Make batadv_bla_check_duplist() just use the new function skb_crc32c(),
instead of calling skb_seq_read() with crc32c(). This is faster and
simpler.
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
This version will contain all the (major or even only minor) changes for
Linux 6.19.
The version number isn't a semantic version number with major and minor
information. It is just encoding the year of the expected publishing as
Linux -rc1 and the number of published versions this year (starting at 0).
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Trying to dump the originators or the neighbors via netlink for a meshif
with an inactive primary interface is not allowed. The dump functions were
checking this correctly but they didn't handle non-existing primary
interfaces and existing _inactive_ interfaces differently.
(Primary) batadv_hard_ifaces hold a references to a net_device. And
accessing them is only allowed when either being in a RCU/spinlock
protected section or when holding a valid reference to them. The netlink
dump functions use the latter.
But because the missing specific error handling for inactive primary
interfaces, the reference was never dropped. This reference counting error
was only detected when the interface should have been removed from the
system:
unregister_netdevice: waiting for batadv_slave_0 to become free. Usage count = 2
Cc: stable@vger.kernel.org
Fixes: 6ecc4fd6c2 ("batman-adv: netlink: reduce duplicate code by returning interfaces")
Reported-by: syzbot+881d65229ca4f9ae8c84@syzkaller.appspotmail.com
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
It is not necessary to include the header for the struct definition for an
"extern " declaration. It can simply be dropped from the headers to reduce
the number of includes the preprocessor has to process. If needed, it can
be added to the actual C source file.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
The batadv_skb_crc32() helper was shared between Bridge Loop Avoidance and
Network Coding. With the removal of the network coding feature, it is
possible to just move this helper directly to Bridge Loop Avoidance.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
The Network Coding feature, introduced in 2013, is based on the master
thesis "Inter-Flow Network Coding for Wireless Mesh Networks". It relies on
the assumption that neighboring mesh nodes can reliably overhear each
other's transmissions in promiscuous mode, allowing packets to be combined
to reduce forwarding overhead.
This assumption no longer holds for modern wireless mesh networks, which
are heterogeneous and make overhearing increasingly unreliable. Factors
such as multiple spatial streams, varying data rates, beamforming, and
OFDMA all prevent nodes from consistently overhearing each other. The current
implementation in batman-adv is not able to detect these conditions and would
require a more complex layer beyond its neighbor discovery process to do so.
In addition, the feature has been unmaintained for years and is discouraged
for use. None of the current maintainers have the required test
setup to verify its functionality, and known issues remain in its data
structures (reference counting, RCU usage, and cleanup handling). Its
continued presence also blocks necessary refactoring of the core originator
infrastructure.
Remove this obsolete and unmaintained feature.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Acked-by: Martin Hundebøll <martin@hundeboll.net>
Acked-by: Marek Lindner <marek.lindner@mailbox.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
This version will contain all the (major or even only minor) changes for
Linux 6.18.
The version number isn't a semantic version number with major and minor
information. It is just encoding the year of the expected publishing as
Linux -rc1 and the number of published versions this year (starting at 0).
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
batadv_nc_skb_decode_packet() trusts coded_len and checks only against
skb->len. XOR starts at sizeof(struct batadv_unicast_packet), reducing
payload headroom, and the source skb length is not verified, allowing an
out-of-bounds read and a small out-of-bounds write.
Validate that coded_len fits within the payload area of both destination
and source sk_buffs before XORing.
Fixes: 2df5278b02 ("batman-adv: network coding - receive coded packets and decode them")
Cc: stable@vger.kernel.org
Reported-by: Stanislav Fort <disclosure@aisle.com>
Signed-off-by: Stanislav Fort <stanislav.fort@aisle.com>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Simon Wunderlich says:
====================
This cleanup patchset includes the following patches:
- bump version strings, by Simon Wunderlich
- batman-adv: store hard_iface as iflink private data,
by Matthias Schiffer
* tag 'batadv-next-pullrequest-20250710' of git://git.open-mesh.org/linux-merge:
batman-adv: store hard_iface as iflink private data
batman-adv: Start new development cycle
====================
Link: https://patch.msgid.link/20250710164501.153872-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
By passing the hard_iface to netdev_master_upper_dev_link() as private
data, we can iterate over hardifs of a mesh interface more efficiently
using netdev_for_each_lower_private*() (instead of iterating over the
global hardif list). In addition, this will enable resolving a hardif
from its netdev using netdev_lower_dev_get_private() and getting rid of
the global list altogether in the following patches.
A similar approach can be seen in the bonding driver.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
This version will contain all the (major or even only minor) changes for
Linux 6.17.
The version number isn't a semantic version number with major and minor
information. It is just encoding the year of the expected publishing as
Linux -rc1 and the number of published versions this year (starting at 0).
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Simon Wunderlich says:
====================
Here is a batman-adv bugfix:
- fix duplicate MAC address check, by Matthias Schiffer
* tag 'batadv-net-pullrequest-20250509' of git://git.open-mesh.org/linux-merge:
batman-adv: fix duplicate MAC address check
====================
Link: https://patch.msgid.link/20250509090240.107796-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Simon Wunderlich says:
====================
This cleanup patchset includes the following patches:
- bump version strings, by Simon Wunderlich
- constify and move broadcast addr definition, Matthias Schiffer
- remove start/stop queue function for mesh-iface, by Antonio Quartulli
- switch to crc32 header for crc32c, by Sven Eckelmann
- drop unused net_namespace.h include, by Sven Eckelmann
* tag 'batadv-next-pullrequest-20250509' of git://git.open-mesh.org/linux-merge:
batman-adv: Drop unused net_namespace.h include
batman-adv: Switch to crc32 header for crc32c
batman-adv: no need to start/stop queue on mesh-iface
batman-adv: constify and move broadcast addr definition
batman-adv: Start new development cycle
====================
Link: https://patch.msgid.link/20250509091041.108416-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
batadv_check_known_mac_addr() is both too lenient and too strict:
- It is called from batadv_hardif_add_interface(), which means that it
checked interfaces that are not used for batman-adv at all. Move it
to batadv_hardif_enable_interface(). Also, restrict it to hardifs of
the same mesh interface; different mesh interfaces should not interact
at all. The batadv_check_known_mac_addr() argument is changed from
`struct net_device` to `struct batadv_hard_iface` to achieve this.
- The check only cares about hardifs in BATADV_IF_ACTIVE and
BATADV_IF_TO_BE_ACTIVATED states, but interfaces in BATADV_IF_INACTIVE
state should be checked as well, or the following steps will not
result in a warning then they should:
- Add two interfaces in down state with different MAC addresses to
a mesh as hardifs
- Change the MAC addresses so they conflict
- Set interfaces to up state
Now there will be two active hardifs with the same MAC address, but no
warning. Fix by only ignoring hardifs in BATADV_IF_NOT_IN_USE state.
The RCU lock can be dropped, as we're holding RTNL anyways when the
function is called.
Fixes: c6c8fea297 ("net: Add batman-adv meshing protocol")
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Since commit 69c7be1b90 ("rtnetlink: Pack newlink() params into struct"),
.newlink() doesn't use the struct net parameter. A type definition from
net_namespace.h is no longer needed.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
The crc32c() function was moved in commit 8df3682904 ("lib/crc32:
standardize on crc32c() name for Castagnoli CRC32") from linux/crc32c.h to
linux/crc32.h. The former is just an include file which redirects to the
latter.
Avoid the indirection by directly including the correct header file.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
The batman-adv mesh-iface is flagged with IFF_NO_QUEUE,
therefore there is no reason to start/stop any queue in
ndo_open/close.
Signed-off-by: Antonio Quartulli <antonio@mandelbit.com>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
This version will contain all the (major or even only minor) changes for
Linux 6.16.
The version number isn't a semantic version number with major and minor
information. It is just encoding the year of the expected publishing as
Linux -rc1 and the number of published versions this year (starting at 0).
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Pull CRC cleanups from Eric Biggers:
"Finish cleaning up the CRC kconfig options by removing the remaining
unnecessary prompts and an unnecessary 'default y', removing
CONFIG_LIBCRC32C, and documenting all the CRC library options"
* tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crc: remove CONFIG_LIBCRC32C
lib/crc: document all the CRC library kconfig options
lib/crc: remove unnecessary prompt for CONFIG_CRC_ITU_T
lib/crc: remove unnecessary prompt for CONFIG_CRC_T10DIF
lib/crc: remove unnecessary prompt for CONFIG_CRC16
lib/crc: remove unnecessary prompt for CONFIG_CRC_CCITT
lib/crc: remove unnecessary prompt for CONFIG_CRC32 and drop 'default y'
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cross-merge networking fixes after downstream PR (net-6.14-rc8).
Conflict:
tools/testing/selftests/net/Makefile
03544faad7 ("selftest: net: add proc_net_pktgen")
3ed61b8938 ("selftests: net: test for lwtunnel dst ref loops")
tools/testing/selftests/net/config:
85cb3711ac ("selftests: net: Add test cases for link and peer netns")
3ed61b8938 ("selftests: net: test for lwtunnel dst ref loops")
Adjacent commits:
tools/testing/selftests/net/Makefile
c935af429e ("selftests: net: add support for testing SO_RCVMARK and SO_RCVPRIORITY")
355d940f4d ("Revert "selftests: Add IPv6 link-local address generation tests for GRE devices."")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Simon Wunderlich says:
====================
Here is batman-adv bugfix:
- Ignore own maximum aggregation size during RX, Sven Eckelmann
* tag 'batadv-net-pullrequest-20250318' of git://git.open-mesh.org/linux-merge:
batman-adv: Ignore own maximum aggregation size during RX
====================
Link: https://patch.msgid.link/20250318150035.35356-1-sw@simonwunderlich.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Simon Wunderlich says:
====================
This feature/cleanup patchset includes the following patches:
- bump version strings, by Simon Wunderlich
- drop batadv_priv_debug_log struct, by Sven Eckelmann
- adopt netdev_hold() / netdev_put(), by Eric Dumazet
- add support for jumbo frames, by Sven Eckelmann
- use consistent name for mesh interface, by Sven Eckelmann
- cleanup B.A.T.M.A.N. IV OGM aggregation handling,
by Sven Eckelmann (4 patches)
- add missing newlines for log macros, by Sven Eckelmann
* tag 'batadv-next-pullrequest-20250313' of git://git.open-mesh.org/linux-merge:
batman-adv: add missing newlines for log macros
batman-adv: Limit aggregation size to outgoing MTU
batman-adv: Use actual packet count for aggregated packets
batman-adv: Switch to bitmap helper for aggregation handling
batman-adv: Limit number of aggregated packets directly
batman-adv: Use consistent name for mesh interface
batman-adv: Add support for jumbo frames
batman-adv: adopt netdev_hold() / netdev_put()
batman-adv: Drop batadv_priv_debug_log struct
batman-adv: Start new development cycle
====================
Link: https://patch.msgid.link/20250313164519.72808-1-sw@simonwunderlich.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Missing trailing newlines can lead to incomplete log lines that do not
appear properly in dmesg or in console output.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
If a B.A.T.M.A.N. IV aggregated OGM was prepared, it was always assumed
that 512 bytes (BATADV_MAX_AGGREGATION_BYTES) can be transmitted. But the
outgoing MTU might be too small for these 512 bytes and the aggregation
size must be adjusted in this case. Otherwise, the aggregates will cause
unnecessary packet loss.
For now, the non-aggregated packet length is not touched.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
The batadv_forw_packet->num_packets didn't store the number of packets but
the the number of packets - 1. This didn't had any effects on the actual
handling of aggregates but can easily be a source of confusion when reading
the code.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
The aggregation code duplicates code which already exists in the the bitops
and bitmap helper. By switching to the bitmap helpers, operating on larger
aggregations becomes possible without touching the different portions of
the code which read/modify direct_link_flags.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
The currently selected size in BATADV_MAX_AGGREGATION_BYTES (512) is chosen
such that the number of possible aggregated packets is lower than 32. This
number must be limited so that the type of
batadv_forw_packet->direct_link_flags has enough bits to represent each
packet (with the size of at least 24 bytes).
This requirement is better implemented in code instead of having it inside
a comment.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
The way how the virtual interface is called inside the batman-adv source
code is not consistent. The genl headers call it meshif and the rest of the
code calls is (mostly) softif.
The genl definitions cannot be touched because they are part of the UAPI.
But the rest of the batman-adv code can be touched to have a consistent
name again.
The bulk of the renaming was done using
sed -i -e 's/soft\(-\|\_\| \|\)i\([nf]\)/mesh\1i\2/g' \
-e 's/SOFT\(-\|\_\| \|\)I\([NF]\)/MESH\1I\2/g'
and then it was adjusted slightly when proofreading the changes.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Since batman-adv is not actually depending on hardware capabilities, it has
no limit on the MTU. Only the lower hard interfaces can limit it. In case
these have an high enough MTU or fragmentation is enabled, a higher MTU
than 1500 can be enabled.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Add a device tracker to struct batadv_hard_iface to help
debugging of network device refcount imbalances.
Signed-off-by: Eric Dumazet <edumazet@google.com>
[sven@narfation.org: fix kernel-doc, adopt for softif reference]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
The support for the batman-adv ring buffer for debug logs was dropped with
the removal of the debugfs filesystem. The structure storing this ring
buffer is therefore no longer needed since commit aff6f5a68b
("batman-adv: Drop deprecated debugfs support")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
This version will contain all the (major or even only minor) changes for
Linux 6.15.
The version number isn't a semantic version number with major and minor
information. It is just encoding the year of the expected publishing as
Linux -rc1 and the number of published versions this year (starting at 0).
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
There are 4 net namespaces involved when creating links:
- source netns - where the netlink socket resides,
- target netns - where to put the device being created,
- link netns - netns associated with the device (backend),
- peer netns - netns of peer device.
Currently, two nets are passed to newlink() callback - "src_net"
parameter and "dev_net" (implicitly in net_device). They are set as
follows, depending on netlink attributes in the request.
+------------+-------------------+---------+---------+
| peer netns | IFLA_LINK_NETNSID | src_net | dev_net |
+------------+-------------------+---------+---------+
| | absent | source | target |
| absent +-------------------+---------+---------+
| | present | link | link |
+------------+-------------------+---------+---------+
| | absent | peer | target |
| present +-------------------+---------+---------+
| | present | peer | link |
+------------+-------------------+---------+---------+
When IFLA_LINK_NETNSID is present, the device is created in link netns
first and then moved to target netns. This has some side effects,
including extra ifindex allocation, ifname validation and link events.
These could be avoided if we create it in target netns from
the beginning.
On the other hand, the meaning of src_net parameter is ambiguous. It
varies depending on how parameters are passed. It is the effective
link (or peer netns) by design, but some drivers ignore it and use
dev_net instead.
To provide more netns context for drivers, this patch packs existing
newlink() parameters, along with the source netns, link netns and peer
netns, into a struct. The old "src_net" is renamed to "net" to avoid
confusion with real source netns, and will be deprecated later. The use
of src_net are converted to params->net trivially.
Signed-off-by: Xiao Liang <shaw.leon@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250219125039.18024-3-shaw.leon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Simon Wunderlich says:
====================
Here are some batman-adv bugfixes:
- Fix panic during interface removal in BATMAN V, by Andy Strohman
- Cleanup BATMAN V/ELP metric handling, by Sven Eckelmann (2 patches)
- Fix incorrect offset in batadv_tt_tvlv_ogm_handler_v1(),
by Remi Pommarel
* tag 'batadv-net-pullrequest-20250207' of git://git.open-mesh.org/linux-merge:
batman-adv: Fix incorrect offset in batadv_tt_tvlv_ogm_handler_v1()
batman-adv: Drop unmanaged ELP metric worker
batman-adv: Ignore neighbor throughput metrics in error case
batman-adv: fix panic during interface removal
====================
Link: https://patch.msgid.link/20250207095823.26043-1-sw@simonwunderlich.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
An OGMv1 and OGMv2 packet receive processing were not only limited by the
number of bytes in the received packet but also by the nodes maximum
aggregation packet size limit. But this limit is relevant for TX and not
for RX. It must not be enforced by batadv_(i)v_ogm_aggr_packet to avoid
loss of information in case of a different limit for sender and receiver.
This has a minor side effect for B.A.T.M.A.N. IV because the
batadv_iv_ogm_aggr_packet is also used for the preprocessing for the TX.
But since the aggregation code itself will not allow more than
BATADV_MAX_AGGREGATION_BYTES bytes, this check was never triggering (in
this context) prior of removing it.
Cc: stable@vger.kernel.org
Fixes: c6c8fea297 ("net: Add batman-adv meshing protocol")
Fixes: 9323158ef9 ("batman-adv: OGMv2 - implement originators logic")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Since commit 4436df4788 ("batman-adv: Add flex array to struct
batadv_tvlv_tt_data"), the introduction of batadv_tvlv_tt_data's flex
array member in batadv_tt_tvlv_ogm_handler_v1() put tt_changes at
invalid offset. Those TT changes are supposed to be filled from the end
of batadv_tvlv_tt_data structure (including vlan_data flexible array),
but only the flex array size is taken into account missing completely
the size of the fixed part of the structure itself.
Fix the tt_change offset computation by using struct_size() instead of
flex_array_size() so both flex array member and its container structure
sizes are taken into account.
Cc: stable@vger.kernel.org
Fixes: 4436df4788 ("batman-adv: Add flex array to struct batadv_tvlv_tt_data")
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
The ELP worker needs to calculate new metric values for all neighbors
"reachable" over an interface. Some of the used metric sources require
locks which might need to sleep. This sleep is incompatible with the RCU
list iterator used for the recorded neighbors. The initial approach to work
around of this problem was to queue another work item per neighbor and then
run this in a new context.
Even when this solved the RCU vs might_sleep() conflict, it has a major
problems: Nothing was stopping the work item in case it is not needed
anymore - for example because one of the related interfaces was removed or
the batman-adv module was unloaded - resulting in potential invalid memory
accesses.
Directly canceling the metric worker also has various problems:
* cancel_work_sync for a to-be-deactivated interface is called with
rtnl_lock held. But the code in the ELP metric worker also tries to use
rtnl_lock() - which will never return in this case. This also means that
cancel_work_sync would never return because it is waiting for the worker
to finish.
* iterating over the neighbor list for the to-be-deactivated interface is
currently done using the RCU specific methods. Which means that it is
possible to miss items when iterating over it without the associated
spinlock - a behaviour which is acceptable for a periodic metric check
but not for a cleanup routine (which must "stop" all still running
workers)
The better approch is to get rid of the per interface neighbor metric
worker and handle everything in the interface worker. The original problems
are solved by:
* creating a list of neighbors which require new metric information inside
the RCU protected context, gathering the metric according to the new list
outside the RCU protected context
* only use rcu_trylock inside metric gathering code to avoid a deadlock
when the cancel_delayed_work_sync is called in the interface removal code
(which is called with the rtnl_lock held)
Cc: stable@vger.kernel.org
Fixes: c833484e5f ("batman-adv: ELP - compute the metric based on the estimated throughput")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
If a temporary error happened in the evaluation of the neighbor throughput
information, then the invalid throughput result should not be stored in the
throughtput EWMA.
Cc: stable@vger.kernel.org
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Reference counting is used to ensure that
batadv_hardif_neigh_node and batadv_hard_iface
are not freed before/during
batadv_v_elp_throughput_metric_update work is
finished.
But there isn't a guarantee that the hard if will
remain associated with a soft interface up until
the work is finished.
This fixes a crash triggered by reboot that looks
like this:
Call trace:
batadv_v_mesh_free+0xd0/0x4dc [batman_adv]
batadv_v_elp_throughput_metric_update+0x1c/0xa4
process_one_work+0x178/0x398
worker_thread+0x2e8/0x4d0
kthread+0xd8/0xdc
ret_from_fork+0x10/0x20
(the batadv_v_mesh_free call is misleading,
and does not actually happen)
I was able to make the issue happen more reliably
by changing hardif_neigh->bat_v.metric_work work
to be delayed work. This allowed me to track down
and confirm the fix.
Cc: stable@vger.kernel.org
Fixes: c833484e5f ("batman-adv: ELP - compute the metric based on the estimated throughput")
Signed-off-by: Andy Strohman <andrew@andrewstrohman.com>
[sven@narfation.org: prevent entering batadv_v_elp_get_throughput without
soft_iface]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Simon Wunderlich says:
====================
This cleanup patchset includes the following patches:
- bump version strings, by Simon Wunderlich
- Reorder includes for distributed-arp-table.c, by Sven Eckelmann
- Fix translation table change handling, by Remi Pommarel (2 patches)
- Map VID 0 to untagged TT VLAN, by Sven Eckelmann
- Update MAINTAINERS/mailmap e-mail addresses, by the respective authors
(4 patches)
- netlink: reduce duplicate code by returning interfaces,
by Linus Lüssing
* tag 'batadv-next-pullrequest-20250117' of git://git.open-mesh.org/linux-merge:
batman-adv: netlink: reduce duplicate code by returning interfaces
MAINTAINERS: mailmap: add entries for Antonio Quartulli
mailmap: add entries for Sven Eckelmann
mailmap: add entries for Simon Wunderlich
MAINTAINERS: update email address of Marek Linder
batman-adv: Map VID 0 to untagged TT VLAN
batman-adv: Don't keep redundant TT change events
batman-adv: Remove atomic usage for tt.local_changes
batman-adv: Reorder includes for distributed-arp-table.c
batman-adv: Start new development cycle
====================
Link: https://patch.msgid.link/20250117123910.219278-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reduce duplicate code by using netlink helpers which return the
soft/hard interface directly. Instead of returning an interface index
which we are typically not interested in.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
