swp_l4_csum_mode controls how L4 transmit checksums are computed when
using Software Parser (SWP) hints for header locations.
Supported values:
1. default: device will choose between full_csum or l4_only. Driver
will discover the device's choice during initialization.
2. full_csum: calculate L4 checksum with the pseudo-header.
3. l4_only: calculate L4 checksum without the pseudo-header. Only
available when swp_l4_csum_mode_l4_only is set in
mlx5_ifc_nv_sw_offload_cap_bits.
Note that 'default' might be returned from the device and passed to
userspace, and it might also be set during a
devlink_param::reset_default() call, but attempts to set a value of
default directly with param-set will be rejected.
The l4_only setting is a dependency for PSP initialization in
mlx5e_psp_init().
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20251119025038.651131-5-daniel.zahka@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Support querying and resetting to default param values.
Introduce two new devlink netlink attrs:
DEVLINK_ATTR_PARAM_VALUE_DEFAULT and
DEVLINK_ATTR_PARAM_RESET_DEFAULT. The former is used to contain an
optional parameter value inside of the param_value nested
attribute. The latter is used in param-set requests from userspace to
indicate that the driver should reset the param to its default value.
To implement this, two new functions are added to the devlink driver
api: devlink_param::get_default() and
devlink_param::reset_default(). These callbacks allow drivers to
implement default param actions for runtime and permanent cmodes. For
driverinit params, the core latches the last value set by a driver via
devl_param_driverinit_value_set(), and uses that as the default value
for a param.
Because default parameter values are optional, it would be impossible
to discern whether or not a param of type bool has default value of
false or not provided if the default value is encoded using a netlink
flag type. For this reason, when a DEVLINK_PARAM_TYPE_BOOL has an
associated default value, the default value is encoded using a u8
type.
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20251119025038.651131-4-daniel.zahka@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Adds DEVLINK_ESWITCH_MODE_SWITCHDEV_INACTIVE attribute to UAPI and
documentation.
Before having traffic flow through an eswitch, a user may want to have the
ability to block traffic towards the FDB until FDB is fully programmed and
the user is ready to send traffic to it. For example: when two eswitches
are present for vports in a multi-PF setup, one eswitch may take over the
traffic from the other when the user chooses.
Before this take over, a user may want to first program the inactive
eswitch and then once ready redirect traffic to this new eswitch.
switchdev modes transition semantics:
legacy->switchdev_inactive: Create switchdev mode normally, traffic not
allowed to flow yet.
switchdev_inactive->switchdev: Enable traffic to flow.
switchdev->switchdev_inactive: Block traffic on the FDB, FDB and
representros state and content is preserved.
When eswitch is configured to this mode, traffic is ignored/dropped on
this eswitch FDB, while current configuration is kept, e.g FDB rules and
netdev representros are kept available, FDB programming is allowed.
Example:
# start inactive switchdev
devlink dev eswitch set pci/0000:08:00.1 mode switchdev_inactive
# setup TC rules, representors etc ..
# activate
devlink dev eswitch set pci/0000:08:00.1 mode switchdev
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20251108070404.1551708-2-saeed@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently the i40e driver enforces its own internally calculated per-VF MAC
filter limit, derived from the number of allocated VFs and available
hardware resources. This limit is not configurable by the administrator,
which makes it difficult to control how many MAC addresses each VF may
use.
This patch adds support for the new generic devlink runtime parameter
"max_mac_per_vf" which provides administrators with a way to cap the
number of MAC addresses a VF can use:
- When the parameter is set to 0 (default), the driver continues to use
its internally calculated limit.
- When set to a non-zero value, the driver applies this value as a strict
cap for VFs, overriding the internal calculation.
Important notes:
- The configured value is a theoretical maximum. Hardware limits may
still prevent additional MAC addresses from being added, even if the
parameter allows it.
- Since MAC filters are a shared hardware resource across all VFs,
setting a high value may cause resource contention and starve other
VFs.
- This change gives administrators predictable and flexible control over
VF resource allocation, while still respecting hardware limitations.
- Previous discussion about this change:
https://lore.kernel.org/netdev/20250805134042.2604897-2-dhill@redhat.comhttps://lore.kernel.org/netdev/20250823094952.182181-1-mheib@redhat.com
Signed-off-by: Mohammad Heib <mheib@redhat.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add a new device generic parameter to controls the maximum
number of MAC filters allowed per VF.
For example, to limit a VF to 3 MAC addresses:
$ devlink dev param set pci/0000:3b:00.0 name max_mac_per_vf \
value 3 \
cmode runtime
Signed-off-by: Mohammad Heib <mheib@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The devlink param "ts_coarse" doesn't indicate that we get coarse
timestamps, but rather that the PHC clock adjusments are coarse as the
frequency won't be continuously adjusted. Adjust the devlink parameter
name to reflect that.
The Coarse terminlogy comes from the dwmac register naming, update the
documentation to better explain what the parameter is about.
With this change, the parameter can now be adjusted using:
devlink dev param set <dev> name phc_coarse_adj value true cmode runtime
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20251030182454.182406-1-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The DWMAC1000 supports 2 timestamping configurations to configure how
frequency adjustments are made to the ptp_clock, as well as the reported
timestamp values.
There was a previous attempt at upstreaming support for configuring this
mode by Olivier Dautricourt and Julien Beraud a few years back [1]
In a nutshell, the timestamping can be either set in fine mode or in
coarse mode.
In fine mode, which is the default, we use the overflow of an accumulator to
trigger frequency adjustments, but by doing so we lose precision on the
timetamps that are produced by the timestamping unit. The main drawback
is that the sub-second increment value, used to generate timestamps, can't be
set to lower than (2 / ptp_clock_freq).
The "fine" qualification comes from the frequent frequency adjustments we are
able to do, which is perfect for a PTP follower usecase.
In Coarse mode, we don't do frequency adjustments based on an
accumulator overflow. We can therefore have very fine subsecond
increment values, allowing for better timestamping precision. However
this mode works best when the ptp clock frequency is adjusted based on
an external signal, such as a PPS input produced by a GPS clock. This
mode is therefore perfect for a Grand-master usecase.
Introduce a driver-specific devlink parameter "ts_coarse" to enable or
disable coarse mode, keeping the "fine" mode as a default.
This can then be changed with:
devlink dev param set <dev> name ts_coarse value true cmode runtime
The associated documentation is also added.
[1] : https://lore.kernel.org/netdev/20200514102808.31163-1-olivier.dautricourt@orolia.com/
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20251024070720.71174-3-maxime.chevallier@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add three counters to vnic health reporter:
bar_uar_access, odp_local_triggered_page_fault, and
odp_remote_triggered_page_fault.
- bar_uar_access
number of WRITE or READ access operations to the UAR on the PCIe
BAR.
- odp_local_triggered_page_fault
number of locally-triggered page-faults due to ODP.
- odp_remote_triggered_page_fault
number of remotly-triggered page-faults due to ODP.
Example access:
$ devlink health diagnose pci/0000:08:00.0 reporter vnic
vNIC env counters:
total_error_queues: 0 send_queue_priority_update_flow: 0
comp_eq_overrun: 0 async_eq_overrun: 0 cq_overrun: 0
invalid_command: 0 quota_exceeded_command: 0
nic_receive_steering_discard: 0 icm_consumption: 1032
bar_uar_access: 1279 odp_local_triggered_page_fault: 20
odp_remote_triggered_page_fault: 34
Signed-off-by: Akiva Goldberger <agoldberger@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1758797130-829564-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the new devlink param to control how many doorbells mlx5e devices
allocate and use. The maximum number of doorbells configurable is capped
to the maximum number of channels. This only applies to the Ethernet
part, the RDMA devices using mlx5 manage their own doorbells.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some devices support both symmetric (same value for all PFs) and
asymmetric, while others only support symmetric configuration. This
implementation prefers asymmetric, since it is closer to the devlink
model (per function settings), but falls back to symmetric when needed.
Example usage:
devlink dev param set pci/0000:01:00.0 name total_vfs value <u16> cmode permanent
devlink dev reload pci/0000:01:00.0 action fw_activate
echo 1 >/sys/bus/pci/devices/0000:01:00.0/remove
echo 1 >/sys/bus/pci/rescan
cat /sys/bus/pci/devices/0000:01:00.0/sriov_totalvfs
Signed-off-by: Vlad Dumitrescu <vdumitrescu@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Tested-by: Kamal Heib <kheib@redhat.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250907012953.301746-5-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Selects which algorithm should be used by the NIC in order to decide rate of
CQE compression dependeng on PCIe bus conditions.
Supported values:
1) balanced, merges fewer CQEs, resulting in a moderate compression ratio
but maintaining a balance between bandwidth savings and performance
2) aggressive, merges more CQEs into a single entry, achieving a higher
compression rate and maximizing performance, particularly under high
traffic loads.
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250907012953.301746-3-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
NICs are typically configured with total_vfs=0, forcing users to rely
on external tools to enable SR-IOV (a widely used and essential feature).
Add total_vfs parameter to devlink for SR-IOV max VF configurability.
Enables standard kernel tools to manage SR-IOV, addressing the need for
flexible VF configuration.
Signed-off-by: Vlad Dumitrescu <vdumitrescu@nvidia.com>
Tested-by: Kamal Heib <kheib@redhat.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250907012953.301746-2-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enable configuration of the burst period — a time window starting
from the first error recovery, during which the reporter allows
recovery attempts for each reported error.
This feature is helpful when a single underlying issue causes multiple
errors, as it delays the start of the grace period to allow sufficient
time for recovering all related errors. For example, if multiple TX
queues time out simultaneously, a sufficient burst period could allow
all affected TX queues to be recovered within that window. Without this
period, only the first TX queue that reports a timeout will undergo
recovery, while the remaining TX queues will be blocked once the grace
period begins.
Configuration example:
$ devlink health set pci/0000:00:09.0 reporter tx burst_period 500
Configuration example with ynl:
./tools/net/ynl/pyynl/cli.py \
--spec Documentation/netlink/specs/devlink.yaml \
--do health-reporter-set --json '{
"bus-name": "auxiliary",
"dev-name": "mlx5_core.eth.0",
"port-index": 65535,
"health-reporter-name": "tx",
"health-reporter-burst-period": 500
}'
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250824084354.533182-5-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Microchip Azurite ZL3073x represents chip family providing DPLL
and optionally PHC (PTP) functionality. The chips can be connected
be connected over I2C or SPI bus.
They have the following characteristics:
* up to 5 separate DPLL units (channels)
* 5 synthesizers
* 10 input pins (references)
* 10 outputs
* 20 output pins (output pin pair shares one output)
* Each reference and output can operate in either differential or
single-ended mode (differential mode uses 2 pins)
* Each output is connected to one of the synthesizers
* Each synthesizer is driven by one of the DPLL unit
The device uses 7-bit addresses and 8-bits values. It exposes 8-, 16-,
32- and 48-bits registers in address range <0x000,0x77F>. Due to 7bit
addressing, the range is organized into pages of 128 bytes, with each
page containing a page selector register at address 0x7F.
For reading/writing multi-byte registers, the device supports bulk
transfers.
Add basic functionality to access device registers, probe functionality
both I2C and SPI cases and add devlink support to provide info and
to set clock ID parameter.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20250704182202.1641943-6-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce support for specifying relative bandwidth shares between
traffic classes (TC) in the devlink-rate API. This new option allows
users to allocate bandwidth across multiple traffic classes in a
single command.
This feature provides a more granular control over traffic management,
especially for scenarios requiring Enhanced Transmission Selection.
Users can now define a relative bandwidth share for each traffic class.
For example, assigning share values of 20 to TC0 (TCP/UDP) and 80 to TC5
(RoCE) will result in TC0 receiving 20% and TC5 receiving 80% of the
total bandwidth. The actual percentage each class receives depends on
the ratio of its share value to the sum of all shares.
Example:
DEV=pci/0000:08:00.0
$ devlink port function rate add $DEV/vfs_group tx_share 10Gbit \
tx_max 50Gbit tc-bw 0:20 1:0 2:0 3:0 4:0 5:80 6:0 7:0
$ devlink port function rate set $DEV/vfs_group \
tc-bw 0:20 1:0 2:0 3:0 4:0 5:20 6:60 7:0
Example usage with ynl:
./tools/net/ynl/cli.py --spec Documentation/netlink/specs/devlink.yaml \
--do rate-set --json '{
"bus-name": "pci",
"dev-name": "0000:08:00.0",
"port-index": 1,
"rate-tc-bws": [
{"rate-tc-index": 0, "rate-tc-bw": 50},
{"rate-tc-index": 1, "rate-tc-bw": 50},
{"rate-tc-index": 2, "rate-tc-bw": 0},
{"rate-tc-index": 3, "rate-tc-bw": 0},
{"rate-tc-index": 4, "rate-tc-bw": 0},
{"rate-tc-index": 5, "rate-tc-bw": 0},
{"rate-tc-index": 6, "rate-tc-bw": 0},
{"rate-tc-index": 7, "rate-tc-bw": 0}
]
}'
./tools/net/ynl/cli.py --spec Documentation/netlink/specs/devlink.yaml \
--do rate-get --json '{
"bus-name": "pci",
"dev-name": "0000:08:00.0",
"port-index": 1
}'
output for rate-get:
{'bus-name': 'pci',
'dev-name': '0000:08:00.0',
'port-index': 1,
'rate-tc-bws': [{'rate-tc-bw': 50, 'rate-tc-index': 0},
{'rate-tc-bw': 50, 'rate-tc-index': 1},
{'rate-tc-bw': 0, 'rate-tc-index': 2},
{'rate-tc-bw': 0, 'rate-tc-index': 3},
{'rate-tc-bw': 0, 'rate-tc-index': 4},
{'rate-tc-bw': 0, 'rate-tc-index': 5},
{'rate-tc-bw': 0, 'rate-tc-index': 6},
{'rate-tc-bw': 0, 'rate-tc-index': 7}],
'rate-tx-max': 0,
'rate-tx-priority': 0,
'rate-tx-share': 0,
'rate-tx-weight': 0,
'rate-type': 'leaf'}
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250629142138.361537-3-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Provide support for the following devlink cmds:
-DEVLINK_CMD_REGION_GET
-DEVLINK_CMD_REGION_NEW
-DEVLINK_CMD_REGION_DEL
-DEVLINK_CMD_REGION_READ
ixgbe devlink region implementation, similarly to the ice one,
lets user to create snapshots of content of Non Volatile Memory,
content of Shadow RAM, and capabilities of the device.
For both NVM and SRAM regions provide .read() handler to let user
read their contents without the need to create full snapshots.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Co-developed-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Bharath R <bharath.r@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The E610 adapters contain an embedded chip with firmware which can be
updated using devlink flash. The firmware which runs on this chip is
referred to as the Embedded Management Processor firmware (EMP
firmware).
Activating the new firmware image currently requires that the system be
rebooted. This is not ideal as rebooting the system can cause unwanted
downtime.
The EMP firmware itself can be reloaded by issuing a special update
to the device called an Embedded Management Processor reset (EMP
reset). This reset causes the device to reset and reload the EMP
firmware.
Implement support for devlink reload with the "fw_activate" flag. This
allows user space to request the firmware be activated immediately.
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Tested-by: Bharath R <bharath.r@intel.com>
Co-developed-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Co-developed-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
Co-developed-by: Stefan Wegrzyn <stefan.wegrzyn@intel.com>
Signed-off-by: Stefan Wegrzyn <stefan.wegrzyn@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Use the pldmfw library to implement device flash update for
the Intel ixgbe networking device driver specifically for E610 devices.
This support uses the devlink flash update interface.
Using the pldmfw library, the provided firmware file will be scanned for
the three major components, "fw.undi" for the Option ROM, "fw.mgmt" for
the main NVM module containing the primary device firmware, and
"fw.netlist" containing the netlist module.
The flash is separated into two banks, the active bank containing the
running firmware, and the inactive bank which we use for update. Each
module is updated in a staged process. First, the inactive bank is
erased, preparing the device for update. Second, the contents of the
component are copied to the inactive portion of the flash. After all
components are updated, the driver signals the device to switch the
active bank during the next EMP reset.
With this implementation, basic flash update for the E610 hardware is
supported.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Bharath R <bharath.r@intel.com>
Co-developed-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Co-developed-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
Co-developed-by: Stefan Wegrzyn <stefan.wegrzyn@intel.com>
Signed-off-by: Stefan Wegrzyn <stefan.wegrzyn@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
E610 devices give possibility to show more detailed info than the previous
boards.
Extend reporting NVM info with following pieces:
fw.mgmt.api -> version number of the API
fw.mgmt.build -> identifier of the source for the FW
fw.mgmt.srev -> number defining FW's security revision
fw.psid.api -> version defining the format of the flash contents
fw.undi.srev -> number defining OROM's security revision
fw.netlist -> version of the netlist module
fw.netlist.build -> first 4 bytes of the netlist hash
Co-developed-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Co-developed-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Provide devlink .info_get() callback implementation to allow the
driver to report detailed version information. The following info
is reported:
"serial_number" -> The PCI DSN of the adapter
"fw.bundle_id" -> Unique identifier for the combined flash image
"fw.undi" -> Version of the Option ROM containing the UEFI driver
"board.id" -> The PBA ID string
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Tested-by: Bharath R <bharath.r@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add an initial support for devlink interface to ixgbe driver.
Similarly to i40e driver the implementation doesn't enable
devlink to manage device-wide configuration. Devlink instance
is created for each physical function of PCIe device.
Create separate directory for devlink related ixgbe files
and use naming scheme similar to the one used in the ice driver.
Add a stub for Documentation, to be extended by further patches.
Change struct ixgbe_adapter allocation to be done by devlink (Przemek),
as suggested by Jiri.
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Co-developed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Bharath R <bharath.r@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
ICM is a portion of the host's memory assigned to a function by the OS
through requests made by the NIC's firmware.
PF ICM consumption can be accessed directly, while VF/SF ICM consumption
can be accessed through their representors in switchdev mode.
The value is exposed to the user in granularity of 4KB through the vnic
health reporter as follows:
$ devlink health diagnose pci/0000:08:00.0 reporter vnic
vNIC env counters:
total_error_queues: 0 send_queue_priority_update_flow: 0
comp_eq_overrun: 0 async_eq_overrun: 0 cq_overrun: 0
invalid_command: 0 quota_exceeded_command: 0
nic_receive_steering_discard: 0 icm_consumption: 1032
Signed-off-by: Akiva Goldberger <agoldberger@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250209101716.112774-11-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-07-11 (net/intel)
This series contains updates to most Intel network drivers.
Tony removes MODULE_AUTHOR from drivers containing the entry.
Simon Horman corrects a kdoc entry for i40e.
Pawel adds implementation for devlink param "local_forwarding" on ice.
Michal removes unneeded call, and code, for eswitch rebuild for ice.
Sasha removed a no longer used field from igc.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
igc: Remove the internal 'eee_advert' field
ice: remove eswitch rebuild
ice: Add support for devlink local_forwarding param
i40e: correct i40e_addr_to_hkey() name in kdoc
net: intel: Remove MODULE_AUTHORs
====================
Link: https://patch.msgid.link/20240711201932.2019925-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR.
Conflicts:
net/sched/act_ct.c
26488172b0 ("net/sched: Fix UAF when resolving a clash")
3abbd7ed8b ("act_ct: prepare for stolen verdict coming from conntrack and nat engine")
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for driver-specific devlink local_forwarding param.
Supported values are "enabled", "disabled" and "prioritized".
Default configuration is set to "enabled".
Add documentation in networking/devlink/ice.rst.
In previous generations of Intel NICs the transmit scheduler was only
limited by PCIe bandwidth when scheduling/assigning hairpin-bandwidth
between VFs. Changes to E810 HW design introduced scheduler limitation,
so that available hairpin-bandwidth is bound to external port speed.
In order to address this limitation and enable NFV services such as
"service chaining" a knob to adjust the scheduler config was created.
Driver can send a configuration message to the FW over admin queue and
internal FW logic will reconfigure HW to prioritize and add more BW to
VF to VF traffic. An end result, for example, 10G port will no longer
limit hairpin-bandwidth to 10G and much higher speeds can be achieved.
Devlink local_forwarding param set to "prioritized" enables higher
hairpin-bandwitdh on related PFs. Configuration is applicable only to
8x10G and 4x25G cards.
Changing local_forwarding configuration will trigger CORER reset in
order to take effect.
Example command to change current value:
devlink dev param set pci/0000:b2:00.3 name local_forwarding \
value prioritized \
cmode runtime
Co-developed-by: Michal Wilczynski <michal.wilczynski@intel.com>
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Pawel Kaminski <pawel.kaminski@intel.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The existing method of reserving unicast filter count leads to wasted
MCAM entries if the functionality is not used or fewer entries are used.
Furthermore, the amount of MCAM entries differs amongst Octeon SoCs.
We implemented a means to adjust the UC filter count via devlink,
allowing for better use of MCAM entries across Netdev apps.
commands:
To get the current unicast filter count
# devlink dev param show pci/0002:02:00.0 name unicast_filter_count
To change/set the unicast filter count
# devlink dev param set pci/0002:02:00.0 name unicast_filter_count
value 5 cmode runtime
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Newer NIC will introduce a new part number, now add it
into devlink device info.
This patch also updates the information of "board.id" in
nfp.rst to match the devlink-info.rst.
Signed-off-by: Fei Qin <fei.qin@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add definition and documentation for the new generic
info "board.part_number".
The new one is for part number specific use, and board.id
is modified to match the documentation in devlink-info.
Signed-off-by: Fei Qin <fei.qin@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Many devices send event notifications for the IO queues,
such as tx and rx queues, through event queues.
Enable a privileged owner, such as a hypervisor PF, to set the number
of IO event queues for the VF and SF during the provisioning stage.
example:
Get maximum IO event queues of the VF device::
$ devlink port show pci/0000:06:00.0/2
pci/0000:06:00.0/2: type eth netdev enp6s0pf0vf1 flavour pcivf pfnum 0 vfnum 1
function:
hw_addr 00:00:00:00:00:00 ipsec_packet disabled max_io_eqs 10
Set maximum IO event queues of the VF device::
$ devlink port function set pci/0000:06:00.0/2 max_io_eqs 32
$ devlink port show pci/0000:06:00.0/2
pci/0000:06:00.0/2: type eth netdev enp6s0pf0vf1 flavour pcivf pfnum 0 vfnum 1
function:
hw_addr 00:00:00:00:00:00 ipsec_packet disabled max_io_eqs 32
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
