When preparing the panel, it seems that it always expects commands to be
transferred in LP mode. However, the disable function removes the
MIPI_DSI_MODE_LPM flag, and no other function re-adds it.
As the unprepare function contains no DSI commands, re-adding the flag
just after disabling the panel should be safe. Add the code re-adding
the flag after the two commands for disabling the panel are sent.
This fixes screen unblanking (after blanking once) on
mt8188-geralt-ciri-sku1 device.
Cc: stable@vger.kernel.org # 6.11+
Fixes: 0ef94554dc ("drm/panel: himax-hx83102: Break out as separate driver")
Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260425165751.1716569-1-zhengxingda@iscas.ac.cn
When preparing the panel, it seems that it always expects commands to be
transferred in LP mode. However, the disable function removes the
MIPI_DSI_MODE_LPM flag, and no other function re-adds it.
As the unprepare function contains no DSI commands, re-adding the flag
just after disabling the panel should be safe. Add the code re-adding
the flag after the two commands for disabling the panel are sent.
This fixes error messages shown in kernel log when unblanking on
mt8183-kukui-kodama-sku32 device.
Cc: stable@vger.kernel.org
Fixes: a869b9db7a ("drm/panel: support for boe tv101wum-nl6 wuxga dsi video mode panel")
Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260503091708.1079962-1-zhengxingda@iscas.ac.cn
Like a number of other panel drivers, this newly merged driver
needs DRM_DISPLAY_DSC_HELPER to be enabled:
arm-linux-gnueabi-ld: drivers/gpu/drm/panel/panel-himax-hx83121a.o: in function `himax_prepare':
panel-himax-hx83121a.c:(.text+0x1024): undefined reference to `drm_dsc_pps_payload_pack'
Fixes: a7c61963b7 ("drm/panel: Add Himax HX83121A panel driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260413071043.3829868-1-arnd@kernel.org
Pull more drm fixes from Dave Airlie:
"These are the regular fixes that have built up over last couple of
weeks, all pretty minor and spread all over.
atomic:
- raise the vblank timeout to avoid it on virtual drivers
- fix colorop duplication
bridge:
- stm_lvds: state check fix
- dw-mipi-dsi: bridge reference leak fix
panel:
- visionx-rm69299: init fix
dma-fence:
- fix sparse warning
dma-buf:
- UAF fix
panthor:
- mapping fix
arcgpu:
- device_node reference leak fix
nouveau:
- memory leak in error path fix
- overflow in reloc path for old hw fix
hv:
- Kconfig fix
v3d:
- infinite loop fix"
* tag 'drm-fixes-2026-04-24' of https://gitlab.freedesktop.org/drm/kernel:
drm/nouveau: fix u32 overflow in pushbuf reloc bounds check
MAINTAINERS: split hisilicon maintenance and add Yongbang Shi for hibmc-drm matainers
drm/v3d: Reject empty multisync extension to prevent infinite loop
drm/panel: visionox-rm69299: Make use of prepare_prev_first
drm/drm_atomic: duplicate colorop states if plane color pipeline in use
drm/nouveau: fix nvkm_device leak on aperture removal failure
hv: Select CONFIG_SYSFB only for CONFIG_HYPERV_VMBUS
dma-fence: Silence sparse warning in dma_fence_describe
drm/bridge: dw-mipi-dsi: Fix bridge leak when host attach fails
drm/arcpgu: fix device node leak
drm/panthor: Fix outdated function documentation
drm/panthor: Extend VM locked region for remap case to be a superset
dma-buf: fix UAF in dma_buf_put() tracepoint
drm/bridge: stm_lvds: Do not fail atomic_check on disabled connector
drm/atomic: Increase timeout in drm_atomic_helper_wait_for_vblanks()
The Ilitek ILI9806E controller can support different transport buses,
such as MIPI-DSI and SPI. The current implementation is specific to
the MIPI-DSI interface.
In preparation for adding SPI support, rename the current Kconfig
symbol and files to be DSI-specific, clarifying the current scope
of the code.
Since DRM_PANEL_ILITEK_ILI9806E is not used in any in-tree defconfig,
the symbol is renamed directly to DRM_PANEL_ILITEK_ILI9806E_DSI without
providing a legacy compatibility alias.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260318073346.18041-2-dario.binacchi@amarulasolutions.com
Convert the driver to use the non-deprecated mipi_dsi_*_multi() helpers and
mipi_dsi_msleep().
Switch DCS command sequences to the multi context API and
accumulate errors via struct mipi_dsi_multi_context. Replace
open-coded error handling with the multi helpers and convert
nt36672a_send_cmds() and power sequencing accordingly.
This patch is intended to functionally be a no-op, though there is one
slight change. Previously a failure in regulator_bulk_disable() would
have caused nt36672a_panel_unprepare() to return an error. Now it
won't. No other errors in nt36672a_panel_unprepare() were propagated,
so this makes things consistent.
Signed-off-by: Chintan Patel <chintanlike@gmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patch.msgid.link/20260305044921.10942-1-chintanlike@gmail.com
Convert to the non-deprecated mipi_dsi_*_multi() helpers per the TODO
list. This reduces boilerplate error checking while providing proper
error accumulation.
Use mipi_dsi_msleep() and mipi_dsi_usleep_range() macros for delays.
Replace mdelay(10) and mdelay(20) with mipi_dsi_usleep_range() calls
using tighter slop (10-11ms and 20-21ms respectively) since these
functions aren't run often and don't need large timing windows.
In jdi_panel_off(), reset the error context between display_off and
enter_sleep_mode to preserve the original behavior of continuing power-down
even if display_off fails. This ensures enter_sleep_mode executes before
GPIO/regulator control, which is critical for proper power sequencing.
Signed-off-by: Chintan Patel <chintanlike@gmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patch.msgid.link/20260203044605.5890-1-chintanlike@gmail.com
Clang warns (or errors with CONFIG_WERROR=y / W=e):
drivers/gpu/drm/panel/panel-ilitek-ili9882t.c:95:16: error: initializer overrides prior initialization of this subobject [-Werror,-Winitializer-overrides]
95 | .vbr_enable = 0,
| ^
drivers/gpu/drm/panel/panel-ilitek-ili9882t.c:90:16: note: previous initialization is here
90 | .vbr_enable = false,
| ^~~~~
drivers/gpu/drm/panel/panel-ilitek-ili9882t.c:97:19: error: initializer overrides prior initialization of this subobject [-Werror,-Winitializer-overrides]
97 | .rc_model_size = DSC_RC_MODEL_SIZE_CONST,
| ^~~~~~~~~~~~~~~~~~~~~~~
include/drm/display/drm_dsc.h:22:38: note: expanded from macro 'DSC_RC_MODEL_SIZE_CONST'
22 | #define DSC_RC_MODEL_SIZE_CONST 8192
| ^~~~
drivers/gpu/drm/panel/panel-ilitek-ili9882t.c:91:19: note: previous initialization is here
91 | .rc_model_size = DSC_RC_MODEL_SIZE_CONST,
| ^~~~~~~~~~~~~~~~~~~~~~~
include/drm/display/drm_dsc.h:22:38: note: expanded from macro 'DSC_RC_MODEL_SIZE_CONST'
22 | #define DSC_RC_MODEL_SIZE_CONST 8192
| ^~~~
drivers/gpu/drm/panel/panel-ilitek-ili9882t.c:132:25: error: initializer overrides prior initialization of this subobject [-Werror,-Winitializer-overrides]
132 | .initial_scale_value = 32,
| ^~
drivers/gpu/drm/panel/panel-ilitek-ili9882t.c:126:25: note: previous initialization is here
126 | .initial_scale_value = 32,
| ^~
drivers/gpu/drm/panel/panel-ilitek-ili9882t.c:133:20: error: initializer overrides prior initialization of this subobject [-Werror,-Winitializer-overrides]
133 | .nfl_bpg_offset = 3511,
| ^~~~
drivers/gpu/drm/panel/panel-ilitek-ili9882t.c:108:20: note: previous initialization is here
108 | .nfl_bpg_offset = 1402,
| ^~~~
GCC would warn about this in the same manner but its version,
-Woverride-init, is disabled for a normal kernel build in
scripts/Makefile.warn. For clang, -Wextra in drivers/gpu/drm/Makefile
turns it back but GCC respects turning it off earlier in the command
line.
Of all the duplicate fields in the initializer, only nfl_bpg_offset is a
different value. Clear up the duplicate initializers, keeping the
'false' value for .vbr_enable, as it is bool, and the second value for
.nfl_bpg_offset, assuming it is the correct one since it was the one
tested in the original change.
Fixes: 65ce1f5834 ("drm/panel: ilitek-ili9882t: Switch Tianma TL121BVMS07 to DSC 120Hz mode")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20260114-panel-ilitek-ili9882t-fix-override-init-v1-1-1d69a2b096df@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
FriendlyELEC's HD702E module is an eDP panel (in as much as it's some
LVDS LCD behind a Chrontel CH7511B eDP bridge), so move its data over
to the eDP driver, also resolving the warning about the missing bpc
value in the process.
The unfortunate combination of HPD not being wired up and the RK3399 eDP
controller's behaviour seems to result in the EDID not being readable
over DP-AUX without probing the panel first, thus the hard-coded mode is
still needed to get things going.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patch.msgid.link/a00a59dcef3693efb02a8ee942848fbeaeaf05ba.1769191673.git.robin.murphy@arm.com
