When returning from read_config_rom() function, the allocated buffer and
the previous buffer for configuration ROM should be released. The cleanup
function is useful in the case.
This commit uses the cleanup function to remove goto statements.
Link: https://lore.kernel.org/r/20251020115810.92839-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
TASCAM FW-1884/FW-1804/FW-1082 is too lazy to repspond to asynchronous
request at S400. The asynchronous transaction often results in timeout.
This is a problematic quirk.
This commit adds support for the quirk. When identifying the new quirk
flag, then the transaction speed is configured at S200.
Link: https://lore.kernel.org/r/20251018035532.287124-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Current implementation determines the maximum transaction speed supported
by the target device after reading bus information block of configuration
ROM. The read operations for root directory block are then performed at
the determined speed. However, some devices have quirks that cause issues
when transactions are performed at the determined speed.
In the first place, all devices are required to support the lowest speed
(S100) and must respond successfully to any read request within the
configuration ROM space. Therefore it is safe to postpone speed
determination until the entire configuration ROM has been read.
This commit moves the speed determination after reading root directory.
Link: https://lore.kernel.org/r/20251018035532.287124-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
A commit 3a93d082ba ("ALSA: firewire-motu: add support for MOTU Audio
Express") describes a quirk of MOTU Audio Express. The device returns
acknowledge packet with 0x10 as the pending state of any types of
asynchronous request transaction. It is completely out of specification.
This commit implements handling for that device-specific quirk. The quirk
is detected after reading the root directory of configuration ROM. When
processing the acknowledge code in 1394 OHCI AT context event handler,
firewire-ohci module seeks the device instance of destination node by
traversing device hierarchy. If the device has the quirk, the acknowledge
code is replaced with the standard code.
The 1394 OHCI AT context events occur for outgoing asynchronous request
packets. The device traversal is safe since no new request initiators
exist after the fw_card_instance has been invalidated.
Link: https://lore.kernel.org/r/20251013140311.97159-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Every time the bus manager runs, the cached configuration ROM content of
the IRM device is investigated to detect device-specific quirks. This
detection can be performed in advance when reading the configuration ROM.
This commit adds device quirk flags to the fw_device structure, and
initializes them after reading the bus information block of the
configuration ROM. The quirk flags are immutable once the configuration
ROM has been read. Although they are likely accessed concurrently only by
the bus manager, this commit ensures safe access by preventing torn writes
and reads using the WRITE_ONCE()/READ_ONCE() macros.
Link: https://lore.kernel.org/r/20251013140311.97159-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
The data mbmer in fw_node structure is an opaque pointer, while nowadays
it is just used to refer to fw_device associated with the fw_node.
This commit redefines the opaque pointer to a pointer to fw_device
structure, and adds some helper functions to set/get it.
Link: https://lore.kernel.org/r/20250908012108.514698-5-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Constify the following API:
struct device *device_find_child(struct device *dev, void *data,
int (*match)(struct device *dev, void *data));
To :
struct device *device_find_child(struct device *dev, const void *data,
device_match_t match);
typedef int (*device_match_t)(struct device *dev, const void *data);
with the following reasons:
- Protect caller's match data @*data which is for comparison and lookup
and the API does not actually need to modify @*data.
- Make the API's parameters (@match)() and @data have the same type as
all of other device finding APIs (bus|class|driver)_find_device().
- All kinds of existing device match functions can be directly taken
as the API's argument, they were exported by driver core.
Constify the API and adapt for various existing usages.
BTW, various subsystem changes are squashed into this commit to meet
'git bisect' requirement, and this commit has the minimal and simplest
changes to complement squashing shortcoming, and that may bring extra
code improvement.
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Uwe Kleine-König <ukleinek@kernel.org> # for drivers/pwm
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20241224-const_dfc_done-v5-4-6623037414d4@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When detecting updates of bus topology, the data of fw_device is newly
allocated and caches the content of configuration ROM from the
corresponding node. Then, the tree of device is sought to find the
previous data of fw_device corresponding to the node. If found, the
previous data is updated and reused and the data of fw_device newly
allocated is going to be released.
The above procedure is done in the call of device_find_child(), however it
is a bit abusing against the intention of the helper function, since it is
preferable to find only without updating.
This commit splits the update outside of the call.
Cc: Zijun Hu <zijun_hu@icloud.com>
Link: https://lore.kernel.org/r/20240820132132.28839-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
In core function, the instances of fw_device corresponding to firewire device
node in system are maintained by IDR. As of kernel v6.0, IDR has been
superseded by XArray and deprecated.
This commit replaces the usage of IDR with XArray to maintain the device
instances. The instance of XArray is allocated statically, and
initialized with XA_FLAGS_ALLOC so that the index of allocated entry starts
with zero and available as the minor identifier of device node.
Link: https://lore.kernel.org/r/20240812014251.165492-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
The core function maintains the instance of fw_device structure by IDR.
The concurrent access to IDR is protected by static read/write semaphore.
The semaphore is also utilized to protect concurrent access to the
content of configuration ROM cached to the instance so that the cache is
swapped to the latest one.
This commit uses guard macro to maintain the mutex.
Link: https://lore.kernel.org/r/20240805085408.251763-7-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
In the match() callback, the struct device_driver * should not be
changed, so change the function callback to be a const *. This is one
step of many towards making the driver core safe to have struct
device_driver in read-only memory.
Because the match() callback is in all busses, all busses are modified
to handle this properly. This does entail switching some container_of()
calls to container_of_const() to properly handle the constant *.
For some busses, like PCI and USB and HV, the const * is cast away in
the match callback as those busses do want to modify those structures at
this point in time (they have a local lock in the driver structure.)
That will have to be changed in the future if they wish to have their
struct device * in read-only-memory.
Cc: Rafael J. Wysocki <rafael@kernel.org>
Reviewed-by: Alex Elder <elder@kernel.org>
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Link: https://lore.kernel.org/r/2024070136-wrongdoer-busily-01e8@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the case of firewire core function, the caller of show functions for
device attributes is not only sysfs user, but also device initialization.
This commit adds memo about it against the typical assumption that the
functions are just dedicated to sysfs user.
Link: https://lore.kernel.org/lkml/20240318091759.678326-1-o-takashi@sakamocchi.jp/
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Per filesystems/sysfs.rst, show() should only use sysfs_emit()
or sysfs_emit_at() when formatting the value to be returned to user space.
coccinelle complains that there are still a couple of functions that use
snprintf(). Convert them to sysfs_emit().
> drivers/firewire/core-device.c:326:8-16: WARNING: please use sysfs_emit or sysfs_emit_at
No functional change intended
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Link: https://lore.kernel.org/r/20240122053942.80648-2-lizhijian@fujitsu.com
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
As the last part of support for legacy layout of configuration ROM, this
commit traverses vendor directory as well as root directory when
constructing modalias for unit device. The change brings loss of backward
compatibility since it can fill model field ('mo') which is 0 at current
implementation in the case. However, we can be optimistic against
regression for unit drivers in kernel, due to some points:
1. ALSA drivers for audio and music units use the model fields to match
device, however all of supported devices does not have such legacy
layout.
2. the other unit drivers (e.g. sbp2) does not use the model field to
match device.
The rest of concern is user space application. The most of applications
just take care of node device and does not use the modalias of unit
device, thus the change does not affect to them. But systemd project is
known to get affects from the change since it includes hwdb to take udev
to configure fw character device conveniently. I have a plan to work for
systemd so that the access permission of character device could be kept
across the change.
Suggested-by: Adam Goldman <adamg@pobox.com>
Link: https://lore.kernel.org/r/20231221134849.603857-9-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
As the part of support for legacy layout of configuration ROM, this
commit traverses vendor directory as well as root directory when showing
device attribute for node device. This change expects 'model_name'
attribute appears in node device, however it is probable to see the other
types of descriptor leaf if the vendor directory includes.
Suggested-by: Adam Goldman <adamg@pobox.com>
Link: https://lore.kernel.org/r/20231221134849.603857-8-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
As the part of support for legacy layout of configuration ROM, this
commit traverses vendor directory as well as root directory when showing
device attribute for node device. This change expects 'model' attribute
appears in node device, however it is probable to see the other types of
immediate values if the vendor directory includes.
Suggested-by: Adam Goldman <adamg@pobox.com>
Link: https://lore.kernel.org/r/20231221134849.603857-7-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
In IEEE 1394 specification, the size of bus information block of
configuration ROM is fixed to 5, thus the offset of root directory is 5.
Current implementation to handle device structures has the hard-coded
offset.
This commit replaces the offset with macro.
Link: https://lore.kernel.org/r/20231221134849.603857-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
If device_register() fails, the refcount of device is not 0, the name
allocated in dev_set_name() is leaked. To fix this by calling put_device(),
so that it will be freed in callback function kobject_cleanup().
unreferenced object 0xffff9d99035c7a90 (size 8):
comm "systemd-udevd", pid 168, jiffies 4294672386 (age 152.089s)
hex dump (first 8 bytes):
66 77 30 2e 30 00 ff ff fw0.0...
backtrace:
[<00000000e1d62bac>] __kmem_cache_alloc_node+0x1e9/0x360
[<00000000bbeaff31>] __kmalloc_node_track_caller+0x44/0x1a0
[<00000000491f2fb4>] kvasprintf+0x67/0xd0
[<000000005b960ddc>] kobject_set_name_vargs+0x1e/0x90
[<00000000427ac591>] dev_set_name+0x4e/0x70
[<000000003b4e447d>] create_units+0xc5/0x110
fw_unit_release() will be called in the error path, move fw_device_get()
before calling device_register() to keep balanced with fw_device_put() in
fw_unit_release().
Cc: stable@vger.kernel.org
Fixes: 1fa5ae857b ("driver core: get rid of struct device's bus_id string array")
Fixes: a1f64819fe ("firewire: struct device - replace bus_id with dev_name(), dev_set_name()")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
The flag of GFP_ATOMIC is given to the call of kmalloc when building node
tree, but the call is not atomic context. The call of
fw_core_handle_bus_reset() and fw_core_remove_card() builds the tree,
while they are done in specific workqueue or pci remove callback.
This commit obsolete the usage of GFP_ATOMIC.
Link: https://lore.kernel.org/r/20230604070255.172700-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.
This patch fixes the following warnings:
drivers/firewire/core-device.c: In function ‘set_broadcast_channel’:
drivers/firewire/core-device.c:969:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (data & cpu_to_be32(1 << 31)) {
^
drivers/firewire/core-device.c:974:3: note: here
case RCODE_ADDRESS_ERROR:
^~~~
drivers/firewire/core-iso.c: In function ‘manage_channel’:
drivers/firewire/core-iso.c:308:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
if ((data[0] & bit) == (data[1] & bit))
^
drivers/firewire/core-iso.c:312:3: note: here
default:
^~~~~~~
drivers/firewire/core-topology.c: In function ‘count_ports’:
drivers/firewire/core-topology.c:69:23: warning: this statement may fall through [-Wimplicit-fallthrough=]
(*child_port_count)++;
~~~~~~~~~~~~~~~~~~~^~
drivers/firewire/core-topology.c:70:3: note: here
case SELFID_PORT_PARENT:
^~~~
Warning level 3 was used: -Wimplicit-fallthrough=3
Notice that in some cases, the code comment is modified in
accordance with what GCC is expecting to find.
This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.
Cc: Kees Cook <keescook@chromium.org>
Cc: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (reworded a comment)
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details you
should have received a copy of the gnu general public license along
with this program if not write to the free software foundation inc
59 temple place suite 330 boston ma 02111 1307 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 1334 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fw_csr_string() truncates and terminates target strings like strlcpy()
does. Unlike strlcpy(), it returns the target strlen, not the source
strlen, hence users of fw_csr_string() are unable to detect truncation.
Point this behavior out in the kerneldoc comment.
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
PREPARE_[DELAYED_]WORK() are being phased out. They have few users
and a nasty surprise in terms of reentrancy guarantee as workqueue
considers work items to be different if they don't have the same work
function.
firewire core-device and sbp2 have been been multiplexing work items
with multiple work functions. Introduce fw_device_workfn() and
sbp2_lu_workfn() which invoke fw_device->workfn and
sbp2_logical_unit->workfn respectively and always use the two
functions as the work functions and update the users to set the
->workfn fields instead of overriding work functions using
PREPARE_DELAYED_WORK().
This fixes a variety of possible regressions since a2c1c57be8
"workqueue: consider work function when searching for busy work items"
due to which fw_workqueue lost its required non-reentrancy property.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: linux1394-devel@lists.sourceforge.net
Cc: stable@vger.kernel.org # v3.9+
Cc: stable@vger.kernel.org # v3.8.2+
Cc: stable@vger.kernel.org # v3.4.60+
Cc: stable@vger.kernel.org # v3.2.40+
After all IEEE 1394 high-level drivers being converted to bus-specific
.probe/.remove methods, remove support of the obsolete generic methods.
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
FireWire upper layer drivers are converted from generic
struct driver.probe() and .remove()
to bus-specific
struct fw_driver.probe() and .remove().
The new .probe() adds a const struct ieee1394_device_id *id argument,
indicating the entry in the driver's device identifiers table which
matched the fw_unit to be probed. This new argument is used by the
snd-firewire-speakers driver to look up device-specific parameters and
methods. There is at least one other FireWire audio driver currently in
development in which this will be useful too.
The new .remove() drops the unused error return code.
Although all in-tree drivers are being converted to the new methods,
support for the old methods is left in place in this commit. This
allows public developer trees to merge this commit and then move to the
new fw_driver methods.
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Acked-by: Clemens Ladisch <clemens@ladisch.de> (for sound/firewire/)
Cc: Peter Hurley <peter@hurleysoftware.com> (for drivers/staging/fwserial/)
Convert to the much saner new idr interface.
v2: Stefan pointed out that add_client_resource() may be called from
non-process context. Preload iff @gfp_mask contains __GFP_WAIT.
Also updated to include minor upper limit check.
[tim.gardner@canonical.com: fix accidentally orphaned 'minor'[
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
