Merge tag 'imx-fixes-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes

i.MX fixes for 5.17:

- Fix sound card model for MBa8Mx board.
- Drop i.MX8MQ LCDIF port node unit-address to fix DTC warning.
- Add missing SD card detect line for imx6qdl-udoo board.
- Remove MX23_PAD_SSP1_DETECT from imx23-evk hog group. It fixes the
  broken SD ard support on the board.
- A couple of fixes from Martin Kepplinger to fix the MIPI_CSI port
  number on i.MX8MQ.
- Re-enable ftm_alarm0 device on ls1028a-kontron-sl28 board which was
  disabled accidentally.
- Fix 'assigned-clocks-parents' typo in i.MX7ULP watchdog device node.
- Disable GPU device on imx8mn-venice-gw7902 board, as it uses
  MIMX8MN5CVTI SoC which does not integrate a GPU.

* tag 'imx-fixes-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  arm64: dts: imx8mq: fix lcdif port node
  arm64: dts: imx8mq-librem5: fix mipi_csi1 port number to sensor
  arm64: dts: imx8mq: fix mipi_csi bidirectional port numbers
  ARM: dts: imx7ulp: Fix 'assigned-clocks-parents' typo
  arm64: dts: ls1028a: sl28: re-enable ftm_alarm0
  arm64: dts: freescale: Fix sound card model for MBa8Mx
  ARM: dts: imx23-evk: Remove MX23_PAD_SSP1_DETECT from hog group
  ARM: dts: imx6qdl-udoo: Properly describe the SD card detect
  arm64: dts: imx8mn-venice-gw7902: disable gpu

Link: https://lore.kernel.org/r/20220129073150.GZ4686@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/boot/dts/imx23-evk.dts

@@ -79,7 +79,6 @@ hog_pins_a: hog@0 {
 						MX23_PAD_LCD_RESET__GPIO_1_18
 						MX23_PAD_PWM3__GPIO_1_29
 						MX23_PAD_PWM4__GPIO_1_30
-						MX23_PAD_SSP1_DETECT__SSP1_DETECT
 					>;
 					fsl,drive-strength = <MXS_DRIVE_4mA>;
 					fsl,voltage = <MXS_VOLTAGE_HIGH>;

arch/arm/boot/dts/imx6qdl-udoo.dtsi

@@ -5,6 +5,8 @@
  * Author: Fabio Estevam <fabio.estevam@freescale.com>
  */
 
+#include <dt-bindings/gpio/gpio.h>
+
 / {
 	aliases {
 		backlight = &backlight;
@@ -226,6 +228,7 @@ MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
 				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
 				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
 				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0
 			>;
 		};
 
@@ -304,7 +307,7 @@ &usbotg {
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
-	non-removable;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 

arch/arm/boot/dts/imx7ulp.dtsi

@@ -259,7 +259,7 @@ wdog1: watchdog@403d0000 {
 			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&pcc2 IMX7ULP_CLK_WDG1>;
 			assigned-clocks = <&pcc2 IMX7ULP_CLK_WDG1>;
-			assigned-clocks-parents = <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>;
+			assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>;
 			timeout-sec = <40>;
 		};
 

arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts

@@ -157,6 +157,10 @@ partition@3e0000 {
 	};
 };
 
+&ftm_alarm0 {
+	status = "okay";
+};
+
 &gpio1 {
 	gpio-line-names =
 		"", "", "", "", "", "", "", "",

arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts

@@ -220,6 +220,10 @@ can@0 {
 	};
 };
 
+&disp_blk_ctrl {
+	status = "disabled";
+};
+
 /* off-board header */
 &ecspi2 {
 	pinctrl-names = "default";
@@ -251,6 +255,10 @@ ethphy0: ethernet-phy@0 {
 	};
 };
 
+&gpu {
+	status = "disabled";
+};
+
 &i2c1 {
 	clock-frequency = <100000>;
 	pinctrl-names = "default";
@@ -546,6 +554,10 @@ &i2c4 {
 	status = "okay";
 };
 
+&pgc_gpumix {
+	status = "disabled";
+};
+
 /* off-board header */
 &sai3 {
 	pinctrl-names = "default";

arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi

@@ -1115,8 +1115,8 @@ &mipi_csi1 {
 	status = "okay";
 
 	ports {
-		port@1 {
-			reg = <1>;
+		port@0 {
+			reg = <0>;
 
 			mipi1_sensor_ep: endpoint {
 				remote-endpoint = <&camera1_ep>;

arch/arm64/boot/dts/freescale/imx8mq.dtsi

@@ -554,7 +554,7 @@ lcdif: lcd-controller@30320000 {
 				assigned-clock-rates = <0>, <0>, <0>, <594000000>;
 				status = "disabled";
 
-				port@0 {
+				port {
 					lcdif_mipi_dsi: endpoint {
 						remote-endpoint = <&mipi_dsi_lcdif_in>;
 					};
@@ -1151,8 +1151,8 @@ ports {
 					#address-cells = <1>;
 					#size-cells = <0>;
 
-					port@0 {
-						reg = <0>;
+					port@1 {
+						reg = <1>;
 
 						csi1_mipi_ep: endpoint {
 							remote-endpoint = <&csi1_ep>;
@@ -1203,8 +1203,8 @@ ports {
 					#address-cells = <1>;
 					#size-cells = <0>;
 
-					port@0 {
-						reg = <0>;
+					port@1 {
+						reg = <1>;
 
 						csi2_mipi_ep: endpoint {
 							remote-endpoint = <&csi2_ep>;

arch/arm64/boot/dts/freescale/mba8mx.dtsi

@@ -91,7 +91,7 @@ reg_vcc_3v3: regulator-3v3 {
 
 	sound {
 		compatible = "fsl,imx-audio-tlv320aic32x4";
-		model = "tqm-tlv320aic32";
+		model = "imx-audio-tlv320aic32x4";
 		ssi-controller = <&sai3>;
 		audio-codec = <&tlv320aic3x04>;
 	};