Pull SoC driver updates from Arnd Bergmann:
"There are a few added drivers, but mostly the normal maintenance to
drivers for firmware, memory controller and other soc specific
hardware:
- The NXP QuickEngine gets modern MSI support, which allows some
cleanups to the GICv3 irqchip chip driver
- A new SoC specific driver for the Renesas R-Car MFIS unit is added,
encapsulating support for the on-chip mailbox and hwspinlock
implementations that are not easily separated into individual
drivers
- The Qualcomm SoC drivers add support for additional SoC
implementations, and flexibility around power management for the
serial-engine driver as well as probing the LLCC driver using
custom hardware descriptions inside of the device itself.
- Added support for the Samsung thermal management unit
- A cleanup to the Tegra 'PMC' driver interfaces to remove legacy
APIs and allow multiple PMC instances everywhere.
- Updates to the TI SCI and KNAS drivers to improve suspend/resume
support.
- Minor driver changes for mediatek, xilinx, allwinner, aspeed,
tegra, broadcom, amd, microchip and starfive specific drivers
- Memory controller updates for Tegra and Renesas for additional SoC
types and other improvements.
- Firmware driver updates for Arm FF-A, SMCCC and SCMI interfaces, to
update driver probing, object lifetimes and address minor bugs"
* tag 'soc-drivers-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (189 commits)
Revert "firmware: zynqmp: Add dynamic CSU register discovery and sysfs interface"
Revert "Documentation: ABI: add sysfs interface for ZynqMP CSU registers"
memory: tegra234: drop dead NULL check in tegra234_mc_icc_aggregate()
memory: tegra264: drop redundant tegra264_mc_icc_aggregate()
memory: tegra186-emc: stop borrowing MC aggregate hook for EMC
soc: aspeed: cleanup dead default for ASPEED_SOCINFO
firmware: tegra: bpmp: Add support for multi-socket platforms
firmware: tegra: bpmp: Propagate debugfs errors
soc/tegra: pmc: Add Tegra238 support
soc/tegra: pmc: Restrict power-off handler to Nexus 7
soc/tegra: pmc: Populate powergate debugfs only when needed
soc/tegra: pmc: Move legacy code behind CONFIG_ARM guard
soc/tegra: pmc: Remove unused legacy functions
soc/tegra: pmc: Create PMC context dynamically
firmware: samsung: acpm: remove compile-testing stubs
firmware: samsung: acpm: Add devm_acpm_get_by_phandle helper
firmware: samsung: acpm: Add TMU protocol support
firmware: samsung: acpm: Make acpm_ops const and access via pointer
firmware: samsung: acpm: Drop redundant _ops suffix in acpm_ops members
firmware: samsung: acpm: Annotate rx_data->cmd with __counted_by_ptr
...
AMD-TEE update for 7.2
Store buffer ID in tee_shm->sec_world_id and remove internal tracking
structures to align with other TEE drivers
* tag 'amdtee-for-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee:
tee: amdtee: store buffer ID in tee_shm->sec_world_id
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
QCOMTEE fix for v7.1
Adding a missing va_end in early return qcomtee_object_user_init()
* tag 'qcomtee-fix-for-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee:
tee: qcomtee: add missing va_end in early return qcomtee_object_user_init()
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
OP-TEE fix for v7.1
Prevent possible use after free in supplicant communication.
* tag 'optee-fix-for-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee:
tee: optee: prevent use-after-free when the client exits before the supplicant
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
TEE fixes for v7.1
Fixing:
- params_from_user() cleanup in error path in tee_ioctl_supp_recv()
- possible tee_shm leak in error path in register_shm_helper()
- padding in struct tee_ioctl_object_invoke_arg
* tag 'tee-fixes-for-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee:
tee: fix params_from_user() error path in tee_ioctl_supp_recv
tee: shm: fix shm leak in register_shm_helper()
tee: fix tee_ioctl_object_invoke_arg padding
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
qcomtee_object_user_init() is a variadic function and when the function
return because there's no dispatch callback in QCOMTEE_OBJECT_TYPE_CB
case, there's no va_end to cleanup "ap" object initialized by va_start
and that can cause undefined behavior. So make sure to use va_end before
returning the error code when there's no dispatch callback.
This is reported by Coverity Scan as "Missing varargs init or cleanup".
Fixes: d6e290837e ("tee: add Qualcomm TEE driver")
Signed-off-by: Robertus Diawan Chris <robertusdchris@gmail.com>
Reviewed-by: Amirreza Zarrabi <amirreza.zarrabi@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
params_from_user() may acquire tee_shm references for MEMREF parameters
before failing after partially processing the supplied parameter array.
In tee_ioctl_supp_recv(), those references are currently not released on
that error path.
Fix this by freeing MEMREF references before returning when
params_from_user() fails.
Keep the final cleanup path in tee_ioctl_supp_recv() unchanged since
supp_recv() may consume and replace the supplied parameters, unlike the
other TEE ioctl callback paths.
Signed-off-by: Qihang <q.h.hack.winter@gmail.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
register_shm_helper() allocates shm before calling
iov_iter_npages(). If iov_iter_npages() returns 0, the function
jumps to err_ctx_put and leaks shm.
This can be triggered by TEE_IOC_SHM_REGISTER with
struct tee_ioctl_shm_register_data where length is 0.
Jump to err_free_shm instead.
Fixes: 7bdee41575 ("tee: Use iov_iter to better support shared buffer registration")
Cc: stable@vger.kernel.org
Cc: lvc-project@linuxtesting.org
Signed-off-by: Georgiy Osokin <g.osokin@auroraos.dev>
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Fix kernel-doc issues in optee_private.h and optee_msg.h:
- Add missing documentation for struct members: optee_msg_param_value,
optee_msg_param, optee_msg_arg, optee, and optee_ffa;
- Ensure member descriptions follow the order of declaration;
- Use consistent formatting (lowercase descriptions and ':' after
member names);
- Adjust indentation for better alignment;
This resolves kernel-doc warnings such as missing member descriptions
and incorrect prototype documentation.
No functional changes.
Signed-off-by: Rodrigo Zaiden <rodrigoffzz@gmail.com>
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
On ARM64, shared memory can have MT_NORMAL_TAGGED attribute when using
the Memory Tagging Extension (MTE). The OP-TEE driver needs to
recognize this as normal memory to allow sharing such buffers with the
Secure World.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Drop struct amdtee_shm_data and the per-context shm_list. In
handle_map_shmem() save the returned buf_id in shm->sec_world_id
instead of allocating a list node. Use shm->sec_world_id (with
get_buffer_id() removed) in amdtee_unmap_shmem() and in call.c when
building memref params. Remove shm_list and shm_mutex from
amdtee_context_data.
Aligns amdtee with other TEE drivers (optee, tstee, qcomtee) that use
tee_shm->sec_world_id for the secure-world handle.
Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com>
Reviewed-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Pull SoC driver updates from Arnd Bergmann:
"The driver updates again are all over the place with many minor fixes
going into platform specific code. The most notable changes are:
- Support for Microchip pic64gx system controllers
- Work on cleaning up devicetree bindings for SoC drivers, and
converting them into the new format
- Lots of smaller changes for Qualcomm SoC drivers, including support
for a number of newly supported chips
- reset controller API cleanups and a new driver for Cix Sky1
- Reworks of the Tegra PMC and CBB drivers, along with a change to
how individual Tegra SoCs get selected in Kconfig and BPMP firmware
driver updates including a refresh of the ABI header to match the
version used by firmware
- STM32 updates to the firewall bus driver and support for the debug
bus through OP-TEE
- SCMI firmware driver improvements for reliability, in particular
for dealing with broken firmware interrupts
- Memory driver updates for Tegra, and a patch to remove the unused
Baikal T1 driver"
* tag 'soc-drivers-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (193 commits)
firmware: arm_ffa: Use the correct buffer size during RXTX_MAP
firmware: qcom: scm: Allow QSEECOM on Lenovo IdeaCentre Mini X
clk: spear: fix resource leak in clk_register_vco_pll()
reset: rzv2h-usb2phy: Add support for VBUS mux controller registration
reset: rzv2h-usb2phy: Convert to regmap API
dt-bindings: reset: renesas,rzv2h-usb2phy: Document RZ/G3E USB2PHY reset
dt-bindings: reset: renesas,rzv2h-usb2phy: Add '#mux-state-cells' property
soc: microchip: add mpfs gpio interrupt mux driver
dt-bindings: soc: microchip: document PolarFire SoC's gpio interrupt mux
gpio: mpfs: Add interrupt support
soc: qcom: ubwc: add helpers to get programmable values
soc: qcom: ubwc: add helper to get min_acc length
firmware: qcom: scm: Register gunyah watchdog device
soc: qcom: socinfo: Add SoC ID for SA8650P
dt-bindings: arm: qcom,ids: Add SoC ID for SA8650P
firmware: qcom: scm: Allow QSEECOM on Mahua CRD
soc: qcom: wcnss: simplify allocation of req
soc: qcom: pd-mapper: Add support for Eliza
soc: qcom: aoss: compare against normalized cooling state
soc: qcom: llcc: fix v1 SB syndrome register offset
...
Earlier TEE subsystem assumed to refcount all the memory pages to be
shared with TEE implementation to be refcounted. However, the slab
allocations within the kernel don't allow refcounting kernel pages.
It is rather better to trust the kernel clients to not free pages while
being shared with TEE implementation. Hence, remove refcounting of kernel
pages from register_shm_helper() API.
Fixes: b9c0e49abf ("mm: decline to manipulate the refcount on a slab page")
Reported-by: Marco Felsch <m.felsch@pengutronix.de>
Reported-by: Sven Püschel <s.pueschel@pengutronix.de>
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Co-developed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Tested-by: Sven Püschel <s.pueschel@pengutronix.de>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Commit 70b0d6b0a1 ("tee: optee: Fix supplicant wait loop") made the
client wait as killable so it can be interrupted during shutdown or
after a supplicant crash. This changes the original lifetime expectations:
the client task can now terminate while the supplicant is still processing
its request.
If the client exits first it removes the request from its queue and
kfree()s it, while the request ID remains in supp->idr. A subsequent
lookup on the supplicant path then dereferences freed memory, leading to
a use-after-free.
Serialise access to the request with supp->mutex:
* Hold supp->mutex in optee_supp_recv() and optee_supp_send() while
looking up and touching the request.
* Let optee_supp_thrd_req() notice that the client has terminated and
signal optee_supp_send() accordingly.
With these changes the request cannot be freed while the supplicant still
has a reference, eliminating the race.
Fixes: 70b0d6b0a1 ("tee: optee: Fix supplicant wait loop")
Signed-off-by: Amirreza Zarrabi <amirreza.zarrabi@oss.qualcomm.com>
Tested-by: Ox Yeh <ox.yeh@mediatek.com>
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
TEE sysfs for 6.20
- Add an optional generic sysfs attribute for TEE revision
- Implement revision reporting for OP-TEE using both SMC and FF-A ABIs
* tag 'tee-sysfs-for-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee:
tee: optee: store OS revision for TEE core
tee: add revision sysfs attribute
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
TEE bus callback for 6.20
- Move from generic device_driver to TEE bus-specific callbacks
- Add module_tee_client_driver() and registration helpers to reduce
boilerplate
- Convert several client drivers (TPM, KEYS, firmware, EFI, hwrng,
and RTC)
- Update documentation and fix kernel-doc warnings
* tag 'tee-bus-callback-for-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee:
tpm/tpm_ftpm_tee: Fix kdoc after function renames
tpm/tpm_ftpm_tee: Make use of tee bus methods
tpm/tpm_ftpm_tee: Make use of tee specific driver registration
KEYS: trusted: Make use of tee bus methods
KEYS: trusted: Migrate to use tee specific driver registration function
firmware: tee_bnxt: Make use of tee bus methods
firmware: tee_bnxt: Make use of module_tee_client_driver()
firmware: arm_scmi: Make use of tee bus methods
firmware: arm_scmi: optee: Make use of module_tee_client_driver()
efi: stmm: Make use of tee bus methods
efi: stmm: Make use of module_tee_client_driver()
hwrng: optee - Make use of tee bus methods
hwrng: optee - Make use of module_tee_client_driver()
rtc: optee: Make use of tee bus methods
rtc: optee: Migrate to use tee specific driver registration function
tee: Adapt documentation to cover recent additions
tee: Add probe, remove and shutdown bus callbacks to tee_client_driver
tee: Add some helpers to reduce boilerplate for tee client drivers
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
OP-TEE update for 6.20
- A micro optimization by making a local array static const
- Update OP-TEE mailing list as moderated
- Update an outdated comment for cmd_alloc_suppl()
* tag 'optee-update-for-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee:
optee: make read-only array attr static const
MAINTAINERS: Mark the OP-TEE mailing list moderated
optee: update outdated comment
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Collect OP-TEE OS revision from secure world for both SMC and FF-A
ABIs, store it in the OP-TEE driver, and expose it through the
generic get_tee_revision() callback.
Signed-off-by: Aristo Chen <aristo.chen@canonical.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Add a generic TEE revision sysfs attribute backed by a new
optional get_tee_revision() callback. The revision string is
diagnostic-only and must not be used to infer feature support.
Signed-off-by: Aristo Chen <aristo.chen@canonical.com>
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Initializing automatic __free variables to NULL without need (e.g.
branches with different allocations), followed by actual allocation is
in contrary to explicit coding rules guiding cleanup.h:
"Given that the "__free(...) = NULL" pattern for variables defined at
the top of the function poses this potential interdependency problem the
recommendation is to always define and assign variables in one statement
and not group variable definitions at the top of the function when
__free() is used."
Code does not have a bug, but is less readable and uses discouraged
coding practice, so fix that by moving declaration to the place of
assignment.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Amirreza Zarrabi <amirreza.zarrabi@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Initializing automatic __free variables to NULL without need (e.g.
branches with different allocations), followed by actual allocation is
in contrary to explicit coding rules guiding cleanup.h:
"Given that the "__free(...) = NULL" pattern for variables defined at
the top of the function poses this potential interdependency problem the
recommendation is to always define and assign variables in one statement
and not group variable definitions at the top of the function when
__free() is used."
Code does not have a bug, but is less readable and uses discouraged
coding practice, so fix that by moving declaration to the place of
assignment.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Amirreza Zarrabi <amirreza.zarrabi@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Initializing automatic __free variables to NULL without need (e.g.
branches with different allocations), followed by actual allocation is
in contrary to explicit coding rules guiding cleanup.h:
"Given that the "__free(...) = NULL" pattern for variables defined at
the top of the function poses this potential interdependency problem the
recommendation is to always define and assign variables in one statement
and not group variable definitions at the top of the function when
__free() is used."
Code does not have a bug, but is less readable and uses discouraged
coding practice, so fix that by moving declaration to the place of
assignment.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Amirreza Zarrabi <amirreza.zarrabi@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Introduce a bus specific probe, remove and shutdown function. For now
this only allows to get rid of a cast of the generic device to a
tee_client device in the drivers and changes the remove prototype to
return void---a non-zero return value is ignored anyhow.
The objective is to get rid of users of struct device_driver callbacks
.probe(), .remove() and .shutdown() to eventually remove these. Until
all tee_client drivers are converted this results in a runtime warning
about the drivers needing an update because there is a bus probe
function and a driver probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Similar to platform drivers (and others) create dedicated register and
unregister functions and a macro to simplify modules that only need to
handle driver registration in their init and exit handlers.
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
QCOMTEE fixes2 for v6.18
- initialize result before use in in error path
- fix uninitialized pointers with free attribute
* tag 'qcomtee-fixes2-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee:
tee: qcomtee: initialize result before use in release worker
tee: qcomtee: fix uninitialized pointers with free attribute
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Uninitialized pointers with `__free` attribute can cause undefined
behavior as the memory assigned randomly to the pointer is freed
automatically when the pointer goes out of scope.
qcomtee doesn't have any bugs related to this as of now, but
it is better to initialize and assign pointers with `__free`
attribute in one statement to ensure proper scope-based cleanup
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/aPiG_F5EBQUjZqsl@stanley.mountain/
Signed-off-by: Ally Heev <allyheev@gmail.com>
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
TEE QTEE fixes for v6.18
- Adds ARCH_QCOM dependency for the QTEE driver
- Fixing return values for copy_from_user() failures
- Guarding against potential off by one read
* tag 'tee-qcomtee-fixes-for-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee:
tee: QCOMTEE should depend on ARCH_QCOM
tee: qcom: return -EFAULT instead of -EINVAL if copy_from_user() fails
tee: qcom: prevent potential off by one read
The Qualcomm Trusted Execution Environment (QTEE) is only available on
Qualcomm SoCs. Hence add a dependency on ARCH_QCOM, to prevent asking
the user about this driver when configuring a kernel without Qualcomm
platform support.
Fixes: d6e290837e ("tee: add Qualcomm TEE driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Pull SoC driver updates from Arnd Bergmann:
"Lots of platform specific updates for Qualcomm SoCs, including a new
TEE subsystem driver for the Qualcomm QTEE firmware interface.
Added support for the Apple A11 SoC in drivers that are shared with
the M1/M2 series, among more updates for those.
Smaller platform specific driver updates for Renesas, ASpeed,
Broadcom, Nvidia, Mediatek, Amlogic, TI, Allwinner, and Freescale
SoCs.
Driver updates in the cache controller, memory controller and reset
controller subsystems.
SCMI firmware updates to add more features and improve robustness.
This includes support for having multiple SCMI providers in a single
system.
TEE subsystem support for protected DMA-bufs, allowing hardware to
access memory areas that managed by the kernel but remain inaccessible
from the CPU in EL1/EL0"
* tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (139 commits)
soc/fsl/qbman: Use for_each_online_cpu() instead of for_each_cpu()
soc: fsl: qe: Drop legacy-of-mm-gpiochip.h header from GPIO driver
soc: fsl: qe: Change GPIO driver to a proper platform driver
tee: fix register_shm_helper()
pmdomain: apple: Add "apple,t8103-pmgr-pwrstate"
dt-bindings: spmi: Add Apple A11 and T2 compatible
serial: qcom-geni: Load UART qup Firmware from linux side
spi: geni-qcom: Load spi qup Firmware from linux side
i2c: qcom-geni: Load i2c qup Firmware from linux side
soc: qcom: geni-se: Add support to load QUP SE Firmware via Linux subsystem
soc: qcom: geni-se: Cleanup register defines and update copyright
dt-bindings: qcom: se-common: Add QUP Peripheral-specific properties for I2C, SPI, and SERIAL bus
Documentation: tee: Add Qualcomm TEE driver
tee: qcom: enable TEE_IOC_SHM_ALLOC ioctl
tee: qcom: add primordial object
tee: add Qualcomm TEE driver
tee: increase TEE_MAX_ARG_SIZE to 4096
tee: add TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF
tee: add TEE_IOCTL_PARAM_ATTR_TYPE_UBUF
tee: add close_context to TEE driver operation
...
TEE fix2 for v6.17
Fixing incorrect error handling for a call to iov_iter_extract_pages().
* tag 'tee-shm-register-fix-for-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee:
tee: fix register_shm_helper()
Link: https://lore.kernel.org/r/20250924083404.GA3747732@rayden
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add Qualcomm TEE driver (QTEE)
This introduces a Trusted Execution Environment (TEE) driver for
Qualcomm TEE (QTEE).
QTEE enables Trusted Applications (TAs) and services to run securely. It
uses an object-based interface, where each service is an object with
sets of operations.
Kernel and userspace services are also available to QTEE through a
similar approach. QTEE makes callback requests that are converted into
object invocations. These objects can represent services within the
kernel or userspace process.
We extend the TEE subsystem to understand object parameters and an ioctl
call so client can invoke objects in QTEE:
- TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF_*
- TEE_IOC_OBJECT_INVOKE
The existing ioctl calls TEE_IOC_SUPPL_RECV and TEE_IOC_SUPPL_SEND are
used for invoking services in the userspace process by QTEE.
The TEE backend driver uses the QTEE Transport Message to communicate
with QTEE. Interactions through the object INVOKE interface are
translated into QTEE messages. Likewise, object invocations from QTEE
for userspace objects are converted into SEND/RECV ioctl calls to
supplicants.
* tag 'tee-qcomtee-for-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee:
Documentation: tee: Add Qualcomm TEE driver
tee: qcom: enable TEE_IOC_SHM_ALLOC ioctl
tee: qcom: add primordial object
tee: add Qualcomm TEE driver
tee: increase TEE_MAX_ARG_SIZE to 4096
tee: add TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF
tee: add TEE_IOCTL_PARAM_ATTR_TYPE_UBUF
tee: add close_context to TEE driver operation
tee: allow a driver to allocate a tee_device without a pool
Link: https://lore.kernel.org/r/20250915174957.GA2040478@rayden
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Re-order these checks to check if "i" is a valid array index before using
it. This prevents a potential off by one read access.
Fixes: d6e290837e ("tee: add Qualcomm TEE driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Enable userspace to allocate shared memory with QTEE. Since
QTEE handles shared memory as object, a wrapper is implemented
to represent tee_shm as an object. The shared memory identifier,
obtained through TEE_IOC_SHM_ALLOC, is transferred to the driver using
TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF_INPUT/OUTPUT.
Tested-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Tested-by: Harshal Dev <quic_hdev@quicinc.com>
Signed-off-by: Amirreza Zarrabi <amirreza.zarrabi@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Introduce qcomtee_object, which represents an object in both QTEE and
the kernel. QTEE clients can invoke an instance of qcomtee_object to
access QTEE services. If this invocation produces a new object in QTEE,
an instance of qcomtee_object will be returned.
Similarly, QTEE can request services from by issuing a callback
request, which invokes an instance of qcomtee_object.
Implement initial support for exporting qcomtee_object to userspace
and QTEE, enabling the invocation of objects hosted in QTEE and userspace
through the TEE subsystem.
Tested-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Harshal Dev <quic_hdev@quicinc.com>
Acked-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Amirreza Zarrabi <amirreza.zarrabi@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
The TEE subsystem allows session-based access to trusted services,
requiring a session to be established to receive a service. This
is not suitable for an environment that represents services as objects.
An object supports various operations that a client can invoke,
potentially generating a result or a new object that can be invoked
independently of the original object.
Add TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF_INPUT/OUTPUT/INOUT to represent an
object. Objects may reside in either TEE or userspace. To invoke an
object in TEE, introduce a new ioctl. Use the existing SUPPL_RECV and
SUPPL_SEND to invoke an object in userspace.
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Harshal Dev <quic_hdev@quicinc.com>
Signed-off-by: Amirreza Zarrabi <amirreza.zarrabi@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
For drivers that can transfer data to the TEE without using shared
memory from client, it is necessary to receive the user address
directly, bypassing any processing by the TEE subsystem. Introduce
TEE_IOCTL_PARAM_ATTR_TYPE_UBUF_INPUT/OUTPUT/INOUT to represent
userspace buffers.
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Harshal Dev <quic_hdev@quicinc.com>
Signed-off-by: Amirreza Zarrabi <amirreza.zarrabi@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
