Pull USB/Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver updates for
6.19-rc1. Nothing major here, just lots of tiny updates for most of
the common USB drivers. Included in here are:
- more xhci driver updates and fixes
- Thunderbolt driver cleanups
- usb serial driver updates
- typec driver updates
- USB tracepoint additions
- dwc3 driver updates, including support for Apple hardware
- lots of other smaller driver updates and cleanups
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (161 commits)
usb: gadget: tegra-xudc: Always reinitialize data toggle when clear halt
USB: serial: option: move Telit 0x10c7 composition in the right place
USB: serial: option: add Telit Cinterion FE910C04 new compositions
usb: typec: ucsi: fix use-after-free caused by uec->work
usb: typec: ucsi: fix probe failure in gaokun_ucsi_probe()
usb: dwc3: core: Remove redundant comment in core init
usb: phy: Initialize struct usb_phy list_head
USB: serial: option: add Foxconn T99W760
usb: usb-storage: No additional quirks need to be added to the EL-R12 optical drive.
usb: typec: hd3ss3220: Enable VBUS based on ID pin state
dt-bindings: usb: ti,hd3ss3220: Add support for VBUS based on ID state
usb: typec: anx7411: add WQ_PERCPU to alloc_workqueue users
USB: add WQ_PERCPU to alloc_workqueue users
dt-bindings: usb: dwc3-xilinx: Describe the reset constraint for the versal platform
drivers/usb/storage: use min() instead of min_t()
usb: raw-gadget: cap raw_io transfer length to KMALLOC_MAX_SIZE
usb: ohci-da8xx: remove unused platform data
usb: gadget: functionfs: use dma_buf_unmap_attachment_unlocked() helper
usb: uas: reduce time under spinlock
usb: dwc3: eic7700: Add EIC7700 USB driver
...
NDI devices have been using a latency timer of 1 ms since commit
b760dac290 ("USB: ftdi: support NDI devices"), which also added a
vendor specific module parameter that could be used to override the
default value for these devices.
Module parameters should generally be avoided as they apply to all
devices managed by a driver and vendor specific hacks should be kept out
of mainline.
Drop the module parameter in favour of the generic sysfs interface for
setting the latency timer (e.g. using udev rules) while keeping the
default 1 ms timer for NDI devices.
Note that there seems to be no (correct) public references to the module
parameter and most likely no one is using it.
Cc: Ryan Mann <rmann@ndigital.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
NDI devices remap the 19200 line speed to 1.2 Mbps.
Use the quirk pointer from the match table to enable the quirk instead
of comparing PIDs on every speed change.
Signed-off-by: Johan Hovold <johan@kernel.org>
Clean up the quirk function comments that were using odd formatting and
were referring to a non-existing function.
Signed-off-by: Johan Hovold <johan@kernel.org>
Rewrite the 8u2232c quirk to avoid the manufacturer and product string
comparisons for the second port which will always be bound.
Signed-off-by: Johan Hovold <johan@kernel.org>
Probe of a device should generally be silent unless errors are
encountered.
Stop logging that the JTAG port is ignored when probing devices with
such a reserved port.
This also maintains consistency with devices that match on interface
number to avoid binding to reserved ports.
Note that the message is not even correct for the second port of the ST
Micro Connect Lite.
Signed-off-by: Johan Hovold <johan@kernel.org>
Some FTDI devices have the first port reserved for JTAG and have been
using a dedicated quirk to prevent binding to it.
As can be inferred directly or indirectly from the commit messages,
almost all of these devices are dual port devices which means that the
more recently added macro for matching on interface number can be used
instead (and some such devices do so already).
This avoids probing interfaces that will never be bound and cleans up
the match table somewhat.
Note that the JTAG quirk is kept for quad port devices, which would
otherwise require three match entries.
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
The U-Blox EVK-M101 enumerates as 1546:0506 [1] with four FTDI interfaces:
- EVK-M101 current sensors
- EVK-M101 I2C
- EVK-M101 UART
- EVK-M101 port D
Only the third USB interface is a UART. This change lets ftdi_sio probe
the VID/PID and registers only interface #3 as a TTY, leaving the rest
available for other drivers.
[1]
usb 5-1.3: new high-speed USB device number 11 using xhci_hcd
usb 5-1.3: New USB device found, idVendor=1546, idProduct=0506, bcdDevice= 8.00
usb 5-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1.3: Product: EVK-M101
usb 5-1.3: Manufacturer: u-blox AG
Datasheet: https://content.u-blox.com/sites/default/files/documents/EVK-M10_UserGuide_UBX-21003949.pdf
Signed-off-by: Oleksandr Suvorov <cryosay@gmail.com>
Link: https://lore.kernel.org/20250926060235.3442748-1-cryosay@gmail.com/
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Drop unnecessary initialisation of variables that are always assigned
before being used.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Clean up set_termios() by using a shorter identifier for the control
request value, replacing a ternary operator and adding some missing
braces to make it more readable.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Refactor by adding two control request helpers to make the code more
readable.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Clean up the driver device type checks by moving logical operators to
the previous line and using consistent indentation of continuation
lines.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Clean up the tiocmset() implementation by simplifying the flag check,
dropping some dev_dbg(), logging errors using dev_err() and using a
common control message call for both DTR and RTS to make the existing
logic easier to follow.
Note that the modem control lines are currently only manipulated in this
function, which therefore does not require any locking.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Clean up the tiocmset() implementation by dropping the dtr and rts flags
to make the logic a little easier to follow.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Asserting or deasserting a modem control line using TIOCMBIS or TIOCMBIC
should not deassert any lines that are not in the mask.
Fix this long-standing issue dating back to 2003 when the support for
these ioctls was added with the introduction of the tiocmset() callback.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Asserting or deasserting a modem control line using TIOCMBIS or TIOCMBIC
should not deassert any lines that are not in the mask.
Fix this long-standing regression dating back to 2003 when the
tiocmset() callback was introduced.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Johan writes:
USB serial updates for 6.18-rc1
Here are the USB serial updates for 6.18-rc1 consisting of some new
modem device ids and a trivial cleanup.
Everything has been in linux-next with no reported issues.
* tag 'usb-serial-6.18-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add SIMCom 8230C compositions
USB: serial: oti6858: remove extranenous ; after comment
There is a redundant semicolon after a comment, remove it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
The conversion of all GPIO drivers to using the .set_rv() and
.set_multiple_rv() callbacks from struct gpio_chip (which - unlike their
predecessors - return an integer and allow the controller drivers to
indicate failures to users) is now complete and the legacy ones have
been removed. Rename the new callbacks back to their original names in
one sweeping change.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver changes for
6.17-rc1.
Lots of little things in here, mostly all small cleanups and updates,
no major new features this development cycle. Stuff included in here
is:
- xhci minor tweaks for error handling
- typec minor updates and a driver update
- gadget driver api cleanups
- unused function removals
- unbind memory leak fixes
- a few new device ids added
- a few new devices supported for some drivers
- other minor cleanups and changes
All of these have been in linux-next with no reported issues, with the
leak fixes being in the shortest amount of time, but they are
'obviously correct' :)"
* tag 'usb-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (100 commits)
usb: musb: omap2430: clean up probe error handling
usb: musb: omap2430: fix device leak at unbind
usb: gadget: udc: renesas_usb3: fix device leak at unbind
usb: dwc3: meson-g12a: fix device leaks at unbind
usb: dwc3: imx8mp: fix device leak at unbind
usb: musb: omap2430: enable compile testing
usb: gadget: udc: renesas_usb3: drop unused module alias
usb: xhci: print xhci->xhc_state when queue_command failed
usb: atm: cxacru: Merge cxacru_upload_firmware() into cxacru_heavy_init()
USB: serial: option: add Foxconn T99W709
usb: core: add urb->sgt parameter description
thunderbolt: Fix copy+paste error in match_service_id()
usb: typec: ucsi: Update power_supply on power role change
usb: typec: ucsi: psy: Set current max to 100mA for BC 1.2 and Default
usb: typec: fusb302: cache PD RX state
usb: typec: ucsi: yoga-c630: add DRM dependency
usb: gadget : fix use-after-free in composite_dev_cleanup()
usb: chipidea: imx: Add a missing blank line
usb: gadget: f_uac1: replace scnprintf() with sysfs_emit()
usb: usblp: clean up assignment inside if conditions
...
Johan writes:
USB serial device id for 6.17-rc1
Here's a new modem device id.
This has been in linux-next with no reported issues.
* tag 'usb-serial-6.17-rc1-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add Foxconn T99W709
Johan writes:
USB serial updates for 6.17-rc1
Here are the USB serial updates for 6.17-rc1, including
- switch to new gpiolib interface that can return errors
All have been in linux-next with no reported issues.
* tag 'usb-serial-6.17-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: cp210x: use new GPIO line value setter callbacks
USB: serial: ftdi_sio: use new GPIO line value setter callbacks
NDI (Northern Digital Inc.) is introducing a new product called the
EMGUIDE GEMINI that will use an FTDI chip for USB serial communications.
Add the NDI EMGUIDE GEMINI product ID that uses the NDI Vendor ID
rather than the FTDI Vendor ID, unlike older products.
Signed-off-by: Ryan Mann <rmann@ndigital.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
usb_serial_device_match() takes a const pointer, and then decides to
cast it away into a non-const one, which is not a good thing to do
overall. Fix this up by properly setting the pointers to be const to
preserve that attribute.
Fixes: d69d804845 ("driver core: have match() callback in struct bus_type take a const *")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
The read urb pointer is dereferenced before checking that it is non-NULL
during open(), but no check is needed as the existence of a bulk in
endpoint is verified during attach() since commit ef079936d3 ("USB:
serial: ti_usb_3410_5052: fix NULL-deref at open").
Drop the bogus read urb sanity check.
Signed-off-by: Johan Hovold <johan@kernel.org>
Add serial support for OWON HDS200 series oscilloscopes and likely
many other pieces of OWON test equipment.
OWON HDS200 series devices host two USB endpoints, designed to
facilitate bidirectional SCPI. SCPI is a predominately ASCII text
protocol for test/measurement equipment. Having a serial/tty interface
for these devices lowers the barrier to entry for anyone trying to
write programs to communicate with them.
The following shows the USB descriptor for the OWON HDS272S running
firmware V5.7.1:
Bus 001 Device 068: ID 5345:1234 Owon PDS6062T Oscilloscope
Negotiated speed: Full Speed (12Mbps)
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 [unknown]
bDeviceSubClass 0 [unknown]
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x5345 Owon
idProduct 0x1234 PDS6062T Oscilloscope
bcdDevice 1.00
iManufacturer 1 oscilloscope
iProduct 2 oscilloscope
iSerial 3 oscilloscope
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0029
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 5 Physical Interface Device
bInterfaceSubClass 0 [unknown]
bInterfaceProtocol 0
iInterface 0
** UNRECOGNIZED: 09 21 11 01 00 01 22 5f 00
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 32
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 32
Device Status: 0x0000
(Bus Powered)
OWON appears to be using the same USB Vendor and Product ID for many
of their oscilloscopes. Looking at the discussion about the USB
vendor/product ID, in the link bellow, suggests that this VID/PID is
shared with VDS, SDS, PDS, and now the HDS series oscilloscopes.
Available documentation for these devices seems to indicate that all
use a similar SCPI protocol, some with RS232 options. It is likely that
this same simple serial setup would work correctly for them all.
Link: https://usb-ids.gowdy.us/read/UD/5345/1234
Signed-off-by: Craig Hesling <craig@hesling.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Abacus Electrics makes optical probes for interacting with smart meters
over an optical interface.
At least one version uses an FT232B chip (as detected by ftdi_sio) with
a custom USB PID, which needs to be added to the list to make the device
work in a plug-and-play fashion.
Signed-off-by: Michael Ehrenreich <michideep@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver updates for
6.15-rc1. Included in here are:
- Thunderbolt driver and core api updates for new hardware and
features
- usb-storage const array cleanups
- typec driver updates
- dwc3 driver updates
- xhci driver updates and bugfixes
- small USB documentation updates
- usb cdns3 driver updates
- usb gadget driver updates
- other small driver updates and fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (92 commits)
thunderbolt: Do not add non-active NVM if NVM upgrade is disabled for retimer
thunderbolt: Scan retimers after device router has been enumerated
usb: host: cdns3: forward lost power information to xhci
usb: host: xhci-plat: allow upper layers to signal power loss
usb: xhci: change xhci_resume() parameters to explicit the desired info
usb: cdns3-ti: run HW init at resume() if HW was reset
usb: cdns3-ti: move reg writes to separate function
usb: cdns3: call cdns_power_is_lost() only once in cdns_resume()
usb: cdns3: rename hibernated argument of role->resume() to lost_power
usb: xhci: tegra: rename `runtime` boolean to `is_auto_runtime`
usb: host: xhci-plat: mvebu: use ->quirks instead of ->init_quirk() func
usb: dwc3: Don't use %pK through printk
usb: core: Don't use %pK through printk
usb: gadget: aspeed: Add NULL pointer check in ast_vhub_init_dev()
dt-bindings: usb: qcom,dwc3: Synchronize minItems for interrupts and -names
usb: common: usb-conn-gpio: switch psy_cfg from of_node to fwnode
usb: xhci: Avoid Stop Endpoint retry loop if the endpoint seems Running
usb: xhci: Don't change the status of stalled TDs on failed Stop EP
xhci: Avoid queuing redundant Stop Endpoint command for stalled endpoint
xhci: Handle spurious events on Etron host isoc enpoints
...
