Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Replace busylock at the Tx queuing layer with a lockless list.
Resulting in a 300% (4x) improvement on heavy TX workloads, sending
twice the number of packets per second, for half the cpu cycles.
- Allow constantly busy flows to migrate to a more suitable CPU/NIC
queue.
Normally we perform queue re-selection when flow comes out of idle,
but under extreme circumstances the flows may be constantly busy.
Add sysctl to allow periodic rehashing even if it'd risk packet
reordering.
- Optimize the NAPI skb cache, make it larger, use it in more paths.
- Attempt returning Tx skbs to the originating CPU (like we already
did for Rx skbs).
- Various data structure layout and prefetch optimizations from Eric.
- Remove ktime_get() from the recvmsg() fast path, ktime_get() is
sadly quite expensive on recent AMD machines.
- Extend threaded NAPI polling to allow the kthread busy poll for
packets.
- Make MPTCP use Rx backlog processing. This lowers the lock
pressure, improving the Rx performance.
- Support memcg accounting of MPTCP socket memory.
- Allow admin to opt sockets out of global protocol memory accounting
(using a sysctl or BPF-based policy). The global limits are a poor
fit for modern container workloads, where limits are imposed using
cgroups.
- Improve heuristics for when to kick off AF_UNIX garbage collection.
- Allow users to control TCP SACK compression, and default to 33% of
RTT.
- Add tcp_rcvbuf_low_rtt sysctl to let datacenter users avoid
unnecessarily aggressive rcvbuf growth and overshot when the
connection RTT is low.
- Preserve skb metadata space across skb_push / skb_pull operations.
- Support for IPIP encapsulation in the nftables flowtable offload.
- Support appending IP interface information to ICMP messages (RFC
5837).
- Support setting max record size in TLS (RFC 8449).
- Remove taking rtnl_lock from RTM_GETNEIGHTBL and RTM_SETNEIGHTBL.
- Use a dedicated lock (and RCU) in MPLS, instead of rtnl_lock.
- Let users configure the number of write buffers in SMC.
- Add new struct sockaddr_unsized for sockaddr of unknown length,
from Kees.
- Some conversions away from the crypto_ahash API, from Eric Biggers.
- Some preparations for slimming down struct page.
- YAML Netlink protocol spec for WireGuard.
- Add a tool on top of YAML Netlink specs/lib for reporting commonly
computed derived statistics and summarized system state.
Driver API:
- Add CAN XL support to the CAN Netlink interface.
- Add uAPI for reporting PHY Mean Square Error (MSE) diagnostics, as
defined by the OPEN Alliance's "Advanced diagnostic features for
100BASE-T1 automotive Ethernet PHYs" specification.
- Add DPLL phase-adjust-gran pin attribute (and implement it in
zl3073x).
- Refactor xfrm_input lock to reduce contention when NIC offloads
IPsec and performs RSS.
- Add info to devlink params whether the current setting is the
default or a user override. Allow resetting back to default.
- Add standard device stats for PSP crypto offload.
- Leverage DSA frame broadcast to implement simple HSR frame
duplication for a lot of switches without dedicated HSR offload.
- Add uAPI defines for 1.6Tbps link modes.
Device drivers:
- Add Motorcomm YT921x gigabit Ethernet switch support.
- Add MUCSE driver for N500/N210 1GbE NIC series.
- Convert drivers to support dedicated ops for timestamping control,
and away from the direct IOCTL handling. While at it support GET
operations for PHY timestamping.
- Add (and convert most drivers to) a dedicated ethtool callback for
reading the Rx ring count.
- Significant refactoring efforts in the STMMAC driver, which
supports Synopsys turn-key MAC IP integrated into a ton of SoCs.
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support PPS in/out on all pins
- Intel (100G, ice, idpf):
- ice: implement standard ethtool and timestamping stats
- i40e: support setting the max number of MAC addresses per VF
- iavf: support RSS of GTP tunnels for 5G and LTE deployments
- nVidia/Mellanox (mlx5):
- reduce downtime on interface reconfiguration
- disable being an XDP redirect target by default (same as
other drivers) to avoid wasting resources if feature is
unused
- Meta (fbnic):
- add support for Linux-managed PCS on 25G, 50G, and 100G links
- Wangxun:
- support Rx descriptor merge, and Tx head writeback
- support Rx coalescing offload
- support 25G SPF and 40G QSFP modules
- Ethernet virtual:
- Google (gve):
- allow ethtool to configure rx_buf_len
- implement XDP HW RX Timestamping support for DQ descriptor
format
- Microsoft vNIC (mana):
- support HW link state events
- handle hardware recovery events when probing the device
- Ethernet NICs consumer, and embedded:
- usbnet: add support for Byte Queue Limits (BQL)
- AMD (amd-xgbe):
- add device selftests
- NXP (enetc):
- add i.MX94 support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- bcmasp: add support for PHY-based Wake-on-LAN
- Broadcom switches (b53):
- support port isolation
- support BCM5389/97/98 and BCM63XX ARL formats
- Lantiq/MaxLinear switches:
- support bridge FDB entries on the CPU port
- use regmap for register access
- allow user to enable/disable learning
- support Energy Efficient Ethernet
- support configuring RMII clock delays
- add tagging driver for MaxLinear GSW1xx switches
- Synopsys (stmmac):
- support using the HW clock in free running mode
- add Eswin EIC7700 support
- add Rockchip RK3506 support
- add Altera Agilex5 support
- Cadence (macb):
- cleanup and consolidate descriptor and DMA address handling
- add EyeQ5 support
- TI:
- icssg-prueth: support AF_XDP
- Airoha access points:
- add missing Ethernet stats and link state callback
- add AN7583 support
- support out-of-order Tx completion processing
- Power over Ethernet:
- pd692x0: preserve PSE configuration across reboots
- add support for TPS23881B devices
- Ethernet PHYs:
- Open Alliance OATC14 10BASE-T1S PHY cable diagnostic support
- Support 50G SerDes and 100G interfaces in Linux-managed PHYs
- micrel:
- support for non PTP SKUs of lan8814
- enable in-band auto-negotiation on lan8814
- realtek:
- cable testing support on RTL8224
- interrupt support on RTL8221B
- motorcomm: support for PHY LEDs on YT853
- microchip: support for LAN867X Rev.D0 PHYs w/ SQI and cable diag
- mscc: support for PHY LED control
- CAN drivers:
- m_can: add support for optional reset and system wake up
- remove can_change_mtu() obsoleted by core handling
- mcp251xfd: support GPIO controller functionality
- Bluetooth:
- add initial support for PASTa
- WiFi:
- split ieee80211.h file, it's way too big
- improvements in VHT radiotap reporting, S1G, Channel Switch
Announcement handling, rate tracking in mesh networks
- improve multi-radio monitor mode support, and add a cfg80211
debugfs interface for it
- HT action frame handling on 6 GHz
- initial chanctx work towards NAN
- MU-MIMO sniffer improvements
- WiFi drivers:
- RealTek (rtw89):
- support USB devices RTL8852AU and RTL8852CU
- initial work for RTL8922DE
- improved injection support
- Intel:
- iwlwifi: new sniffer API support
- MediaTek (mt76):
- WED support for >32-bit DMA
- airoha NPU support
- regdomain improvements
- continued WiFi7/MLO work
- Qualcomm/Atheros:
- ath10k: factory test support
- ath11k: TX power insertion support
- ath12k: BSS color change support
- ath12k: statistics improvements
- brcmfmac: Acer A1 840 tablet quirk
- rtl8xxxu: 40 MHz connection fixes/support"
* tag 'net-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1381 commits)
net: page_pool: sanitise allocation order
net: page pool: xa init with destroy on pp init
net/mlx5e: Support XDP target xmit with dummy program
net/mlx5e: Update XDP features in switch channels
selftests/tc-testing: Test CAKE scheduler when enqueue drops packets
net/sched: sch_cake: Fix incorrect qlen reduction in cake_drop
wireguard: netlink: generate netlink code
wireguard: uapi: generate header with ynl-gen
wireguard: uapi: move flag enums
wireguard: uapi: move enum wg_cmd
wireguard: netlink: add YNL specification
selftests: drv-net: Fix tolerance calculation in devlink_rate_tc_bw.py
selftests: drv-net: Fix and clarify TC bandwidth split in devlink_rate_tc_bw.py
selftests: drv-net: Set shell=True for sysfs writes in devlink_rate_tc_bw.py
selftests: drv-net: Use Iperf3Runner in devlink_rate_tc_bw.py
selftests: drv-net: introduce Iperf3Runner for measurement use cases
selftests: drv-net: Add devlink_rate_tc_bw.py to TEST_PROGS
net: ps3_gelic_net: Use napi_alloc_skb() and napi_gro_receive()
Documentation: net: dsa: mention simple HSR offload helpers
Documentation: net: dsa: mention availability of RedBox
...
Pull vfs inode updates from Christian Brauner:
"Features:
- Hide inode->i_state behind accessors. Open-coded accesses prevent
asserting they are done correctly. One obvious aspect is locking,
but significantly more can be checked. For example it can be
detected when the code is clearing flags which are already missing,
or is setting flags when it is illegal (e.g., I_FREEING when
->i_count > 0)
- Provide accessors for ->i_state, converts all filesystems using
coccinelle and manual conversions (btrfs, ceph, smb, f2fs, gfs2,
overlayfs, nilfs2, xfs), and makes plain ->i_state access fail to
compile
- Rework I_NEW handling to operate without fences, simplifying the
code after the accessor infrastructure is in place
Cleanups:
- Move wait_on_inode() from writeback.h to fs.h
- Spell out fenced ->i_state accesses with explicit smp_wmb/smp_rmb
for clarity
- Cosmetic fixes to LRU handling
- Push list presence check into inode_io_list_del()
- Touch up predicts in __d_lookup_rcu()
- ocfs2: retire ocfs2_drop_inode() and I_WILL_FREE usage
- Assert on ->i_count in iput_final()
- Assert ->i_lock held in __iget()
Fixes:
- Add missing fences to I_NEW handling"
* tag 'vfs-6.19-rc1.inode' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (22 commits)
dcache: touch up predicts in __d_lookup_rcu()
fs: push list presence check into inode_io_list_del()
fs: cosmetic fixes to lru handling
fs: rework I_NEW handling to operate without fences
fs: make plain ->i_state access fail to compile
xfs: use the new ->i_state accessors
nilfs2: use the new ->i_state accessors
overlayfs: use the new ->i_state accessors
gfs2: use the new ->i_state accessors
f2fs: use the new ->i_state accessors
smb: use the new ->i_state accessors
ceph: use the new ->i_state accessors
btrfs: use the new ->i_state accessors
Manual conversion to use ->i_state accessors of all places not covered by coccinelle
Coccinelle-based conversion to use ->i_state accessors
fs: provide accessors for ->i_state
fs: spell out fenced ->i_state accesses with explicit smp_wmb/smp_rmb
fs: move wait_on_inode() from writeback.h to fs.h
fs: add missing fences to I_NEW handling
ocfs2: retire ocfs2_drop_inode() and I_WILL_FREE usage
...
Fix an uninitialised variable (key) in afs_alloc_anon_key() by setting it
to cell->anonymous_key. Without this change, the error check may return a
false failure with a bad error number.
Most of the time this is unlikely to happen because the first encounter
with afs_alloc_anon_key() will usually be from (auto)mount, for which all
subsequent operations must wait - apart from other (auto)mounts. Once the
call->anonymous_key is allocated, all further calls to afs_request_key()
will skip the call to afs_alloc_anon_key() for that cell.
Fixes: d27c712578 ("afs: Fix delayed allocation of a cell's anonymous key")
Reported-by: Paulo Alcantra <pc@manguebit.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Paulo Alcantara <pc@manguebit.org>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: syzbot+41c68824eefb67cdf00c@syzkaller.appspotmail.com
cc: linux-afs@lists.infradead.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The allocation of a cell's anonymous key is done in a background thread
along with other cell setup such as doing a DNS upcall. In the reported
bug, this is triggered by afs_parse_source() parsing the device name given
to mount() and calling afs_lookup_cell() with the name of the cell.
The normal key lookup then tries to use the key description on the
anonymous authentication key as the reference for request_key() - but it
may not yet be set and so an oops can happen.
This has been made more likely to happen by the fix for dynamic lookup
failure.
Fix this by firstly allocating a reference name and attaching it to the
afs_cell record when the record is created. It can share the memory
allocation with the cell name (unfortunately it can't just overlap the cell
name by prepending it with "afs@" as the cell name already has a '.'
prepended for other purposes). This reference name is then passed to
request_key().
Secondly, the anon key is now allocated on demand at the point a key is
requested in afs_request_key() if it is not already allocated. A mutex is
used to prevent multiple allocation for a cell.
Thirdly, make afs_request_key_rcu() return NULL if the anonymous key isn't
yet allocated (if we need it) and then the caller can return -ECHILD to
drop out of RCU-mode and afs_request_key() can be called.
Note that the anonymous key is kind of necessary to make the key lookup
cache work as that doesn't currently cache a negative lookup, but it's
probably worth some investigation to see if NULL can be used instead.
Fixes: 330e2c5148 ("afs: Fix dynamic lookup to fail on cell lookup failure")
Reported-by: syzbot+41c68824eefb67cdf00c@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://patch.msgid.link/800328.1764325145@warthog.procyon.org.uk
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Cross-merge networking fixes after downstream PR (net-6.18-rc7).
No conflicts, adjacent changes:
tools/testing/selftests/net/af_unix/Makefile
e1bb28bf13 ("selftest: af_unix: Add test for SO_PEEK_OFF.")
45a1cd8346 ("selftests: af_unix: Add tests for ECONNRESET and EOF semantics")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Update all struct proto_ops bind() callback function prototypes from
"struct sockaddr *" to "struct sockaddr_unsized *" to avoid lying to the
compiler about object sizes. Calls into struct proto handlers gain casts
that will be removed in the struct proto conversion patch.
No binary changes expected.
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20251104002617.2752303-2-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a process tries to access an entry in /afs, normally what happens is
that an automount dentry is created by ->lookup() and then triggered, which
jumps through the ->d_automount() op. Currently, afs_dynroot_lookup() does
not do cell DNS lookup, leaving that to afs_d_automount() to perform -
however, it is possible to use access() or stat() on the automount point,
which will always return successfully, have briefly created an afs_cell
record if one did not already exist.
This means that something like:
test -d "/afs/.west" && echo Directory exists
will print "Directory exists" even though no such cell is configured. This
breaks the "west" python module available on PIP as it expects this access
to fail.
Now, it could be possible to make afs_dynroot_lookup() perform the DNS[*]
lookup, but that would make "ls --color /afs" do this for each cell in /afs
that is listed but not yet probed. kafs-client, probably wrongly, preloads
the entire cell database and all the known cells are then listed in /afs -
and doing ls /afs would be very, very slow, especially if any cell supplied
addresses but was wholly inaccessible.
[*] When I say "DNS", actually read getaddrinfo(), which could use any one
of a host of mechanisms. Could also use static configuration.
To fix this, make the following changes:
(1) Create an enum to specify the origination point of a call to
afs_lookup_cell() and pass this value into that function in place of
the "excl" parameter (which can be derived from it). There are six
points of origination:
- Cell preload through /proc/net/afs/cells
- Root cell config through /proc/net/afs/rootcell
- Lookup in dynamic root
- Automount trigger
- Direct mount with mount() syscall
- Alias check where YFS tells us the cell name is different
(2) Add an extra state into the afs_cell state machine to indicate a cell
that's been initialised, but not yet looked up. This is separate from
one that can be considered active and has been looked up at least
once.
(3) Make afs_lookup_cell() vary its behaviour more, depending on where it
was called from:
If called from preload or root cell config, DNS lookup will not happen
until we definitely want to use the cell (dynroot mount, automount,
direct mount or alias check). The cell will appear in /afs but stat()
won't trigger DNS lookup.
If the cell already exists, dynroot will not wait for the DNS lookup
to complete. If the cell did not already exist, dynroot will wait.
If called from automount, direct mount or alias check, it will wait
for the DNS lookup to complete.
(4) Make afs_lookup_cell() return an error if lookup failed in one way or
another. We try to return -ENOENT if the DNS says the cell does not
exist and -EDESTADDRREQ if we couldn't access the DNS.
Reported-by: Markus Suvanto <markus.suvanto@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220685
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://patch.msgid.link/1784747.1761158912@warthog.procyon.org.uk
Fixes: 1d0b929fc0 ("afs: Change dynroot to create contents on demand")
Tested-by: Markus Suvanto <markus.suvanto@gmail.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Pull d_name audit update from Al Viro:
"Simplifying ->d_name audits, easy part.
Turn dentry->d_name into an anon union of const struct qsrt (d_name
itself) and a writable alias (__d_name).
With constification of some struct qstr * arguments of functions that
get &dentry->d_name passed to them, that ends up with all
modifications provably done only in fs/dcache.c (and a fairly small
part of it).
Any new places doing modifications will be easy to find - grep for
__d_name will suffice"
* tag 'pull-qstr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
make it easier to catch those who try to modify ->d_name
generic_ci_validate_strict_name(): constify name argument
afs_dir_search: constify qstr argument
afs_edit_dir_{add,remove}(): constify qstr argument
exfat_find(): constify qstr argument
security_dentry_init_security(): constify qstr argument
Pull fs_context updates from Al Viro:
"Change vfs_parse_fs_string() calling conventions
Get rid of the length argument (almost all callers pass strlen() of
the string argument there), add vfs_parse_fs_qstr() for the cases that
do want separate length"
* tag 'pull-fs_context' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
do_nfs4_mount(): switch to vfs_parse_fs_string()
change the calling conventions for vfs_parse_fs_string()
Pull afs updates from Christian Brauner:
"This contains the change to enable afs to support RENAME_NOREPLACE and
RENAME_EXCHANGE if the server supports it"
* tag 'vfs-6.18-rc1.afs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
afs: Add support for RENAME_NOREPLACE and RENAME_EXCHANGE
Pull vfs workqueue updates from Christian Brauner:
"This contains various workqueue changes affecting the filesystem
layer.
Currently if a user enqueue a work item using schedule_delayed_work()
the used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies
to schedule_work() that is using system_wq and queue_work(), that
makes use again of WORK_CPU_UNBOUND.
This replaces the use of system_wq and system_unbound_wq. system_wq is
a per-CPU workqueue which isn't very obvious from the name and
system_unbound_wq is to be used when locality is not required.
So this renames system_wq to system_percpu_wq, and system_unbound_wq
to system_dfl_wq.
This also adds a new WQ_PERCPU flag to allow the fs subsystem users to
explicitly request the use of per-CPU behavior. Both WQ_UNBOUND and
WQ_PERCPU flags coexist for one release cycle to allow callers to
transition their calls. WQ_UNBOUND will be removed in a next release
cycle"
* tag 'vfs-6.18-rc1.workqueue' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: WQ_PERCPU added to alloc_workqueue users
fs: replace use of system_wq with system_percpu_wq
fs: replace use of system_unbound_wq with system_dfl_wq
Pull misc vfs updates from Christian Brauner:
"This contains the usual selections of misc updates for this cycle.
Features:
- Add "initramfs_options" parameter to set initramfs mount options.
This allows to add specific mount options to the rootfs to e.g.,
limit the memory size
- Add RWF_NOSIGNAL flag for pwritev2()
Add RWF_NOSIGNAL flag for pwritev2. This flag prevents the SIGPIPE
signal from being raised when writing on disconnected pipes or
sockets. The flag is handled directly by the pipe filesystem and
converted to the existing MSG_NOSIGNAL flag for sockets
- Allow to pass pid namespace as procfs mount option
Ever since the introduction of pid namespaces, procfs has had very
implicit behaviour surrounding them (the pidns used by a procfs
mount is auto-selected based on the mounting process's active
pidns, and the pidns itself is basically hidden once the mount has
been constructed)
This implicit behaviour has historically meant that userspace was
required to do some special dances in order to configure the pidns
of a procfs mount as desired. Examples include:
* In order to bypass the mnt_too_revealing() check, Kubernetes
creates a procfs mount from an empty pidns so that user
namespaced containers can be nested (without this, the nested
containers would fail to mount procfs)
But this requires forking off a helper process because you cannot
just one-shot this using mount(2)
* Container runtimes in general need to fork into a container
before configuring its mounts, which can lead to security issues
in the case of shared-pidns containers (a privileged process in
the pidns can interact with your container runtime process)
While SUID_DUMP_DISABLE and user namespaces make this less of an
issue, the strict need for this due to a minor uAPI wart is kind
of unfortunate
Things would be much easier if there was a way for userspace to
just specify the pidns they want. So this pull request contains
changes to implement a new "pidns" argument which can be set
using fsconfig(2):
fsconfig(procfd, FSCONFIG_SET_FD, "pidns", NULL, nsfd);
fsconfig(procfd, FSCONFIG_SET_STRING, "pidns", "/proc/self/ns/pid", 0);
or classic mount(2) / mount(8):
// mount -t proc -o pidns=/proc/self/ns/pid proc /tmp/proc
mount("proc", "/tmp/proc", "proc", MS_..., "pidns=/proc/self/ns/pid");
Cleanups:
- Remove the last references to EXPORT_OP_ASYNC_LOCK
- Make file_remove_privs_flags() static
- Remove redundant __GFP_NOWARN when GFP_NOWAIT is used
- Use try_cmpxchg() in start_dir_add()
- Use try_cmpxchg() in sb_init_done_wq()
- Replace offsetof() with struct_size() in ioctl_file_dedupe_range()
- Remove vfs_ioctl() export
- Replace rwlock() with spinlock in epoll code as rwlock causes
priority inversion on preempt rt kernels
- Make ns_entries in fs/proc/namespaces const
- Use a switch() statement() in init_special_inode() just like we do
in may_open()
- Use struct_size() in dir_add() in the initramfs code
- Use str_plural() in rd_load_image()
- Replace strcpy() with strscpy() in find_link()
- Rename generic_delete_inode() to inode_just_drop() and
generic_drop_inode() to inode_generic_drop()
- Remove unused arguments from fcntl_{g,s}et_rw_hint()
Fixes:
- Document @name parameter for name_contains_dotdot() helper
- Fix spelling mistake
- Always return zero from replace_fd() instead of the file descriptor
number
- Limit the size for copy_file_range() in compat mode to prevent a
signed overflow
- Fix debugfs mount options not being applied
- Verify the inode mode when loading it from disk in minixfs
- Verify the inode mode when loading it from disk in cramfs
- Don't trigger automounts with RESOLVE_NO_XDEV
If openat2() was called with RESOLVE_NO_XDEV it didn't traverse
through automounts, but could still trigger them
- Add FL_RECLAIM flag to show_fl_flags() macro so it appears in
tracepoints
- Fix unused variable warning in rd_load_image() on s390
- Make INITRAMFS_PRESERVE_MTIME depend on BLK_DEV_INITRD
- Use ns_capable_noaudit() when determining net sysctl permissions
- Don't call path_put() under namespace semaphore in listmount() and
statmount()"
* tag 'vfs-6.18-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (38 commits)
fcntl: trim arguments
listmount: don't call path_put() under namespace semaphore
statmount: don't call path_put() under namespace semaphore
pid: use ns_capable_noaudit() when determining net sysctl permissions
fs: rename generic_delete_inode() and generic_drop_inode()
init: INITRAMFS_PRESERVE_MTIME should depend on BLK_DEV_INITRD
initramfs: Replace strcpy() with strscpy() in find_link()
initrd: Use str_plural() in rd_load_image()
initramfs: Use struct_size() helper to improve dir_add()
initrd: Fix unused variable warning in rd_load_image() on s390
fs: use the switch statement in init_special_inode()
fs/proc/namespaces: make ns_entries const
filelock: add FL_RECLAIM to show_fl_flags() macro
eventpoll: Replace rwlock with spinlock
selftests/proc: add tests for new pidns APIs
procfs: add "pidns" mount option
pidns: move is-ancestor logic to helper
openat2: don't trigger automounts with RESOLVE_NO_XDEV
namei: move cross-device check to __traverse_mounts
namei: remove LOOKUP_NO_XDEV check from handle_mounts
...
afs_put_server() accessed server->debug_id before the NULL check, which
could lead to a null pointer dereference. Move the debug_id assignment,
ensuring we never dereference a NULL server pointer.
Fixes: 2757a4dc18 ("afs: Fix access after dec in put functions")
Cc: stable@vger.kernel.org
Signed-off-by: Zhen Ni <zhen.ni@easystack.cn>
Acked-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
This patch adds a new WQ_PERCPU flag to all the fs subsystem users to
explicitly request the use of the per-CPU behavior. Both flags coexist
for one release cycle to allow callers to transition their calls.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
All existing users have been updated accordingly.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://lore.kernel.org/20250916082906.77439-4-marco.crivellari@suse.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
system_unbound_wq should be the default workqueue so as not to enforce
locality constraints for random work whenever it's not required.
Adding system_dfl_wq to encourage its use when unbound work should be used.
The old system_unbound_wq will be kept for a few release cycles.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://lore.kernel.org/20250916082906.77439-2-marco.crivellari@suse.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Nothing outside of fs/dcache.c has any business modifying
dentry names; passing &dentry->d_name as an argument should
have that argument declared as a const pointer.
Reviewed-by: David Howells <dhowells@redhat.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
generic_delete_inode() is rather misleading for what the routine is
doing. inode_just_drop() should be much clearer.
The new naming is inconsistent with generic_drop_inode(), so rename that
one as well with inode_ as the suffix.
No functional changes.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Absolute majority of callers are passing the 4th argument equal to
strlen() of the 3rd one.
Drop the v_size argument, add vfs_parse_fs_qstr() for the cases that
want independent length.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull mmap_prepare updates from Christian Brauner:
"Last cycle we introduce f_op->mmap_prepare() in c84bf6dd2b ("mm:
introduce new .mmap_prepare() file callback").
This is preferred to the existing f_op->mmap() hook as it does require
a VMA to be established yet, thus allowing the mmap logic to invoke
this hook far, far earlier, prior to inserting a VMA into the virtual
address space, or performing any other heavy handed operations.
This allows for much simpler unwinding on error, and for there to be a
single attempt at merging a VMA rather than having to possibly
reattempt a merge based on potentially altered VMA state.
Far more importantly, it prevents inappropriate manipulation of
incompletely initialised VMA state, which is something that has been
the cause of bugs and complexity in the past.
The intent is to gradually deprecate f_op->mmap, and in that vein this
series coverts the majority of file systems to using f_op->mmap_prepare.
Prerequisite steps are taken - firstly ensuring all checks for mmap
capabilities use the file_has_valid_mmap_hooks() helper rather than
directly checking for f_op->mmap (which is now not a valid check) and
secondly updating daxdev_mapping_supported() to not require a VMA
parameter to allow ext4 and xfs to be converted.
Commit bb666b7c27 ("mm: add mmap_prepare() compatibility layer for
nested file systems") handles the nasty edge-case of nested file
systems like overlayfs, which introduces a compatibility shim to allow
f_op->mmap_prepare() to be invoked from an f_op->mmap() callback.
This allows for nested filesystems to continue to function correctly
with all file systems regardless of which callback is used. Once we
finally convert all file systems, this shim can be removed.
As a result, ecryptfs, fuse, and overlayfs remain unaltered so they
can nest all other file systems.
We additionally do not update resctl - as this requires an update to
remap_pfn_range() (or an alternative to it) which we defer to a later
series, equally we do not update cramfs which needs a mixed mapping
insertion with the same issue, nor do we update procfs, hugetlbfs,
syfs or kernfs all of which require VMAs for internal state and hooks.
We shall return to all of these later"
* tag 'vfs-6.17-rc1.mmap_prepare' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
doc: update porting, vfs documentation to describe mmap_prepare()
fs: replace mmap hook with .mmap_prepare for simple mappings
fs: convert most other generic_file_*mmap() users to .mmap_prepare()
fs: convert simple use of generic_file_*_mmap() to .mmap_prepare()
mm/filemap: introduce generic_file_*_mmap_prepare() helpers
fs/xfs: transition from deprecated .mmap hook to .mmap_prepare
fs/ext4: transition from deprecated .mmap hook to .mmap_prepare
fs/dax: make it possible to check dev dax support without a VMA
fs: consistently use can_mmap_file() helper
mm/nommu: use file_has_valid_mmap_hooks() helper
mm: rename call_mmap/mmap_prepare to vfs_mmap/mmap_prepare
Pull dentry d_flags updates from Al Viro:
"The current exclusion rules for dentry->d_flags stores are rather
unpleasant. The basic rules are simple:
- stores to dentry->d_flags are OK under dentry->d_lock
- stores to dentry->d_flags are OK in the dentry constructor, before
becomes potentially visible to other threads
Unfortunately, there's a couple of exceptions to that, and that's
where the headache comes from.
The main PITA comes from d_set_d_op(); that primitive sets ->d_op of
dentry and adjusts the flags that correspond to presence of individual
methods. It's very easy to misuse; existing uses _are_ safe, but proof
of correctness is brittle.
Use in __d_alloc() is safe (we are within a constructor), but we might
as well precalculate the initial value of 'd_flags' when we set the
default ->d_op for given superblock and set 'd_flags' directly instead
of messing with that helper.
The reasons why other uses are safe are bloody convoluted; I'm not
going to reproduce it here. See [1] for gory details, if you care. The
critical part is using d_set_d_op() only just prior to
d_splice_alias(), which makes a combination of d_splice_alias() with
setting ->d_op, etc a natural replacement primitive.
Better yet, if we go that way, it's easy to take setting ->d_op and
modifying 'd_flags' under ->d_lock, which eliminates the headache as
far as 'd_flags' exclusion rules are concerned. Other exceptions are
minor and easy to deal with.
What this series does:
- d_set_d_op() is no longer available; instead a new primitive
(d_splice_alias_ops()) is provided, equivalent to combination of
d_set_d_op() and d_splice_alias().
- new field of struct super_block - 's_d_flags'. This sets the
default value of 'd_flags' to be used when allocating dentries on
this filesystem.
- new primitive for setting 's_d_op': set_default_d_op(). This
replaces stores to 's_d_op' at mount time.
All in-tree filesystems converted; out-of-tree ones will get caught
by the compiler ('s_d_op' is renamed, so stores to it will be
caught). 's_d_flags' is set by the same primitive to match the
's_d_op'.
- a lot of filesystems had sb->s_d_op->d_delete equal to
always_delete_dentry; that is equivalent to setting
DCACHE_DONTCACHE in 'd_flags', so such filesystems can bloody well
set that bit in 's_d_flags' and drop 'd_delete()' from
dentry_operations.
In quite a few cases that results in empty dentry_operations, which
means that we can get rid of those.
- kill simple_dentry_operations - not needed anymore
- massage d_alloc_parallel() to get rid of the other exception wrt
'd_flags' stores - we can set DCACHE_PAR_LOOKUP as soon as we
allocate the new dentry; no need to delay that until we commit to
using the sucker.
As the result, 'd_flags' stores are all either under ->d_lock or done
before the dentry becomes visible in any shared data structures"
Link: https://lore.kernel.org/all/20250224010624.GT1977892@ZenIV/ [1]
* tag 'pull-dcache' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (21 commits)
configfs: use DCACHE_DONTCACHE
debugfs: use DCACHE_DONTCACHE
efivarfs: use DCACHE_DONTCACHE instead of always_delete_dentry()
9p: don't bother with always_delete_dentry
ramfs, hugetlbfs, mqueue: set DCACHE_DONTCACHE
kill simple_dentry_operations
devpts, sunrpc, hostfs: don't bother with ->d_op
shmem: no dentry retention past the refcount reaching zero
d_alloc_parallel(): set DCACHE_PAR_LOOKUP earlier
make d_set_d_op() static
simple_lookup(): just set DCACHE_DONTCACHE
tracefs: Add d_delete to remove negative dentries
set_default_d_op(): calculate the matching value for ->d_flags
correct the set of flags forbidden at d_set_d_op() time
split d_flags calculation out of d_set_d_op()
new helper: set_default_d_op()
fuse: no need for special dentry_operations for root dentry
switch procfs from d_set_d_op() to d_splice_alias_ops()
new helper: d_splice_alias_ops()
procfs: kill ->proc_dops
...
syzbot reported a bug in in afs_put_vlserverlist.
kAFS: bad VL server IP address
BUG: unable to handle page fault for address: fffffffffffffffa
...
Oops: Oops: 0002 [#1] SMP KASAN PTI
...
RIP: 0010:refcount_dec_and_test include/linux/refcount.h:450 [inline]
RIP: 0010:afs_put_vlserverlist+0x3a/0x220 fs/afs/vl_list.c:67
...
Call Trace:
<TASK>
afs_alloc_cell fs/afs/cell.c:218 [inline]
afs_lookup_cell+0x12a5/0x1680 fs/afs/cell.c:264
afs_cell_init+0x17a/0x380 fs/afs/cell.c:386
afs_proc_rootcell_write+0x21f/0x290 fs/afs/proc.c:247
proc_simple_write+0x114/0x1b0 fs/proc/generic.c:825
pde_write fs/proc/inode.c:330 [inline]
proc_reg_write+0x23d/0x330 fs/proc/inode.c:342
vfs_write+0x25c/0x1180 fs/read_write.c:682
ksys_write+0x12a/0x240 fs/read_write.c:736
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xcd/0x260 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Because afs_parse_text_addrs() parses incorrectly, its return value -EINVAL
is assigned to vllist, which results in -EINVAL being used as the vllist
address when afs_put_vlserverlist() is executed.
Set the vllist value to NULL when a parsing error occurs to avoid this
issue.
Fixes: e2c2cb8ef0 ("afs: Simplify cell record handling")
Reported-by: syzbot+5c042fbab0b292c98fc6@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=5c042fbab0b292c98fc6
Tested-by: syzbot+5c042fbab0b292c98fc6@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/4119365.1753108011@warthog.procyon.org.uk
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Update nearly all generic_file_mmap() and generic_file_readonly_mmap()
callers to use generic_file_mmap_prepare() and
generic_file_readonly_mmap_prepare() respectively.
We update blkdev, 9p, afs, erofs, ext2, nfs, ntfs3, smb, ubifs and vboxsf
file systems this way.
Remaining users we cannot yet update are ecryptfs, fuse and cramfs. The
former two are nested file systems that must support any underlying file
ssytem, and cramfs inserts a mixed mapping which currently requires a VMA.
Once all file systems have been converted to mmap_prepare(), we can then
update nested file systems.
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Link: https://lore.kernel.org/08db85970d89b17a995d2cffae96fb4cc462377f.1750099179.git.lorenzo.stoakes@oracle.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
... to be used instead of manually assigning to ->s_d_op.
All in-tree filesystem converted (and field itself is renamed,
so any out-of-tree ones in need of conversion will be caught
by compiler).
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull netfs updates from Christian Brauner:
- The main API document has been extensively updated/rewritten
- Fix an oops in write-retry due to mis-resetting the I/O iterator
- Fix the recording of transferred bytes for short DIO reads
- Fix a request's work item to not require a reference, thereby
avoiding the need to get rid of it in BH/IRQ context
- Fix waiting and waking to be consistent about the waitqueue used
- Remove NETFS_SREQ_SEEK_DATA_READ, NETFS_INVALID_WRITE,
NETFS_ICTX_WRITETHROUGH, NETFS_READ_HOLE_CLEAR,
NETFS_RREQ_DONT_UNLOCK_FOLIOS, and NETFS_RREQ_BLOCKED
- Reorder structs to eliminate holes
- Remove netfs_io_request::ractl
- Only provide proc_link field if CONFIG_PROC_FS=y
- Remove folio_queue::marks3
- Fix undifferentiation of DIO reads from unbuffered reads
* tag 'vfs-6.16-rc1.netfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
netfs: Fix undifferentiation of DIO reads from unbuffered reads
netfs: Fix wait/wake to be consistent about the waitqueue used
netfs: Fix the request's work item to not require a ref
netfs: Fix setting of transferred bytes with short DIO reads
netfs: Fix oops in write-retry from mis-resetting the subreq iterator
fs/netfs: remove unused flag NETFS_RREQ_BLOCKED
fs/netfs: remove unused flag NETFS_RREQ_DONT_UNLOCK_FOLIOS
folio_queue: remove unused field `marks3`
fs/netfs: declare field `proc_link` only if CONFIG_PROC_FS=y
fs/netfs: remove `netfs_io_request.ractl`
fs/netfs: reorder struct fields to eliminate holes
fs/netfs: remove unused enum choice NETFS_READ_HOLE_CLEAR
fs/netfs: remove unused flag NETFS_ICTX_WRITETHROUGH
fs/netfs: remove unused source NETFS_INVALID_WRITE
fs/netfs: remove unused flag NETFS_SREQ_SEEK_DATA_READ
Pull automount updates from Al Viro:
"Automount wart removal
A bunch of odd boilerplate gone from instances - the reason for
those was the need to protect the yet-to-be-attched mount from
mark_mounts_for_expiry() deciding to take it out.
But that's easy to detect and take care of in mark_mounts_for_expiry()
itself; no need to have every instance simulate mount being busy by
grabbing an extra reference to it, with finish_automount() undoing
that once it attaches that mount.
Should've done it that way from the very beginning... This is a
flagday change, thankfully there are very few instances.
vfs_submount() is gone - its sole remaining user (trace_automount)
had been switched to saner primitives"
* tag 'pull-automount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
kill vfs_submount()
saner calling conventions for ->d_automount()
Pull networking updates from Paolo Abeni:
"Core:
- Implement the Device Memory TCP transmit path, allowing zero-copy
data transmission on top of TCP from e.g. GPU memory to the wire.
- Move all the IPv6 routing tables management outside the RTNL scope,
under its own lock and RCU. The route control path is now 3x times
faster.
- Convert queue related netlink ops to instance lock, reducing again
the scope of the RTNL lock. This improves the control plane
scalability.
- Refactor the software crc32c implementation, removing unneeded
abstraction layers and improving significantly the related
micro-benchmarks.
- Optimize the GRO engine for UDP-tunneled traffic, for a 10%
performance improvement in related stream tests.
- Cover more per-CPU storage with local nested BH locking; this is a
prep work to remove the current per-CPU lock in local_bh_disable()
on PREMPT_RT.
- Introduce and use nlmsg_payload helper, combining buffer bounds
verification with accessing payload carried by netlink messages.
Netfilter:
- Rewrite the procfs conntrack table implementation, improving
considerably the dump performance. A lot of user-space tools still
use this interface.
- Implement support for wildcard netdevice in netdev basechain and
flowtables.
- Integrate conntrack information into nft trace infrastructure.
- Export set count and backend name to userspace, for better
introspection.
BPF:
- BPF qdisc support: BPF-qdisc can be implemented with BPF struct_ops
programs and can be controlled in similar way to traditional qdiscs
using the "tc qdisc" command.
- Refactor the UDP socket iterator, addressing long standing issues
WRT duplicate hits or missed sockets.
Protocols:
- Improve TCP receive buffer auto-tuning and increase the default
upper bound for the receive buffer; overall this improves the
single flow maximum thoughput on 200Gbs link by over 60%.
- Add AFS GSSAPI security class to AF_RXRPC; it provides transport
security for connections to the AFS fileserver and VL server.
- Improve TCP multipath routing, so that the sources address always
matches the nexthop device.
- Introduce SO_PASSRIGHTS for AF_UNIX, to allow disabling SCM_RIGHTS,
and thus preventing DoS caused by passing around problematic FDs.
- Retire DCCP socket. DCCP only receives updates for bugs, and major
distros disable it by default. Its removal allows for better
organisation of TCP fields to reduce the number of cache lines hit
in the fast path.
- Extend TCP drop-reason support to cover PAWS checks.
Driver API:
- Reorganize PTP ioctl flag support to require an explicit opt-in for
the drivers, avoiding the problem of drivers not rejecting new
unsupported flags.
- Converted several device drivers to timestamping APIs.
- Introduce per-PHY ethtool dump helpers, improving the support for
dump operations targeting PHYs.
Tests and tooling:
- Add support for classic netlink in user space C codegen, so that
ynl-c can now read, create and modify links, routes addresses and
qdisc layer configuration.
- Add ynl sub-types for binary attributes, allowing ynl-c to output
known struct instead of raw binary data, clarifying the classic
netlink output.
- Extend MPTCP selftests to improve the code-coverage.
- Add tests for XDP tail adjustment in AF_XDP.
New hardware / drivers:
- OpenVPN virtual driver: offload OpenVPN data channels processing to
the kernel-space, increasing the data transfer throughput WRT the
user-space implementation.
- Renesas glue driver for the gigabit ethernet RZ/V2H(P) SoC.
- Broadcom asp-v3.0 ethernet driver.
- AMD Renoir ethernet device.
- ReakTek MT9888 2.5G ethernet PHY driver.
- Aeonsemi 10G C45 PHYs driver.
Drivers:
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- refactor the steering table handling to significantly
reduce the amount of memory used
- add support for complex matches in H/W flow steering
- improve flow streeing error handling
- convert to netdev instance locking
- Intel (100G, ice, igb, ixgbe, idpf):
- ice: add switchdev support for LLDP traffic over VF
- ixgbe: add firmware manipulation and regions devlink support
- igb: introduce support for frame transmission premption
- igb: adds persistent NAPI configuration
- idpf: introduce RDMA support
- idpf: add initial PTP support
- Meta (fbnic):
- extend hardware stats coverage
- add devlink dev flash support
- Broadcom (bnxt):
- add support for RX-side device memory TCP
- Wangxun (txgbe):
- implement support for udp tunnel offload
- complete PTP and SRIOV support for AML 25G/10G devices
- Ethernet NICs embedded and virtual:
- Google (gve):
- add device memory TCP TX support
- Amazon (ena):
- support persistent per-NAPI config
- Airoha:
- add H/W support for L2 traffic offload
- add per flow stats for flow offloading
- RealTek (rtl8211): add support for WoL magic packet
- Synopsys (stmmac):
- dwmac-socfpga 1000BaseX support
- add Loongson-2K3000 support
- introduce support for hardware-accelerated VLAN stripping
- Broadcom (bcmgenet):
- expose more H/W stats
- Freescale (enetc, dpaa2-eth):
- enetc: add MAC filter, VLAN filter RSS and loopback support
- dpaa2-eth: convert to H/W timestamping APIs
- vxlan: convert FDB table to rhashtable, for better scalabilty
- veth: apply qdisc backpressure on full ring to reduce TX drops
- Ethernet switches:
- Microchip (kzZ88x3): add ETS scheduler support
- Ethernet PHYs:
- RealTek (rtl8211):
- add support for WoL magic packet
- add support for PHY LEDs
- CAN:
- Adds RZ/G3E CANFD support to the rcar_canfd driver.
- Preparatory work for CAN-XL support.
- Add self-tests framework with support for CAN physical interfaces.
- WiFi:
- mac80211:
- scan improvements with multi-link operation (MLO)
- Qualcomm (ath12k):
- enable AHB support for IPQ5332
- add monitor interface support to QCN9274
- add multi-link operation support to WCN7850
- add 802.11d scan offload support to WCN7850
- monitor mode for WCN7850, better 6 GHz regulatory
- Qualcomm (ath11k):
- restore hibernation support
- MediaTek (mt76):
- WiFi-7 improvements
- implement support for mt7990
- Intel (iwlwifi):
- enhanced multi-link single-radio (EMLSR) support on 5 GHz links
- rework device configuration
- RealTek (rtw88):
- improve throughput for RTL8814AU
- RealTek (rtw89):
- add multi-link operation support
- STA/P2P concurrency improvements
- support different SAR configs by antenna
- Bluetooth:
- introduce HCI Driver protocol
- btintel_pcie: do not generate coredump for diagnostic events
- btusb: add HCI Drv commands for configuring altsetting
- btusb: add RTL8851BE device 0x0bda:0xb850
- btusb: add new VID/PID 13d3/3584 for MT7922
- btusb: add new VID/PID 13d3/3630 and 13d3/3613 for MT7925
- btnxpuart: implement host-wakeup feature"
* tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1611 commits)
selftests/bpf: Fix bpf selftest build warning
selftests: netfilter: Fix skip of wildcard interface test
net: phy: mscc: Stop clearing the the UDPv4 checksum for L2 frames
net: openvswitch: Fix the dead loop of MPLS parse
calipso: Don't call calipso functions for AF_INET sk.
selftests/tc-testing: Add a test for HFSC eltree double add with reentrant enqueue behaviour on netem
net_sched: hfsc: Address reentrant enqueue adding class to eltree twice
octeontx2-pf: QOS: Refactor TC_HTB_LEAF_DEL_LAST callback
octeontx2-pf: QOS: Perform cache sync on send queue teardown
net: mana: Add support for Multi Vports on Bare metal
net: devmem: ncdevmem: remove unused variable
net: devmem: ksft: upgrade rx test to send 1K data
net: devmem: ksft: add 5 tuple FS support
net: devmem: ksft: add exit_wait to make rx test pass
net: devmem: ksft: add ipv4 support
net: devmem: preserve sockc_err
page_pool: fix ugly page_pool formatting
net: devmem: move list_add to net_devmem_bind_dmabuf.
selftests: netfilter: nft_queue.sh: include file transfer duration in log message
net: phy: mscc: Fix memory leak when using one step timestamping
...
Pull vfs directory lookup updates from Christian Brauner:
"This contains cleanups for the lookup_one*() family of helpers.
We expose a set of functions with names containing "lookup_one_len"
and others without the "_len". This difference has nothing to do with
"len". It's rater a historical accident that can be confusing.
The functions without "_len" take a "mnt_idmap" pointer. This is found
in the "vfsmount" and that is an important question when choosing
which to use: do you have a vfsmount, or are you "inside" the
filesystem. A related question is "is permission checking relevant
here?".
nfsd and cachefiles *do* have a vfsmount but *don't* use the non-_len
functions. They pass nop_mnt_idmap and refuse to work on filesystems
which have any other idmap.
This work changes nfsd and cachefile to use the lookup_one family of
functions and to explictily pass &nop_mnt_idmap which is consistent
with all other vfs interfaces used where &nop_mnt_idmap is explicitly
passed.
The remaining uses of the "_one" functions do not require permission
checks so these are renamed to be "_noperm" and the permission
checking is removed.
This series also changes these lookup function to take a qstr instead
of separate name and len. In many cases this simplifies the call"
* tag 'vfs-6.16-rc1.async.dir' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
VFS: change lookup_one_common and lookup_noperm_common to take a qstr
Use try_lookup_noperm() instead of d_hash_and_lookup() outside of VFS
VFS: rename lookup_one_len family to lookup_noperm and remove permission check
cachefiles: Use lookup_one() rather than lookup_one_len()
nfsd: Use lookup_one() rather than lookup_one_len()
VFS: improve interface for lookup_one functions
When the netfs_io_request struct's work item is queued, it must be supplied
with a ref to the work item struct to prevent it being deallocated whilst
on the queue or whilst it is being processed. This is tricky to manage as
we have to get a ref before we try and queue it and then we may find it's
already queued and is thus already holding a ref - in which case we have to
try and get rid of the ref again.
The problem comes if we're in BH or IRQ context and need to drop the ref:
if netfs_put_request() reduces the count to 0, we have to do the cleanup -
but the cleanup may need to wait.
Fix this by adding a new work item to the request, ->cleanup_work, and
dispatching that when the refcount hits zero. That can then synchronously
cancel any outstanding work on the main work item before doing the cleanup.
Adding a new work item also deals with another problem upstream where it's
sometimes changing the work func in the put function and requeuing it -
which has occasionally in the past caused the cleanup to happen
incorrectly.
As a bonus, this allows us to get rid of the 'was_async' parameter from a
bunch of functions. This indicated whether the put function might not be
permitted to sleep.
Fixes: 3d3c950467 ("netfs: Provide readahead and readpage netfs helpers")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/20250519090707.2848510-4-dhowells@redhat.com
cc: Paulo Alcantara <pc@manguebit.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Steve French <stfrench@microsoft.com>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Currently the calling conventions for ->d_automount() instances have
an odd wart - returned new mount to be attached is expected to have
refcount 2.
That kludge is intended to make sure that mark_mounts_for_expiry() called
before we get around to attaching that new mount to the tree won't decide
to take it out. finish_automount() drops the extra reference after it's
done with attaching mount to the tree - or drops the reference twice in
case of error. ->d_automount() instances have rather counterintuitive
boilerplate in them.
There's a much simpler approach: have mark_mounts_for_expiry() skip the
mounts that are yet to be mounted. And to hell with grabbing/dropping
those extra references. Makes for simpler correctness analysis, at that...
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Acked-by: David Howells <dhowells@redhat.com>
Tested-by: David Howells <dhowells@redhat.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Allow the app to request that CHALLENGEs be passed to it through an
out-of-band queue that allows recvmsg() to pick it up so that the app can
add data to it with sendmsg().
This will allow the application (AFS or userspace) to interact with the
process if it wants to and put values into user-defined fields. This will
be used by AFS when talking to a fileserver to supply that fileserver with
a crypto key by which callback RPCs can be encrypted (ie. notifications
from the fileserver to the client).
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20250411095303.2316168-5-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A number of functions separately furnish an AF_RXRPC socket with callback
function pointers into a kernel app (such as the AFS filesystem) that is
using it. Replace most of these with an ops table for the entire socket.
This makes it easier to add more callback functions.
Note that the call incoming data processing callback is retaind as that
gets set to different things, depending on the type of op.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20250411095303.2316168-3-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The lookup_one_len family of functions is (now) only used internally by
a filesystem on itself either
- in a context where permission checking is irrelevant such as by a
virtual filesystem populating itself, or xfs accessing its ORPHANAGE
or dquota accessing the quota file; or
- in a context where a permission check (MAY_EXEC on the parent) has just
been performed such as a network filesystem finding in "silly-rename"
file in the same directory. This is also the context after the
_parentat() functions where currently lookup_one_qstr_excl() is used.
So the permission check is pointless.
The name "one_len" is unhelpful in understanding the purpose of these
functions and should be changed. Most of the callers pass the len as
"strlen()" so using a qstr and QSTR() can simplify the code.
This patch renames these functions (include lookup_positive_unlocked()
which is part of the family despite the name) to have a name based on
"lookup_noperm". They are changed to receive a 'struct qstr' instead
of separate name and len. In a few cases the use of QSTR() results in a
new call to strlen().
try_lookup_noperm() takes a pointer to a qstr instead of the whole
qstr. This is consistent with d_hash_and_lookup() (which is nearly
identical) and useful for lookup_noperm_unlocked().
The new lookup_noperm_common() doesn't take a qstr yet. That will be
tidied up in a subsequent patch.
Signed-off-by: NeilBrown <neil@brown.name>
Link: https://lore.kernel.org/r/20250319031545.2999807-5-neil@brown.name
Signed-off-by: Christian Brauner <brauner@kernel.org>
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull vfs afs updates from Christian Brauner:
"This contains the work for afs for this cycle:
- Fix an occasional hang that's only really encountered when
rmmod'ing the kafs module
- Remove the "-o autocell" mount option. This is obsolete with the
dynamic root and removing it makes the next patch slightly easier
- Change how the dynamic root mount is constructed. Currently, the
root directory is (de)populated when it is (un)mounted if there are
cells already configured and, further, pairs of automount points
have to be created/removed each time a cell is added/deleted
This is changed so that readdir on the root dir lists all the known
cell automount pairs plus the @cell symlinks and the inodes and
dentries are constructed by lookup on demand. This simplifies the
cell management code
- A few improvements to the afs_volume and afs_server tracepoints
- Pass trace info into the afs_lookup_cell() function to allow the
trace log to indicate the purpose of the lookup
- Remove the 'net' parameter from afs_unuse_cell() as it's
superfluous
- In rxrpc, allow a kernel app (such as kafs) to store a word of
information on rxrpc_peer records
- Use the information stored on the rxrpc_peer record to point to the
afs_server record. This allows the server address lookup to be done
away with
- Simplify the afs_server ref/activity accounting to make each one
self-contained and not garbage collected from the cell management
work item
- Simplify the afs_cell ref/activity accounting to make each one of
these also self-contained and not driven by a central management
work item
The current code was intended to make it such that a single timer
for the namespace and one work item per cell could do all the work
required to maintain these records. This, however, made for some
sequencing problems when cleaning up these records. Further, the
attempt to pass refs along with timers and work items made getting
it right rather tricky when the timer or work item already had a
ref attached and now a ref had to be got rid of"
* tag 'vfs-6.15-rc1.afs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
afs: Simplify cell record handling
afs: Fix afs_server ref accounting
afs: Use the per-peer app data provided by rxrpc
rxrpc: Allow the app to store private data on peer structs
afs: Drop the net parameter from afs_unuse_cell()
afs: Make afs_lookup_cell() take a trace note
afs: Improve server refcount/active count tracing
afs: Improve afs_volume tracing to display a debug ID
afs: Change dynroot to create contents on demand
afs: Remove the "autocell" mount option
Pull vfs async dir updates from Christian Brauner:
"This contains cleanups that fell out of the work from async directory
handling:
- Change kern_path_locked() and user_path_locked_at() to never return
a negative dentry. This simplifies the usability of these helpers
in various places
- Drop d_exact_alias() from the remaining place in NFS where it is
still used. This also allows us to drop the d_exact_alias() helper
completely
- Drop an unnecessary call to fh_update() from nfsd_create_locked()
- Change i_op->mkdir() to return a struct dentry
Change vfs_mkdir() to return a dentry provided by the filesystems
which is hashed and positive. This allows us to reduce the number
of cases where the resulting dentry is not positive to very few
cases. The code in these places becomes simpler and easier to
understand.
- Repack DENTRY_* and LOOKUP_* flags"
* tag 'vfs-6.15-rc1.async.dir' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
doc: fix inline emphasis warning
VFS: Change vfs_mkdir() to return the dentry.
nfs: change mkdir inode_operation to return alternate dentry if needed.
fuse: return correct dentry for ->mkdir
ceph: return the correct dentry on mkdir
hostfs: store inode in dentry after mkdir if possible.
Change inode_operations.mkdir to return struct dentry *
nfsd: drop fh_update() from S_IFDIR branch of nfsd_create_locked()
nfs/vfs: discard d_exact_alias()
VFS: add common error checks to lookup_one_qstr_excl()
VFS: change kern_path_locked() and user_path_locked_at() to never return negative dentry
VFS: repack LOOKUP_ bit flags.
VFS: repack DENTRY_ flags.
Simplify afs_cell record handling to avoid very occasional races that cause
module removal to hang (it waits for all cell records to be removed).
There are two things that particularly contribute to the difficulty:
firstly, the code tries to pass a ref on the cell to the cell's maintenance
work item (which gets awkward if the work item is already queued); and,
secondly, there's an overall cell manager that tries to use just one timer
for the entire cell collection (to avoid having loads of timers). However,
both of these are probably unnecessarily restrictive.
To simplify this, the following changes are made:
(1) The cell record collection manager is removed. Each cell record
manages itself individually.
(2) Each afs_cell is given a second work item (cell->destroyer) that is
queued when its refcount reaches zero. This is not done in the
context of the putting thread as it might be in an inconvenient place
to sleep.
(3) Each afs_cell is given its own timer. The timer is used to expire the
cell record after a period of unuse if not otherwise pinned and can
also be used for other maintenance tasks if necessary (of which there
are currently none as DNS refresh is triggered by filesystem
operations).
(4) The afs_cell manager work item (cell->manager) is no longer given a
ref on the cell when queued; rather, the manager must be deleted.
This does away with the need to deal with the consequences of losing a
race to queue cell->manager. Clean up of extra queuing is deferred to
the destroyer.
(5) The cell destroyer work item makes sure the cell timer is removed and
that the normal cell work is cancelled before farming the actual
destruction off to RCU.
(6) When a network namespace is destroyed or the kafs module is unloaded,
it's now a simple matter of marking the namespace as dead then just
waking up all the cell work items. They will then remove and destroy
themselves once all remaining activity counts and/or a ref counts are
dropped. This makes sure that all server records are dropped first.
(7) The cell record state set is reduced to just four states: SETTING_UP,
ACTIVE, REMOVING and DEAD. The record persists in the active state
even when it's not being used until the time comes to remove it rather
than downgrading it to an inactive state from whence it can be
restored.
This means that the cell still appears in /proc and /afs when not in
use until it switches to the REMOVING state - at which point it is
removed.
Note that the REMOVING state is included so that someone wanting to
resurrect the cell record is forced to wait whilst the cell is torn
down in that state. Once it's in the DEAD state, it has been removed
from net->cells tree and is no longer findable and can be replaced.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20250224234154.2014840-16-dhowells@redhat.com/ # v1
Link: https://lore.kernel.org/r/20250310094206.801057-12-dhowells@redhat.com/ # v4
