18 Commits

Author SHA1 Message Date
Chanwon Park
e7a5f249e6 mm: re-enable kswapd when memory pressure subsides or demotion is toggled
If kswapd fails to reclaim pages from a node MAX_RECLAIM_RETRIES in a
row, kswapd on that node gets disabled. That is, the system won't wakeup
kswapd for that node until page reclamation is observed at least once.
That reclamation is mostly done by direct reclaim, which in turn enables
kswapd back.

However, on systems with CXL memory nodes, workloads with high anon page
usage can disable kswapd indefinitely, without triggering direct
reclaim. This can be reproduced with following steps:

   numa node 0   (32GB memory, 48 CPUs)
   numa node 2~5 (512GB CXL memory, 128GB each)
   (numa node 1 is disabled)
   swap space 8GB

   1) Set /sys/kernel/mm/demotion_enabled to 0.
   2) Set /proc/sys/kernel/numa_balancing to 0.
   3) Run a process that allocates and random accesses 500GB of anon
      pages.
   4) Let the process exit normally.

During 3), free memory on node 0 gets lower than low watermark, and
kswapd runs and depletes swap space. Then, kswapd fails consecutively
and gets disabled. Allocation afterwards happens on CXL memory, so node
0 never gains more memory pressure to trigger direct reclaim.

After 4), kswapd on node 0 remains disabled, and tasks running on that
node are unable to swap. If you turn on NUMA_BALANCING_MEMORY_TIERING
and demotion now, it won't work properly since kswapd is disabled.

To mitigate this problem, reset kswapd_failures to 0 on following
conditions:

   a) ZONE_BELOW_HIGH bit of a zone in hopeless node with a fallback
      memory node gets cleared.
   b) demotion_enabled is changed from false to true.

Rationale for a):
   ZONE_BELOW_HIGH bit being cleared might be a sign that the node may
   be reclaimable afterwards. This won't help much if the memory-hungry
   process keeps running without freeing anything, but at least the node
   will go back to reclaimable state when the process exits.

Rationale for b):
   When demotion_enabled is false, kswapd can only reclaim anon pages by
   swapping them out to swap space. If demotion_enabled is turned on,
   kswapd can demote anon pages to another node for reclaiming. So, the
   original failure count for determining reclaimability is no longer
   valid.

Since kswapd_failures resets may be missed by ++ operation, it is
changed from int to atomic_t.

[akpm@linux-foundation.org: tweak whitespace]
Link: https://lkml.kernel.org/r/aL6qGi69jWXfPc4D@pcw-MS-7D22
Signed-off-by: Chanwon Park <flyinrm@gmail.com>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-09-21 14:22:29 -07:00
Yueyang Pan
8147bc15b4 mm/show_mem: add trylock while printing alloc info
In production, show_mem() can be called concurrently from two different
entities, for example one from oom_kill_process() another from
__alloc_pages_slowpath from another kthread.  This patch adds a spinlock
and invokes trylock before printing out the kernel alloc info in
show_mem().  This way two alloc info won't interleave with each other,
which then makes parsing easier.

Link: https://lkml.kernel.org/r/4ed91296e0c595d945a38458f7a8d9611b0c1e52.1756897825.git.pyyjason@gmail.com
Signed-off-by: Yueyang Pan <pyyjason@gmail.com>
Acked-by: Usama Arif <usamaarif642@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Zi Yan <ziy@nvidia.com>
Acked-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-09-21 14:22:18 -07:00
Yueyang Pan
9abd8bd4c6 mm/show_mem: dump the status of the mem alloc profiling before printing
This patchset fixes two issues we saw in production rollout.  

The first issue is that we saw all zero output of memory allocation
profiling information from show_mem() if CONFIG_MEM_ALLOC_PROFILING is set
and sysctl.vm.mem_profiling=0.  This cause ambiguity as we don't know what
0B actually means in the output.  It can mean either memory allocation
profiling is temporary disabled or the allocation at that position is
actually 0.  Such ambiguity will make further parsing harder as we cannot
differentiate between two case.

The second issue is that multiple entities can call show_mem() which
messed up the allocation info in dmesg.  We saw outputs like this: 

    327 MiB    83635 mm/compaction.c:1880 func:compaction_alloc
   48.4 GiB 12684937 mm/memory.c:1061 func:folio_prealloc
   7.48 GiB    10899 mm/huge_memory.c:1159 func:vma_alloc_anon_folio_pmd
    298 MiB    95216 kernel/fork.c:318 func:alloc_thread_stack_node
    250 MiB    63901 mm/zsmalloc.c:987 func:alloc_zspage
    1.42 GiB   372527 mm/memory.c:1063 func:folio_prealloc
    1.17 GiB    95693 mm/slub.c:2424 func:alloc_slab_page
     651 MiB   166732 mm/readahead.c:270 func:page_cache_ra_unbounded
     419 MiB   107261 net/core/page_pool.c:572 func:__page_pool_alloc_pages_slow
     404 MiB   103425 arch/x86/mm/pgtable.c:25 func:pte_alloc_one

The above example is because one kthread invokes show_mem() from
__alloc_pages_slowpath while kernel itself calls oom_kill_process()


This patch (of 2):

This patch prints the status of the memory allocation profiling before
__show_mem actually prints the detailed allocation info.  This way will
let us know the `0B` we saw in allocation info is because the profiling is
disabled or the allocation is actually 0B.

Link: https://lkml.kernel.org/r/cover.1756897825.git.pyyjason@gmail.com
Link: https://lkml.kernel.org/r/d7998ea0ddc2ea1a78bb6e89adf530526f76679a.1756897825.git.pyyjason@gmail.com
Signed-off-by: Yueyang Pan <pyyjason@gmail.com>
Acked-by: Usama Arif <usamaarif642@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Zi Yan <ziy@nvidia.com>
Acked-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-09-21 14:22:18 -07:00
Thadeu Lima de Souza Cascardo
0c83e7faa8 mm: show_mem: show number of zspages in show_free_areas
When OOM is triggered, it will show where the pages might be for each
zone.  When using zram or zswap, it might look like lots of pages are
missing.  After this patch, zspages are shown as below.

[   48.792859] Node 0 DMA free:2812kB boost:0kB min:60kB low:72kB high:84kB reserved_highatomic:0KB free_highatomic:0KB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB writepending:0kB zspages:11160kB present:15992kB managed:15360kB mlocked:0kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB
[   48.792962] lowmem_reserve[]: 0 956 956 956 956
[   48.792988] Node 0 DMA32 free:3512kB boost:0kB min:3912kB low:4888kB high:5864kB reserved_highatomic:0KB free_highatomic:0KB active_anon:0kB inactive_anon:28kB active_file:8kB inactive_file:16kB unevictable:0kB writepending:0kB zspages:916780kB present:1032064kB managed:978944kB mlocked:0kB bounce:0kB free_pcp:500kB local_pcp:248kB free_cma:0kB
[   48.793118] lowmem_reserve[]: 0 0 0 0 0

Link: https://lkml.kernel.org/r/20250902-show_mem_zspages-v2-1-545daaa8b410@igalia.com
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Zi Yan <ziy@nvidia.com>
Acked-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Nhat Pham <nphamcs@gmail.com>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-09-21 14:22:11 -07:00
Vlastimil Babka
8356a5a3b0 mm, vmstat: remove the NR_WRITEBACK_TEMP node_stat_item counter
The only user of the counter (FUSE) was removed in commit 0c58a97f91
("fuse: remove tmp folio for writebacks and internal rb tree") so follow
the established pattern of removing the counter and hardcoding 0 in
meminfo output, as done recently with NR_BOUNCE.  Update documentation for
procfs, including for the value for Bounce that was missed when removing
its counter.

Also remove the mention of NR_WRITEBACK_TEMP implications from a comment
in wb_position_ratio(). The rest of the comment there about fuse setting
bdi->max_ratio to 1% is still correct.

[vbabka@suse.cz: v2]
  Link: https://lkml.kernel.org/r/5a848e15-6a57-4ecb-a015-d4f358b8a5d3@suse.cz
Link: https://lkml.kernel.org/r/20250625-nr_writeback_removal-v1-1-7f2a0df70faa@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Joanne Koong <joannelkoong@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill A. Shuemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Maxim Patlasov <mpatlasov@parallels.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Zach O'Keefe <zokeefe@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-07-19 18:59:47 -07:00
Linus Torvalds
00c010e130 Merge tag 'mm-stable-2025-05-31-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:

 - "Add folio_mk_pte()" from Matthew Wilcox simplifies the act of
   creating a pte which addresses the first page in a folio and reduces
   the amount of plumbing which architecture must implement to provide
   this.

 - "Misc folio patches for 6.16" from Matthew Wilcox is a shower of
   largely unrelated folio infrastructure changes which clean things up
   and better prepare us for future work.

 - "memory,x86,acpi: hotplug memory alignment advisement" from Gregory
   Price adds early-init code to prevent x86 from leaving physical
   memory unused when physical address regions are not aligned to memory
   block size.

 - "mm/compaction: allow more aggressive proactive compaction" from
   Michal Clapinski provides some tuning of the (sadly, hard-coded (more
   sadly, not auto-tuned)) thresholds for our invokation of proactive
   compaction. In a simple test case, the reduction of a guest VM's
   memory consumption was dramatic.

 - "Minor cleanups and improvements to swap freeing code" from Kemeng
   Shi provides some code cleaups and a small efficiency improvement to
   this part of our swap handling code.

 - "ptrace: introduce PTRACE_SET_SYSCALL_INFO API" from Dmitry Levin
   adds the ability for a ptracer to modify syscalls arguments. At this
   time we can alter only "system call information that are used by
   strace system call tampering, namely, syscall number, syscall
   arguments, and syscall return value.

   This series should have been incorporated into mm.git's "non-MM"
   branch, but I goofed.

 - "fs/proc: extend the PAGEMAP_SCAN ioctl to report guard regions" from
   Andrei Vagin extends the info returned by the PAGEMAP_SCAN ioctl
   against /proc/pid/pagemap. This permits CRIU to more efficiently get
   at the info about guard regions.

 - "Fix parameter passed to page_mapcount_is_type()" from Gavin Shan
   implements that fix. No runtime effect is expected because
   validate_page_before_insert() happens to fix up this error.

 - "kernel/events/uprobes: uprobe_write_opcode() rewrite" from David
   Hildenbrand basically brings uprobe text poking into the current
   decade. Remove a bunch of hand-rolled implementation in favor of
   using more current facilities.

 - "mm/ptdump: Drop assumption that pxd_val() is u64" from Anshuman
   Khandual provides enhancements and generalizations to the pte dumping
   code. This might be needed when 128-bit Page Table Descriptors are
   enabled for ARM.

 - "Always call constructor for kernel page tables" from Kevin Brodsky
   ensures that the ctor/dtor is always called for kernel pgtables, as
   it already is for user pgtables.

   This permits the addition of more functionality such as "insert hooks
   to protect page tables". This change does result in various
   architectures performing unnecesary work, but this is fixed up where
   it is anticipated to occur.

 - "Rust support for mm_struct, vm_area_struct, and mmap" from Alice
   Ryhl adds plumbing to permit Rust access to core MM structures.

 - "fix incorrectly disallowed anonymous VMA merges" from Lorenzo
   Stoakes takes advantage of some VMA merging opportunities which we've
   been missing for 15 years.

 - "mm/madvise: batch tlb flushes for MADV_DONTNEED and MADV_FREE" from
   SeongJae Park optimizes process_madvise()'s TLB flushing.

   Instead of flushing each address range in the provided iovec, we
   batch the flushing across all the iovec entries. The syscall's cost
   was approximately halved with a microbenchmark which was designed to
   load this particular operation.

 - "Track node vacancy to reduce worst case allocation counts" from
   Sidhartha Kumar makes the maple tree smarter about its node
   preallocation.

   stress-ng mmap performance increased by single-digit percentages and
   the amount of unnecessarily preallocated memory was dramaticelly
   reduced.

 - "mm/gup: Minor fix, cleanup and improvements" from Baoquan He removes
   a few unnecessary things which Baoquan noted when reading the code.

 - ""Enhance sysfs handling for memory hotplug in weighted interleave"
   from Rakie Kim "enhances the weighted interleave policy in the memory
   management subsystem by improving sysfs handling, fixing memory
   leaks, and introducing dynamic sysfs updates for memory hotplug
   support". Fixes things on error paths which we are unlikely to hit.

 - "mm/damon: auto-tune DAMOS for NUMA setups including tiered memory"
   from SeongJae Park introduces new DAMOS quota goal metrics which
   eliminate the manual tuning which is required when utilizing DAMON
   for memory tiering.

 - "mm/vmalloc.c: code cleanup and improvements" from Baoquan He
   provides cleanups and small efficiency improvements which Baoquan
   found via code inspection.

 - "vmscan: enforce mems_effective during demotion" from Gregory Price
   changes reclaim to respect cpuset.mems_effective during demotion when
   possible. because presently, reclaim explicitly ignores
   cpuset.mems_effective when demoting, which may cause the cpuset
   settings to violated.

   This is useful for isolating workloads on a multi-tenant system from
   certain classes of memory more consistently.

 - "Clean up split_huge_pmd_locked() and remove unnecessary folio
   pointers" from Gavin Guo provides minor cleanups and efficiency gains
   in in the huge page splitting and migrating code.

 - "Use kmem_cache for memcg alloc" from Huan Yang creates a slab cache
   for `struct mem_cgroup', yielding improved memory utilization.

 - "add max arg to swappiness in memory.reclaim and lru_gen" from
   Zhongkun He adds a new "max" argument to the "swappiness=" argument
   for memory.reclaim MGLRU's lru_gen.

   This directs proactive reclaim to reclaim from only anon folios
   rather than file-backed folios.

 - "kexec: introduce Kexec HandOver (KHO)" from Mike Rapoport is the
   first step on the path to permitting the kernel to maintain existing
   VMs while replacing the host kernel via file-based kexec. At this
   time only memblock's reserve_mem is preserved.

 - "mm: Introduce for_each_valid_pfn()" from David Woodhouse provides
   and uses a smarter way of looping over a pfn range. By skipping
   ranges of invalid pfns.

 - "sched/numa: Skip VMA scanning on memory pinned to one NUMA node via
   cpuset.mems" from Libo Chen removes a lot of pointless VMA scanning
   when a task is pinned a single NUMA mode.

   Dramatic performance benefits were seen in some real world cases.

 - "JFS: Implement migrate_folio for jfs_metapage_aops" from Shivank
   Garg addresses a warning which occurs during memory compaction when
   using JFS.

 - "move all VMA allocation, freeing and duplication logic to mm" from
   Lorenzo Stoakes moves some VMA code from kernel/fork.c into the more
   appropriate mm/vma.c.

 - "mm, swap: clean up swap cache mapping helper" from Kairui Song
   provides code consolidation and cleanups related to the folio_index()
   function.

 - "mm/gup: Cleanup memfd_pin_folios()" from Vishal Moola does that.

 - "memcg: Fix test_memcg_min/low test failures" from Waiman Long
   addresses some bogus failures which are being reported by the
   test_memcontrol selftest.

 - "eliminate mmap() retry merge, add .mmap_prepare hook" from Lorenzo
   Stoakes commences the deprecation of file_operations.mmap() in favor
   of the new file_operations.mmap_prepare().

   The latter is more restrictive and prevents drivers from messing with
   things in ways which, amongst other problems, may defeat VMA merging.

 - "memcg: decouple memcg and objcg stocks"" from Shakeel Butt decouples
   the per-cpu memcg charge cache from the objcg's one.

   This is a step along the way to making memcg and objcg charging
   NMI-safe, which is a BPF requirement.

 - "mm/damon: minor fixups and improvements for code, tests, and
   documents" from SeongJae Park is yet another batch of miscellaneous
   DAMON changes. Fix and improve minor problems in code, tests and
   documents.

 - "memcg: make memcg stats irq safe" from Shakeel Butt converts memcg
   stats to be irq safe. Another step along the way to making memcg
   charging and stats updates NMI-safe, a BPF requirement.

 - "Let unmap_hugepage_range() and several related functions take folio
   instead of page" from Fan Ni provides folio conversions in the
   hugetlb code.

* tag 'mm-stable-2025-05-31-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (285 commits)
  mm: pcp: increase pcp->free_count threshold to trigger free_high
  mm/hugetlb: convert use of struct page to folio in __unmap_hugepage_range()
  mm/hugetlb: refactor __unmap_hugepage_range() to take folio instead of page
  mm/hugetlb: refactor unmap_hugepage_range() to take folio instead of page
  mm/hugetlb: pass folio instead of page to unmap_ref_private()
  memcg: objcg stock trylock without irq disabling
  memcg: no stock lock for cpu hot-unplug
  memcg: make __mod_memcg_lruvec_state re-entrant safe against irqs
  memcg: make count_memcg_events re-entrant safe against irqs
  memcg: make mod_memcg_state re-entrant safe against irqs
  memcg: move preempt disable to callers of memcg_rstat_updated
  memcg: memcg_rstat_updated re-entrant safe against irqs
  mm: khugepaged: decouple SHMEM and file folios' collapse
  selftests/eventfd: correct test name and improve messages
  alloc_tag: check mem_profiling_support in alloc_tag_init
  Docs/damon: update titles and brief introductions to explain DAMOS
  selftests/damon/_damon_sysfs: read tried regions directories in order
  mm/damon/tests/core-kunit: add a test for damos_set_filters_default_reject()
  mm/damon/paddr: remove unused variable, folio_list, in damon_pa_stat()
  mm/damon/sysfs-schemes: fix wrong comment on damons_sysfs_quota_goal_metric_strs
  ...
2025-05-31 15:44:16 -07:00
gaoxu
4f219913c1 mm: add nr_free_highatomic in show_free_areas
commit c928807f6f6b6("mm/page_alloc: keep track of free highatomic")
adds a new variable nr_free_highatomic, which is useful for analyzing low
mem issues. add nr_free_highatomic in show_free_areas.

Signed-off-by: gao xu <gaoxu2@honor.com>
Link: https://lkml.kernel.org/r/d92eeff74f7a4578a14ac777cfe3603a@honor.com
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Barry Song <baohua@kernel.org>
Acked-by: David Rientjes <rientjes@google.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-05-11 17:48:32 -07:00
Ye Liu
26d4d18b79 mm/show_mem: optimize si_meminfo_node by reducing redundant code
Refactors the si_meminfo_node() function by reducing redundant code and
improving readability.

Moved the calculation of managed_pages inside the existing loop that
processes pgdat->node_zones, eliminating the need for a separate loop.

Simplified the logic by removing unnecessary preprocessor conditionals.

Ensured that both totalram, totalhigh, and other memory statistics are
consistently set without duplication.

This change results in cleaner and more efficient code without altering
functionality.

Link: https://lkml.kernel.org/r/20250325073803.852594-1-ye.liu@linux.dev
Signed-off-by: Ye Liu <liuye@kylinos.cn>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-05-11 17:48:08 -07:00
Christoph Hellwig
194df9f66d mm: remove NR_BOUNCE zone stat
The stat is always 0 now, so remove it and hardwire the user visible
output to 0.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250505081138.3435992-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-05-05 13:22:39 -06:00
Nico Pache
835de37603 meminfo: add a per node counter for balloon drivers
Patch series "track memory used by balloon drivers", v2.

This series introduces a way to track memory used by balloon drivers.

Add a NR_BALLOON_PAGES counter to track how many pages are reclaimed by
the balloon drivers.  First add the accounting, then updates the balloon
drivers (virtio, Hyper-V, VMware, Pseries-cmm, and Xen) to maintain this
counter.  The virtio, Vmware, and pseries-cmm balloon drivers utilize the
balloon_compaction interface to allocate and free balloon pages.  Other
balloon drivers will have to maintain this counter manually.

This makes the information visible in memory reporting interfaces like
/proc/meminfo, show_mem, and OOM reporting.

This provides admins visibility into their VM balloon sizes without
requiring different virtualization tooling.  Furthermore, this information
is helpful when debugging an OOM inside a VM.


This patch (of 4):

Add NR_BALLOON_PAGES counter to track memory used by balloon drivers and
expose it through /proc/meminfo and other memory reporting interfaces.

[npache@redhat.com: document Balloon Meminfo entry]
  Link: https://lkml.kernel.org/r/a0315ccf-f244-460e-8643-fd7388724fe5@redhat.com
Link: https://lkml.kernel.org/r/20250314213757.244258-1-npache@redhat.com
Link: https://lkml.kernel.org/r/20250314213757.244258-2-npache@redhat.com
Signed-off-by: Nico Pache <npache@redhat.com>
Cc: Alexander Atanasov <alexander.atanasov@virtuozzo.com>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Juegren Gross <jgross@suse.com>
Cc: Kanchana P Sridhar <kanchana.p.sridhar@intel.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-03-21 22:03:13 -07:00
Thorsten Blum
e8c1a296b8 mm/show_mem: use str_yes_no() helper in show_free_areas()
Remove hard-coded strings by using the str_yes_no() helper function.

Link: https://lkml.kernel.org/r/20241026103552.6790-2-thorsten.blum@linux.dev
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-11-07 14:38:08 -08:00
Kent Overstreet
fd00be9afa mm/show_mem.c: report alloc tags in human readable units
We already do this when reporting slab info - more consistent and more
readable.

Link: https://lkml.kernel.org/r/20240906005337.1220091-1-kent.overstreet@linux.dev
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-09-17 01:07:00 -07:00
Suren Baghdasaryan
1438d349d1 lib: add memory allocations report in show_mem()
Include allocations in show_mem reports.

Link: https://lkml.kernel.org/r/20240321163705.3067592-33-surenb@google.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Kees Cook <keescook@chromium.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andreas Hindborg <a.hindborg@samsung.com>
Cc: Benno Lossin <benno.lossin@proton.me>
Cc: "Björn Roy Baron" <bjorn3_gh@protonmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Gary Guo <gary@garyguo.net>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Wedson Almeida Filho <wedsonaf@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-04-25 20:55:57 -07:00
Kirill A. Shutemov
fd37721803 mm, treewide: introduce NR_PAGE_ORDERS
NR_PAGE_ORDERS defines the number of page orders supported by the page
allocator, ranging from 0 to MAX_ORDER, MAX_ORDER + 1 in total.

NR_PAGE_ORDERS assists in defining arrays of page orders and allows for
more natural iteration over them.

[kirill.shutemov@linux.intel.com: fixup for kerneldoc warning]
  Link: https://lkml.kernel.org/r/20240101111512.7empzyifq7kxtzk3@box
Link: https://lkml.kernel.org/r/20231228144704.14033-1-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-01-08 15:27:15 -08:00
Lorenzo Stoakes
80e4a765a7 mm: refactor si_mem_available()
si_mem_available() needlessly places LRU statistics into an array before
retrieving only two of them, simply access those directly.

In addition, refactor the code so that the blocks of code which calculate
the page cache and reclaimable components each resemble one another to
clearly indicate we cap both against wmark_low in the same fashion.

Link: https://lkml.kernel.org/r/20230827110848.43510-1-lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-04 10:32:19 -07:00
Hugh Dickins
8dbbc49345 mm,thp: no space after colon in Mem-Info fields
Patch series "mm,thp: fix sloppy text output".

Three independent trivial patches, fixing sloppy text output which has
annoyed me; but might risk surprising a parser, so any can be dropped.


This patch (of 3):

The SysRq-m or OOM Mem-Info dmesg showed (long lines containing) ... 
shmem:NkB shmem_thp: NkB shmem_pmdmapped: NkB anon_thp: NkB ...

Delete the space after the colon after shmem_thp, shmem_pmdmapped,
anon_thp: as the shmem example shows, no other fields have a space after
the colon in this output.

Link: https://lkml.kernel.org/r/dc264fd6-40bb-6510-db36-9340a5f01d94@google.com
Link: https://lkml.kernel.org/r/c1edd7da-5493-c542-6feb-92452b4dab3b@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-21 13:38:01 -07:00
Kefeng Wang
1279aa0656 mm: make show_free_areas() static
All callers of show_free_areas() pass 0 and NULL, so we can directly use
show_mem() instead of show_free_areas(0, NULL), which could make
show_free_areas() a static function.

Link: https://lkml.kernel.org/r/20230630062253.189440-2-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-18 10:12:02 -07:00
Kefeng Wang
e9aae17092 mm: page_alloc: collect mem statistic into show_mem.c
Let's move show_mem.c from lib to mm, as it belongs memory subsystem, also
split some memory statistic related functions from page_alloc.c to
show_mem.c, and we cleanup some unneeded include.

There is no functional change.

Link: https://lkml.kernel.org/r/20230516063821.121844-5-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Len Brown <len.brown@intel.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09 16:25:22 -07:00