Pull more drm fixes from Dave Airlie:
"These are the regular fixes that have built up over last couple of
weeks, all pretty minor and spread all over.
atomic:
- raise the vblank timeout to avoid it on virtual drivers
- fix colorop duplication
bridge:
- stm_lvds: state check fix
- dw-mipi-dsi: bridge reference leak fix
panel:
- visionx-rm69299: init fix
dma-fence:
- fix sparse warning
dma-buf:
- UAF fix
panthor:
- mapping fix
arcgpu:
- device_node reference leak fix
nouveau:
- memory leak in error path fix
- overflow in reloc path for old hw fix
hv:
- Kconfig fix
v3d:
- infinite loop fix"
* tag 'drm-fixes-2026-04-24' of https://gitlab.freedesktop.org/drm/kernel:
drm/nouveau: fix u32 overflow in pushbuf reloc bounds check
MAINTAINERS: split hisilicon maintenance and add Yongbang Shi for hibmc-drm matainers
drm/v3d: Reject empty multisync extension to prevent infinite loop
drm/panel: visionox-rm69299: Make use of prepare_prev_first
drm/drm_atomic: duplicate colorop states if plane color pipeline in use
drm/nouveau: fix nvkm_device leak on aperture removal failure
hv: Select CONFIG_SYSFB only for CONFIG_HYPERV_VMBUS
dma-fence: Silence sparse warning in dma_fence_describe
drm/bridge: dw-mipi-dsi: Fix bridge leak when host attach fails
drm/arcpgu: fix device node leak
drm/panthor: Fix outdated function documentation
drm/panthor: Extend VM locked region for remap case to be a superset
dma-buf: fix UAF in dma_buf_put() tracepoint
drm/bridge: stm_lvds: Do not fail atomic_check on disabled connector
drm/atomic: Increase timeout in drm_atomic_helper_wait_for_vblanks()
dw_mipi_dsi_host_attach() and dw_mipi_dsi2_host_attach() call
drm_bridge_add() before pdata->host_ops->attach(). If attach fails,
the bridge stayed registered without drm_bridge_remove(), leaking the
bridge reference and leaving the device on the global bridge list.
Fixes: 90910a6511 ("drm/bridge/synopsys: dsi: add ability to have glue-specific attach and detach")
Fixes: 0d6d86253f ("drm/bridge/synopsys: Add MIPI DSI2 host controller bridge")
Signed-off-by: Osama Abdelkader <osama.abdelkader@gmail.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20260403145208.15890-1-osama.abdelkader@gmail.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Now that we introduced a new drm_output_color_format enum to represent
what DRM_COLOR_FORMAT_* bits were representing, we can switch to the new
enum.
The main difference is that while DRM_COLOR_FORMAT_ was a bitmask,
drm_output_color_format is a proper enum. However, the enum was done is
such a way than DRM_COLOR_FORMAT_X = BIT(DRM_OUTPUT_COLOR_FORMAT_X) so
the transitition is easier.
The only thing we need to consider is if the original code meant to use
that value as a bitmask, in which case we do need to keep the bit shift,
or as a discriminant in which case we don't.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260305-drm-rework-color-formats-v3-9-f3935f6db579@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Now that we introduced a new drm_output_color_format enum to represent
what DRM_COLOR_FORMAT_* bits were representing, we can switch to the new
enum.
The main difference is that while DRM_COLOR_FORMAT_ was a bitmask,
drm_output_color_format is a proper enum. However, the enum was done is
such a way than DRM_COLOR_FORMAT_X = BIT(DRM_OUTPUT_COLOR_FORMAT_X) so
the transitition is easier.
The only thing we need to consider is if the original code meant to use
that value as a bitmask, in which case we do need to keep the bit shift,
or as a discriminant in which case we don't.
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260305-drm-rework-color-formats-v3-8-f3935f6db579@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
drm-misc-next for v7.1:
UAPI Changes:
connector:
- Add panel_type property
fourcc:
- Add ARM interleaved 64k modifier
nouveau:
- Query Z-Cull info with DRM_IOCTL_NOUVEAU_GET_ZCULL_INFO
Cross-subsystem Changes:
coreboot:
- Clean up coreboot framebuffer support
dma-buf:
- Provide revoke mechanism for shared buffers
- Rename move_notify callback to invalidate_mappings and update users.
- Always enable move_notify
- Support dma_fence_was_initialized() test
- Protect dma_fence_ops by RCU and improve locking
- Fix sparse warnings
Core Changes:
atomic:
- Allocate drm_private_state via callback and convert drivers
atomic-helper:
- Use system_percpu_wq
buddy:
- Make buddy allocator available to all DRM drivers
- Document flags and structures
colorop:
- Add destroy helper and convert drivers
fbdev-emulation:
- Clean up
gem:
- Fix drm_gem_objects_lookup() error cleanup
Driver Changes:
amdgpu:
- Set panel_type to OELD for eDP
atmel-hlcdc:
- Support sana5d65 LCD controller
bridge:
- anx7625: Support USB-C plus DT bindings
- connector: Fix EDID detection
- dw-hdmi-qp: Support Vendor-Specfic and SDP Infoframes; improve others
- fsl-ldb: Fix visual artifacts plus related DT property 'enable-termination-resistor'
- imx8qxp-pixel-link: Improve bridge reference handling
- lt9611: Support Port-B-only input plus DT bindings
- tda998x: Support DRM_BRIDGE_ATTACH_NO_CONNECTOR; Clean up
- Support TH1520 HDMI plus DT bindings
- Clean up
imagination:
- Clean up
komeda:
- Fix integer overflow in AFBC checks
mcde:
- Improve bridge handling
nouveau:
- Provide Z-cull info to user space
- gsp: Support GA100
- Shutdown on PCI device shutdown
- Clean up
panel:
- panel-jdi-lt070me05000: Use mipi-dsi multi functions
- panel-edp: Support Add AUO B116XAT04.1 (HW: 1A); Support CMN N116BCL-EAK (C2); Support FriendlyELEC plus DT changes
- Fix Kconfig dependencies
panthor:
- Add tracepoints for power and IRQs
rcar-du:
- dsi: fix VCLK calculation
rockchip:
- vop2: Use drm_ logging functions
- Support DisplayPort on RK3576
sysfb:
- corebootdrm: Support system framebuffer on coreboot firmware; detect orientation
- Clean up pixel-format lookup
sun4i:
- Clean up
tilcdc:
- Use DT bindings scheme
- Use managed DRM interfaces
- Support DRM_BRIDGE_ATTACH_NO_CONNECTOR
- Clean up a lot of obsolete code
v3d:
- Clean up
vc4:
- Use system_percpu_wq
- Clean up
verisilicon:
- Support DC8200 plus DT bindings
virtgpu:
- Support PRIME imports with enabled 3D
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260226143615.GA47200@linux.fritz.box
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
Make use of the recently introduced dw_hdmi_qp_write_infoframe() helper
to simplify the writing of the Audio InfoFrame packet header and body
registers.
Additionally, discard the redundant static values identifying the frame
version and length.
Moreover, since now having dedicated callbacks per InfoFrame type, move
the implementation to dw_hdmi_qp_bridge_write_audio_infoframe() and
drop dw_hdmi_qp_config_audio_infoframe().
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Link: https://patch.msgid.link/20260129-dw-hdmi-qp-iframe-v2-5-0157ad05232c@collabora.com
Signed-off-by: Daniel Stone <daniels@collabora.com>
Make use of the recently introduced dw_hdmi_qp_write_infoframe() helper
to simplify the writing of the Dynamic Range and Mastering (DRM)
InfoFrame packet header and body registers.
Moreover, since now having dedicated callbacks per InfoFrame type, move
the implementation to dw_hdmi_qp_bridge_write_hdr_drm_infoframe() and
drop dw_hdmi_qp_config_drm_infoframe().
While at it, also discard the unnecessary infoframe size verification,
as well as the redundant disabling of the packet transmission (already
done by the explicit call to the clear callback).
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Link: https://patch.msgid.link/20260129-dw-hdmi-qp-iframe-v2-4-0157ad05232c@collabora.com
Signed-off-by: Daniel Stone <daniels@collabora.com>
Make use of the recently introduced dw_hdmi_qp_write_infoframe() helper
to simplify the writing of the Auxiliary Video InfoFrame (AVI) packet
header and body registers.
Moreover, since now having dedicated callbacks per InfoFrame type, move
the implementation to dw_hdmi_qp_bridge_write_avi_infoframe() and drop
dw_hdmi_qp_config_avi_infoframe().
While at it, also discard the superfluous infoframe size verification.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Link: https://patch.msgid.link/20260129-dw-hdmi-qp-iframe-v2-3-0157ad05232c@collabora.com
Signed-off-by: Daniel Stone <daniels@collabora.com>
Since commit b626b1a1c9 ("drm/bridge: refactor HDMI InfoFrame
callbacks"), the following warning is generated:
[ 13.654149] rockchip-drm display-subsystem: [drm] HDMI VSI not supported
Add the missing support for sending HDMI Vendor-Specific Infoframes.
Additionally, introduce dw_hdmi_qp_write_{pkt|infoframe}() helpers, as a
prerequisite to rework all dw_hdmi_qp_bridge_write_*_infoframe()
callbacks and get rid of some boilerplate code.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Link: https://patch.msgid.link/20260129-dw-hdmi-qp-iframe-v2-1-0157ad05232c@collabora.com
Signed-off-by: Daniel Stone <daniels@collabora.com>
Fix several issues in dw_dp_bind() error handling:
1. Missing return after drm_bridge_attach() failure - the function
continued execution instead of returning an error.
2. Resource leak: drm_dp_aux_register() is not a devm function, so
drm_dp_aux_unregister() must be called on all error paths after
aux registration succeeds. This affects errors from:
- drm_bridge_attach()
- phy_init()
- devm_add_action_or_reset()
- platform_get_irq()
- devm_request_threaded_irq()
3. Bug fix: platform_get_irq() returns the IRQ number or a negative
error code, but the error path was returning ERR_PTR(ret) instead
of ERR_PTR(dp->irq).
Use a goto label for cleanup to ensure consistent error handling.
Fixes: 86eecc3a9c ("drm/bridge: synopsys: Add DW DPTX Controller support library")
Cc: stable@vger.kernel.org
Signed-off-by: Osama Abdelkader <osama.abdelkader@gmail.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20260102155553.13243-1-osama.abdelkader@gmail.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Having only a single set of callbacks, hdmi_clear_infoframe and
hdmi_write_infoframe, bridge drivers don't have an easy way to signal to
the DRM framework, which InfoFrames are actually supported by the
hardware and by the driver and which are not. Also, it makes it
extremely easy for HDMI bridge drivers to skip implementing the
seemingly required InfoFrames (e.g. HDMI VSI). Last, but not least,
those callbacks take a single 'type' parameter, which makes it
impossible to implement support for multiple VSIs (which will be
required once we start working on HDMI Forum VSI).
Split the callbacks into a per-InfoFrame-kind pairs, letting the bridge
drivers actually signal supported features. The implementation follows
the overall drm_bridge design, where the bridge has a single
drm_bridge_funcs implementation and signals, which functions are to be
called using the drm_bridge->ops flags.
The AVI and HDMI VSI are assumed to be required for a normal HDMI
operation (with the drivers getting a drm_warn_once() stub
implementation if one is missing). The Audio InfoFrame is handled by the
existing DRM_BRIDGE_OP_HDMI_AUDIO, while the SPD and HDR DRM InfoFrames
got new drm_bridge_ops values.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260107-limit-infoframes-2-v4-5-213d0d3bd490@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Add support for the dw-hdmi-qp driver to handle devices with missing
HPD pins.
Since in this situation we are now polling for the EDID data via i2c
change the error message to a rate limited debug message when we are
unable to complete an i2c read, as a disconnected device would
otherwise fill dmesg with i2c read errors.
Reviewed-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20251119225526.70588-3-macroalpha82@gmail.com
After resume from suspend to RAM, the following splash is generated if
the HDMI driver is probed (independent of a connected cable):
[ 1194.484052] irq 80: nobody cared (try booting with the "irqpoll" option)
[ 1194.484074] CPU: 0 UID: 0 PID: 627 Comm: rtcwake Not tainted 6.17.0-rc7-g96f1a11414b3 #1 PREEMPT
[ 1194.484082] Hardware name: Rockchip RK3576 EVB V10 Board (DT)
[ 1194.484085] Call trace:
[ 1194.484087] ... (stripped)
[ 1194.484283] handlers:
[ 1194.484285] [<00000000bc363dcb>] dw_hdmi_qp_main_hardirq [dw_hdmi_qp]
[ 1194.484302] Disabling IRQ #80
Apparently the HDMI IP is losing part of its state while the system
is suspended and generates spurious interrupts during resume. The
bug has not yet been noticed, as system suspend does not yet work
properly on upstream kernel with either the Rockchip RK3588 or RK3576
platform.
Fixes: 128a9bf8ac ("drm/rockchip: Add basic RK3588 HDMI output support")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20251014-rockchip-hdmi-suspend-fix-v1-1-983fcbf44839@collabora.com
Currently the TIMER_BASE_CONFIG0 register gets initialized to a fixed
value as initially found in vendor driver code supporting the RK3588
SoC. As a matter of fact the value matches the rate of the HDMI TX
reference clock, which is roughly 428.57 MHz.
However, on RK3576 SoC that rate is slightly lower, i.e. 396.00 MHz, and
the incorrect register configuration breaks CEC functionality.
Set the timer base according to the actual reference clock rate that
shall be provided by the platform driver. Otherwise fallback to the
vendor default.
While at it, also drop the unnecessary empty lines in
dw_hdmi_qp_init_hw().
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250903-rk3588-hdmi-cec-v4-2-fa25163c4b08@collabora.com
The DW DP TX Controller is compliant with the DisplayPort Specification
Version 1.4 with the following features:
* DisplayPort 1.4a
* Main Link: 1/2/4 lanes
* Main Link Support 1.62Gbps, 2.7Gbps, 5.4Gbps and 8.1Gbps
* AUX channel 1Mbps
* Single Stream Transport(SST)
* Multistream Transport (MST)
* Type-C support (alternate mode)
* HDCP 2.2, HDCP 1.3
* Supports up to 8/10 bits per color component
* Supports RBG, YCbCr4:4:4, YCbCr4:2:2, YCbCr4:2:0
* Pixel clock up to 594MHz
* I2S, SPDIF audio interface
Add library with common helpers to make it can be shared with
other SoC.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20250822063959.692098-3-andyshrk@163.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
In some application scenarios, we hope to get the corresponding
connector when the bridge's detect hook is invoked.
In most cases, we can get the connector by drm_atomic_get_connector_for_encoder
if the encoder attached to the bridge is enabled, however there will
still be some scenarios where the detect hook of the bridge is called
but the corresponding encoder has not been enabled yet. For instance,
this occurs when the device is hot plug in for the first time.
Since the call to bridge's detect is initiated by the connector, passing
down the corresponding connector directly will make things simpler.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250703125027.311109-3-andyshrk@163.com
[DB: added the chunk to the cdn-dp driver]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Fix compile-time warnings
drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/bridge/aux-bridge.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/bridge/aux-hpd-bridge.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/bridge/imx/imx-legacy-bridge.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/bridge/panel.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/bridge/samsung-dsim.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/bridge/synopsys/dw-hdmi-qp.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/bridge/synopsys/dw-hdmi.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi2.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_bridge.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_bridge_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: a934a57a42 ("scripts/misc-check: check missing #include <linux/export.h> when W=1")
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250612121633.229222-4-tzimmermann@suse.de
devm_drm_bridge_alloc() is the new API to be used for allocating (and
partially initializing) a private driver struct embedding a struct
drm_bridge.
For many drivers having a simple code flow in the probe function, this
commit does a mass conversion automatically with the following semantic
patch. The changes have been reviewed manually for correctness as well as
to find any false positives.
The patch has been applied with the explicit exclusion of bridge/panel.c,
handled by a separate patch.
After applying the semantic patch, manually fixed these issues:
- 4 drivers need ERR_CAST() instead of PTR_ERR() as the function calling
devm_drm_bridge_alloc() returns a pointer
- re-added empty lines and comments that the script had removed but that
should stay
@@
type T;
identifier C;
identifier BR;
expression DEV;
expression FUNCS;
@@
-T *C;
+T *C;
...
(
-C = devm_kzalloc(DEV, ...);
-if (!C)
- return -ENOMEM;
+C = devm_drm_bridge_alloc(DEV, T, BR, FUNCS);
+if (IS_ERR(C))
+ return PTR_ERR(C);
|
-C = devm_kzalloc(DEV, ...);
-if (!C)
- return ERR_PTR(-ENOMEM);
+C = devm_drm_bridge_alloc(DEV, T, BR, FUNCS);
+if (IS_ERR(C))
+ return PTR_ERR(C);
)
...
-C->BR.funcs = FUNCS;
Reviewed-by: Manikandan Muralidharan <manikandan.m@microchip.com> # microchip-lvds.c
Reviewed-by: Douglas Anderson <dianders@chromium.org> # parade-ps8640
Tested-by: Douglas Anderson <dianders@chromium.org> # parade-ps8640
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250509-drm-bridge-convert-to-alloc-api-v3-2-b8bc1f16d7aa@bootlin.com
[Luca: fixed trivial patch conflict in adv7511_drv.c while applying]
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
The drm_bridge structure contains an encoder pointer that is widely used
by bridge drivers. This pattern is largely documented as deprecated in
other KMS entities for atomic drivers.
However, one of the main use of that pointer is done in attach to just
call drm_bridge_attach on the next bridge to add it to the bridge list.
While this dereferences the bridge->encoder pointer, it's effectively
the same encoder the bridge was being attached to.
We can make it more explicit by adding the encoder the bridge is
attached to to the list of attach parameters. This also removes the need
to dereference bridge->encoder in most drivers.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250313-bridge-connector-v6-1-511c54a604fb@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
