Pull misc driver updates from Greg KH:
"Here is the big set of char, misc, iio, fpga, and other small driver
subsystems changes for 7.2-rc1.
Lots of little stuff in here, the majority being of course the IIO
driver updates, as a list they are:
- IIO driver updates and additions
- GPIB driver bugfixes and cleanups
- Android binder driver updates (rust and C version)
- counter driver updates
- MHI driver updates
- mei driver updates
- w1 driver updates
- interconnect driver updates
- Comedi driver fixes and updates
- some obsolete char drivers removed (applicom and dtlk)
- hwtracing driver updates
- other tiny driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (406 commits)
w1: ds2482: Use named initializers for arrays of i2c_device_data
firmware: stratix10-svc: Add support to query Arm Trusted Firmware (ATF) version
firmware: stratix10-rsu: avoid blocking reboot_image sysfs when busy
coresight: ultrasoc-smb: Fix OOB write in smb_sync_perf_buffer()
iio: adc: nxp-sar-adc: harden buffer ISR against per-channel read failure
iio: chemical: scd30: Replace manual locking with RAII locking
iio: light: tsl2591: remove unneeded tsl2591_compatible_als_persist_cycle()
iio: dac: ad5686: create bus ops struct
iio: dac: ad5686: cleanup doc header of local structs
iio: dac: ad5686: add control_sync() for single-channel devices
iio: dac: ad5686: add helpers to handle powerdown masks
iio: dac: ad5686: add of_match table to the spi driver
iio: dac: ad5686: drop enum id
iio: dac: ad5686: remove redundant register definition
iio: dac: ad5686: refactor include headers
iio: adc: ad4080: fix AD4880 chip ID
iio: light: veml3328: add support for new device
dt-bindings: iio: light: veml6030: add veml3328
fpga: microchip-spi: fix zero header_size OOB read in mpf_ops_parse_header()
fpga: dfl-afu: validate DMA mapping length in afu_dma_map_region()
...
Pull workqueue updates from Tejun Heo:
- Continued progress toward making alloc_workqueue() unbound by
default: more callers converted to WQ_PERCPU / system_percpu_wq /
system_dfl_wq, and new warnings for queues that use neither WQ_PERCPU
nor WQ_UNBOUND or the legacy system_wq / system_unbound_wq.
- Misc: drop the now-trivial apply_wqattrs_lock()/unlock() wrappers,
forbid the TEST_WORKQUEUE benchmark from being built-in, and fix a
spurious pointer level in the worker debug-dump path.
* tag 'wq-for-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
drm/bridge: anx7625: Add WQ_PERCPU add to alloc_workqueue
wifi: ath6kl: fix invalid workqueue flags in ath6kl_usb_create()
btrfs: Drop WQ_PERCPU from ordered_flags in btrfs_init_workqueues()
workqueue: Add warnings and ensure one among WQ_PERCPU or WQ_UNBOUND is present
workqueue: Add warnings and fallback if system_{unbound}_wq is used
workqueue: drop spurious '*' from print_worker_info() fn declaration
workqueue: forbid TEST_WORKQUEUE from being built-in
workqueue: drop apply_wqattrs_lock()/unlock() wrappers
umh: replace use of system_unbound_wq with system_dfl_wq
rapidio: rio: add WQ_PERCPU to alloc_workqueue users
media: ddbridge: add WQ_PERCPU to alloc_workqueue users
platform: cznic: turris-omnia-mcu: replace use of system_wq with system_percpu_wq
media: synopsys: hdmirx: replace use of system_unbound_wq with system_dfl_wq
virt: acrn: Add WQ_PERCPU to alloc_workqueue users
Pull x86 TDX updates from Dave Hansen:
"There are a few cleanups, and some changes that should allow TDX and
kexec to coexist nicely.
The biggest change, however, is support for updating the TDX module
after boot, just like CPU microcode. TDX users really want this
because it lets them do security updates without tearing things down
and rebooting.
- Add TDX module update support
- Make kexec and TDX finally place nice together
- Put TDX error codes into a single header"
* tag 'x86_tdx_for_7.2-rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip: (30 commits)
x86/virt/tdx: Document TDX module update
x86/virt/tdx: Enable TDX module runtime updates
x86/virt/tdx: Refresh TDX module version after update
coco/tdx-host: Lock out module updates when reading version
x86/virt/seamldr: Add module update locking
x86/virt/tdx: Restore TDX module state
x86/virt/seamldr: Initialize the newly-installed TDX module
x86/virt/seamldr: Install a new TDX module
x86/virt/tdx: Reset software states during TDX module shutdown
x86/virt/seamldr: Shut down the current TDX module
x86/virt/seamldr: Abort updates after a failed step
x86/virt/seamldr: Introduce skeleton for TDX module updates
x86/virt/seamldr: Allocate and populate a module update request
coco/tdx-host: Implement firmware upload sysfs ABI for TDX module updates
coco/tdx-host: Don't expose P-SEAMLDR information on CPUs with erratum
coco/tdx-host: Expose P-SEAMLDR information via sysfs
x86/virt/seamldr: Add a helper to retrieve P-SEAMLDR information
x86/virt/seamldr: Introduce a wrapper for P-SEAMLDR SEAMCALLs
coco/tdx-host: Expose TDX module version
coco/tdx-host: Introduce a "tdx_host" device
...
Pull x86 cpuid updates from Ingo Molnar:
- CPUID API updates (Ahmed S. Darwish):
- Introduce a centralized CPUID parser
- Introduce a centralized CPUID data model
- Introduce <asm/cpuid/leaf_types.h>
- Rename cpuid_leaf()/cpuid_subleaf() APIs
- treewide: Explicitly include the x86 CPUID headers
- Update to x86-cpuid-db v3.1 (Maciej Wieczor-Retman)
- Continued removal of pre-i586 support and related simplifications
(Ingo Molnar)
- Add Intel CPU model number for rugged Panther Lake (Tony Luck)
- Misc fixes, updates and cleanups by Arnd Bergmann, Chao Gao, Lukas
Bulwahn, Sohil Mehta, Maciej Wieczor-Retman.
* tag 'x86-cpu-2026-06-14' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip: (25 commits)
x86/cpu: Make CONFIG_X86_CX8 unconditional
x86/cpu: Remove unused !CONFIG_X86_TSC code
x86/cpuid: Update bitfields to x86-cpuid-db v3.1
tools/x86/kcpuid: Update bitfields to x86-cpuid-db v3.1
x86/cpu: Make CONFIG_X86_TSC unconditional
MAINTAINERS: Drop obsolete FPU EMULATOR section
x86/cpu: Fix a F00F bug warning and clean up surrounding code
x86/cpu: Add Intel CPU model number for rugged Panther Lake
x86/cpuid: Introduce a centralized CPUID parser
x86/cpu: Introduce a centralized CPUID data model
x86/cpuid: Introduce <asm/cpuid/leaf_types.h>
x86/cpuid: Rename cpuid_leaf()/cpuid_subleaf() APIs
x86/cpu: Do not include the CPUID API header in asm/processor.h
Documentation: core-api/cpu_hotplug: Remove stale cpu0_hotplug docs
x86/cpu, cpufreq: Remove AMD ELAN support
x86/fpu: Remove the math-emu/ FPU emulation library
x86/fpu: Remove the 'no387' boot option
x86/fpu: Remove MATH_EMULATION and related glue code
treewide: Explicitly include the x86 CPUID headers
x86/cpu: Remove the CONFIG_X86_INVD_BUG quirk
...
The TDX module version is currently stashed in some global variables
and dumped out to sysfs without locking. This works fine when the
version is static and never changes.
But with runtime module updates, the TDX module version can change.
Some kind of locking is needed. Barring this, userspace could
theoretically see a strange torn module version that is some
Frankenstein version from from two different updates.
Use the new module update lock/unlock to prevent updates while
trying to read the version.
Don't be fussy about it. There's no need to snapshot the version or do
READ_ONCE(), or minimize lock holding times. sysfs_emit() does not
sleep. Also note that the lock/unlock are backed by
preempt_dis/enable() which are really cheap CPU-local operations.
This is not a heavyweight lock.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
tl;dr: Select fw_upload for doing TDX module updates. The process of
selecting among available update images is complicated and nuanced. Punt
the selection process out to userspace. One existing userspace
implementation today is the script in the Intel TDX Module Binaries
repository[1].
Long Version:
The kernel supports two primary firmware update mechanisms:
1. request_firmware() - used by microcode, SEV firmware, hundreds of
other drivers
2. 'struct fw_upload' - used by CXL, FPGA updates, dozens of others
The key difference between is that request_firmware() loads a named file
from the filesystem where the filename is kernel-controlled, while
fw_upload accepts firmware data directly from userspace.
TDX module firmware update selection policy is too complex for the kernel.
Leave it to userspace and use fw_upload.
Add a skeleton fw_upload implementation to be fleshed out in subsequent
patches.
Refactor the sysfs visiblity attribute function so it can be used as a
more generic flag for the presence of viable runtime update support.
Why fw_upload instead of request_firmware()?
============================================
Selecting a TDX module update image is not a simple "load the latest"
decision. Userspace needs to choose an image that is compatible with both
the platform and the currently running module.
Some constraints are hard requirements:
a. Module version series are platform-specific. For example, the 1.5.x
series runs on Sapphire Rapids but not Granite Rapids, which needs
2.0.x.
b. Updates are also constrained by version distance. A 1.5.6 module
might permit updates to 1.5.7 but not to 1.5.50.
There may also be userspace policy choices:
c. Decide the update direction: upgrade or downgrade
d. Choose whether to optimize for fewer updates or smaller version
steps, for example, 1.2.3=>1.2.5 versus 1.2.3=>1.2.4=>1.2.5.
Given that complexity, leave module selection to userspace and use
fw_upload.
1. https://github.com/intel/confidential-computing.tdx.tdx-module.binaries/blob/main/version_select_and_load.py
[ dhansen: add version script link, add more explanation of code moves,
fix some minor whitespace issues ]
Signed-off-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Tony Lindgren <tony.lindgren@linux.intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Kiryl Shutsemau (Meta) <kas@kernel.org>
Link: https://lore.kernel.org/kvm/01fc8946-eb84-46fa-9458-f345dd3f6033@intel.com/
Link: https://patch.msgid.link/20260520133909.409394-13-chao.gao@intel.com
TDX-capable CPUs clobber the current VMCS on P-SEAMLDR calls. Clearing
the current VMCS behind KVM's back breaks KVM.
Future CPUs will fix this by preserving the current VMCS across
P-SEAMLDR calls. A future specification update will describe the
VMCS-clearing behavior as an erratum and to state that it does not
occur when IA32_VMX_BASIC[60] is set.
Add a CPU bug bit and refuse to expose P-SEAMLDR information on
affected CPUs.
Use a CPU bug bit to stay consistent with X86_BUG_TDX_PW_MCE. As a
bonus, the bug bit is visible to userspace, which allows userspace to
determine why these sysfs files are not exposed, and it can also be
checked by other kernel components in the future if needed.
== Alternatives ==
Two workarounds were considered but both were rejected:
1. Save/restore the current VMCS around P-SEAMLDR calls. This produces ugly
assembly code [1] and doesn't play well with #MCE or #NMI if they
need to use the current VMCS.
2. Move KVM's VMCS tracking logic to the TDX core code, which would break
the boundary between KVM and the TDX core code [2].
[ dhansen: comment and changelog munging. Add seamldr_call() bug check. ]
Signed-off-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Kiryl Shutsemau (Meta) <kas@kernel.org>
Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/kvm/fedb3192-e68c-423c-93b2-a4dc2f964148@intel.com/ # [1]
Link: https://lore.kernel.org/kvm/aYIXFmT-676oN6j0@google.com/ # [2]
Link: https://patch.msgid.link/20260520133909.409394-12-chao.gao@intel.com
TDX module updates require userspace to select the appropriate module
to load. Expose necessary information to facilitate this decision. Two
values are needed:
- P-SEAMLDR version: for compatibility checks between TDX module and
P-SEAMLDR
- num_remaining_updates: indicates how many updates can be performed
Expose them as tdx-host device attributes visible only when updates
are supported.
Note that the underlying P-SEAMLDR attributes are available regardless
of update support; this only restricts their visibility to userspace.
Signed-off-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Kiryl Shutsemau (Meta) <kas@kernel.org>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://patch.msgid.link/20260520133909.409394-11-chao.gao@intel.com
For TDX module updates, userspace needs to select compatible update
versions based on the current module version.
For example, the 1.5.x series runs on Sapphire Rapids but not Granite
Rapids, which needs 2.0.x. Updates are also constrained by version
distance, so a 1.5.6 module might permit updates to 1.5.7 but not to
1.5.20.
Start the process of punting the version selection logic to userspace.
Expose the TDX module version in the new faux device.
Define TDX_VERSION_FMT macro for the TDX version format since it will be
used multiple times. Also convert an existing print statement to use it.
== Background ==
For posterity, here's what other firmware mechanisms do:
1. AMD SEV leverages an existing PCI device for the PSP to expose
metadata. TDX uses a faux device as it doesn't have PCI device
in its architecture.
2. Microcode uses per-CPU virtual devices to report microcode revisions
because CPUs can have different revisions. But, there is only a
single TDX module, so exposing the TDX module version through a global
TDX faux device is appropriate
3. ARM's CCA implementation isn't in-tree yet, but will likely follow a
similar faux device approach, though it's unclear whether they need
to expose firmware version information
[ dhansen: trim changelog ]
Signed-off-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Tony Lindgren <tony.lindgren@linux.intel.com>
Reviewed-by: Xu Yilun <yilun.xu@linux.intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Kiryl Shutsemau (Meta) <kas@kernel.org>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/2025073035-bulginess-rematch-b92e@gregkh/ # [1]
Link: https://patch.msgid.link/20260520133909.409394-8-chao.gao@intel.com
TDX depends on a platform firmware module that runs on the CPU.
Unlike other CoCo architectures, TDX has no hardware "device"
running the show, just a blob on the CPU.
Create a virtual device to anchor interactions with this platform
firmware. This lets later code:
- expose metadata: TDX module version, seamldr version, to userspace
as device attributes
- implement firmware uploader APIs (which are tied to a device) to
support TDX module runtime updates
Use a faux device because the TDX module is singular within the system
and has no platform resources. Using a faux device eliminates the need
to create a stub bus.
The call to tdx_get_sysinfo() ensures that the TDX module is ready to
provide services.
Note that AMD has a PCI device for the PSP for SEV and ARM CCA will
likely have a faux device [1].
Thanks to Dan and Yilun for all the help on this one.
[ dhansen: trim changelog ]
Signed-off-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Tony Lindgren <tony.lindgren@linux.intel.com>
Reviewed-by: Xu Yilun <yilun.xu@linux.intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Kiryl Shutsemau (Meta) <kas@kernel.org>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/all/2025073035-bulginess-rematch-b92e@gregkh/ # [1]
Link: https://patch.msgid.link/20260520133909.409394-7-chao.gao@intel.com
acrn_irqfd_deassign() and the eventfd EPOLLHUP wakeup can race and free
the same struct hsm_irqfd:
CPU0 CPU1
---- ----
eventfd_release()
wake_up_poll(EPOLLHUP)
hsm_irqfd_wakeup()
queue_work(&irqfd->shutdown)
acrn_irqfd_deassign()
hsm_irqfd_shutdown()
list_del_init()
eventfd_ctx_remove_wait_queue()
eventfd_ctx_put()
kfree(irqfd)
hsm_irqfd_shutdown_work()
container_of(work, ..., shutdown)
irqfd->vm <-- use-after-free
The deassign path freed the irqfd while a shutdown work item was
already queued by EPOLLHUP (or vice versa), so the work item could
resurrect a dangling pointer through container_of().
Switch to the lifetime model used by KVM irqfds:
- Deassign/deinit only deactivate the irqfd: remove it from vm->irqfds
under irqfds_lock and queue the cleanup work.
- hsm_irqfd_shutdown_work() becomes the sole owner that unhooks the
eventfd waitqueue entry, drops the eventfd reference and frees the
irqfd.
- A new HSM_IRQFD_FLAG_SHUTDOWN bit guarded by test_and_set_bit()
ensures the cleanup work is queued at most once, no matter how many
of {EPOLLHUP, deassign, deinit} fire concurrently. This is safe to
call from the waitqueue callback, which runs with wqh->lock held and
IRQs disabled and therefore cannot take irqfds_lock.
- acrn_irqfd_deassign() flushes vm->irqfd_wq before returning so the
eventfd is fully detached on return. acrn_irqfd_deinit() deactivates
every irqfd, flushes the workqueue and only then destroys it, so no
path can queue_work() onto a torn-down workqueue.
- acrn_irqfd_assign() now installs the eventfd waitqueue entry and
publishes the irqfd to vm->irqfds under irqfds_lock, so the irqfd is
never visible to deassign/deinit before its waitqueue entry is in
place, and any EPOLLHUP that fires in the assign window queues
cleanup work that blocks on irqfds_lock until publication is done.
Signed-off-by: Sicong Huang <congei42@163.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Link: https://patch.msgid.link/20260519112018.2135000-2-congei42@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When set_memory_{encrypted,decrypted}() fail, the user cannot know at which
point the function failed, meaning that the pages are left in an unknown state
from the point of view of the caller.
Since the pages may be left in an unencrypted state, they are not suitable for
general use, and cannot be returned safely to the buddy allocator. Avoid the
issue by never freeing the pages, and then do the proper accounting by calling
snp_leak_pages().
Fixes: 3e385c0d6c ("virt: sev-guest: Move SNP Guest Request data pages handling under snp_cmd_mutex")
Signed-off-by: Carlos López <clopez@suse.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@kernel.org
When issuing an extended guest request (SVM_VMGEXIT_EXT_GUEST_REQUEST),
get_ext_report() allocates a buffer to retrieve a certificate blob from the
host, keeping track of its size in report_req->certs_len.
However, the host may return SNP_GUEST_VMM_ERR_INVALID_LEN, indicating
an invalid buffer size, as well as the expected length of such buffer.
get_ext_report() subsequently updates report_req->certs_len with the
host-controlled value, and cleans up the buffer by computing a page order
from such value. This is incorrect, as the host-provided length may not
match the page order of the original allocation, potentially resulting
in corruption in the page allocator.
Fix this by using alloc_pages_exact() instead, and reusing @npages to
compute the size passed to free_pages_exact(). For consistency, also
use @npages to compute the size when allocating the pages, even though
this last change has no functional effect.
Fixes: 3e385c0d6c ("virt: sev-guest: Move SNP Guest Request data pages handling under snp_cmd_mutex")
Signed-off-by: Carlos López <clopez@suse.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Michael Roth <michael.roth@amd.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue flag in:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
The refactoring is going to alter the default behavior of
alloc_workqueue() to be unbound by default.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU. For more details see the Link tag below.
In order to keep alloc_workqueue() behavior identical, explicitly request
WQ_PERCPU.
Cc: Fei Li <fei1.li@intel.com>
Link: https://lore.kernel.org/all/20250221112003.1dSuoGyc@linutronix.de/
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Modify all CPUID call sites which implicitly include any of the CPUID
headers to explicitly include them instead.
For KVM's reverse_cpuid.h, just include <asm/cpuid/types.h> since it
references the CPUID_EAX..EDX symbols without using the CPUID APIs.
Note, this allows removing the inclusion of <asm/cpuid/api.h> from within
<asm/processor.h> next. That allows the CPUID API headers to include
<asm/processor.h> without introducing a circular dependency.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20260327021645.555257-1-darwi@linutronix.de
Pull PCIe TSP update from Dan Williams:
"A small update for the TSM core. It is arguably a fix and coming in
late as I have been offline the past few weeks:
- Drop class_create() for the 'tsm' class"
* tag 'tsm-for-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/devsec/tsm:
virt: coco: change tsm_class to a const struct
Pull more arm64 updates from Catalin Marinas:
"The main 'feature' is a workaround for C1-Pro erratum 4193714
requiring IPIs during TLB maintenance if a process is running in user
space with SME enabled.
The hardware acknowledges the DVMSync messages before completing
in-flight SME accesses, with security implications. The workaround
makes use of the mm_cpumask() to track the cores that need
interrupting (arm64 hasn't used this mask before).
The rest are fixes for MPAM, CCA and generated header that turned up
during the merging window or shortly before.
Summary:
Core features:
- Add workaround for C1-Pro erratum 4193714 - early CME (SME unit)
DVMSync acknowledgement. The fix consists of sending IPIs on TLB
maintenance to those CPUs running in user space with SME enabled
- Include kernel-hwcap.h in list of generated files (missed in a
recent commit generating the KERNEL_HWCAP_* macros)
CCA:
- Fix RSI_INCOMPLETE error check in arm-cca-guest
MPAM:
- Fix an unmount->remount problem with the CDP emulation,
uninitialised variable and checker warnings"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm_mpam: resctrl: Make resctrl_mon_ctx_waiters static
arm_mpam: resctrl: Fix the check for no monitor components found
arm_mpam: resctrl: Fix MBA CDP alloc_capable handling on unmount
virt: arm-cca-guest: fix error check for RSI_INCOMPLETE
arm64/hwcap: Include kernel-hwcap.h in list of generated files
arm64: errata: Work around early CME DVMSync acknowledgement
arm64: cputype: Add C1-Pro definitions
arm64: tlb: Pass the corresponding mm to __tlbi_sync_s1ish()
arm64: tlb: Introduce __tlbi_sync_s1ish_{kernel,batch}() for TLB maintenance
Pull kvm updates from Paolo Bonzini:
"Arm:
- Add support for tracing in the standalone EL2 hypervisor code,
which should help both debugging and performance analysis. This
uses the new infrastructure for 'remote' trace buffers that can be
exposed by non-kernel entities such as firmware, and which came
through the tracing tree
- Add support for GICv5 Per Processor Interrupts (PPIs), as the
starting point for supporting the new GIC architecture in KVM
- Finally add support for pKVM protected guests, where pages are
unmapped from the host as they are faulted into the guest and can
be shared back from the guest using pKVM hypercalls. Protected
guests are created using a new machine type identifier. As the
elusive guestmem has not yet delivered on its promises, anonymous
memory is also supported
This is only a first step towards full isolation from the host; for
example, the CPU register state and DMA accesses are not yet
isolated. Because this does not really yet bring fully what it
promises, it is hidden behind CONFIG_ARM_PKVM_GUEST +
'kvm-arm.mode=protected', and also triggers TAINT_USER when a VM is
created. Caveat emptor
- Rework the dreaded user_mem_abort() function to make it more
maintainable, reducing the amount of state being exposed to the
various helpers and rendering a substantial amount of state
immutable
- Expand the Stage-2 page table dumper to support NV shadow page
tables on a per-VM basis
- Tidy up the pKVM PSCI proxy code to be slightly less hard to
follow
- Fix both SPE and TRBE in non-VHE configurations so that they do not
generate spurious, out of context table walks that ultimately lead
to very bad HW lockups
- A small set of patches fixing the Stage-2 MMU freeing in error
cases
- Tighten-up accepted SMC immediate value to be only #0 for host
SMCCC calls
- The usual cleanups and other selftest churn
LoongArch:
- Use CSR_CRMD_PLV for kvm_arch_vcpu_in_kernel()
- Add DMSINTC irqchip in kernel support
RISC-V:
- Fix steal time shared memory alignment checks
- Fix vector context allocation leak
- Fix array out-of-bounds in pmu_ctr_read() and pmu_fw_ctr_read_hi()
- Fix double-free of sdata in kvm_pmu_clear_snapshot_area()
- Fix integer overflow in kvm_pmu_validate_counter_mask()
- Fix shift-out-of-bounds in make_xfence_request()
- Fix lost write protection on huge pages during dirty logging
- Split huge pages during fault handling for dirty logging
- Skip CSR restore if VCPU is reloaded on the same core
- Implement kvm_arch_has_default_irqchip() for KVM selftests
- Factored-out ISA checks into separate sources
- Added hideleg to struct kvm_vcpu_config
- Factored-out VCPU config into separate sources
- Support configuration of per-VM HGATP mode from KVM user space
s390:
- Support for ESA (31-bit) guests inside nested hypervisors
- Remove restriction on memslot alignment, which is not needed
anymore with the new gmap code
- Fix LPSW/E to update the bear (which of course is the breaking
event address register)
x86:
- Shut up various UBSAN warnings on reading module parameter before
they were initialized
- Don't zero-allocate page tables that are used for splitting
hugepages in the TDP MMU, as KVM is guaranteed to set all SPTEs in
the page table and thus write all bytes
- As an optimization, bail early when trying to unsync 4KiB mappings
if the target gfn can just be mapped with a 2MiB hugepage
x86 generic:
- Copy single-chunk MMIO write values into struct kvm_vcpu (more
precisely struct kvm_mmio_fragment) to fix use-after-free stack
bugs where KVM would dereference stack pointer after an exit to
userspace
- Clean up and comment the emulated MMIO code to try to make it
easier to maintain (not necessarily "easy", but "easier")
- Move VMXON+VMXOFF and EFER.SVME toggling out of KVM (not *all* of
VMX and SVM enabling) as it is needed for trusted I/O
- Advertise support for AVX512 Bit Matrix Multiply (BMM) instructions
- Immediately fail the build if a required #define is missing in one
of KVM's headers that is included multiple times
- Reject SET_GUEST_DEBUG with -EBUSY if there's an already injected
exception, mostly to prevent syzkaller from abusing the uAPI to
trigger WARNs, but also because it can help prevent userspace from
unintentionally crashing the VM
- Exempt SMM from CPUID faulting on Intel, as per the spec
- Misc hardening and cleanup changes
x86 (AMD):
- Fix and optimize IRQ window inhibit handling for AVIC; make it
per-vCPU so that KVM doesn't prematurely re-enable AVIC if multiple
vCPUs have to-be-injected IRQs
- Clean up and optimize the OSVW handling, avoiding a bug in which
KVM would overwrite state when enabling virtualization on multiple
CPUs in parallel. This should not be a problem because OSVW should
usually be the same for all CPUs
- Drop a WARN in KVM_MEMORY_ENCRYPT_REG_REGION where KVM complains
about a "too large" size based purely on user input
- Clean up and harden the pinning code for KVM_MEMORY_ENCRYPT_REG_REGION
- Disallow synchronizing a VMSA of an already-launched/encrypted
vCPU, as doing so for an SNP guest will crash the host due to an
RMP violation page fault
- Overhaul KVM's APIs for detecting SEV+ guests so that VM-scoped
queries are required to hold kvm->lock, and enforce it by lockdep.
Fix various bugs where sev_guest() was not ensured to be stable for
the whole duration of a function or ioctl
- Convert a pile of kvm->lock SEV code to guard()
- Play nicer with userspace that does not enable
KVM_CAP_EXCEPTION_PAYLOAD, for which KVM needs to set CR2 and DR6
as a response to ioctls such as KVM_GET_VCPU_EVENTS (even if the
payload would end up in EXITINFO2 rather than CR2, for example).
Only set CR2 and DR6 when consumption of the payload is imminent,
but on the other hand force delivery of the payload in all paths
where userspace retrieves CR2 or DR6
- Use vcpu->arch.cr2 when updating vmcb12's CR2 on nested #VMEXIT
instead of vmcb02->save.cr2. The value is out of sync after a
save/restore or after a #PF is injected into L2
- Fix a class of nSVM bugs where some fields written by the CPU are
not synchronized from vmcb02 to cached vmcb12 after VMRUN, and so
are not up-to-date when saved by KVM_GET_NESTED_STATE
- Fix a class of bugs where the ordering between KVM_SET_NESTED_STATE
and KVM_SET_{S}REGS could cause vmcb02 to be incorrectly
initialized after save+restore
- Add a variety of missing nSVM consistency checks
- Fix several bugs where KVM failed to correctly update VMCB fields
on nested #VMEXIT
- Fix several bugs where KVM failed to correctly synthesize #UD or
#GP for SVM-related instructions
- Add support for save+restore of virtualized LBRs (on SVM)
- Refactor various helpers and macros to improve clarity and
(hopefully) make the code easier to maintain
- Aggressively sanitize fields when copying from vmcb12, to guard
against unintentionally allowing L1 to utilize yet-to-be-defined
features
- Fix several bugs where KVM botched rAX legality checks when
emulating SVM instructions. There are remaining issues in that KVM
doesn't handle size prefix overrides for 64-bit guests
- Fail emulation of VMRUN/VMLOAD/VMSAVE if mapping vmcb12 fails
instead of somewhat arbitrarily synthesizing #GP (i.e. don't double
down on AMD's architectural but sketchy behavior of generating #GP
for "unsupported" addresses)
- Cache all used vmcb12 fields to further harden against TOCTOU bugs
x86 (Intel):
- Drop obsolete branch hint prefixes from the VMX instruction macros
- Use ASM_INPUT_RM() in __vmcs_writel() to coerce clang into using a
register input when appropriate
- Code cleanups
guest_memfd:
- Don't mark guest_memfd folios as accessed, as guest_memfd doesn't
support reclaim, the memory is unevictable, and there is no storage
to write back to
LoongArch selftests:
- Add KVM PMU test cases
s390 selftests:
- Enable more memory selftests
x86 selftests:
- Add support for Hygon CPUs in KVM selftests
- Fix a bug in the MSR test where it would get false failures on
AMD/Hygon CPUs with exactly one of RDPID or RDTSCP
- Add an MADV_COLLAPSE testcase for guest_memfd as a regression test
for a bug where the kernel would attempt to collapse guest_memfd
folios against KVM's will"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (373 commits)
KVM: x86: use inlines instead of macros for is_sev_*guest
x86/virt: Treat SVM as unsupported when running as an SEV+ guest
KVM: SEV: Goto an existing error label if charging misc_cg for an ASID fails
KVM: SVM: Move lock-protected allocation of SEV ASID into a separate helper
KVM: SEV: use mutex guard in snp_handle_guest_req()
KVM: SEV: use mutex guard in sev_mem_enc_unregister_region()
KVM: SEV: use mutex guard in sev_mem_enc_ioctl()
KVM: SEV: use mutex guard in snp_launch_update()
KVM: SEV: Assert that kvm->lock is held when querying SEV+ support
KVM: SEV: Document that checking for SEV+ guests when reclaiming memory is "safe"
KVM: SEV: Hide "struct kvm_sev_info" behind CONFIG_KVM_AMD_SEV=y
KVM: SEV: WARN on unhandled VM type when initializing VM
KVM: LoongArch: selftests: Add PMU overflow interrupt test
KVM: LoongArch: selftests: Add basic PMU event counting test
KVM: LoongArch: selftests: Add cpucfg read/write helpers
LoongArch: KVM: Add DMSINTC inject msi to vCPU
LoongArch: KVM: Add DMSINTC device support
LoongArch: KVM: Make vcpu_is_preempted() as a macro rather than function
LoongArch: KVM: Move host CSR_GSTAT save and restore in context switch
LoongArch: KVM: Move host CSR_EENTRY save and restore in context switch
...
Pull x86 TDX updates from Dave Hansen:
"The only real thing of note here is printing the TDX module version.
This is a little silly on its own, but the upcoming TDX module update
code needs the same TDX module call. This shrinks that set a wee bit.
There's also few minor macro cleanups and a tweak to the GetQuote ABI
to make it easier for userspace to detect zero-length (failed) quotes"
* tag 'x86_tdx_for_7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
virt: tdx-guest: Return error for GetQuote failures
KVM/TDX: Rename KVM_SUPPORTED_TD_ATTRS to KVM_SUPPORTED_TDX_TD_ATTRS
x86/tdx: Rename TDX_ATTR_* to TDX_TD_ATTR_*
KVM/TDX: Remove redundant definitions of TDX_TD_ATTR_*
x86/tdx: Fix the typo in TDX_ATTR_MIGRTABLE
x86/virt/tdx: Print TDX module version during init
x86/virt/tdx: Retrieve TDX module version
The RSI interface can return RSI_INCOMPLETE when a report spans
multiple granules. This is an expected condition and should not be
treated as a fatal error.
Currently, arm_cca_report_new() checks for `info.result != RSI_SUCCESS`
and bails out, which incorrectly flags RSI_INCOMPLETE as a failure.
Fix the check to only break out on results other than RSI_SUCCESS or
RSI_INCOMPLETE.
This ensures partial reports are handled correctly and avoids spurious
-ENXIO errors when generating attestation reports.
Fixes: 7999edc484 ("virt: arm-cca-guest: TSM_REPORT support for realms")
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reported-by: Jagdish Gediya <Jagdish.Gediya@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Pull crypto library updates from Eric Biggers:
- Migrate more hash algorithms from the traditional crypto subsystem to
lib/crypto/
Like the algorithms migrated earlier (e.g. SHA-*), this simplifies
the implementations, improves performance, enables further
simplifications in calling code, and solves various other issues:
- AES CBC-based MACs (AES-CMAC, AES-XCBC-MAC, and AES-CBC-MAC)
- Support these algorithms in lib/crypto/ using the AES library
and the existing arm64 assembly code
- Reimplement the traditional crypto API's "cmac(aes)",
"xcbc(aes)", and "cbcmac(aes)" on top of the library
- Convert mac80211 to use the AES-CMAC library. Note: several
other subsystems can use it too and will be converted later
- Drop the broken, nonstandard, and likely unused support for
"xcbc(aes)" with key lengths other than 128 bits
- Enable optimizations by default
- GHASH
- Migrate the standalone GHASH code into lib/crypto/
- Integrate the GHASH code more closely with the very similar
POLYVAL code, and improve the generic GHASH implementation to
resist cache-timing attacks and use much less memory
- Reimplement the AES-GCM library and the "gcm" crypto_aead
template on top of the GHASH library. Remove "ghash" from the
crypto_shash API, as it's no longer needed
- Enable optimizations by default
- SM3
- Migrate the kernel's existing SM3 code into lib/crypto/, and
reimplement the traditional crypto API's "sm3" on top of it
- I don't recommend using SM3, but this cleanup is worthwhile
to organize the code the same way as other algorithms
- Testing improvements:
- Add a KUnit test suite for each of the new library APIs
- Migrate the existing ChaCha20Poly1305 test to KUnit
- Make the KUnit all_tests.config enable all crypto library tests
- Move the test kconfig options to the Runtime Testing menu
- Other updates to arch-optimized crypto code:
- Optimize SHA-256 for Zhaoxin CPUs using the Padlock Hash Engine
- Remove some MD5 implementations that are no longer worth keeping
- Drop big endian and voluntary preemption support from the arm64
code, as those configurations are no longer supported on arm64
- Make jitterentropy and samples/tsm-mr use the crypto library APIs
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (66 commits)
lib/crypto: arm64: Assume a little-endian kernel
arm64: fpsimd: Remove obsolete cond_yield macro
lib/crypto: arm64/sha3: Remove obsolete chunking logic
lib/crypto: arm64/sha512: Remove obsolete chunking logic
lib/crypto: arm64/sha256: Remove obsolete chunking logic
lib/crypto: arm64/sha1: Remove obsolete chunking logic
lib/crypto: arm64/poly1305: Remove obsolete chunking logic
lib/crypto: arm64/gf128hash: Remove obsolete chunking logic
lib/crypto: arm64/chacha: Remove obsolete chunking logic
lib/crypto: arm64/aes: Remove obsolete chunking logic
lib/crypto: Include <crypto/utils.h> instead of <crypto/algapi.h>
lib/crypto: aesgcm: Don't disable IRQs during AES block encryption
lib/crypto: aescfb: Don't disable IRQs during AES block encryption
lib/crypto: tests: Migrate ChaCha20Poly1305 self-test to KUnit
lib/crypto: sparc: Drop optimized MD5 code
lib/crypto: mips: Drop optimized MD5 code
lib: Move crypto library tests to Runtime Testing menu
crypto: sm3 - Remove 'struct sm3_state'
crypto: sm3 - Remove the original "sm3_block_generic()"
crypto: sm3 - Remove sm3_base.h
...
KVM/arm64 updates for 7.1
* New features:
- Add support for tracing in the standalone EL2 hypervisor code,
which should help both debugging and performance analysis.
This comes with a full infrastructure for 'remote' trace buffers
that can be exposed by non-kernel entities such as firmware.
- Add support for GICv5 Per Processor Interrupts (PPIs), as the
starting point for supporting the new GIC architecture in KVM.
- Finally add support for pKVM protected guests, with anonymous
memory being used as a backing store. About time!
* Improvements and bug fixes:
- Rework the dreaded user_mem_abort() function to make it more
maintainable, reducing the amount of state being exposed to
the various helpers and rendering a substantial amount of
state immutable.
- Expand the Stage-2 page table dumper to support NV shadow
page tables on a per-VM basis.
- Tidy up the pKVM PSCI proxy code to be slightly less hard
to follow.
- Fix both SPE and TRBE in non-VHE configurations so that they
do not generate spurious, out of context table walks that
ultimately lead to very bad HW lockups.
- A small set of patches fixing the Stage-2 MMU freeing in error
cases.
- Tighten-up accepted SMC immediate value to be only #0 for host
SMCCC calls.
- The usual cleanups and other selftest churn.
pKVM guests practically rely on CONFIG_DMA_RESTRICTED_POOL=y in order
to establish shared memory regions with the host for virtio buffers.
Make CONFIG_ARM_PKVM_GUEST depend on CONFIG_DMA_RESTRICTED_POOL to avoid
the inevitable segmentation faults experience if you have the former but
not the latter.
Reported-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Link: https://patch.msgid.link/20260330144841.26181-39-will@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Validate host controlled value `quote_buf->out_len` that determines how
many bytes of the quote are copied out to guest userspace. In TDX
environments with remote attestation, quotes are not considered private,
and can be forwarded to an attestation server.
Catch scenarios where the host specifies a response length larger than
the guest's allocation, or otherwise races modifying the response while
the guest consumes it.
This prevents contents beyond the pages allocated for `quote_buf`
(up to TSM_REPORT_OUTBLOB_MAX) from being read out to guest userspace,
and possibly forwarded in attestation requests.
Recall that some deployments want per-container configs-tsm-report
interfaces, so the leak may cross container protection boundaries, not
just local root.
Fixes: f4738f56d1 ("virt: tdx-guest: Add Quote generation support using TSM_REPORTS")
Cc: stable@vger.kernel.org
Signed-off-by: Zubin Mithra <zsm@google.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Kiryl Shutsemau (Meta) <kas@kernel.org>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.
As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
Pull TSM updates from Dan Williams:
"A couple of updates to the maximum buffer sizes supported for the
configfs-tsm-reports interface.
This interface is a common transport that conveys the varied
architecture specific launch attestation reports for confidential VMs.
- Prepare the configfs-tsm-reports interface for passing larger
attestation evidence blobs for "Device Identifier Composition
Engine" (DICE) and Post Quantum Crypto (PQC)
- Update the tdx-guest driver for DICE evidence (larger certificate
chains and the CBOR Web Token schema)"
* tag 'tsm-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/devsec/tsm:
configfs-tsm-report: tdx_guest: Increase Quote buffer size to 128KB
configfs-tsm-report: Increase TSM_REPORT_OUTBLOB_MAX to 16MB
configfs-tsm-report: Document size limits for outblob attributes
Intel platforms are transitioning from traditional SGX-based
attestation toward DICE-based attestation as part of a broader move
toward open and standardized attestation models. DICE enables layered
and extensible attestation, where evidence is accumulated across
multiple boot stages.
With SGX-based attestation, Quote sizes are typically under 8KB, as the
payload consists primarily of Quote data and a small certificate bundle.
Existing TDX guest code sizes the Quote buffer accordingly.
DICE-based attestation produces significantly larger Quotes due to the
inclusion of evidence (certificate chains) from multiple boot layers.
The cumulative Quote size can reach approximately 100KB.
Increase GET_QUOTE_BUF_SIZE to 128KB to ensure sufficient buffer
capacity for DICE-based Quote payloads.
Reviewed-by: Fang Peter <peter.fang@intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://patch.msgid.link/20260211001712.1531955-4-sathyanarayanan.kuppuswamy@linux.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
After commit 3225f52cde ("PCI/TSM: Establish Secure Sessions and Link
Encryption"), there is a Kconfig warning when selecting CONFIG_TSM
without CONFIG_VIRT_DRIVERS:
WARNING: unmet direct dependencies detected for TSM
Depends on [n]: VIRT_DRIVERS [=n]
Selected by [y]:
- PCI_TSM [=y] && PCI [=y]
CONFIG_TSM is defined in drivers/virt/coco/Kconfig but this Kconfig is
only sourced when CONFIG_VIRT_DRIVERS is enabled. Since this symbol is
hidden with no dependencies, it should be available without a symbol
that just enables a menu.
Move the sourcing of drivers/virt/coco/Kconfig outside of
CONFIG_VIRT_DRIVERS and wrap the other source statements in
drivers/virt/coco/Kconfig with CONFIG_VIRT_DRIVERS to ensure users do
not get any additional prompts while ensuring CONFIG_TSM is always
available to select. This complements commit 110c155e8a ("drivers/virt:
Drop VIRT_DRIVERS build dependency"), which addressed the build issue
that this Kconfig warning was pointing out.
Fixes: 3225f52cde ("PCI/TSM: Establish Secure Sessions and Link Encryption")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202511140712.NubhamPy-lkp@intel.com/
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20251203-fix-pci-tsm-select-tsm-warning-v1-1-c3959c1cb110@kernel.org
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The PCIe 7.0 specification, section 11, defines the Trusted Execution
Environment (TEE) Device Interface Security Protocol (TDISP). This
protocol definition builds upon Component Measurement and Authentication
(CMA), and link Integrity and Data Encryption (IDE). It adds support for
assigning devices (PCI physical or virtual function) to a confidential VM
such that the assigned device is enabled to access guest private memory
protected by technologies like Intel TDX, AMD SEV-SNP, RISCV COVE, or ARM
CCA.
The "TSM" (TEE Security Manager) is a concept in the TDISP specification
of an agent that mediates between a "DSM" (Device Security Manager) and
system software in both a VMM and a confidential VM. A VMM uses TSM ABIs
to setup link security and assign devices. A confidential VM uses TSM
ABIs to transition an assigned device into the TDISP "RUN" state and
validate its configuration. From a Linux perspective the TSM abstracts
many of the details of TDISP, IDE, and CMA. Some of those details leak
through at times, but for the most part TDISP is an internal
implementation detail of the TSM.
CONFIG_PCI_TSM adds an "authenticated" attribute and "tsm/" subdirectory
to pci-sysfs. Consider that the TSM driver may itself be a PCI driver.
Userspace can watch for the arrival of a "TSM" device,
/sys/class/tsm/tsm0/uevent KOBJ_CHANGE, to know when the PCI core has
initialized TSM services.
The operations that can be executed against a PCI device are split into
two mutually exclusive operation sets, "Link" and "Security" (struct
pci_tsm_{link,security}_ops). The "Link" operations manage physical link
security properties and communication with the device's Device Security
Manager firmware. These are the host side operations in TDISP. The
"Security" operations coordinate the security state of the assigned
virtual device (TDI). These are the guest side operations in TDISP.
Only "link" (Secure Session and physical Link Encryption) operations are
defined at this stage. There are placeholders for the device security
(Trusted Computing Base entry / exit) operations.
The locking allows for multiple devices to be executing commands
simultaneously, one outstanding command per-device and an rwsem
synchronizes the implementation relative to TSM registration/unregistration
events.
Thanks to Wu Hao for his work on an early draft of this support.
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Samuel Ortiz <sameo@rivosinc.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Alexey Kardashevskiy <aik@amd.com>
Co-developed-by: Xu Yilun <yilun.xu@linux.intel.com>
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Link: https://patch.msgid.link/20251031212902.2256310-5-dan.j.williams@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
A "TSM" is a platform component that provides an API for securely
provisioning resources for a confidential guest (TVM) to consume. The
name originates from the PCI specification for platform agent that
carries out operations for PCIe TDISP (TEE Device Interface Security
Protocol).
Instances of this core device are parented by a device representing the
platform security function like CONFIG_CRYPTO_DEV_CCP or
CONFIG_INTEL_TDX_HOST.
This device interface is a frontend to the aspects of a TSM and TEE I/O
that are cross-architecture common. This includes mechanisms like
enumerating available platform TEE I/O capabilities and provisioning
connections between the platform TSM and device DSMs (Device Security
Manager (TDISP)).
For now this is just the scaffolding for registering a TSM device sysfs
interface.
Cc: Xu Yilun <yilun.xu@linux.intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Co-developed-by: Aneesh Kumar K.V (Arm) <aneesh.kumar@kernel.org>
Signed-off-by: Aneesh Kumar K.V (Arm) <aneesh.kumar@kernel.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alexey Kardashevskiy <aik@amd.com>
Link: https://patch.msgid.link/20251031212902.2256310-2-dan.j.williams@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Pull arm64 updates from Will Deacon:
"There's good stuff across the board, including some nice mm
improvements for CPUs with the 'noabort' BBML2 feature and a clever
patch to allow ptdump to play nicely with block mappings in the
vmalloc area.
Confidential computing:
- Add support for accepting secrets from firmware (e.g. ACPI CCEL)
and mapping them with appropriate attributes.
CPU features:
- Advertise atomic floating-point instructions to userspace
- Extend Spectre workarounds to cover additional Arm CPU variants
- Extend list of CPUs that support break-before-make level 2 and
guarantee not to generate TLB conflict aborts for changes of
mapping granularity (BBML2_NOABORT)
- Add GCS support to our uprobes implementation.
Documentation:
- Remove bogus SME documentation concerning register state when
entering/exiting streaming mode.
Entry code:
- Switch over to the generic IRQ entry code (GENERIC_IRQ_ENTRY)
- Micro-optimise syscall entry path with a compiler branch hint.
Memory management:
- Enable huge mappings in vmalloc space even when kernel page-table
dumping is enabled
- Tidy up the types used in our early MMU setup code
- Rework rodata= for closer parity with the behaviour on x86
- For CPUs implementing BBML2_NOABORT, utilise block mappings in the
linear map even when rodata= applies to virtual aliases
- Don't re-allocate the virtual region between '_text' and '_stext',
as doing so confused tools parsing /proc/vmcore.
Miscellaneous:
- Clean-up Kconfig menuconfig text for architecture features
- Avoid redundant bitmap_empty() during determination of supported
SME vector lengths
- Re-enable warnings when building the 32-bit vDSO object
- Avoid breaking our eggs at the wrong end.
Perf and PMUs:
- Support for v3 of the Hisilicon L3C PMU
- Support for Hisilicon's MN and NoC PMUs
- Support for Fujitsu's Uncore PMU
- Support for SPE's extended event filtering feature
- Preparatory work to enable data source filtering in SPE
- Support for multiple lanes in the DWC PCIe PMU
- Support for i.MX94 in the IMX DDR PMU driver
- MAINTAINERS update (Thank you, Yicong)
- Minor driver fixes (PERF_IDX2OFF() overflow, CMN register offsets).
Selftests:
- Add basic LSFE check to the existing hwcaps test
- Support nolibc in GCS tests
- Extend SVE ptrace test to pass unsupported regsets and invalid
vector lengths
- Minor cleanups (typos, cosmetic changes).
System registers:
- Fix ID_PFR1_EL1 definition
- Fix incorrect signedness of some fields in ID_AA64MMFR4_EL1
- Sync TCR_EL1 definition with the latest Arm ARM (L.b)
- Be stricter about the input fed into our AWK sysreg generator
script
- Typo fixes and removal of redundant definitions.
ACPI, EFI and PSCI:
- Decouple Arm's "Software Delegated Exception Interface" (SDEI)
support from the ACPI GHES code so that it can be used by platforms
booted with device-tree
- Remove unnecessary per-CPU tracking of the FPSIMD state across EFI
runtime calls
- Fix a node refcount imbalance in the PSCI device-tree code.
CPU Features:
- Ensure register sanitisation is applied to fields in ID_AA64MMFR4
- Expose AIDR_EL1 to userspace via sysfs, primarily so that KVM
guests can reliably query the underlying CPU types from the VMM
- Re-enabling of SME support (CONFIG_ARM64_SME) as a result of fixes
to our context-switching, signal handling and ptrace code"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (93 commits)
arm64: cpufeature: Remove duplicate asm/mmu.h header
arm64: Kconfig: Make CPU_BIG_ENDIAN depend on BROKEN
perf/dwc_pcie: Fix use of uninitialized variable
arm/syscalls: mark syscall invocation as likely in invoke_syscall
Documentation: hisi-pmu: Add introduction to HiSilicon V3 PMU
Documentation: hisi-pmu: Fix of minor format error
drivers/perf: hisi: Add support for L3C PMU v3
drivers/perf: hisi: Refactor the event configuration of L3C PMU
drivers/perf: hisi: Extend the field of tt_core
drivers/perf: hisi: Extract the event filter check of L3C PMU
drivers/perf: hisi: Simplify the probe process of each L3C PMU version
drivers/perf: hisi: Export hisi_uncore_pmu_isr()
drivers/perf: hisi: Relax the event ID check in the framework
perf: Fujitsu: Add the Uncore PMU driver
arm64: map [_text, _stext) virtual address range non-executable+read-only
arm64/sysreg: Update TCR_EL1 register
arm64: Enable vmalloc-huge with ptdump
arm64: cpufeature: add Neoverse-V3AE to BBML2 allow list
arm64: errata: Apply workarounds for Neoverse-V3AE
arm64: cputype: Add Neoverse-V3AE definitions
...
Commit
7ffeb2fc26 ("x86/sev: Document requirement for linear mapping of guest request buffers")
added a check that requires the guest request buffers to be in the linear
mapping. The get_derived_key() function was passing a buffer that was
allocated on the stack, resulting in the call to snp_send_guest_request()
returning an error.
Update the get_derived_key() function to use an allocated buffer instead
of a stack buffer.
Fixes: 7ffeb2fc26 ("x86/sev: Document requirement for linear mapping of guest request buffers")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/9b764ca9fc79199a091aac684c4926e2080ca7a8.1752698495.git.thomas.lendacky@amd.com
Pull x86 SEV updates from Borislav Petkov:
- Map the SNP calling area pages too so that OVMF EFI fw can issue SVSM
calls properly with the goal of implementing EFI variable store in
the SVSM - a component which is trusted by the guest, vs in the
firmware, which is not
- Allow the kernel to handle #VC exceptions from EFI runtime services
properly when running as a SNP guest
- Rework and cleanup the SNP guest request issue glue code a bit
* tag 'x86_sev_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev: Let sev_es_efi_map_ghcbs() map the CA pages too
x86/sev/vc: Fix EFI runtime instruction emulation
x86/sev: Drop unnecessary parameter in snp_issue_guest_request()
x86/sev: Document requirement for linear mapping of guest request buffers
x86/sev: Allocate request in TSC_INFO_REQ on stack
virt: sev-guest: Contain snp_guest_request_ioctl in sev-guest
Pull driver core updates from Danilo Krummrich:
"debugfs:
- Remove unneeded debugfs_file_{get,put}() instances
- Remove last remnants of debugfs_real_fops()
- Allow storing non-const void * in struct debugfs_inode_info::aux
sysfs:
- Switch back to attribute_group::bin_attrs (treewide)
- Switch back to bin_attribute::read()/write() (treewide)
- Constify internal references to 'struct bin_attribute'
Support cache-ids for device-tree systems:
- Add arch hook arch_compact_of_hwid()
- Use arch_compact_of_hwid() to compact MPIDR values on arm64
Rust:
- Device:
- Introduce CoreInternal device context (for bus internal methods)
- Provide generic drvdata accessors for bus devices
- Provide Driver::unbind() callbacks
- Use the infrastructure above for auxiliary, PCI and platform
- Implement Device::as_bound()
- Rename Device::as_ref() to Device::from_raw() (treewide)
- Implement fwnode and device property abstractions
- Implement example usage in the Rust platform sample driver
- Devres:
- Remove the inner reference count (Arc) and use pin-init instead
- Replace Devres::new_foreign_owned() with devres::register()
- Require T to be Send in Devres<T>
- Initialize the data kept inside a Devres last
- Provide an accessor for the Devres associated Device
- Device ID:
- Add support for ACPI device IDs and driver match tables
- Split up generic device ID infrastructure
- Use generic device ID infrastructure in net::phy
- DMA:
- Implement the dma::Device trait
- Add DMA mask accessors to dma::Device
- Implement dma::Device for PCI and platform devices
- Use DMA masks from the DMA sample module
- I/O:
- Implement abstraction for resource regions (struct resource)
- Implement resource-based ioremap() abstractions
- Provide platform device accessors for I/O (remap) requests
- Misc:
- Support fallible PinInit types in Revocable
- Implement Wrapper<T> for Opaque<T>
- Merge pin-init blanket dependencies (for Devres)
Misc:
- Fix OF node leak in auxiliary_device_create()
- Use util macros in device property iterators
- Improve kobject sample code
- Add device_link_test() for testing device link flags
- Fix typo in Documentation/ABI/testing/sysfs-kernel-address_bits
- Hint to prefer container_of_const() over container_of()"
* tag 'driver-core-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (84 commits)
rust: io: fix broken intra-doc links to `platform::Device`
rust: io: fix broken intra-doc link to missing `flags` module
rust: io: mem: enable IoRequest doc-tests
rust: platform: add resource accessors
rust: io: mem: add a generic iomem abstraction
rust: io: add resource abstraction
rust: samples: dma: set DMA mask
rust: platform: implement the `dma::Device` trait
rust: pci: implement the `dma::Device` trait
rust: dma: add DMA addressing capabilities
rust: dma: implement `dma::Device` trait
rust: net::phy Change module_phy_driver macro to use module_device_table macro
rust: net::phy represent DeviceId as transparent wrapper over mdio_device_id
rust: device_id: split out index support into a separate trait
device: rust: rename Device::as_ref() to Device::from_raw()
arm64: cacheinfo: Provide helper to compress MPIDR value into u32
cacheinfo: Add arch hook to compress CPU h/w id into 32 bits for cache-id
cacheinfo: Set cache 'id' based on DT data
container_of: Document container_of() is not to be used in new code
driver core: auxiliary bus: fix OF node leak
...
Pull char / misc / IIO / other driver updates from Greg KH:
"Here is the big set of char/misc/iio and other smaller driver
subsystems for 6.17-rc1. It's a big set this time around, with the
huge majority being in the iio subsystem with new drivers and dts
files being added there.
Highlights include:
- IIO driver updates, additions, and changes making more code const
and cleaning up some init logic
- bus_type constant conversion changes
- misc device test functions added
- rust miscdevice minor fixup
- unused function removals for some drivers
- mei driver updates
- mhi driver updates
- interconnect driver updates
- Android binder updates and test infrastructure added
- small cdx driver updates
- small comedi fixes
- small nvmem driver updates
- small pps driver updates
- some acrn virt driver fixes for printk messages
- other small driver updates
All of these have been in linux-next with no reported issues"
* tag 'char-misc-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (292 commits)
binder: Use seq_buf in binder_alloc kunit tests
binder: Add copyright notice to new kunit files
misc: ti_fpc202: Switch to of_fwnode_handle()
bus: moxtet: Use dev_fwnode()
pc104: move PC104 option to drivers/Kconfig
drivers: virt: acrn: Don't use %pK through printk
comedi: fix race between polling and detaching
interconnect: qcom: Add Milos interconnect provider driver
dt-bindings: interconnect: document the RPMh Network-On-Chip Interconnect in Qualcomm Milos SoC
mei: more prints with client prefix
mei: bus: use cldev in prints
bus: mhi: host: pci_generic: Add Telit FN990B40 modem support
bus: mhi: host: Detect events pointing to unexpected TREs
bus: mhi: host: pci_generic: Add Foxconn T99W696 modem
bus: mhi: host: Use str_true_false() helper
bus: mhi: host: pci_generic: Add support for EM929x and set MRU to 32768 for better performance.
bus: mhi: host: Fix endianness of BHI vector table
bus: mhi: host: pci_generic: Disable runtime PM for QDU100
bus: mhi: host: pci_generic: Fix the modem name of Foxconn T99W640
dt-bindings: interconnect: qcom,msm8998-bwmon: Allow 'nonposted-mmio'
...
In the past %pK was preferable to %p as it would not leak raw pointer
values into the kernel log.
Since commit ad67b74d24 ("printk: hash addresses printed with %p")
the regular %p has been improved to avoid this issue.
Furthermore, restricted pointers ("%pK") were never meant to be used
through printk(). They can still unintentionally leak raw pointers or
acquire sleeping locks in atomic contexts.
Switch to the regular pointer formatting which is safer and
easier to reason about.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Link: https://lore.kernel.org/r/20250718-restricted-pointers-virt-v1-1-12913fceaf52@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
SNP Guest Request uses only exitinfo2 which is a return value from GHCB, has
meaning beyond ioctl and therefore belongs to struct snp_guest_req.
Move exitinfo2 there and remove snp_guest_request_ioctl from the SEV platform
code.
No functional change intended.
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Dionna Glaze <dionnaglaze@google.com>
Link: https://lore.kernel.org/20250611040842.2667262-2-aik@amd.com
