Introduce support for EcoNet PCIe PHY controllers found in EN751221
and EN7528 SoCs, these SoCs are not identical but are similar, each
having one Gen1 port, and one Gen1/Gen2 port.
Co-developed-by: Ahmed Naseef <naseefkm@gmail.com>
Signed-off-by: Ahmed Naseef <naseefkm@gmail.com>
[cjd@cjdns.fr: add EN751221 support and refactor for clarity]
Signed-off-by: Caleb James DeLisle <cjd@cjdns.fr>
Link: https://patch.msgid.link/20260425173642.406089-3-cjd@cjdns.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
EyeQ5 embeds a system-controller called OLB. It features many unrelated
registers, and some of those are registers used to configure the
integration of the RGMII/SGMII Cadence PHY used by MACB/GEM instances.
Wrap in a neat generic PHY provider, exposing two PHYs with standard
phy_init() / phy_set_mode() / phy_power_on() operations.
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20260309-macb-phy-v9-1-5afd87d9db43@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Pull phy updates from Vinod Koul:
"New Support:
- Qualcomm Eliza QMP UFS PHY
- Canaan K230 USB 2.0 PHY driver
- Mediatek mt8167 dsi-phy
- Eswin EIC7700 SATA PHY driver
Updates:
- Sorted subsytem Makefile/Kconfig and some kernel-doc udpates"
* tag 'phy-for-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
dt-bindings: phy: qcom,sc8280xp-qmp-ufs-phy: document the Eliza QMP UFS PHY
phy: qcom: m31-eusb2: clear PLL_EN during init
phy: eswin: Create eswin directory and add EIC7700 SATA PHY driver
dt-bindings: phy: eswin: Document the EIC7700 SoC SATA PHY
phy: apple: apple: Use local variable for ioremap return value
phy: qcom: qmp-usbc: Simplify check for non-NULL pointer
phy: marvell: mmp3-hsic: Avoid re-casting __iomem
phy: apple: atc: Make atcphy_dwc3_reset_ops variable static
dt-bindings: phy: mediatek,dsi-phy: Add support for mt8167
phy: usb: Add driver for Canaan K230 USB 2.0 PHY
dt-bindings: phy: Add Canaan K230 USB PHY
phy: phy-mtk-tphy: Update names and format of kernel-doc comments
phy: Sort the subsystem Kconfig
phy: Sort the subsystem Makefile
phy: move spacemit pcie driver to its subfolder
Geert reports that enabling CONFIG_KUNIT_ALL_TESTS shouldn't enable
features that aren't enabled without it. That isn't what "*all* tests"
means, but as the prompt puts it, "All KUnit tests with satisfied
dependencies".
The impact is that enabling CONFIG_KUNIT_ALL_TESTS brings features which
cannot be disabled as built-in into the kernel.
Keep the pattern where consumer drivers have to "select PHY_COMMON_PROPS",
but if KUNIT_ALL_TESTS is enabled, also make PHY_COMMON_PROPS user
selectable, so it can be turned off.
Modify PHY_COMMON_PROPS_TEST to depend on PHY_COMMON_PROPS rather than
select it.
Fixes: e7556b59ba ("phy: add phy_get_rx_polarity() and phy_get_tx_polarity()")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/linux-phy/CAMuHMdUBaoYKNj52gn8DQeZFZ42Cvm6xT6fvo0-_twNv1k3Jhg@mail.gmail.com/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20260226153315.3530378-1-vladimir.oltean@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
With CONFIG_TYPEC=m, this driver cannot be built-in:
arm-linux-gnueabi/bin/arm-linux-gnueabi-ld: drivers/phy/phy-google-usb.o: in function `google_usb_phy_remove':
phy-google-usb.c:(.text+0x24): undefined reference to `typec_switch_unregister'
Add CONFIG_TYPEC as a hard dependency here to force a clean build.
In theory, compile-testing with CONFIG_TYPEC=n would also work, but
that seems pointless.
Fixes: cbce66669c ("phy: Add Google Tensor SoC USB PHY driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260202095655.1289973-1-arnd@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
phy common properties
Vladimir Oltean <vladimir.oltean@nxp.com> wrote:
Introduce "rx-polarity" and "tx-polarity" device tree properties with
Kunit tests
Add helpers in the generic PHY folder which can be used using 'select
PHY_COMMON_PROPS' from Kconfig, without otherwise needing to
enable GENERIC_PHY.
These helpers need to deal with the slight messiness of the fact that
the polarity properties are arrays per protocol, and with the fact that
there is no default value mandated by the standard properties, all
default values depend on driver and protocol (PHY_POL_NORMAL may be a
good default for SGMII, whereas PHY_POL_AUTO may be a good default for
PCIe).
Push the supported mask of polarities to these helpers, to simplify
drivers such that they don't need to validate what's in the device tree
(or other firmware description).
Add a KUnit test suite to make sure that the API produces the expected
results. The fact that we use fwnode structures means we can validate
with software nodes, and as opposed to the device_property API, we can
bypass the need to have a device structure.
Co-developed-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20260111093940.975359-6-vladimir.oltean@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The SpacemiT K1 SoC includes three USB ports:
- One USB2.0 OTG port
- One USB2.0 host-only port
- One USB3.0 port with an integrated USB2.0 DRD interface
Each of these ports is connected to a USB2.0 PHY responsible for USB2
transmission.
This commit adds support for the SpacemiT K1 USB2.0 PHY, which is
compliant with the USB 2.0 specification and supports both 8-bit 60MHz
and 16-bit 30MHz parallel interfaces.
Signed-off-by: Ze Huang <huang.ze@linux.dev>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: Junzhong Pan <panjunzhong@linux.spacemit.com>
Link: https://patch.msgid.link/20251017-k1-usb2phy-v6-2-7cf9ea2477a1@linux.dev
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The Apple Type-C PHY (ATCPHY) is a PHY for USB 2.0, USB 3.x,
USB4/Thunderbolt, and DisplayPort connectivity found in Apple Silicon SoCs.
The PHY handles muxing between these different protocols and also provides
the reset controller for the attached dwc3 USB controller.
There is no documentation available for this PHY and the entire sequence
of MMIO pokes has been figured out by tracing all MMIO access of Apple's
driver under a thin hypervisor and correlating the register reads/writes
to their kernel's debug output to find their names. Deviations from this
sequence generally results in the port not working or, especially when
the mode is switched to USB4 or Thunderbolt, to some watchdog resetting
the entire SoC.
This initial commit already introduces support for Display Port and
USB4/Thunderbolt but the drivers for these are not ready. We cannot
control the alternate mode negotiation and are stuck with whatever Apple's
firmware decides such that any DisplayPort or USB4/Thunderbolt device will
result in a correctly setup PHY but not be usable until the other drivers
are upstreamed as well.
Co-developed-by: Janne Grunau <j@jannau.net>
Signed-off-by: Janne Grunau <j@jannau.net>
Co-developed-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> # for reset controller
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sven Peter <sven@kernel.org>
Link: https://patch.msgid.link/20251214-b4-atcphy-v3-3-ba82b20e9459@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Introduce a driver that supports three PHYs found on the SpacemiT
K1 SoC. The first PHY is a combo PHY that can be configured for
use for either USB 3 or PCIe. The other two PHYs support PCIe
only.
All three PHYs must be programmed with an 8 bit receiver termination
value, which must be determined dynamically. Only the combo PHY is
able to determine this value. The combo PHY performs a special
calibration step at probe time to discover this, and that value is
used to program each PHY that operates in PCIe mode. The combo
PHY must therefore be probed before either of the PCIe-only PHYs
will be used.
Each PHY has an internal PLL driven from an external oscillator.
This PLL started when the PHY is first initialized, and stays
on thereafter.
During normal operation, the USB or PCIe driver using the PHY must
ensure (other) clocks and resets are set up properly.
However PCIe mode clocks are enabled and resets are de-asserted
temporarily by this driver to perform the calibration step on the
combo PHY.
Tested-by: Junzhong Pan <panjunzhong@linux.spacemit.com>
Signed-off-by: Alex Elder <elder@riscstar.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/all/ba532f8d-a452-40e5-af46-b58b89f70a92@linaro.org/ [1]
Tested-by: Yixun Lan <dlan@gentoo.org>
Link: https://patch.msgid.link/20251218151235.454997-4-elder@riscstar.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Realtek DHC (digital home center) RTD SoCs support DWC3 XHCI USB
controller. Added the driver to drive the USB 2.0 PHY transceivers.
Note: New driver,remove the port status notification on legacy USB PHY.
Use the generic PHY to notify the usb device connect and disconnect.
To avoid using these PHYs would require describing the very same
PHY using both the generic "phy" property and the deprecated "usb-phy"
property.
Signed-off-by: Stanley Chang <stanley_chang@realtek.com>
Link: https://lore.kernel.org/r/20231213031203.4911-2-stanley_chang@realtek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 134e6d25f6.
The recently added Realtek PHY drivers depend on the new port status
notification mechanism which was built on the deprecated USB PHY
implementation and devicetree binding.
Specifically, using these PHYs would require describing the very same
PHY using both the generic "phy" property and the deprecated "usb-phy"
property which is clearly wrong.
We should not be building new functionality on top of the legacy USB PHY
implementation even if it is currently stuck in some kind of
transitional limbo.
Revert the new Realtek PHY drivers for now so that the port status
notification interface can be reverted and replaced.
Fixes: 134e6d25f6 ("phy: realtek: usb: Add driver for the Realtek SoC USB 2.0 PHY")
Cc: stable@vger.kernel.org # 6.6
Cc: Stanley Chang <stanley_chang@realtek.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231106110654.31090-3-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The tc358746 driver selects CONFIG_GENERIC_PHY_MIPI_DPHY and links to
that, but this fails when CONFIG_GENERIC_PHY is disabled, because Kbuild
then never enters the drivers/phy directory for building object files:
ERROR: modpost: "phy_mipi_dphy_get_default_config_for_hsclk" [drivers/media/i2c/tc358746.ko] undefined!
Add an explicit 'select GENERIC_PHY' here to ensure that the directory
is entered, and add another dependency on that symbol so make it
more obvious what is going on if another driver has the same problem,
as this will produce a Kconfig warning.
Link: https://lore.kernel.org/linux-media/20230623152318.2276816-1-arnd@kernel.org
Fixes: 80a21da360 ("media: tc358746: add Toshiba TC358746 Parallel to CSI-2 bridge driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The X-Gene PHY driver is unlikely to be useful on a kernel without general
X-Gene support enabled but currently only depends on arm64 rather than the
specific platform support. Narrow the dependency to ARCH_XGENE like we do
for other X-Gene specific drivers to ensure that users who have configured
down the set of platforms enabled don't see the option.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230221-phy-build-deps-v1-1-7091bcbd16b0@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The driver adds support for generic CAN transceivers. Currently
the modes supported by this driver are standby and normal modes for TI
TCAN1042 and TCAN1043 CAN transceivers.
The transceiver is modelled as a phy with pins controlled by gpios, to put
the transceiver in various device functional modes. It also gets the phy
attribute max_link_rate for the usage of CAN drivers.
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/r/20210510051006.11393-4-a-govindraju@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The Intel Lightning Mountain (LGM) USB3 USB is only present on Intel
Lightning Mountain SoCs. Hence add a dependency on X86, to prevent
asking the user about this driver when configuring a kernel without
Intel Lightning Mountain platform support.
Fixes: 1cce8f73a5 ("phy: Add USB3 PHY support for Intel LGM SoC")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20210129131753.2656306-1-geert+renesas@glider.be
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The MIPI D-PHY spec defines default values and boundaries for most of the
parameters it defines. Introduce helpers to help drivers get meaningful
values based on their current parameters, and validate the boundaries of
these parameters if needed.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
This is a cleaned up port of the downstream i.MX8MQ USB3 PHY driver.
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Pull USB/PHY updates from Greg KH:
"Here is the big USB/PHY driver patches for 4.20-rc1
Lots of USB changes in here, primarily in these areas:
- typec updates and new drivers
- new PHY drivers
- dwc2 driver updates and additions (this old core keeps getting
added to new devices.)
- usbtmc major update based on the industry group coming together and
working to add new features and performance to the driver.
- USB gadget additions for new features
- USB gadget configfs updates
- chipidea driver updates
- other USB gadget updates
- USB serial driver updates
- renesas driver updates
- xhci driver updates
- other tiny USB driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (229 commits)
usb: phy: ab8500: silence some uninitialized variable warnings
usb: xhci: tegra: Add genpd support
usb: xhci: tegra: Power-off power-domains on removal
usbip:vudc: BUG kmalloc-2048 (Not tainted): Poison overwritten
usbip: tools: fix atoi() on non-null terminated string
USB: misc: appledisplay: fix backlight update_status return code
phy: phy-pxa-usb: add a new driver
usb: host: add DT bindings for faraday fotg2
usb: host: ohci-at91: fix request of irq for optional gpio
usb/early: remove set but not used variable 'remain_length'
usb: typec: Fix copy/paste on typec_set_vconn_role() kerneldoc
usb: typec: tcpm: Report back negotiated PPS voltage and current
USB: core: remove set but not used variable 'udev'
usb: core: fix memory leak on port_dev_path allocation
USB: net2280: Remove ->disconnect() callback from net2280_pullup()
usb: dwc2: disable power_down on rockchip devices
usb: gadget: udc: renesas_usb3: add support for r8a77990
dt-bindings: usb: renesas_usb3: add bindings for r8a77990
usb: gadget: udc: renesas_usb3: Add r8a774a1 support
USB: serial: cypress_m8: remove set but not used variable 'iflag'
...
The Microsemi Ocelot can mux SerDes lanes (aka macros) to different
switch ports or even make it act as a PCIe interface.
This adds support for the muxing of the SerDes.
Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add driver for the Cadence SD0801 "Torrent" PHY used with the Cadence MHDP
DisplayPort Tx controller.
Integration with the MHDP driver will be the subject of another commit.
Signed-off-by: Scott Telford <stelford@cadence.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
