Pull ceph fixes from Ilya Dryomov:
"An important patch from Hristo that squashes a folio reference leak
that could lead to OOM kills in CephFS and a number of miscellaneous
fixes from Raphael and Slava.
All but two are marked for stable"
* tag 'ceph-for-7.1-rc4' of https://github.com/ceph/ceph-client:
libceph: Fix potential null-ptr-deref in decode_choose_args()
libceph: handle rbtree insertion error in decode_choose_args()
libceph: Fix potential out-of-bounds access in osdmap_decode()
ceph: put folios not suitable for writeback
ceph: add ceph_has_realms_with_quotas() check to ceph_quota_update_statfs()
libceph: Fix potential out-of-bounds access in __ceph_x_decrypt()
ceph: fix BUG_ON in __ceph_build_xattrs_blob() due to stale blob size
ceph: fix a buffer leak in __ceph_setxattr()
libceph: Fix unnecessarily high ceph_decode_need() for uniform bucket
libceph: Fix potential out-of-bounds access in crush_decode()
Pull nfsd fixes from Chuck Lever:
"Fixes for this release:
- Correctness fix for the new sunrpc cache netlink protocol
Marked for stable:
- Correctness fixes for delegated attributes
- Prevent an infinite loop when revoking layouts"
* tag 'nfsd-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
NFSD: Fix infinite loop in layout state revocation
sunrpc: start cache request seqno at 1 to fix netlink GET_REQS
nfsd: update mtime/ctime on COPY in presence of delegated attributes
nfsd: update mtime/ctime on CLONE in presense of delegated attributes
nfsd: fix file change detection in CB_GETATTR
nfsd: fix GET_DIR_DELEGATION when VFS leases are disabled
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter.
Previous releases - regressions:
- ethtool: fix NULL pointer dereference in phy_reply_size
- netfilter:
- allocate hook ops while under mutex
- close dangling table module init race
- restore nf_conntrack helper propagation via expectation
- tcp:
- fix potential UAF in reqsk_timer_handler().
- fix out-of-bounds access for twsk in tcp_ao_established_key().
- vsock: fix empty payload in tap skb for non-linear buffers
- hsr: fix NULL pointer dereference in hsr_get_node_data()
- eth:
- cortina: fix RX drop accounting
- ice: fix locking in ice_dcb_rebuild()
Previous releases - always broken:
- napi: avoid gro timer misfiring at end of busypoll
- sched:
- dualpi2: initialize timer earlier in dualpi2_init()
- sch_cbs: Call qdisc_reset for child qdisc
- shaper:
- fix ordering issue in net_shaper_commit()
- reject handle IDs exceeding internal bit-width
- ipv6: flowlabel: enforce per-netns limit for unprivileged callers
- tls: fix off-by-one in sg_chain entry count for wrapped sk_msg ring
- smc: avoid NULL deref of conn->lnk in smc_msg_event tracepoint
- sctp: revalidate list cursor after sctp_sendmsg_to_asoc() in SCTP_SENDALL
- batman-adv:
- reject new tp_meter sessions during teardown
- purge non-released claims
- eth:
- i40e: cleanup PTP registration on probe failure
- idpf: fix double free and use-after-free in aux device error paths
- ena: fix potential use-after-free in get_timestamp"
* tag 'net-7.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (88 commits)
net: phy: DP83TC811: add reading of abilities
net: tls: prevent chain-after-chain in plain text SG
net: tls: fix off-by-one in sg_chain entry count for wrapped sk_msg ring
net/smc: reject CHID-0 ACCEPT that matches an empty ism_dev slot
macsec: use rcu_work to defer TX SA crypto cleanup out of softirq
macsec: use rcu_work to defer RX SA crypto cleanup out of softirq
macsec: introduce dedicated workqueue for SA crypto cleanup
net: net_failover: Fix the deadlock in slave register
MAINTAINERS: update atlantic driver maintainer
selftests/tc-testing: Add QFQ/CBS qlen underflow test
net/sched: sch_cbs: Call qdisc_reset for child qdisc
FDDI: defza: Sanitise the reset safety timer
net: ethernet: ravb: Do not check URAM suspension when WoL is active
ethtool: fix ethnl_bitmap32_not_zero() bit interval semantics
net/smc: avoid NULL deref of conn->lnk in smc_msg_event tracepoint
net/smc: fix sleep-inside-lock in __smc_setsockopt() causing local DoS
net: atm: fix skb leak in sigd_send() default branch
net: ethtool: phy: avoid NULL deref when PHY driver is unbound
net: atlantic: preserve PCI wake-from-D3 on shutdown when WOL enabled
net: shaper: reject QUEUE scope handle with missing id
...
Sashiko points out that if end = 0 (start != 0) the current
code will create a chain link to content type right after
the wrap link:
This would create a chain where the wrap link points directly
to another chain link. The scatterlist API sg_next iterator
does not recursively resolve consecutive chain links.
meaning this is illegal input to crypto.
The wrapping link is unnecessary if end = 0. end is the entry after
the last one used so end = 0 means there's nothing pushed after
the wrap:
end start i
v v v
[ ]...[ ][ d ][ d ][ d ][ d ][rsv for wrap]
Skip the wrapping in this case.
TLS 1.3 can use the "wrapping slot" for it's chaining if end = 0.
This avoids the chain-after-chain.
Move the wrap chaining before marking END and chaining off content
type, that feels like more logical ordering to me, but should not
matter from functional perspective.
Reported-by: Sashiko <sashiko-bot@kernel.org>
Fixes: 9aaaa56845 ("bpf: Sockmap/tls, skmsg can have wrapped skmsg that needs extra chaining")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20260511174920.433155-3-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When an sk_msg scatterlist ring wraps (sg.end < sg.start),
tls_push_record() chains the tail portion of the ring to the head
using sg_chain(). An extra entry in the sg array is reserved for
this:
struct sk_msg_sg {
[...]
/* The extra two elements:
* 1) used for chaining the front and sections when the list becomes
* partitioned (e.g. end < start). The crypto APIs require the
* chaining;
* 2) to chain tailer SG entries after the message.
*/
struct scatterlist data[MAX_MSG_FRAGS + 2];
The current code uses MAX_SKB_FRAGS + 1 as the ring size:
sg_chain(&msg_pl->sg.data[msg_pl->sg.start],
MAX_SKB_FRAGS - msg_pl->sg.start + 1,
msg_pl->sg.data);
This places the chain pointer at
sg_chain(data[start], (MAX_SKB_FRAGS - msg_start + 1) .. =
&data[start] + (MAX_SKB_FRAGS - msg_start + 1) - 1 =
data[start + (MAX_SKB_FRAGS - start + 1) - 1] =
data[MAX_SKB_FRAGS]
instead of the true last entry. This is likely due to a "race" of
the commit under Fixes landing close to
commit 031097d9e0 ("bpf: sk_msg, zap ingress queue on psock down")
Convert to ARRAY_SIZE and drop the data[start] / - start (as suggested
by Sabrina).
Reported-by: 钱一铭 <yimingqian591@gmail.com>
Fixes: 9aaaa56845 ("bpf: Sockmap/tls, skmsg can have wrapped skmsg that needs extra chaining")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20260511174920.433155-2-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
On the SMC-D client, slot 0 of ini->ism_dev[]/ini->ism_chid[] is
reserved for an SMC-Dv1 device. smc_find_ism_v2_device_clnt()
populates V2 entries starting at index 1, so when no V1 device is
selected slot 0 is left in its kzalloc()'ed state with ism_dev[0] ==
NULL and ism_chid[0] == 0.
smc_v2_determine_accepted_chid() then matches the peer's CHID against
the array starting from index 0 using the CHID alone. A malicious
peer replying to a SMC-Dv2-only proposal with d1.chid == 0 matches
the empty slot, ini->ism_selected becomes 0, and the subsequent
ism_dev[0]->lgr_lock dereference in smc_conn_create() faults at
offsetof(struct smcd_dev, lgr_lock) == 0x68:
BUG: KASAN: null-ptr-deref in _raw_spin_lock_bh+0x79/0xe0
Write of size 4 at addr 0000000000000068 by task exploit/144
Call Trace:
_raw_spin_lock_bh
smc_conn_create (net/smc/smc_core.c:1997)
__smc_connect (net/smc/af_smc.c:1447)
smc_connect (net/smc/af_smc.c:1720)
__sys_connect
__x64_sys_connect
do_syscall_64
Require ism_dev[i] to be non-NULL before accepting a CHID match.
Fixes: a7c9c5f4af ("net/smc: CLC accept / confirm V2")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Link: https://patch.msgid.link/20260511062138.2839584-1-xmei5@asu.edu
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There is netdev_lock_ops() before the NETDEV_REGISTER notifier
in register_netdevice(), so use the non-locking functions
in net_failover_slave_register().
failover_slave_register() in failover_existing_slave_register() adds lock
and unlock ops too.
Call Trace:
<TASK>
__schedule+0x30d/0x7a0
schedule+0x27/0x90
schedule_preempt_disabled+0x15/0x30
__mutex_lock.constprop.0+0x538/0x9e0
__mutex_lock_slowpath+0x13/0x20
mutex_lock+0x3b/0x50
dev_set_mtu+0x40/0xe0
net_failover_slave_register+0x24/0x280
failover_slave_register+0x103/0x1b0
failover_event+0x15e/0x210
? dropmon_net_event+0xac/0xe0
notifier_call_chain+0x5e/0xe0
raw_notifier_call_chain+0x16/0x30
call_netdevice_notifiers_info+0x52/0xa0
register_netdevice+0x5f4/0x7c0
register_netdev+0x1e/0x40
_mlx5e_probe+0xe2/0x370 [mlx5_core]
mlx5e_probe+0x59/0x70 [mlx5_core]
? __pfx_mlx5e_probe+0x10/0x10 [mlx5_core]
Fixes: 4c975fd700 ("net: hold instance lock during NETDEV_REGISTER/UP")
Signed-off-by: Faicker Mo <faicker.mo@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During a reset, CBS is not calling reset on its child qdisc, which
might cause qlen/backlog accounting issues. For example, if we have CBS
with a QFQ parent and a netem child with delay, we can create a scenario
where the parent's qlen underflows. QFQ, specifically, uses qlen to
check whether it should deference a pointer, so this scenario may cause
a null-ptr deref in QFQ:
[ 43.875639][ T319] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000009: 0000 [#1] SMP KASAN NOPTI
[ 43.876124][ T319] KASAN: null-ptr-deref in range [0x0000000000000048-0x000000000000004f]
[ 43.876417][ T319] CPU: 10 UID: 0 PID: 319 Comm: ping Not tainted 7.0.0-13039-ge728258debd5 #773 PREEMPT(full)
[ 43.876751][ T319] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 43.876949][ T319] RIP: 0010:qfq_dequeue+0x35c/0x1650
[ 43.877123][ T319] Code: 00 fc ff df 80 3c 02 00 0f 85 17 0e 00 00 4c 8d 73 48 48 89 9d b8 02 00 00 48 b8 00 00 00 00 00 fc ff df 4c 89 f2 48 c1 ea 03 <80> 3c 02 00 0f 85 76 0c 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b
[ 43.877648][ T319] RSP: 0018:ffff8881017ef4f0 EFLAGS: 00010216
[ 43.877845][ T319] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: dffffc0000000000
[ 43.878073][ T319] RDX: 0000000000000009 RSI: 0000000c40000000 RDI: ffff88810eef02b0
[ 43.878306][ T319] RBP: ffff88810eef0000 R08: ffff88810eef0280 R09: 1ffff1102120fd63
[ 43.878523][ T319] R10: 1ffff1102120fd66 R11: 1ffff1102120fd67 R12: 0000000c40000000
[ 43.878742][ T319] R13: ffff88810eef02b8 R14: 0000000000000048 R15: 0000000020000000
[ 43.878959][ T319] FS: 00007f9c51c47c40(0000) GS:ffff88817a0be000(0000) knlGS:0000000000000000
[ 43.879214][ T319] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 43.879403][ T319] CR2: 000055e69a2230a8 CR3: 000000010c07a000 CR4: 0000000000750ef0
[ 43.879621][ T319] PKRU: 55555554
[ 43.879735][ T319] Call Trace:
[ 43.879844][ T319] <TASK>
[ 43.879924][ T319] __qdisc_run+0x169/0x1900
[ 43.880075][ T319] ? dev_qdisc_enqueue+0x8b/0x210
[ 43.880222][ T319] __dev_queue_xmit+0x2346/0x37a0
[ 43.880376][ T319] ? register_lock_class+0x3f/0x800
[ 43.880531][ T319] ? srso_alias_return_thunk+0x5/0xfbef5
[ 43.880684][ T319] ? __pfx___dev_queue_xmit+0x10/0x10
[ 43.880834][ T319] ? srso_alias_return_thunk+0x5/0xfbef5
[ 43.880977][ T319] ? __lock_acquire+0x819/0x1df0
[ 43.881124][ T319] ? srso_alias_return_thunk+0x5/0xfbef5
[ 43.881275][ T319] ? srso_alias_return_thunk+0x5/0xfbef5
[ 43.881418][ T319] ? __asan_memcpy+0x3c/0x60
[ 43.881563][ T319] ? srso_alias_return_thunk+0x5/0xfbef5
[ 43.881708][ T319] ? eth_header+0x165/0x1a0
[ 43.881853][ T319] ? lockdep_hardirqs_on_prepare+0xdb/0x1a0
[ 43.882031][ T319] ? srso_alias_return_thunk+0x5/0xfbef5
[ 43.882174][ T319] ? neigh_resolve_output+0x3cc/0x7e0
[ 43.882325][ T319] ? srso_alias_return_thunk+0x5/0xfbef5
[ 43.882471][ T319] ip_finish_output2+0x6b6/0x1e10
Fix this by calling qdisc_reset for CBS' child qdisc.
Sashiko caught an issue which could result in a null ptr deref if
qdisc_create_dflt() is invoked on an unitialised cbs qdisc which is exposed
by this patch. We add an early return if the qdisc is null to address this.
This is a similar approach used by two other fixes[1][2].
The proper fix for this specific issue elucidated by sashiko is to remove
the call to qdisc_reset when qdisc_create_dflt fails. Since the dflt qdisc
isn't attached anywhere yet at that point, calling the reset callback doesn't
make much sense (and as stated has been a source of two other bugs).
We plan on submitting this fix in a later patch.
[1] https://lore.kernel.org/netdev/20221018063201.306474-2-shaozhengchao@huawei.com/
[2] https://lore.kernel.org/netdev/20221018063201.306474-4-shaozhengchao@huawei.com/
Fixes: 585d763af0 ("net/sched: Introduce Credit Based Shaper (CBS) qdisc")
Reported-by: Junyoung Jang <graypanda.inzag@gmail.com>
Tested-by: Junyoung Jang <graypanda.inzag@gmail.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ethnl_bitmap32_not_zero() should return true if some bit in [start, end)
is set:
- Fix inverted memchr_inv() sense: return true when the scan finds a
non-zero byte, not when the middle words are all zero.
- Return false for an empty interval (end <= start).
- When end is 32-bit aligned, indices in [start, end) do not include any
bits from map[end_word]; return false after earlier checks found no
non-zero data.
Fixes: 10b518d4e6 ("ethtool: netlink bitset handling")
Signed-off-by: Chenguang Zhao <zhaochenguang@kylinos.cn>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The smc_msg_event tracepoint class, shared by smc_tx_sendmsg and
smc_rx_recvmsg, unconditionally dereferences smc->conn.lnk:
__string(name, smc->conn.lnk->ibname)
conn->lnk is only set for SMC-R; for SMC-D it is NULL. Other code on
these paths already handles this (e.g. !conn->lnk in
SMC_STAT_RMB_TX_SIZE_SMALL()). With the tracepoint enabled, the first
sendmsg()/recvmsg() on an SMC-D socket crashes:
Oops: general protection fault, probably for non-canonical address
KASAN: null-ptr-deref in range [...]
RIP: 0010:strlen+0x1e/0xa0
Call Trace:
trace_event_raw_event_smc_msg_event (net/smc/smc_tracepoint.h:44)
smc_rx_recvmsg (net/smc/smc_rx.c:515)
smc_recvmsg (net/smc/af_smc.c:2859)
__sys_recvfrom (net/socket.c:2315)
__x64_sys_recvfrom (net/socket.c:2326)
do_syscall_64
The faulting address 0x3e0 is offsetof(struct smc_link, ibname),
confirming the NULL ->lnk deref. Enabling the tracepoint requires
root, but the trigger itself is unprivileged: socket(AF_SMC, ...) has
no capability check, and SMC-D negotiation needs no admin step on
s390 or on x86 with the loopback ISM device loaded.
Log an empty device name for SMC-D instead of dereferencing NULL.
Fixes: aff3083f10 ("net/smc: Introduce tracepoints for tx and rx msg")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Reviewed-by: Sidraya Jayagond <sidraya@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A logic flaw in __smc_setsockopt() allows a local unprivileged user to
cause a Denial of Service (DoS) by holding the socket lock indefinitely.
The function __smc_setsockopt() calls copy_from_sockptr() while holding
lock_sock(sk). By passing a userfaultfd-monitored memory page (or
FUSE-backed memory on systems where unprivileged userfaultfd is disabled)
as the optval, an attacker can halt execution during the copy operation,
keeping the lock held.
Combined with asynchronous tear-down operations like shutdown(), this
exhausts the kernel wq (kworkers) and triggers the hung task watchdog.
[ 240.123456] INFO: task kworker/u8:2 blocked for more than 120 seconds.
[ 240.123489] Call Trace:
[ 240.123501] smc_shutdown+...
[ 240.123512] lock_sock_nested+...
This patch moves the user-space copy outside the lock_sock() critical
section to prevent the issue.
Fixes: a6a6fe27ba ("net/smc: Dynamic control handshake limitation by socket options")
Signed-off-by: Nicolò Coccia <n.coccia96@gmail.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Tested-by: Dust Li <dust.li@linux.alibaba.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
phydev->drv can become NULL while the phy_device is still attached to
its net_device, namely after the PHY driver is unbound via sysfs:
echo <mdio_id> > /sys/bus/mdio_bus/drivers/<phy_drv>/unbind
phy_remove() clears phydev->drv but doesn't call phy_detach(), so the
phy_device stays in the link topology xarray and ethnl_req_get_phydev()
still hands it back. ETHTOOL_MSG_PHY_GET then oopses on:
rep_data->drvname = kstrdup(phydev->drv->name, GFP_KERNEL);
drvname is already treated as optional by phy_reply_size(),
phy_fill_reply() and phy_cleanup_data(), so just skip the allocation
when there is no driver bound.
Fixes: 9dd2ad5e92 ("net: ethtool: phy: Convert the PHY_GET command to generic phy dump")
Cc: stable@vger.kernel.org # 6.13.x
Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260509215046.107157-1-devnexen@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A message of type CEPH_MSG_OSD_MAP contains an OSD map that itself
contains a CRUSH map. When decoding this CRUSH map in crush_decode(), an
array of max_buckets CRUSH buckets is decoded, where some indices may
not refer to actual buckets and are therefore set to NULL. The received
CRUSH map may optionally contain choose_args that get decoded in
decode_choose_args(). When decoding a crush_choose_arg_map, a series of
choose_args for different buckets is decoded, with the bucket_index
being read from the incoming message. It is only checked that the bucket
index does not exceed max_buckets, but not that it doesn't point to an
index with a NULL bucket. If a (potentially corrupted) message contains
a crush_choose_arg_map including such a bucket_index, a null pointer
dereference may occur in the subsequent processing when attempting to
access the bucket with the given index.
This patch fixes the issue by extending the affected check. Now, it is
only attempted to access the bucket if it is not NULL.
Cc: stable@vger.kernel.org
Signed-off-by: Raphael Zimmer <raphael.zimmer@tu-ilmenau.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
A message of type CEPH_MSG_OSD_MAP contains an OSD map that itself
contains a CRUSH map. The received CRUSH map may optionally contain
choose_args that get decoded in decode_choose_args(). In this function,
num_choose_arg_maps is read from the message, and a corresponding number
of crush_choose_arg_maps gets decoded afterwards. Each
crush_choose_arg_map has a choose_args_index, which serves as the key
when inserting it into the choose_args rbtree of the decoded crush_map.
If a (potentially corrupted) message contains two crush_choose_arg_maps
with the same index, the assertion in insert_choose_arg_map() triggers a
kernel BUG when trying to insert the second crush_choose_arg_map.
This patch fixes the issue by switching to the non-asserting rbtree
insertion function and rejecting the message if the insertion fails.
[ idryomov: changelog ]
Cc: stable@vger.kernel.org
Signed-off-by: Raphael Zimmer <raphael.zimmer@tu-ilmenau.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
net_shaper_parse_handle() does not enforce that the user provides
the handle ID. For NODE the ID defaults to UNSPEC for all other
cases it defaults to 0.
For NETDEV 0 is the only option. For QUEUE defaulting to 0 makes
less intuitive sense. Specifically because the behavior should
(IMHO) be the same for all cases where there may be more than
one ID (QUEUE and NODE).
We should either document this as intentional or reject.
I picked the latter with no strong conviction.
Fixes: 4b623f9f0f ("net-shapers: implement NL get operation")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20260510192904.3987113-11-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The NETDEV scope represents a singleton root shaper in the per-device
hierarchy. All code assumes NETDEV shapers have id 0:
net_shaper_default_parent() hardcodes parent->id = 0 when returning
the NETDEV parent for QUEUE/NODE children, and the UAPI documentation
describes NETDEV scope as "the main shaper" (singular, not plural).
Make sure we reject non-0 IDs.
Fixes: 4b623f9f0f ("net-shapers: implement NL get operation")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20260510192904.3987113-10-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
net_shaper_parse_handle() reads the user-supplied handle ID via
nla_get_u32(), accepting the full u32 range. However, the xarray key
is built by net_shaper_handle_to_index() using
FIELD_PREP(NET_SHAPER_ID_MASK, handle->id), where NET_SHAPER_ID_MASK
is GENMASK(25, 0) - only 26 bits wide. FIELD_PREP silently masks off
the upper bits at runtime. A user-supplied NODE id like 0x04000123
becomes id 0x123.
Additionally, a user-supplied id equal to NET_SHAPER_ID_UNSPEC
(0x03FFFFFF, which is NET_SHAPER_ID_MASK itself) would collide with
the sentinel used internally by the group operation to signal
"allocate a new NODE id".
Reject user-supplied IDs >= NET_SHAPER_ID_MASK (i.e., >= 0x03FFFFFF)
in the policy.
Fixes: 4b623f9f0f ("net-shapers: implement NL get operation")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20260510192904.3987113-9-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
net_shaper_group_send_reply() writes both the NET_SHAPER_A_IFINDEX
attribute (via net_shaper_fill_binding()) and the nested
NET_SHAPER_A_HANDLE attribute (via net_shaper_fill_handle()), but
the reply skb at the call site in net_shaper_nl_group_doit() is
allocated using net_shaper_handle_size(), which only accounts for
the nested handle.
The allocation is therefore short by nla_total_size(sizeof(u32))
(8 bytes) for the IFINDEX attribute. In practice the slab allocator
rounds up the small allocation so the bug is latent, but the size
accounting is wrong and could bite if the reply grew further.
Introduce net_shaper_group_reply_size() that accounts for the full
reply payload and use it both at the genlmsg_new() call site and in
the defensive WARN_ONCE message.
Fixes: 5d5d4700e7 ("net-shapers: implement NL group operation")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20260510192904.3987113-7-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
net_shaper_nl_group_doit() does not deduplicate NET_SHAPER_A_LEAVES
entries. When userspace supplies the same leaf handle twice, the same
old-parent pointer lands twice in old_nodes[]. The cleanup loop double
frees the parent. Of course the same parent may still be in old_nodes[]
twice if we are moving multiple of its leaves.
Note that this patch also implicitly fixes the fact that the
i >= leaves_count path forgets to set ret.
Fixes: 5d5d4700e7 ("net-shapers: implement NL group operation")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20260510192904.3987113-4-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The usual way of inserting entries which are not yet fully ready
into XArray is to have a VALID flag. The shaper code has a NOT_VALID
flag. Since XArray code does not let us create entries with marks
already set - the creation of entries is currently not atomic.
Flip the polarity of the VALID flag. This closes the tiny race
in net_shaper_pre_insert() of entries being created without
the NOT_VALID flag.
Fixes: 93954b40f6 ("net-shapers: implement NL set and delete operations")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20260510192904.3987113-2-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
For non-linear skbs, virtio_transport_build_skb() goes through
virtio_transport_copy_nonlinear_skb() to copy the original payload
in the new skb to be delivered to the vsockmon tap device.
This manually initializes an iov_iter but does not set iov_iter.count.
Since the iov_iter is zero-initialized, the copy length is zero and no
payload is actually copied to the monitor interface, leaving data
un-initialized.
Fix this by removing the linear vs non-linear split and using
skb_copy_datagram_iter() with iov_iter_kvec() for all cases, as
vhost-vsock already does. This handles both linear and non-linear skbs,
properly initializes the iov_iter, and removes the now unused
virtio_transport_copy_nonlinear_skb().
While touching this code, let's also check the return value of
skb_copy_datagram_iter(), even though it's unlikely to fail.
Fixes: 4b0bf10eb0 ("vsock/virtio: non-linear skb handling for tap")
Reported-by: Yiqi Sun <sunyiqixm@gmail.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Arseniy Krasnov <avkrasnov@rulkc.org>
Link: https://patch.msgid.link/20260508164411.261440-3-sgarzare@redhat.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
virtio_transport_build_skb() builds a new skb to be delivered to the
vsockmon tap device. To build the new skb, it uses the original skb
data length as payload length, but as the comment notes, the original
packet stored in the skb may have been split in multiple packets, so we
need to use the length in the header, which is correctly updated before
the packet is delivered to the tap, and the offset for the data.
This was also similar to what we did before commit 71dc9ec9ac
("virtio/vsock: replace virtio_vsock_pkt with sk_buff") where we probably
missed something during the skb conversion.
Also update the comment above, which was left stale by the skb
conversion and still mentioned a buffer pointer that no longer exists.
Fixes: 71dc9ec9ac ("virtio/vsock: replace virtio_vsock_pkt with sk_buff")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Arseniy Krasnov <avkrasnov@rulkc.org>
Link: https://patch.msgid.link/20260508164411.261440-2-sgarzare@redhat.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In the HSR (High-availability Seamless Redundancy) protocol, node
information is maintained in the node_db. When a supervision frame is
received, node->addr_B_port is updated to track the receiving port type
(e.g., HSR_PT_SLAVE_B).
If the underlying physical interface associated with this slave port is
removed (e.g., via `ip link del`), hsr_del_port() frees the hsr_port
object. However, the stale node->addr_B_port reference is kept in the
node_db until the node ages out.
Subsequently, if userspace queries the node status via the Netlink
command HSR_C_GET_NODE_STATUS, the kernel calls hsr_get_node_data().
This function unconditionally dereferences the pointer returned by
hsr_port_get_hsr():
if (node->addr_B_port != HSR_PT_NONE) {
port = hsr_port_get_hsr(hsr, node->addr_B_port);
*addr_b_ifindex = port->dev->ifindex; // <-- NULL deref
}
If the slave port has been deleted, hsr_port_get_hsr() returns NULL,
resulting in a kernel panic.
Oops: general protection fault, probably for non-canonical address
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
RIP: 0010:hsr_get_node_data+0x7b6/0x9e0
Call Trace:
<TASK>
hsr_get_node_status+0x445/0xa40
Fix this by adding a proper NULL pointer check. If the port lookup fails
due to a stale port type, gracefully treat it as if no valid port exists
and assign -1 to the interface index.
Steps to reproduce:
1. Create an HSR interface with two slave devices.
2. Receive a supervision frame to populate node_db with
addr_B_port assigned to SLAVE_B.
3. Delete the underlying slave device B.
4. Send an HSR_C_GET_NODE_STATUS Netlink message.
Fixes: c5a7591172 ("net/hsr: Use list_head (and rcu) instead of array for slave devices.")
Signed-off-by: Quan Sun <2022090917019@std.uestc.edu.cn>
Link: https://patch.msgid.link/20260508124636.1462346-1-2022090917019@std.uestc.edu.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
lockdep_sock_is_held() was added in tcp_ao_established_key()
by the cited commit.
It can be called from tcp_v[46]_timewait_ack() with twsk.
Since it does not have sk->sk_lock, the lockdep annotation
results in out-of-bound access.
$ pahole -C tcp_timewait_sock vmlinux | grep size
/* size: 288, cachelines: 5, members: 8 */
$ pahole -C sock vmlinux | grep sk_lock
socket_lock_t sk_lock; /* 440 192 */
Let's not use lockdep_sock_is_held() for TCP_TIME_WAIT.
Fixes: 6b2d11e2d8 ("net/tcp: Add missing lockdep annotations for TCP-AO hlist traversals")
Reported-by: Damiano Melotti <melotti@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260508120853.4098365-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When iov_iter_get_pages2() fails in rds_message_zcopy_from_user(),
the pinned pages are released with put_page(), and
rm->data.op_mmp_znotifier is cleared. But we fail to properly
clear rm->data.op_nents.
Later when rds_message_purge() is called from rds_sendmsg() the
cleanup loop iterates over the incorrectly non zero number of
op_nents and frees them again.
Fix this by properly resetting op_nents when it should be in
rds_message_zcopy_from_user().
Fixes: 0cebaccef3 ("rds: zerocopy Tx support.")
Signed-off-by: Allison Henderson <achender@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260505234336.2132721-1-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When decoding osd_state and osd_weight from an incoming osdmap in
osdmap_decode(), both are decoded for each osd, i.e., map->max_osd
times. The ceph_decode_need() check only accounts for
sizeof(*map->osd_weight) once. This can potentially result in an
out-of-bounds memory access if the incoming message is corrupted such
that the max_osd value exceeds the actual content of the osdmap message.
This patch fixes the issue by changing the corresponding part in the
ceph_decode_need() check to account for
map->max_osd*sizeof(*map->osd_weight).
Cc: stable@vger.kernel.org
Fixes: dcbc919a5d ("libceph: switch osdmap decoding to use ceph_decode_entity_addr")
Signed-off-by: Raphael Zimmer <raphael.zimmer@tu-ilmenau.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
In __ceph_x_decrypt(), a part of the buffer p is interpreted as a
ceph_x_encrypt_header, and the magic field of this struct is accessed.
This happens without any guarantee that the buffer is large enough to
hold this struct. The function parameter ciphertext_len represents the
length of the ciphertext to decrypt and is guaranteed to be at most the
remaining size of the allocated buffer p. However, this value is not
necessarily greater than sizeof(ceph_x_encrypt_header). E.g., a message
frame of type FRAME_TAG_AUTH_REPLY_MORE, that is just as long to hold
the ciphertext at its end with a ciphertext_len of 8 or less, can
trigger an out-of-bounds memory access when accessing hdr->magic.
This patch fixes the issue by adding a check to ensure that the
decrypted plaintext in the buffer is large enough to represent at least
the ceph_x_encrypt_header.
Cc: stable@vger.kernel.org
Signed-off-by: Raphael Zimmer <raphael.zimmer@tu-ilmenau.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
In crush_decode_uniform_bucket(), the item_weight field of the bucket
is set. This is a single field of type u32 since the uniform bucket uses
the same weight for all items. The value in ceph_decode_need() is set to
(1+b->h.size) * sizeof(u32), which is higher than actually needed.
This patch removes the call to ceph_decode_need() with the unnecessarily
high value and switches the subsequent operation from ceph_decode_32()
to ceph_decode_32_safe(), which already includes the correct bounds
check.
Signed-off-by: Raphael Zimmer <raphael.zimmer@tu-ilmenau.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
A message of type CEPH_MSG_OSD_MAP containing a crush map with at least
one bucket has two fields holding the bucket algorithm. If the values
in these two fields differ, an out-of-bounds access can occur. This is
the case because the first algorithm field (alg) is used to allocate
the correct amount of memory for a bucket of this type, while the second
algorithm field inside the bucket (b->alg) is used in the subsequent
processing.
This patch fixes the issue by adding a check that compares alg and
b->alg and aborts the processing in case they differ. Furthermore,
b->alg is set to 0 in this case, because the destruction of the crush
map also uses this field to determine the bucket type, which can again
result in an out-of-bounds access when trying to free the memory pointed
to by the fields of the bucket. To correctly free the memory allocated
for the bucket in such a case, the corresponding call to kfree is moved
from the algorithm-specific crush_destroy_bucket functions to the
generic crush_destroy_bucket().
Cc: stable@vger.kernel.org
Signed-off-by: Raphael Zimmer <raphael.zimmer@tu-ilmenau.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Simon Wunderlich says:
====================
Here are some batman-adv bugfixes:
- fix integer overflow on buff_pos, by Lyes Bourennani
- fix invalid tp_meter access during teardown, by Jiexun Wang (2 patches)
- stop caching unowned originator pointers in BAT IV, by Jiexun Wang
- tp_meter: fix tp_num leak on kmalloc failure, by Sven Eckelmann
- fix BLA refcounting issues, by Sven Eckelmann (3 patches)
* tag 'batadv-net-pullrequest-20260508' of https://git.open-mesh.org/batadv:
batman-adv: bla: put backbone reference on failed claim hash insert
batman-adv: bla: only purge non-released claims
batman-adv: bla: prevent use-after-free when deleting claims
batman-adv: tp_meter: fix tp_num leak on kmalloc failure
batman-adv: stop caching unowned originator pointers in BAT IV
batman-adv: stop tp_meter sessions during mesh teardown
batman-adv: reject new tp_meter sessions during teardown
batman-adv: fix integer overflow on buff_pos
====================
Link: https://patch.msgid.link/20260508154314.12817-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sunrpc_cache_requests_snapshot() filters requests with
crq->seqno <= min_seqno. The min_seqno for the first netlink
dump call is cb->args[0] which is 0. Since next_seqno was
initialized to 0, the very first cache request got seqno=0
and was silently skipped by the snapshot (0 <= 0 is true).
This caused netlink-based GET_REQS to return 0 pending requests
even when a request was queued, preventing mountd from resolving
cache entries (particularly expkey/nfsd.fh). The unresolved
CACHE_PENDING state blocked all further notifications for the
entry, leading to permanent NFS4ERR_DELAY hangs.
Start next_seqno at 1 so all requests have seqno >= 1 and pass
the snapshot filter when min_seqno is 0.
Fixes: facc4e3c80 ("sunrpc: split cache_detail queue into request and reader lists")
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The DATA-packet handler in rxrpc_input_call_event() and the RESPONSE
handler in rxrpc_verify_response() copy the skb to a linear one before
calling into the security ops only when skb_cloned() is true. An skb
that is not cloned but still carries externally-owned paged fragments
(e.g. SKBFL_SHARED_FRAG set by splice() into a UDP socket via
__ip_append_data, or a chained skb_has_frag_list()) falls through to
the in-place decryption path, which binds the frag pages directly into
the AEAD/skcipher SGL via skb_to_sgvec().
Extend the gate to also unshare when skb_has_frag_list() or
skb_has_shared_frag() is true. This catches the splice-loopback vector
and other externally-shared frag sources while preserving the
zero-copy fast path for skbs whose frags are kernel-private (e.g. NIC
page_pool RX, GRO). The OOM/trace handling already in place is reused.
Fixes: d0d5c0cd1e ("rxrpc: Use skb_unshare() rather than skb_cow_data()")
Cc: stable@vger.kernel.org
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
XSKMAP entries are used as redirect targets for incoming XDP frames.
A TX-only AF_XDP socket lacks an Rx ring and cannot handle redirected
traffic, but xsk_map_update_elem() currently allows such sockets to
be inserted into the map.
Redirecting packets to such a socket on the veth generic-XDP path
causes a kernel crash in xsk_generic_rcv().
This became possible after xsk_is_setup_for_bpf_map() was removed from
the XSKMAP update path, which allowed bound TX-only sockets to be
inserted into the map.
Reject TX-only sockets during XSKMAP updates to avoid the crash.
They remain fully operational for pure Tx purposes outside XSKMAP.
Fixes: 968be23cea ("xsk: Fix possible segfault at xskmap entry insertion")
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Yifan Wu <yifanwucs@gmail.com>
Signed-off-by: Linpu Yu <linpu5433@gmail.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://lore.kernel.org/r/20260508144344.694-1-linpu5433@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following batch contains Netfilter fixes for net:
1) Allow initial x_tables table replacement without emitting an audit
log message. Delay the register message until after hooks are wired up
to avoid unnecessary unregister logs during error unwinding.
2) Fix a NULL dereference by allocating hook ops before adding the
table to the per-netns list. Use `synchronize_rcu()` during error
unwinding to ensure the table stops processing packets before
teardown. Defer audit log register message until all operations
succeed.
3) Refactor xtables to use a single `xt_unregister_table_pre_exit`
function. Eliminate code duplication by centralizing table
unregistration logic within the xtables core. ebtables cannot be
changed due to incompatibility.
4) Unregister xtables templates before module removal. This prevents
a race condition where userspace instantiates a new table after the
pernet unreg removed the current table.
5) Add `xtables_unregister_table_exit` to fully unregister netfilter
tables during module removal. Unlink the table from dying lists,
then free hook operations.
6) Implement a two-stage removal scheme for ebtables following the
x_tables pattern. Assign table->ops while holding the ebt mutex to
prevent exposing partially-filled structures.
7) Fix ebtables module initialization race. Register the template last
in table initialization functions. Prevent table instantiation before
pernet operations are available.
8) Fix a race condition in x_tables module initialization. Ensure
pernet ops are fully set up before exposing the table to userspace.
9) Fix a race condition in ebtables module initialization, similar to
previous patch.
10) Restore propagation of helper to expected connection, this is a
fix-for-recent-fix.
11) Validate that the expectation tuple and mask netlink attributes are
present when adding expectation via nfqueue, this fixes a possible
null-ptr-deref.
12) Fix possible rare memleak in the SIP helper in case helper has been
detached from conntrack entry, from Li Xiasong.
13) Fix refcount leak in nft_ct when creating custom expectation, also
from Li Xiason.
Patches 1-9 from Florian Westphal.
10) Restore propagation of helper to expected connection, this is a
fix-for-recent-fix.
11) Check that tuple and mask netlink attributes are set when creating an
expectation via nfqueue.
* tag 'nf-26-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_ct: fix missing expect put in obj eval
netfilter: nf_conntrack_sip: get helper before allocating expectation
netfilter: ctnetlink: check tuple and mask in expectations created via nfqueue
netfilter: nf_conntrack_expect: restore helper propagation via expectation
netfilter: bridge: eb_tables: close module init race
netfilter: x_tables: close dangling table module init race
netfilter: ebtables: close dangling table module init race
netfilter: ebtables: move to two-stage removal scheme
netfilter: x_tables: add and use xtables_unregister_table_exit
netfilter: x_tables: unregister the templates first
netfilter: x_tables: add and use xt_unregister_table_pre_exit
netfilter: x_tables: allocate hook ops while under mutex
netfilter: x_tables: allow initial table replace without emitting audit log message
====================
Link: https://patch.msgid.link/20260507234509.603182-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The SCTP_SENDALL path in sctp_sendmsg() iterates ep->asocs with
list_for_each_entry_safe(), which caches the next entry in @tmp before
the loop body runs. The body calls sctp_sendmsg_to_asoc(), which may
drop the socket lock inside sctp_wait_for_sndbuf().
While the lock is dropped, another thread can SCTP_SOCKOPT_PEELOFF the
association cached in @tmp, migrating it to a new endpoint via
sctp_sock_migrate() (list_del_init() + list_add_tail() to
newep->asocs), and optionally close the new socket which frees the
association via kfree_rcu(). The cached @tmp can also be freed by a
network ABORT for that association, processed in softirq while the
lock is dropped.
sctp_wait_for_sndbuf() revalidates @asoc (the current entry) on re-lock
via the "sk != asoc->base.sk" and "asoc->base.dead" checks, but nothing
revalidates @tmp. After a successful return, the iterator advances to
the stale @tmp, yielding either a use-after-free (if the peeled socket
was closed) or a list-walk onto the new endpoint's list head (type
confusion of &newep->asocs as a struct sctp_association *).
Both are reachable from CapEff=0; the type-confusion path gives
controlled indirect call via the outqueue.sched->init_sid pointer.
Fix by re-deriving @tmp from @asoc after sctp_sendmsg_to_asoc()
returns. @asoc is known to still be on ep->asocs at that point: the
only callers that list_del an association from ep->asocs are
sctp_association_free() (which sets asoc->base.dead) and
sctp_assoc_migrate() (which changes asoc->base.sk), and
sctp_wait_for_sndbuf() checks both under the lock before any
successful return; a tripped check propagates as err < 0 and the loop
bails before the re-derive.
The SCTP_ABORT path in sctp_sendmsg_check_sflags() returns 0 and the
loop hits 'continue' before sctp_sendmsg_to_asoc() is ever called, so
the @tmp cached by list_for_each_entry_safe() still covers the
lock-held free that ba59fb0273 ("sctp: walk the list of asoc
safely") was added for.
Fixes: 4910280503 ("sctp: add support for snd flag SCTP_SENDALL process in sendmsg")
Cc: stable@vger.kernel.org
Signed-off-by: Ben Morris <bmorris@anthropic.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20260508001455.3137-1-joycathacker@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When an existing node-scope shaper is moved to a different parent
via the group operation, the framework fails to update the leaves
count on both the old and new parent shapers. Only newly created
nodes (handle.id == NET_SHAPER_ID_UNSPEC) trigger the parent
leaves increment at line 1039.
This causes the parent's leaves counter to diverge from the
actual number of children in the xarray. When the node is later
deleted, pre_del_node() allocates an array sized by the stale
leaves count, but the xarray iteration finds more children than
expected, hitting the WARN_ON_ONCE guard and returning -EINVAL.
Rather than adding reparenting support with complex leaves count
bookkeeping, reject group calls that attempt to change an existing
node's parent. Updates to an existing node's rate or leaves under
the same parent remain permitted. We expect that for any modification
of the topology user should always create new groups and let the
kernel garbage collect the leaf-less nodes.
Fixes: 5d5d4700e7 ("net-shapers: implement NL group operation")
Signed-off-by: Mohsin Bashir <hmohsin@meta.com>
Link: https://patch.msgid.link/20260506233745.111895-1-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These methods generally consume ownership of the provided skb, so even
if an error path is encountered, the skb is freed. This is because the
very first thing they do after some initial setup is to unconditionally
consume the skb via consume_skb(skb). Any subsequent errors lead to the
core netlink layer freeing the skb.
However, there is one check that occurs before ownership is passed,
which is the check for the group index. So if this error condition is
encountered, then the skb is leaked. This error condition is generally
considered a violation of the netlink API, so it's not expected to occur
under normal circumstances. For the same reason, no callers check for
this error condition, and no callers need to be adjusted. However, we
should still follow the same ownership semantics of the rest of the
function. Thus, free the skb in this codepath.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Suggested-by: Matthew Maurer <mmaurer@google.com>
Fixes: 2a94fe48f3 ("genetlink: make multicast groups const, prevent abuse")
Link: https://lore.kernel.org/r/845b36ba-7b3a-41f2-acb2-b284f253e2ca@lunn.ch
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260506-genlmsg-return-v2-1-a63ee2a055d6@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In phy_prepare_data(), several strings such as 'name', 'drvname',
'upstream_sfp_name', and 'downstream_sfp_name' are allocated using
kstrdup(). However, these allocations were not checked for failure.
If kstrdup() fails for 'name', it returns NULL while the function
continues. This leads to a kernel NULL pointer dereference and panic
later in phy_reply_size() when it unconditionally calls strlen() on
the NULL pointer.
While other strings like 'upstream_sfp_name' might be checked before
access in certain code paths, failing to handle these allocations
consistently can lead to incomplete data reporting or hidden bugs.
Fix this by adding proper NULL checks for all kstrdup() calls in
phy_prepare_data() and implement a centralized error handling path
using goto labels to ensure all previously allocated resources are
freed on failure.
Fixes: 9dd2ad5e92 ("net: ethtool: phy: Convert the PHY_GET command to generic phy dump")
Signed-off-by: Quan Sun <2022090917019@std.uestc.edu.cn>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260507131738.1173835-1-2022090917019@std.uestc.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When in irq deferral mode (defer-hard-irqs > 0), a short enough
gro-flush timeout can trigger before NAPI_STATE_SCHED is cleared if the
last poll in busy_poll_stop() takes too long. This can have the effect
of leaving the queue stuck with interrupts disabled and no timer armed
which results in a tx timeout if there is no subsequent busypoll cycle.
To prevent this, defer the gro-flush timer arm after the last poll.
Fixes: 7fd3253a7d ("net: Introduce preferred busy-polling")
Co-developed-by: Martin Karsten <mkarsten@uwaterloo.ca>
Signed-off-by: Martin Karsten <mkarsten@uwaterloo.ca>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260506090808.820559-2-dtatulea@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
fl_size, fl_ht and ip6_fl_lock in net/ipv6/ip6_flowlabel.c are
file scope and shared across netns. mem_check() reads fl_size to
decide whether to deny non-CAP_NET_ADMIN callers. capable() runs
against init_user_ns, so an unprivileged user in any non-init
userns can push fl_size past FL_MAX_SIZE - FL_MAX_SIZE / 4 and
starve every other unprivileged userns on the host.
Add struct netns_ipv6::flowlabel_count, bumped and decremented
next to fl_size in fl_intern, ip6_fl_gc and ip6_fl_purge. The new
field fills the existing 4-byte hole after ipmr_seq, so struct
netns_ipv6 stays the same size on 64-bit builds.
Bump FL_MAX_SIZE from 4096 to 8192. It has been 4096 since the
file was added. Machines and connection counts have grown.
mem_check() folds an extra per-netns ceiling into the existing
non-CAP_NET_ADMIN conditional. The ceiling is half of the total
budget that unprivileged callers have ever been able to use, i.e.
(FL_MAX_SIZE - FL_MAX_SIZE / 4) / 2 = 3072 entries. With
FL_MAX_SIZE doubled, this preserves the original per-user reach
of 3K (what an unprivileged caller could already obtain before
this change), while forcing an attacker to spread allocations
across at least two netns to exhaust the global non-CAP_NET_ADMIN
budget.
CAP_NET_ADMIN against init_user_ns still bypasses both caps.
The previous patch took ip6_fl_lock across mem_check and
fl_intern, so the new flowlabel_count read in mem_check and the
new flowlabel_count++ in fl_intern run under the same critical
section. flowlabel_count is therefore plain int, like fl_size.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Suggested-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Cc: stable@vger.kernel.org # v5.15+
Signed-off-by: Maoyi Xie <maoyi.xie@ntu.edu.sg>
Link: https://patch.msgid.link/20260506082416.2259567-3-maoyixie.tju@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mem_check() in net/ipv6/ip6_flowlabel.c reads fl_size without
holding ip6_fl_lock. fl_intern() takes the lock immediately
afterwards. The two checks therefore race against concurrent
fl_intern, ip6_fl_gc and ip6_fl_purge writers, which makes the
mem_check budget check approximate.
Move spin_lock_bh(&ip6_fl_lock) and the matching unlock from
fl_intern() into its only caller ipv6_flowlabel_get(). The
mem_check() call now runs under the same critical section as the
fl_intern() insert, so the budget check is exact.
With all writers and the read of fl_size under ip6_fl_lock,
convert fl_size from atomic_t to plain int. The four sites that
update or read fl_size are fl_intern (insert path), ip6_fl_gc
(garbage collector, the !sched check and the per-entry decrement),
ip6_fl_purge (per-netns purge), and mem_check (budget check), and
all four now run under ip6_fl_lock.
This is a prerequisite for adding a per-netns budget alongside
fl_size. The follow-up patch adds netns_ipv6::flowlabel_count and
folds it into mem_check().
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Suggested-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Maoyi Xie <maoyi.xie@ntu.edu.sg>
Link: https://patch.msgid.link/20260506082416.2259567-2-maoyixie.tju@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When TCP socket migration happens in reqsk_timer_handler(),
@sk_listener will be updated with the new listener.
When we call __inet_csk_reqsk_queue_drop(), the listener must
be the one stored in req->rsk_listener.
The cited commit accidentally replaced oreq->rsk_listener with
sk_listener, leading to imbalanced icsk_accept_queue count.
Let's pass the correct listener to __inet_csk_reqsk_queue_drop().
Fixes: e8c526f2bd ("tcp/dccp: Don't use timer_pending() in reqsk_queue_unlink().")
Reported-by: Damiano Melotti <melotti@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260506035954.1563147-3-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When TCP socket migration fails at inet_ehash_insert() in
reqsk_timer_handler(), we jump to the no_ownership: label
and free the new reqsk immediately with __reqsk_free().
Thus, we must stop the new reqsk's timer before jumping to the
label, but the timer might be missed since the cited commit,
resulting in UAF.
As we are in the original reqsk's timer context, we can safely
call timer_delete_sync() for the new reqsk.
Let's pass false to __inet_csk_reqsk_queue_drop() to stop
the new reqsk's timer.
Fixes: 83fccfc394 ("inet: fix potential deadlock in reqsk_queue_unlink()")
Reported-by: Damiano Melotti <melotti@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260506035954.1563147-2-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sol_tcp_sockopt() only checks if sk->sk_protocol is IPPROTO_TCP,
but RAW socket can bypass it:
socket(AF_INET, SOCK_RAW, IPPROTO_TCP)
Let's use sk_is_tcp().
Note that initially sol_tcp_sockopt() checked sk->sk_prot->setsockopt.
Fixes: 2ab42c7b87 ("bpf: Check the protocol of a sock to agree the calls to bpf_setsockopt().")
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20260504210610.180150-7-kuniyu@google.com
