1-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This improves the fix for CVE-2026-43500.
Fix the pagecache corruption from in-place decryption of a DATA packet
transmitted locally by splice() by getting rid of the packet sharing in the
I/O thread and unconditionally extracting the packet content into a bounce
buffer in which the buffer is decrypted. recvmsg() (or the kernel
equivalent) then copies the data from the bounce buffer to the destination
buffer. The sk_buff then remains unmodified.
This has an additional advantage in that the packet is then arranged in the
buffer with the correct alignment required for the crypto algorithms to
process directly. The performance of the crypto does seem to be a little
faster and, surprisingly, the unencrypted performance doesn't seem to
change much - possibly due to removing complexity from the I/O thread.
Yet another advantage is that the I/O thread doesn't have to copy packets
which would slow down packet distribution, ACK generation, etc..
The buffer belongs to the call and is allocated initially at 2K,
sufficiently large to hold a whole jumbo subpacket, but the buffer will be
increased in size if needed. However, to take this work, MSG_PEEK may
cause a later packet to be decrypted into the buffer, in which case the
earlier one will need re-decrypting for a subsequent recvmsg().
Note that rx_pkt_offset may legitimately see 0 as a valid offset now, so
switch to using USHRT_MAX to indicate an invalid offset.
Note also that I would generally prefer to replace the buffers of the
current sk_buff with a new kmalloc'd buffer of the right size, ditching the
old data and frags as this makes the handling of MSG_PEEK easier and
removes the re-decryption issue, but this looks like quite a complicated
thing to achieve. skb_morph() looks half way to what I want, but I don't
want to have to allocate a new sk_buff.
Fixes: d0d5c0cd1e ("rxrpc: Use skb_unshare() rather than skb_cow_data()")
Reported-by: Hyunwoo Kim <imv4bel@gmail.com>
Closes: https://lore.kernel.org/r/afKV2zGR6rrelPC7@v4bel/
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Simon Horman <horms@kernel.org>
cc: Jiayuan Chen <jiayuan.chen@linux.dev>
cc: linux-afs@lists.infradead.org
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
Link: https://patch.msgid.link/20260515230516.2718212-3-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Recent commit changed the semantics from NOT_VALID to VALID.
I didn't realize that the flags are not stored atomically
with the entry in XArray. There's still a race of reader
observing a VALID mark for a slot, getting interrupted,
writer replacing the entry with a different one, reader
continuing, fetching the entry which is now a different
pointer than the pointer for which VALID was meant.
The biggest consequence of this is that we may see a UAF
since net_shaper_rollback() assumed that entries without
VALID can be freed without observing RCU.
Looks like the XArray marks are buying us nothing at this
point. Let's convert the code to an explicit valid field.
The smp_load_acquire() / smp_store_release() barriers are
marginally cleaner.
Reported-by: Sashiko <sashiko-bot@kernel.org>
Fixes: 93954b40f6 ("net-shapers: implement NL set and delete operations")
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260515221325.1685455-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
