The RZ DMA controller is used across multiple Renesas SoCs, not only
RZ/A1 (R7S72100) and RZ/G2L. Limiting the build to these SoCs prevents
enabling the driver on newer platforms such as RZ/V2H(P) and RZ/V2N.
Replace the ARCH_R7S72100 || ARCH_RZG2L dependency with ARCH_RENESAS so
the driver can be built for all Renesas SoCs.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Convert the Renesas R-Car DMA Controller driver from
SET_NOIRQ_SYSTEM_SLEEP_PM_OPS() and SET_RUNTIME_PM_OPS() to
NOIRQ_SYSTEM_SLEEP_PM_OPS(), RUNTIME_PM_OPS(), and pm_ptr(). This lets
us drop the check for CONFIG_PM, and reduces kernel size in case
CONFIG_PM is disabled, while increasing build coverage.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Since commit 63d00be693 ("PM: runtime: Allow unassigned
->runtime_suspend|resume callbacks"), unassigned
.runtime_{suspend,resume}() callbacks are treated the same as dummy
callbacks that just return zero.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Convert the Renesas USB-DMA Controller driver from
SET_NOIRQ_SYSTEM_SLEEP_PM_OPS() and SET_RUNTIME_PM_OPS() to
NOIRQ_SYSTEM_SLEEP_PM_OPS(), RUNTIME_PM_OPS(), and pm_ptr(). This lets
us drop the check for CONFIG_PM, and reduces kernel size in case
CONFIG_PM is disabled, while increasing build coverage.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This patch modifies the type of setup_xref from void to int and handles
errors since the function can fail.
`setup_xref` now returns the (eventual) error from
`dmae_set_dmars`|`dmae_set_chcr`, while `shdma_tx_submit` handles the
result, removing the chunks from the queue and marking PM as idle in
case of an error.
Signed-off-by: Thomas Andreatta <thomas.andreatta2000@gmail.com>
Link: https://lore.kernel.org/r/20250827152442.90962-1-thomas.andreatta2000@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The DMAC IP found on the Renesas RZ/V2H(P) family of SoCs is
similar to the version found on the Renesas RZ/G2L family of
SoCs, but there are some differences:
* It only uses one register area
* It only uses one clock
* It only uses one reset
* Instead of using MID/IRD it uses REQ No
* It is connected to the Interrupt Control Unit (ICU)
* On the RZ/G2L there is only 1 DMAC, on the RZ/V2H(P) there are 5
Add specific support for the Renesas RZ/V2H(P) family of SoC by
tackling the aforementioned differences.
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20250423143422.3747702-6-fabrizio.castro.jz@renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Correctly spelled comments make it easier for the reader to understand
the code.
Replace 'enngine' with 'engine' in the comment &
replace 'trascatioin' with 'transaction' in the comment &
replace 'descripter' with 'descriptor' in the comment &
replace 'descritpor' with 'descriptor' in the comment &
replace 'rgisters' with 'registers' in the comment.
Signed-off-by: Yan Zhen <yanzhen@vivo.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20240918034114.860132-1-yanzhen@vivo.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/dma after the previous
conversion commits apart from the wireless drivers to use .remove(),
with the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20241004062227.187726-2-u.kleine-koenig@baylibre.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Pull dmaengine updates from Vinod Koul:
"Unusually, more new driver and device support than updates. Couple of
new device support, AMD, Rcar, Intel and New drivers in Freescale,
Loonsoon, AMD and LPC32XX with DT conversion and mode updates etc.
New support:
- Support for AMD Versal Gen 2 DMA IP
- Rcar RZ/G3S SoC dma controller
- Support for Intel Diamond Rapids and Granite Rapids-D dma controllers
- Support for Freescale ls1021a-qdma controller
- New driver for Loongson-1 APB DMA
- New driver for AMD QDMA
- Pl08x in LPC32XX router dma driver
Updates:
- Support for dpdma cyclic dma mode
- XML conversion for marvell xor dma bindings
- Dma clocks documentation for imx dma"
* tag 'dmaengine-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (24 commits)
dmaengine: loongson1-apb-dma: Fix the build warning caused by the size of pdev_irqname
dmaengine: Fix spelling mistakes
dmaengine: Add dma router for pl08x in LPC32XX SoC
dmaengine: fsl-edma: add edma src ID check at request channel
dmaengine: fsl-edma: change to guard(mutex) within fsl_edma3_xlate()
dmaengine: avoid non-constant format string
dmaengine: imx-dma: Remove i.MX21 support
dt-bindings: dma: fsl,imx-dma: Document the DMA clocks
dmaengine: Loongson1: Add Loongson-1 APB DMA driver
dt-bindings: dma: Add Loongson-1 APB DMA
dmaengine: zynqmp_dma: Add support for AMD Versal Gen 2 DMA IP
dt-bindings: dmaengine: zynqmp_dma: Add a new compatible string
dmaengine: idxd: Add new DSA and IAA device IDs for Diamond Rapids platform
dmaengine: idxd: Add a new DSA device ID for Granite Rapids-D platform
dmaengine: ti: k3-udma: Remove unused declarations
dmaengine: amd: qdma: Add AMD QDMA driver
dmaengine: xilinx: dpdma: Add support for cyclic dma mode
dma: ipu: Remove include/linux/dma/ipu-dma.h
dt-bindings: dma: fsl-mxs-dma: Add compatible string "fsl,imx8qxp-dma-apbh"
dt-bindings: fsl-qdma: allow compatible string fallback to fsl,ls1021a-qdma
...
A NULL dev->dma_parms indicates either a bus that is not DMA capable or
grave bug in the implementation of the bus code.
There isn't much the driver can do in terms of error handling for either
case, so just warn and continue as DMA operations will fail anyway.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
We seem to have hit warnings of 'output may be truncated' which is fixed
by increasing the size of 'dev_id'
drivers/dma/sh/shdmac.c: In function ‘sh_dmae_probe’:
drivers/dma/sh/shdmac.c:541:34: error: ‘%d’ directive output may be truncated writing between 1 and 10 bytes into a region of size 9 [-Werror=format-truncation=]
541 | "sh-dmae%d.%d", pdev->id, id);
| ^~
In function ‘sh_dmae_chan_probe’,
inlined from ‘sh_dmae_probe’ at drivers/dma/sh/shdmac.c:845:9:
drivers/dma/sh/shdmac.c:541:26: note: directive argument in the range [0, 2147483647]
541 | "sh-dmae%d.%d", pdev->id, id);
| ^~~~~~~~~~~~~~
drivers/dma/sh/shdmac.c:541:26: note: directive argument in the range [0, 19]
drivers/dma/sh/shdmac.c:540:17: note: ‘snprintf’ output between 11 and 21 bytes into a destination of size 16
540 | snprintf(sh_chan->dev_id, sizeof(sh_chan->dev_id),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
541 | "sh-dmae%d.%d", pdev->id, id);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Vinod Koul <vkoul@kernel.org>
gcc points out that the fix-byte buffer might be too small:
drivers/dma/sh/usb-dmac.c: In function 'usb_dmac_probe':
drivers/dma/sh/usb-dmac.c:720:34: warning: '%u' directive writing between 1 and 10 bytes into a region of size 3 [-Wformat-overflow=]
720 | sprintf(pdev_irqname, "ch%u", index);
| ^~
In function 'usb_dmac_chan_probe',
inlined from 'usb_dmac_probe' at drivers/dma/sh/usb-dmac.c:814:9:
drivers/dma/sh/usb-dmac.c:720:31: note: directive argument in the range [0, 4294967294]
720 | sprintf(pdev_irqname, "ch%u", index);
| ^~~~~~
drivers/dma/sh/usb-dmac.c:720:9: note: 'sprintf' output between 4 and 13 bytes into a destination of size 5
720 | sprintf(pdev_irqname, "ch%u", index);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Maximum number of channels for USB-DMAC as per the driver is 1-99 so use
u8 instead of unsigned int/int for DMAC channel indexing and make the
pdev_irqname string long enough to avoid the warning.
While at it use scnprintf() instead of sprintf() to make the code more
robust.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240110222210.193479-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The max channel count for RZ DMAC is 16, hence use u8 instead of unsigned
int and make the pdev_irqname string long enough to avoid the warning.
This fixes the below issue:
drivers/dma/sh/rz-dmac.c: In function ‘rz_dmac_probe’:
drivers/dma/sh/rz-dmac.c:770:34: warning: ‘%u’ directive writing between 1 and 10 bytes into a region of size 3 [-Wformat-overflow=]
770 | sprintf(pdev_irqname, "ch%u", index);
| ^~
In function ‘rz_dmac_chan_probe’,
inlined from ‘rz_dmac_probe’ at drivers/dma/sh/rz-dmac.c:910:9:
drivers/dma/sh/rz-dmac.c:770:31: note: directive argument in the range [0, 4294967294]
770 | sprintf(pdev_irqname, "ch%u", index);
| ^~~~~~
drivers/dma/sh/rz-dmac.c:770:9: note: ‘sprintf’ output between 4 and 13 bytes into a destination of size 5
770 | sprintf(pdev_irqname, "ch%u", index);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
While at it use scnprintf() instead of sprintf() to make the code
more robust.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240110222717.193719-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230919133207.1400430-43-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230919133207.1400430-42-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230919133207.1400430-41-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230919133207.1400430-40-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230718143138.1066177-1-robh@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Pull dmaengine updates from Vinod Koul:
"New support:
- Apple admac t8112 device support
- StarFive JH7110 DMA controller
Updates:
- Big pile of idxd updates to support IAA 2.0 device capabilities,
DSA 2.0 Event Log and completion record faulting features and
new DSA operations
- at_xdmac supend & resume updates and driver code cleanup
- k3-udma supend & resume support
- k3-psil thread support for J784s4"
* tag 'dmaengine-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (57 commits)
dmaengine: idxd: add per wq PRS disable
dmaengine: idxd: add pid to exported sysfs attribute for opened file
dmaengine: idxd: expose fault counters to sysfs
dmaengine: idxd: add a device to represent the file opened
dmaengine: idxd: add per file user counters for completion record faults
dmaengine: idxd: process batch descriptor completion record faults
dmaengine: idxd: add descs_completed field for completion record
dmaengine: idxd: process user page faults for completion record
dmaengine: idxd: add idxd_copy_cr() to copy user completion record during page fault handling
dmaengine: idxd: create kmem cache for event log fault items
dmaengine: idxd: add per DSA wq workqueue for processing cr faults
dmanegine: idxd: add debugfs for event log dump
dmaengine: idxd: add interrupt handling for event log
dmaengine: idxd: setup event log configuration
dmaengine: idxd: add event log size sysfs attribute
dmaengine: idxd: make misc interrupt one shot
dt-bindings: dma: snps,dw-axi-dmac: constrain the items of resets for JH7110 dma
dt-bindings: dma: Drop unneeded quotes
dmaengine: at_xdmac: align declaration of ret with the rest of variables
dmaengine: at_xdmac: add a warning message regarding for unpaused channels
...
Since commit 8b41fc4454 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: linux-modules@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: dmaengine@vger.kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
shdma-arm.h was introduced with commit 1e69653d40 ("DMA: shdma: add
r8a73a4 DMAC data to the device ID table"), and its sole user was
removed with commit a19788612f ("dmaengine: sh: Remove R-Mobile APE6
support"). The latter mentions r8a73a4.dtsi but shdma support was
removed from that with commit cfda820377 ("ARM: dts: r8a73a4: Remove
non-functional DMA support"), so it seems this is safe to remove.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20221028115336.1052782-1-steve@sk2.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Some on-chip peripheral modules(for eg:- rspi) on RZ/G2L SoC
use the same signal for both interrupt and DMA transfer requests.
The signal works as a DMA transfer request signal by setting
DMARS, and subsequent interrupt requests to the interrupt controller
are masked.
We can re-enable the interrupt by clearing the DMARS.
This patch adds device_synchronize callback for clearing
DMARS and thereby allowing DMA consumers to switch to
interrupt mode.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20220722084430.969333-1-biju.das.jz@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This reverts commit 455896c53d ("dmaengine: shdma: Fix runtime PM
imbalance on error") as the patch wrongly reduced the count on error and
did not bail out. So drop the count by reverting the patch .
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Don't populate the read-only array ds_lut on the stack but instead it
static. Also makes the object code smaller by 163 bytes:
Before:
text data bss dec hex filename
23508 4796 0 28304 6e90 ./drivers/dma/sh/rz-dmac.o
After:
text data bss dec hex filename
23281 4860 0 28141 6ded ./drivers/dma/sh/rz-dmac.o
(gcc version 11.2.0)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210915112038.12407-1-colin.king@canonical.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
