Adds lwmi_is_attr_01_supported, and only creates the attribute subfolder
if the attribute is supported by the hardware. Due to some poorly
implemented BIOS this is a multi-step sequence of events. This is
because:
- Some BIOS support getting the capability data from custom mode (0xff),
while others only support it in no-mode (0x00).
- Some BIOS support get/set for the current value from custom mode (0xff),
while others only support it in no-mode (0x00).
- Some BIOS report capability data for a method that is not fully
implemented.
- Some BIOS have methods fully implemented, but no complimentary
capability data.
To ensure we only expose fully implemented methods with corresponding
capability data, we check each outcome before reporting that an
attribute can be supported.
Checking for lwmi_is_attr_01_supported during remove is not done to
ensure that we don't attempt to call cd01 or send WMI events if one of
the interfaces being removed was the cause of the driver unloading.
Fixes: edc4b183b7 ("platform/x86: Add Lenovo Other Mode WMI Driver")
Reported-by: Kurt Borja <kuurtb@gmail.com>
Closes: https://lore.kernel.org/platform-driver-x86/DG60P3SHXR8H.3NSEHMZ6J7XRC@gmail.com/
Cc: stable@vger.kernel.org
Reviewed-by: Rong Zhang <i@rong.moe>
Tested-by: Rong Zhang <i@rong.moe>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260510042546.436874-10-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In a later patch in the series the thermal mode enum will be accessed
across three separate drivers (wmi-capdata, wmi-gamezonem and wmi-other).
An additional patch in the series will also add a function prototype that
needs to reference this enum in wmi-helpers.h. To avoid having all these
drivers begin to import each others headers, and to avoid declaring an
opaque enum to hande the second case, move the thermal mode enum to
helpers where it can be safely accessed by everything that needs it from
a single import.
While at it, since the gamezone_events_type enum is the only remaining
item in the header, move that as well and remove the gamezone header
entirely.
Cc: stable@vger.kernel.org
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Rong Zhang <i@rong.moe>
Tested-by: Rong Zhang <i@rong.moe>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260510042546.436874-8-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Currently, lenovo-wmi-gamezone depends on lenovo-wmi-other as the former
imports symbols from the latter. The imported symbols are just used to
register a notifier block. However, there is no runtime dependency
between both drivers, and either of them can run without the other,
which is the major purpose of using the notifier framework.
Such a link-time dependency is non-optimal. A previous attempt to "fix"
it made LENOVO_WMI_GAMEZONE select LENOVO_WMI_TUNING, which was
fundamentally broken and resulted in undefined Kconfig behavior, as
`select' cannot be used on a symbol with potentially unmet dependencies.
Decouple both drivers by moving the thermal mode notifier chain to
lenovo-wmi-helpers. Methods for notifier block (un)registration are
exported for lenovo-wmi-gamezone, while a method for querying the
current thermal mode are exported for lenovo-wmi-other.
This turns the dependency graph from
+------------ lenovo-wmi-gamezone
| |
v |
lenovo-wmi-helpers |
^ |
| V
+------------ lenovo-wmi-other
into
+------------ lenovo-wmi-gamezone
|
v
lenovo-wmi-helpers
^
|
+------------ lenovo-wmi-other
To make it clear, the name of the notifier chain is also renamed from
`om_chain_head' to `tm_chain_head', indicating that it's used to query
the current thermal mode.
No functional change intended.
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Fixes: 6e38b9fcbf ("platform/x86: lenovo: gamezone needs "other mode"")
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202603252259.gHvJDyh3-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202603260302.X0NjQOda-lkp@intel.com/
Signed-off-by: Rong Zhang <i@rong.moe>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260510042546.436874-7-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Currently, the IDA id is only freed on wmi-other device removal or
failure to create firmware-attributes device, kset, or attributes. It
leaks IDA ids if the wmi-other device is bound multiple times, as the
unbind callback never frees the previously allocated IDA id.
Additionally, if the wmi-other device has failed to create a
firmware-attributes device before it gets removed, the wmi-device
removal callback double frees the same IDA id.
These bugs were found by sashiko.dev [1].
Fix them by moving ida_free() into lwmi_om_fw_attr_remove() so it is
balanced with ida_alloc() in lwmi_om_fw_attr_add(). With them fixed,
properly set and utilize the validity of priv->ida_id to balance
firmware-attributes registration and removal, without relying on
propagating the registration error to the component framework, which is
more reliable and aligns with the hwmon device registration and removal
sequences.
No functional change intended.
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Fixes: edc4b183b7 ("platform/x86: Add Lenovo Other Mode WMI Driver")
Cc: stable@vger.kernel.org
Link: https://sashiko.dev/#/patchset/20260331181208.421552-1-derekjohn.clark%40gmail.com [1]
Signed-off-by: Rong Zhang <i@rong.moe>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260510042546.436874-3-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The HP Victus 16-r0xxx (board ID: 8BC2) has the same WMI as other Victus
S boards, but requires quirks for correctly switching thermal profile.
Add the DMI board name to victus_s_thermal_profile_boards[] table and
map it to omen_v1_thermal_params.
Testing on board 8BC2 confirmed that platform profile is registered
successfully and fan RPMs are readable and controllable.
Signed-off-by: Haichen Feng <2806891994@qq.com>
Link: https://patch.msgid.link/tencent_8E29805D8DC7B6005244C3433C62DD9DF606@qq.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
This driver faults when intel vsec driver is unbound from PCI driver
interface. For example:
echo 0000:00:03.1 > /sys/bus/pci/drivers/intel_vsec/unbind
This is caused by accessing plr->dbgfs_dir after vsec_tpmi driver is
removed. Here vsec_tpmi driver is the parent. On unbind, the parent
device remove callback is called first which here will remove debugfs
interface. Hence plr->dbgfs_dir is no longer valid.
Register notifier for TPMI_CORE_EXIT and make this pointer to NULL,
so that debugfs_remove_recursive() is not called with bad plr->dbgfs_dir
pointer.
After notifier is returned the vsec_tpmi driver will call remove debugfs
by calling debugfs_remove_recursive().
Fixes: 811f67c516 ("platform/x86/intel/tpmi: Add new auxiliary driver for performance limits")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Stable@vger.kernel.org
Link: https://patch.msgid.link/20260430151103.1549733-4-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In some cases a driver using services of vsec_tpmi driver requires some
processing before vsec_tpmi exits. For example a children using debugfs
can't use debugfs as this will be deleted by the vsec_tpmi driver.
This is the case when unbind using PCI driver interface. In this case
the remove callback of vsec_tpmi driver is called first, then remove
callback of its children.
Add support of blocking chain notifiers support. Notify on successful probe
and before clean up in the remove callback.
Fixes: 811f67c516 ("platform/x86/intel/tpmi: Add new auxiliary driver for performance limits")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Stable@vger.kernel.org
Link: https://patch.msgid.link/20260430151103.1549733-3-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
On Samsung Galaxy Book 5 (SAM0430), the keyboard backlight, microphone
mute, and camera block hotkeys do not generate i8042 scancodes.
Instead they arrive as ACPI notifications 0x7d, 0x6e, and 0x6f
respectively, all of which previously fell through to the default
"unknown" warning in galaxybook_acpi_notify().
Add handling for these three events:
- 0x7d (Fn+F9, keyboard backlight): schedule the existing
kbd_backlight_hotkey_work which cycles brightness.
- 0x6e (Fn+F10, microphone mute): emit KEY_MICMUTE via the driver's
input device.
- 0x6f (Fn+F11, camera block): if block_recording is active use the
existing block_recording_hotkey_work; otherwise emit a toggle of
SW_CAMERA_LENS_COVER via the driver's input device on models where
the block_recording ACPI feature is not supported.
Tested on Samsung Galaxy Book 5 (SAM0430) and Samsung Galaxy Book2 Pro
(SAM0429).
Signed-off-by: Ayaan Mirza Baig <ayaanmirzabaig85@gmail.com>
Co-developed-by: Joshua Grisham <josh@joshuagrisham.com>
Signed-off-by: Joshua Grisham <josh@joshuagrisham.com>
Link: https://patch.msgid.link/20260418004613.93981-3-ayaanmirzabaig85@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
When the flag relax_fan_constraint is set, local variable 'raw'
is never assigned, and lwmi_om_hwmon_write() will pass uninitialized
value to lwmi_om_fan_get_set() resulting in undefined behavior.
This flag allows user to bypass minimum fan RPM divisor rounding,
but assignment to 'raw' only happens in the non-relaxed path.
Fix by defaulting 'raw' to user provided 'val' in the else branch.
Fixes: 51ed34282f ("platform/x86: lenovo-wmi-other: Add HWMON for fan reporting/tuning")
Reviewed-by: Rong Zhang <i@rong.moe>
Signed-off-by: Yufei CHENG <cd345al@gmail.com>
Link: https://patch.msgid.link/20260426165034.9073-1-cd345al@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The HP Omen Max 16-ah0xxx, DMI board ID 8D41 is currently marked with
victus_s_thermal_params in the victus_s_thermal_profile_boards[] list.
This disables thermal profile readback and adds a dmesg warning during
driver init for "unknown board".
After testing we know that (similar to another HP Omen Max 16 device,
board ID 8D87), the embedded controller on this board does not expose
thermal profile which means we have to intentionally disable EC
readback.
Changing its driver_data to omen_v1_no_ec_thermal_params is sufficient
to silence the warning.
Tested-by: Benjamin Y <hectare.plains1h@icloud.com>
Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com>
Link: https://patch.msgid.link/20260429180953.129885-1-krishna.chomal108@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Pull x86 platform driver updates from Ilpo Järvinen:
"asus-wmi:
- Retain battery charge threshold during boot which avoids
unsolicited change to 100%. Return -ENODATA when the limit
is not yet known
- Improve screenpad power/brightness handling consistency
- Fix screenpad brightness range
barco-p50-gpio:
- Normalize gpio_get return values
bitland-mifs-wmi:
- Add driver for Bitland laptops (supports platform profile,
hwmon, kbd backlight, gpu mode, hotkeys, and fan boost)
dell_rbu:
- Fix using uninitialized value in sysfs write function
dell-wmi-sysman:
- Respect destination length when constructing enum strings
hp-wmi:
- Propagate fan setting apply failures and log an error
- Fix sysfs write vs work handler cancel_delayed_work_sync() deadlock
- Correct keepalive schedule_delayed_work() to mod_delayed_work()
- Fix u8 underflows in GPU delta calculation
- Use mutex to protect fan pwm/mode
- Ignore kbd backlight and FnLock key events that are handled by FW
- Fix fan table parsing (use correct field)
- Add support for Omen 14-fb0xxx, 16-n0xxx, 16-wf1xxx, and
Omen MAX 16-ak0xxxx
input: trackpoint & thinkpad_acpi:
- Enable doubletap by default and add sysfs enable/disable
int3472:
- Add support for GPIO type 0x02 (IR flood LED)
intel-speed-select: (updated to v1.26)
- Avoid using current base frequency as maximum
- Fix CPU extended family ID decoding
- Fix exit code
- Improve error reporting
intel/vsec:
- Refactor to support ACPI-enumerated PMT endpoints.
pcengines-apuv2:
- Attach software node to the gpiochip
uniwill:
- Refactor hwmon to smaller parts to accomodate HW diversity
- Support USB-C power/performance priority switch through sysfs
- Add another XMG Fusion 15 (L19) DMI vendor
- Enable fine-grained features to device lineup mapping
wmi:
- Perform output size check within WMI core to allow simpler WMI
drivers
misc:
- acpi_driver -> platform driver conversions (a large number of
changes from Rafael J. Wysocki)
- cleanups / refactoring / improvements"
* tag 'platform-drivers-x86-v7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (106 commits)
platform/x86: hp-wmi: Add support for Omen 16-wf1xxx (8C77)
platform/x86: hp-wmi: Add support for Omen 16-n0xxx (8A44)
platform/x86: hp-wmi: Add support for OMEN MAX 16-ak0xxx (8D87)
platform/x86: hp-wmi: fix fan table parsing
platform/x86: hp-wmi: add Omen 14-fb0xxx (board 8C58) support
platform/wmi: Replace .no_notify_data with .min_event_size
platform/wmi: Extend wmidev_query_block() to reject undersized data
platform/wmi: Extend wmidev_invoke_method() to reject undersized data
platform/wmi: Prepare to reject undersized unmarshalling results
platform/wmi: Convert drivers to use wmidev_invoke_procedure()
platform/wmi: Add wmidev_invoke_procedure()
platform/x86: int3472: Add support for GPIO type 0x02 (IR flood LED)
platform/x86: int3472: Parameterize LED con_id in registration
platform/x86: int3472: Rename pled to led in LED registration code
platform/x86: int3472: Use local variable for LED struct access
platform/x86: thinkpad_acpi: remove obsolete TODO comment
platform/x86: dell-wmi-sysman: bound enumeration string aggregation
platform/x86: hp-wmi: Ignore backlight and FnLock events
platform/x86: uniwill-laptop: Fix signedness bug
platform/x86: dell_rbu: avoid uninit value usage in packet_size_write()
...
Pull media updates from Mauro Carvalho Chehab:
- new CSI tegra support, covering Tegra20 and Tegra30
- new camera sensor drivers: T4ka3 and ov2732
- m88ds3103: add 3103c chip support
- uvcvideo: add support for Intel RealSense D436/D555 and P010 pixel format
- synopsys csi2rx: add i.MX93 support
- imx8-isi: add i.MX95 support
- imx8mq-mipi-csi2: add i.MX8ULP support
- dw100: add V4L2 requests support
- support for DTV devices from Hauppauge got some improvements
- media staging: dropped starfive-camss driver
- media docs: document multi-committers model and improve maint profile
- media core:
- add v4l2_subdev_get_frame_desc_passthrough() helper
- improve error handling in fwnode parsing
- lots of driver fixes, cleanups and improvements
* tag 'media/v7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (251 commits)
Revert "media: cx231xx: add USB ID 2040:8360 for Hauppauge WinTV-HVR-935"
media: synopsys: csi2rx: add i.MX93 support
media: dt-bindings: add NXP i.MX93 compatible string
media: synopsys: csi2rx: Use enum and u32 array for register offsets
media: synopsys: csi2rx: implement .get_frame_desc() callback
media: synopsys: csi2rx: only check errors from devm_clk_bulk_get_all()
media: synopsys: csi2rx: use devm_reset_control_get_optional_exclusive()
media: i2c: imx283: add support for non-continuous MIPI clock mode
media: i2c: ov08d10: add support for 24 MHz input clock
media: i2c: ov08d10: add support for reset and power management
media: i2c: ov08d10: add support for binding via device tree
dt-bindings: media: i2c: document Omnivision OV08D10 CMOS image sensor
media: i2c: ov08d10: add missing newline to prints
media: i2c: ov08d10: fix some typos in comments
media: i2c: ov08d10: remove duplicate register write
media: i2c: ov08d10: fix image vertical start setting
media: i2c: ov08d10: fix runtime PM handling in probe
staging: media: ipu7: Update TODO
media: Add t4ka3 camera sensor driver
media: i2c: Add ov2732 image sensor driver
...
The HP OMEN MAX 16-ak0xxx (8D87) requires the same WMI queries as other
Victus S devices, hence it has been added to the corresponding list.
For this reason, platform_profile_victus_s_get_ec() will be called
during thermal_profile_setup() and victus_s_powersource_event() to
obtain hardware state (platform profile) by reading from the Embedded
Controller, however, this particular board's EC does not seem to expose
the platform profile value, unlike other boards. Hence EC readback is
disabled.
Testing on board 8D87 confirmed that platform profile is registered
successfully and fan RPMs are readable and controllable.
Tested-by: Jinyang Zhu <Jakie101@proton.me>
Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com>
Link: https://patch.msgid.link/20260410191039.125659-3-krishna.chomal108@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
For Victus S devices, the BIOS fan table header was being incorrectly
parsed as:
struct {
u8 unknown;
u8 num_entries;
}
The first field should be num_fans and the second should be unknown. It
is pure coincidence that interpreting an "unknown" field as "num_entries"
worked on multiple device, however for board 8D87 (in an upcoming patch),
this assumption fails, and the hp-wmi driver fails to load.
We fix this by correcting the header definition and compensating for
num_entries by parsing each entry of the fan table until an all-NULL row
is obtained, mirroring the behavior of OMEN Gaming Hub on Windows.
Fixes: 46be1453e6 ("platform/x86: hp-wmi: add manual fan control for Victus S models")
Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com>
Link: https://patch.msgid.link/20260410191039.125659-2-krishna.chomal108@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Pull ACPI support updates from Rafael Wysocki:
"These include an update of the CMOS RTC driver and the related ACPI
and x86 code that, among other things, switches it over to using the
platform device interface for device binding on x86 instead of the PNP
device driver interface (which allows the code in question to be
simplified quite a bit), a major update of the ACPI Time and Alarm
Device (TAD) driver adding an RTC class device interface to it, and
updates of core ACPI drivers that remove some unnecessary and not
really useful code from them.
Apart from that, two drivers are converted to using the platform
driver interface for device binding instead of the ACPI driver one,
which is slated for removal, support for the Performance Limited
register is added to the ACPI CPPC library and there are some
janitorial updates of it and the related cpufreq CPPC driver, the ACPI
processor driver is fixed and cleaned up, and NVIDIA vendor CPER
record handler is added to the APEI GHES code.
Also, the interface for obtaining a CPU UID from ACPI is consolidated
across architectures and used for fixing a problem with the PCI TPH
Steering Tag on ARM64, there are two updates related to ACPICA, a
minor ACPI OS Services Layer (OSL) update, and a few assorted updates
related to ACPI tables parsing.
Specifics:
- Update maintainers information regarding ACPICA (Rafael Wysocki)
- Replace strncpy() with strscpy_pad() in acpi_ut_safe_strncpy()
(Kees Cook)
- Trigger an ordered system power off after encountering a fatal
error operator in AML (Armin Wolf)
- Enable ACPI FPDT parsing on LoongArch (Xi Ruoyao)
- Remove the temporary stop-gap acpi_pptt_cache_v1_full structure
from the ACPI PPTT parser (Ben Horgan)
- Add support for exposing ACPI FPDT subtables FBPT and S3PT (Nate
DeSimone)
- Address multiple assorted issues and clean up the code in the ACPI
processor idle driver (Huisong Li)
- Replace strlcat() in the ACPI processor idle drive with a better
alternative (Andy Shevchenko)
- Rearrange and clean up acpi_processor_errata_piix4() (Rafael
Wysocki)
- Move reference performance to capabilities and fix an uninitialized
variable in the ACPI CPPC library (Pengjie Zhang)
- Add support for the Performance Limited Register to the ACPI CPPC
library (Sumit Gupta)
- Add cppc_get_perf() API to read performance controls, extend
cppc_set_epp_perf() for FFH/SystemMemory, and make the ACPI CPPC
library warn on missing mandatory DESIRED_PERF register (Sumit
Gupta)
- Modify the cpufreq CPPC driver to update MIN_PERF/MAX_PERF in
target callbacks to allow it to control performance bounds via
standard scaling_min_freq and scaling_max_freq sysfs attributes and
add sysfs documentation for the Performance Limited Register to it
(Sumit Gupta)
- Add ACPI support to the platform device interface in the CMOS RTC
driver, make the ACPI core device enumeration code create a
platform device for the CMOS RTC, and drop CMOS RTC PNP device
support (Rafael Wysocki)
- Consolidate the x86-specific CMOS RTC handling with the ACPI TAD
driver and clean up the CMOS RTC ACPI address space handler (Rafael
Wysocki)
- Enable ACPI alarm in the CMOS RTC driver if advertised in ACPI FADT
and allow that driver to work without a dedicated IRQ if the ACPI
alarm is used (Rafael Wysocki)
- Clean up the ACPI TAD driver in various ways and add an RTC class
device interface, including both the RTC setting/reading and alarm
timer support, to it (Rafael Wysocki)
- Clean up the ACPI AC and ACPI PAD (processor aggregator device)
drivers (Rafael Wysocki)
- Rework checking for duplicate video bus devices and consolidate
pnp.bus_id workarounds handling in the ACPI video bus driver
(Rafael Wysocki)
- Update the ACPI core device drivers to stop setting
acpi_device_name() unnecessarily (Rafael Wysocki)
- Rearrange code using acpi_device_class() in the ACPI core device
drivers and update them to stop setting acpi_device_class()
unnecessarily (Rafael Wysocki)
- Define ACPI_AC_CLASS in one place (Rafael Wysocki)
- Convert the ni903x_wdt watchdog driver and the xen ACPI PAD driver
to bind to platform devices instead of ACPI devices (Rafael
Wysocki)
- Add devm_ghes_register_vendor_record_notifier(), use it in the PCI
hisi driver, and Add NVIDIA vendor CPER record handler (Kai-Heng
Feng)
- Consolidate the interface for obtaining a CPU UID from ACPI across
architectures and use it to address incorrect PCI TPH Steering Tag
on ARM64 resulting from the invalid assumption that the ACPI
Processor UID would always be the same as the corresponding logical
CPU ID in Linux (Chengwen Feng)"
* tag 'acpi-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (73 commits)
ACPICA: Update maintainers information
watchdog: ni903x_wdt: Convert to a platform driver
ACPI: PAD: xen: Convert to a platform driver
ACPI: processor: idle: Reset cpuidle on C-state list changes
cpuidle: Extract and export no-lock variants of cpuidle_unregister_device()
PCI/TPH: Pass ACPI Processor UID to Cache Locality _DSM
ACPI: PPTT: Use acpi_get_cpu_uid() and remove get_acpi_id_for_cpu()
perf: arm_cspmu: Switch to acpi_get_cpu_uid() from get_acpi_id_for_cpu()
ACPI: Centralize acpi_get_cpu_uid() declaration in include/linux/acpi.h
x86/acpi: Add acpi_get_cpu_uid() for unified ACPI CPU UID retrieval
RISC-V: ACPI: Add acpi_get_cpu_uid() for unified ACPI CPU UID retrieval
LoongArch: Add acpi_get_cpu_uid() for unified ACPI CPU UID retrieval
arm64: acpi: Add acpi_get_cpu_uid() for unified ACPI CPU UID retrieval
ACPI: APEI: GHES: Add NVIDIA vendor CPER record handler
PCI: hisi: Use devm_ghes_register_vendor_record_notifier()
ACPI: APEI: GHES: Add devm_ghes_register_vendor_record_notifier()
ACPI: tables: Enable FPDT on LoongArch
ACPI: processor: idle: Fix NULL pointer dereference in hotplug path
ACPI: processor: idle: Reset power_setup_done flag on initialization failure
ACPI: TAD: Add alarm support to the RTC class device interface
...
Board 8C58 (HP Omen Transcend Gaming Laptop 14-fb0xxx) appears to use
the same thermal profile handling as other supported Omen systems,
including board 8E41.
Add it to omen_thermal_profile_boards so hp-wmi can expose the firmware
thermal profiles through the platform_profile interface.
Tested on Omen 14-fb0xxx: the profile handler exposes cool, balanced,
and performance modes, and selecting performance increases sustained CPU
package power under load.
Signed-off-by: Shaun Varghese <shaunvarghese43@gmail.com>
Link: https://patch.msgid.link/20260410174651.1424000-1-shaunvarghese43@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add support for GPIO type 0x02, which controls an IR flood LED used
for face authentication on some laptops (e.g. Dell Pro Max 16 Premium).
Without this patch, the kernel logs "GPIO type 0x02 unknown; the sensor
may not work" and IR sensors paired with a flood LED cannot function.
The flood LED is registered through the LED subsystem like the existing
privacy LED, including a lookup entry to allow future consumer drivers
to find and control it via led_get().
To support multiple LEDs per INT3472 device, convert the single led
struct member to an array with a counter.
Signed-off-by: Marco Nenciarini <mnencia@kcore.it>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Link: https://patch.msgid.link/20260401203638.1601661-5-mnencia@kcore.it
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add a con_id parameter to skl_int3472_register_led() to allow callers
to specify both the LED name suffix and lookup con_id instead of
hardcoding "privacy". This prepares for registering additional LED
types with different names.
While at it, rename the privacy LED's GPIO con_id from "privacy-led"
to "privacy" in int3472_get_con_id_and_polarity() and pass it
directly to skl_int3472_register_led(), reducing churn when adding
new LED types.
No functional change.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Marco Nenciarini <mnencia@kcore.it>
Link: https://patch.msgid.link/20260401203638.1601661-4-mnencia@kcore.it
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Merge ACPI core driver core driver updates and assorted driver updates
related to ACPI support for 7.1-rc1:
- Clean up the ACPI AC and ACPI PAD (processor aggregator device)
drivers (Rafael Wysocki)
- Rework checking for duplicate video bus devices and consolidate
pnp.bus_id workarounds handling in the ACPI video bus driver (Rafael
Wysocki)
- Update the ACPI core device drivers to stop setting acpi_device_name()
unnecessarily (Rafael Wysocki)
- Rearrange code using acpi_device_class() in the ACPI core device
drivers and update them to stop setting acpi_device_class()
unnecessarily (Rafael Wysocki)
- Define ACPI_AC_CLASS in one place (Rafael Wysocki)
- Convert the ni903x_wdt watchdog driver and the xen ACPI PAD driver to
bind to platform devices instead of ACPI devices (Rafael Wysocki)
* acpi-driver:
watchdog: ni903x_wdt: Convert to a platform driver
ACPI: PAD: xen: Convert to a platform driver
ACPI: AC: Define ACPI_AC_CLASS in one place
ACPI: driver: Do not set acpi_device_class() unnecessarily
ACPI: driver: Avoid using pnp.device_class for netlink handling
ACPI: event: Redefine acpi_notifier_call_chain()
ACPI: driver: Do not set acpi_device_name() unnecessarily
ACPI: video: Consolidate pnp.bus_id workarounds handling
ACPI: video: Rework checking for duplicate video bus devices
driver core: auxiliary bus: Introduce dev_is_auxiliary()
ACPI: PAD: Rearrange notify handler installation and removal
ACPI: AC: Get rid of unnecessary declarations
populate_enum_data() aggregates firmware-provided value-modifier
and possible-value strings into fixed 512-byte struct members.
The current code bounds each individual source string but then
appends every string and separator with raw strcat() and no
remaining-space check.
Switch the aggregation loops to a bounded append helper and
reject enumeration packages whose combined strings do not fit
in the destination buffers.
Fixes: e8a60aa740 ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260408084501.1-dell-wmi-sysman-v2-pengpeng@iscas.ac.cn
[ij: add include]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The function sysfs_match_string() can return negative error codes and
the variable assigned to it is the enum 'option'. Which could be an
unsigned int due to different compiler implementations.
Assign signed variable 'ret' to sysfs_match_string(), check for error,
then assign ret to option.
Detected by Smatch:
drivers/platform/x86/uniwill/uniwill-acpi.c:919 usb_c_power_priority_store()
warn: unsigned 'option' is never less than zero.
Fixes: 03ae0a0d09 ("platform/x86: uniwill-laptop: Implement USB-C power priority setting")
Signed-off-by: Ethan Tidmore <ethantidmore06@gmail.com>
Link: https://patch.msgid.link/20260403070928.802196-1-ethantidmore06@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
hp_wmi_hwmon_priv.mode and .pwm are written by hp_wmi_hwmon_write() in
sysfs context and read by hp_wmi_hwmon_keep_alive_handler() in a
workqueue. A concurrent write and keep-alive expiry can observe an
inconsistent mode/pwm pair (e.g. mode=MANUAL with a stale pwm).
Add a mutex to hp_wmi_hwmon_priv protecting mode and pwm. Hold it in
hp_wmi_hwmon_write() across the field update and apply call, and in
hp_wmi_hwmon_keep_alive_handler() before calling apply.
In hp_wmi_hwmon_read(), only the pwm_enable path reads priv->mode; use
scoped_guard() there to avoid holding the lock across unrelated WMI
calls.
Fixes: c203c59fb5 ("platform/x86: hp-wmi: implement fan keep-alive")
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Emre Cecanpunar <emreleno@gmail.com>
Link: https://patch.msgid.link/20260407142515.20683-6-emreleno@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
gpu_delta was declared as u8. If the firmware specifies a GPU RPM
lower than the CPU RPM, subtracting them causes an underflow
(e.g. 10 - 20 = 246), which forces the GPU fan to remain clamped at
U8_MAX (100% speed) during operation.
Change gpu_delta to int and use signed arithmetic. Existing signed logic
in hp_wmi_fan_speed_set() correctly handles negative deltas.
Fixes: 46be1453e6 ("platform/x86: hp-wmi: add manual fan control for Victus S models")
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Emre Cecanpunar <emreleno@gmail.com>
Link: https://patch.msgid.link/20260407142515.20683-5-emreleno@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Currently, schedule_delayed_work() is used to queue the 90s keep-alive
timer. If a user manually changes the fan speed at T=85s,
schedule_delayed_work() leaves the existing timer in place as it is a
no-op if the work is already pending. This results in the keep-alive
timer firing unnecessarily at T=90s, just 5 seconds after the user
action.
Replace schedule_delayed_work() with mod_delayed_work() to reset the
90s timer whenever fan settings are applied. This guarantees a full 90s
delay after every user interaction, preventing redundant keep-alive
executions and improving efficiency.
Fixes: c203c59fb5 ("platform/x86: hp-wmi: implement fan keep-alive")
Signed-off-by: Emre Cecanpunar <emreleno@gmail.com>
Link: https://patch.msgid.link/20260407142515.20683-4-emreleno@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
hp_wmi_apply_fan_settings() uses cancel_delayed_work_sync() to stop
the keep-alive timer in AUTO mode. However, since
hp_wmi_apply_fan_settings() is also called from the keep-alive
handler, a race condition with a sysfs write can cause the handler to
wait on itself, leading to a deadlock.
Replace cancel_delayed_work_sync() with cancel_delayed_work() in
hp_wmi_apply_fan_settings() to avoid the self-flush deadlock.
Fixes: c203c59fb5 ("platform/x86: hp-wmi: implement fan keep-alive")
Signed-off-by: Emre Cecanpunar <emreleno@gmail.com>
Link: https://patch.msgid.link/20260407142515.20683-3-emreleno@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
hp_wmi_get_fan_count_userdefine_trigger() can fail, but its return
value was silently ignored in hp_wmi_apply_fan_settings() for
PWM_MODE_MAX/AUTO. Propagate these errors consistently.
Additionally, handle the return value of hp_wmi_apply_fan_settings()
in its callers by adding appropriate warnings on failure, and remove an
unreachable "return 0" at the end of the function.
Fixes: 46be1453e6 ("platform/x86: hp-wmi: add manual fan control for Victus S models")
Signed-off-by: Emre Cecanpunar <emreleno@gmail.com>
Link: https://patch.msgid.link/20260407142515.20683-2-emreleno@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In calculate_security_buffer(), call strlen() once and use ALIGN() to
round up to an even size.
In populate_security_buffer(), also avoid recomputing strlen(), rename
the u32 pointer from 'seclen' to 'seclenp' to avoid confusion with the
new length variable, and drop the memcpy() guard since calling it with
size 0 is a no-op and therefore safe.
Use 'const char *' for the read-only source string in both helpers.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20260331160310.608857-3-thorsten.blum@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
There is no point in registering an ACPI driver that only has an empty
.add() callback, which is done by the thinkpad_acpi driver, since
after binding to an ACPI device it only sits there and does nothing.
That binding only effectively causes the ACPI device's reference count
to increase, but that can be achieved by using acpi_get_acpi_dev()
instead of acpi_fetch_acpi_dev() in setup_acpi_notify(), and doing
the corresponding cleanup in ibm_exit().
Update the code accordingly and get rid of the non-functional ACPI
driver.
No intentional functional impact beyond altering sysfs content.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://patch.msgid.link/3949487.kQq0lBPeGt@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the Asus wireless ACPI driver to a platform
one.
After this change, the subordinate input and LED devices will be
registered under the platform device used for driver binding instead of
its ACPI companion.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Link: https://lore.kernel.org/all/2396510.ElGaqSPkdT@rafael.j.wysocki/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/13959361.uLZWGnKmhe@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
