Several file system notification system headers have "writable"
misspelled as "writtable" in the comments. This patch fixes it in the
fanotify header.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20240306020831.1404033-3-vi@endrift.com>
Several file system notification system headers have "writable"
misspelled as "writtable" in the comments. This patch fixes it in the
fsnotify header.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20240306020831.1404033-2-vi@endrift.com>
Several file system notification system headers have "writable"
misspelled as "writtable" in the comments. This patch fixes it in the
inotify header.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20240306020831.1404033-1-vi@endrift.com>
Instead of opencoded checks for number of fsnotify connectors add a
helper fsnotify_sb_has_watchers().
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
If parent inode is not watching, check for the event in masks of
sb/mount/inode masks early to optimize out most of the code in
__fsnotify_parent() and avoid calling fsnotify().
Jens has reported that this optimization improves BW and IOPS in an
io_uring benchmark by more than 10% and reduces perf reported CPU usage.
before:
+ 4.51% io_uring [kernel.vmlinux] [k] fsnotify
+ 3.67% io_uring [kernel.vmlinux] [k] __fsnotify_parent
after:
+ 2.37% io_uring [kernel.vmlinux] [k] __fsnotify_parent
Reported-and-tested-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/linux-fsdevel/b45bd8ff-5654-4e67-90a6-aad5e6759e0b@kernel.dk/
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20240116113247.758848-1-amir73il@gmail.com>
Pull tracing and eventfs fixes from Steven Rostedt:
- Fix histogram tracing_map insertion.
The tracing_map_insert copies the value into the elt variable and
then assigns the elt to the entry value. But it is possible that the
entry value becomes visible on other CPUs before the elt is fully
initialized. This is fixed by adding a wmb() between the
initialization of the elt variable and assigning it.
- Have eventfs directory have unique inode numbers.
Having them be all the same proved to be a failure as the 'find'
application will think that the directories are causing loops, as it
checks for directory loops via their inodes. Have the evenfs dir
entries get their inodes assigned when they are referenced and then
save them in the eventfs_inode structure.
* tag 'trace-v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
eventfs: Save directory inodes in the eventfs_inode structure
tracing: Ensure visibility when inserting an element into tracing_map
The eventfs inodes and directories are allocated when referenced. But this
leaves the issue of keeping consistent inode numbers and the number is
only saved in the inode structure itself. When the inode is no longer
referenced, it can be freed. When the file that the inode was representing
is referenced again, the inode is once again created, but the inode number
needs to be the same as it was before.
Just making the inode numbers the same for all files is fine, but that
does not work with directories. The find command will check for loops via
the inode number and having the same inode number for directories triggers:
# find /sys/kernel/tracing
find: File system loop detected;
'/sys/kernel/debug/tracing/events/initcall/initcall_finish' is part of the same file system loop as
'/sys/kernel/debug/tracing/events/initcall'.
[..]
Linus pointed out that the eventfs_inode structure ends with a single
32bit int, and on 64 bit machines, there's likely a 4 byte hole due to
alignment. We can use this hole to store the inode number for the
eventfs_inode. All directories in eventfs are represented by an
eventfs_inode and that data structure can hold its inode number.
That last int was also purposely placed at the end of the structure to
prevent holes from within. Now that there's a 4 byte number to hold the
inode, both the inode number and the last integer can be moved up in the
structure for better cache locality, where the llist and rcu fields can be
moved to the end as they are only used when the eventfs_inode is being
deleted.
Link: https://lore.kernel.org/all/CAMuHMdXKiorg-jiuKoZpfZyDJ3Ynrfb8=X+c7x0Eewxn-YRdCA@mail.gmail.com/
Link: https://lore.kernel.org/linux-trace-kernel/20240122152748.46897388@gandalf.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Fixes: 53c41052ba ("eventfs: Have the inodes all for files and directories all be the same")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
The QXL driver doesn't use any device for DMA mappings or allocations so
dev_to_node() will panic inside ttm_device_init() on NUMA systems:
general protection fault, probably for non-canonical address 0xdffffc000000007a: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x00000000000003d0-0x00000000000003d7]
CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.7.0+ #9
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014
RIP: 0010:ttm_device_init+0x10e/0x340
Call Trace:
qxl_ttm_init+0xaa/0x310
qxl_device_init+0x1071/0x2000
qxl_pci_probe+0x167/0x3f0
local_pci_probe+0xe1/0x1b0
pci_device_probe+0x29d/0x790
really_probe+0x251/0x910
__driver_probe_device+0x1ea/0x390
driver_probe_device+0x4e/0x2e0
__driver_attach+0x1e3/0x600
bus_for_each_dev+0x12d/0x1c0
bus_add_driver+0x25a/0x590
driver_register+0x15c/0x4b0
qxl_pci_driver_init+0x67/0x80
do_one_initcall+0xf5/0x5d0
kernel_init_freeable+0x637/0xb10
kernel_init+0x1c/0x2e0
ret_from_fork+0x48/0x80
ret_from_fork_asm+0x1b/0x30
RIP: 0010:ttm_device_init+0x10e/0x340
Fall back to NUMA_NO_NODE if there is no device for DMA.
Found by Linux Verification Center (linuxtesting.org).
Fixes: b0a7ce53d4 ("drm/ttm: Schedule delayed_delete worker closer")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Running the following two commands in parallel on a multi-processor
AArch64 machine can sporadically produce an unexpected warning about
duplicate histogram entries:
$ while true; do
echo hist:key=id.syscall:val=hitcount > \
/sys/kernel/debug/tracing/events/raw_syscalls/sys_enter/trigger
cat /sys/kernel/debug/tracing/events/raw_syscalls/sys_enter/hist
sleep 0.001
done
$ stress-ng --sysbadaddr $(nproc)
The warning looks as follows:
[ 2911.172474] ------------[ cut here ]------------
[ 2911.173111] Duplicates detected: 1
[ 2911.173574] WARNING: CPU: 2 PID: 12247 at kernel/trace/tracing_map.c:983 tracing_map_sort_entries+0x3e0/0x408
[ 2911.174702] Modules linked in: iscsi_ibft(E) iscsi_boot_sysfs(E) rfkill(E) af_packet(E) nls_iso8859_1(E) nls_cp437(E) vfat(E) fat(E) ena(E) tiny_power_button(E) qemu_fw_cfg(E) button(E) fuse(E) efi_pstore(E) ip_tables(E) x_tables(E) xfs(E) libcrc32c(E) aes_ce_blk(E) aes_ce_cipher(E) crct10dif_ce(E) polyval_ce(E) polyval_generic(E) ghash_ce(E) gf128mul(E) sm4_ce_gcm(E) sm4_ce_ccm(E) sm4_ce(E) sm4_ce_cipher(E) sm4(E) sm3_ce(E) sm3(E) sha3_ce(E) sha512_ce(E) sha512_arm64(E) sha2_ce(E) sha256_arm64(E) nvme(E) sha1_ce(E) nvme_core(E) nvme_auth(E) t10_pi(E) sg(E) scsi_mod(E) scsi_common(E) efivarfs(E)
[ 2911.174738] Unloaded tainted modules: cppc_cpufreq(E):1
[ 2911.180985] CPU: 2 PID: 12247 Comm: cat Kdump: loaded Tainted: G E 6.7.0-default #2 1b58bbb22c97e4399dc09f92d309344f69c44a01
[ 2911.182398] Hardware name: Amazon EC2 c7g.8xlarge/, BIOS 1.0 11/1/2018
[ 2911.183208] pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
[ 2911.184038] pc : tracing_map_sort_entries+0x3e0/0x408
[ 2911.184667] lr : tracing_map_sort_entries+0x3e0/0x408
[ 2911.185310] sp : ffff8000a1513900
[ 2911.185750] x29: ffff8000a1513900 x28: ffff0003f272fe80 x27: 0000000000000001
[ 2911.186600] x26: ffff0003f272fe80 x25: 0000000000000030 x24: 0000000000000008
[ 2911.187458] x23: ffff0003c5788000 x22: ffff0003c16710c8 x21: ffff80008017f180
[ 2911.188310] x20: ffff80008017f000 x19: ffff80008017f180 x18: ffffffffffffffff
[ 2911.189160] x17: 0000000000000000 x16: 0000000000000000 x15: ffff8000a15134b8
[ 2911.190015] x14: 0000000000000000 x13: 205d373432323154 x12: 5b5d313131333731
[ 2911.190844] x11: 00000000fffeffff x10: 00000000fffeffff x9 : ffffd1b78274a13c
[ 2911.191716] x8 : 000000000017ffe8 x7 : c0000000fffeffff x6 : 000000000057ffa8
[ 2911.192554] x5 : ffff0012f6c24ec0 x4 : 0000000000000000 x3 : ffff2e5b72b5d000
[ 2911.193404] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0003ff254480
[ 2911.194259] Call trace:
[ 2911.194626] tracing_map_sort_entries+0x3e0/0x408
[ 2911.195220] hist_show+0x124/0x800
[ 2911.195692] seq_read_iter+0x1d4/0x4e8
[ 2911.196193] seq_read+0xe8/0x138
[ 2911.196638] vfs_read+0xc8/0x300
[ 2911.197078] ksys_read+0x70/0x108
[ 2911.197534] __arm64_sys_read+0x24/0x38
[ 2911.198046] invoke_syscall+0x78/0x108
[ 2911.198553] el0_svc_common.constprop.0+0xd0/0xf8
[ 2911.199157] do_el0_svc+0x28/0x40
[ 2911.199613] el0_svc+0x40/0x178
[ 2911.200048] el0t_64_sync_handler+0x13c/0x158
[ 2911.200621] el0t_64_sync+0x1a8/0x1b0
[ 2911.201115] ---[ end trace 0000000000000000 ]---
The problem appears to be caused by CPU reordering of writes issued from
__tracing_map_insert().
The check for the presence of an element with a given key in this
function is:
val = READ_ONCE(entry->val);
if (val && keys_match(key, val->key, map->key_size)) ...
The write of a new entry is:
elt = get_free_elt(map);
memcpy(elt->key, key, map->key_size);
entry->val = elt;
The "memcpy(elt->key, key, map->key_size);" and "entry->val = elt;"
stores may become visible in the reversed order on another CPU. This
second CPU might then incorrectly determine that a new key doesn't match
an already present val->key and subsequently insert a new element,
resulting in a duplicate.
Fix the problem by adding a write barrier between
"memcpy(elt->key, key, map->key_size);" and "entry->val = elt;", and for
good measure, also use WRITE_ONCE(entry->val, elt) for publishing the
element. The sequence pairs with the mentioned "READ_ONCE(entry->val);"
and the "val->key" check which has an address dependency.
The barrier is placed on a path executed when adding an element for
a new key. Subsequent updates targeting the same key remain unaffected.
From the user's perspective, the issue was introduced by commit
c193707dde ("tracing: Remove code which merges duplicates"), which
followed commit cbf4100efb ("tracing: Add support to detect and avoid
duplicates"). The previous code operated differently; it inherently
expected potential races which result in duplicates but merged them
later when they occurred.
Link: https://lore.kernel.org/linux-trace-kernel/20240122150928.27725-1-petr.pavlu@suse.com
Fixes: c193707dde ("tracing: Remove code which merges duplicates")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Acked-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Pull btrfs fixes from David Sterba:
- zoned mode fixes:
- fix slowdown when writing large file sequentially by looking up
block groups with enough space faster
- locking fixes when activating a zone
- new mount API fixes:
- preserve mount options for a ro/rw mount of the same subvolume
- scrub fixes:
- fix use-after-free in case the chunk length is not aligned to
64K, this does not happen normally but has been reported on
images converted from ext4
- similar alignment check was missing with raid-stripe-tree
- subvolume deletion fixes:
- prevent calling ioctl on already deleted subvolume
- properly track flag tracking a deleted subvolume
- in subpage mode, fix decompression of an inline extent (zlib, lzo,
zstd)
- fix crash when starting writeback on a folio, after integration with
recent MM changes this needs to be started conditionally
- reject unknown flags in defrag ioctl
- error handling, API fixes, minor warning fixes
* tag 'for-6.8-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: scrub: limit RST scrub to chunk boundary
btrfs: scrub: avoid use-after-free when chunk length is not 64K aligned
btrfs: don't unconditionally call folio_start_writeback in subpage
btrfs: use the original mount's mount options for the legacy reconfigure
btrfs: don't warn if discard range is not aligned to sector
btrfs: tree-checker: fix inline ref size in error messages
btrfs: zstd: fix and simplify the inline extent decompression
btrfs: lzo: fix and simplify the inline extent decompression
btrfs: zlib: fix and simplify the inline extent decompression
btrfs: defrag: reject unknown flags of btrfs_ioctl_defrag_range_args
btrfs: avoid copying BTRFS_ROOT_SUBVOL_DEAD flag to snapshot of subvolume being deleted
btrfs: don't abort filesystem when attempting to snapshot deleted subvolume
btrfs: zoned: fix lock ordering in btrfs_zone_activate()
btrfs: fix unbalanced unlock of mapping_tree_lock
btrfs: ref-verify: free ref cache before clearing mount opt
btrfs: fix kvcalloc() arguments order in btrfs_ioctl_send()
btrfs: zoned: optimize hint byte for zoned allocator
btrfs: zoned: factor out prepare_allocation_zoned()
Pull stringop-overflow warning update from Gustavo A. R. Silva:
"Enable -Wstringop-overflow globally.
I waited for the release of -rc1 to run a final build-test on top of
it before sending this pull request. Fortunatelly, after building 358
kernels overnight (basically all supported archs with a wide variety
of configs), no more warnings have surfaced! :)
Thus, we are in a good position to enable this compiler option for all
versions of GCC that support it, with the exception of GCC-11, which
appears to have some issues with this option [1]"
Link: https://lore.kernel.org/lkml/b3c99290-40bc-426f-b3d2-1aa903f95c4e@embeddedor.com/ [1]
* tag 'Wstringop-overflow-for-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
init: Kconfig: Disable -Wstringop-overflow for GCC-11
Makefile: Enable -Wstringop-overflow globally
Pull xen netback fix from Juergen Gross:
"Transmit requests in Xen's virtual network protocol can consist of
multiple parts. While not really useful, except for the initial part
any of them may be of zero length, i.e. carry no data at all.
Besides a certain initial portion of the to be transferred data, these
parts are directly translated into what Linux calls SKB fragments.
Such converted request parts can, when for a particular SKB they are
all of length zero, lead to a de-reference of NULL in core networking
code"
* tag 'xsa448-6.8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen-netback: don't produce zero-size SKB frags
It seems that we have finished addressing all the remaining
issues regarding -Wstringop-overflow. So, we are now in good
shape to enable this compiler option globally.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Pull more bcachefs updates from Kent Overstreet:
"Some fixes, Some refactoring, some minor features:
- Assorted prep work for disk space accounting rewrite
- BTREE_TRIGGER_ATOMIC: after combining our trigger callbacks, this
makes our trigger context more explicit
- A few fixes to avoid excessive transaction restarts on
multithreaded workloads: fstests (in addition to ktest tests) are
now checking slowpath counters, and that's shaking out a few bugs
- Assorted tracepoint improvements
- Starting to break up bcachefs_format.h and move on disk types so
they're with the code they belong to; this will make room to start
documenting the on disk format better.
- A few minor fixes"
* tag 'bcachefs-2024-01-21' of https://evilpiepirate.org/git/bcachefs: (46 commits)
bcachefs: Improve inode_to_text()
bcachefs: logged_ops_format.h
bcachefs: reflink_format.h
bcachefs; extents_format.h
bcachefs: ec_format.h
bcachefs: subvolume_format.h
bcachefs: snapshot_format.h
bcachefs: alloc_background_format.h
bcachefs: xattr_format.h
bcachefs: dirent_format.h
bcachefs: inode_format.h
bcachefs; quota_format.h
bcachefs: sb-counters_format.h
bcachefs: counters.c -> sb-counters.c
bcachefs: comment bch_subvolume
bcachefs: bch_snapshot::btime
bcachefs: add missing __GFP_NOWARN
bcachefs: opts->compression can now also be applied in the background
bcachefs: Prep work for variable size btree node buffers
bcachefs: grab s_umount only if snapshotting
...
Pull timer updates from Thomas Gleixner:
"Updates for time and clocksources:
- A fix for the idle and iowait time accounting vs CPU hotplug.
The time is reset on CPU hotplug which makes the accumulated
systemwide time jump backwards.
- Assorted fixes and improvements for clocksource/event drivers"
* tag 'timers-core-2024-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tick-sched: Fix idle and iowait sleeptime accounting vs CPU hotplug
clocksource/drivers/ep93xx: Fix error handling during probe
clocksource/drivers/cadence-ttc: Fix some kernel-doc warnings
clocksource/drivers/timer-ti-dm: Fix make W=n kerneldoc warnings
clocksource/timer-riscv: Add riscv_clock_shutdown callback
dt-bindings: timer: Add StarFive JH8100 clint
dt-bindings: timer: thead,c900-aclint-mtimer: separate mtime and mtimecmp regs
Pull powerpc fixes from Aneesh Kumar:
- Increase default stack size to 32KB for Book3S
Thanks to Michael Ellerman.
* tag 'powerpc-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: Increase default stack size to 32KB
Add a field to bch_snapshot for creation time; this will be important
when we start exposing the snapshot tree to userspace.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The "apply this compression method in the background" paths now use the
compression option if background_compression is not set; this means that
setting or changing the compression option will cause existing data to
be compressed accordingly in the background.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bcachefs btree nodes are big - typically 256k - and btree roots are
pinned in memory. As we're now up to 18 btrees, we now have significant
memory overhead in mostly empty btree roots.
And in the future we're going to start enforcing that certain btree node
boundaries exist, to solve lock contention issues - analagous to XFS's
AGIs.
Thus, we need to start allocating smaller btree node buffers when we
can. This patch changes code that refers to the filesystem constant
c->opts.btree_node_size to refer to the btree node buffer size -
btree_buf_bytes() - where appropriate.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The variable tmp is being assigned a value but it isn't being
read afterwards. The assignment is redundant and so tmp can be
removed.
Cleans up clang scan build warning:
warning: Although the value stored to 'ret' is used in the enclosing
expression, the value is never actually read from 'ret'
[deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
drop_locks_do() should not be used in a fastpath without first trying
the do in nonblocking mode - the unlock and relock will cause excessive
transaction restarts and potentially livelocking with other threads that
are contending for the same locks.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Factor out bch2_journal_bufs_to_text(), and use it in the
journal_entry_full() tracepoint; when we can't get a journal reservation
we need to know the outstanding journal entry sizes to know if the
problem is due to excessive flushing.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
When issuing discards, we may need to flush the journal if there's too
many buckets that can't be discarded until a journal flush.
But the heuristic was bad; we should be comparing the number of buckets
that need to flushes against the number of free buckets, not the number
of buckets we saw.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
