mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2026-05-01 03:44:27 -04:00
drm/msm/dpu: Bind pingpong block to intf on active ctls in cmd encoder
As per the specification of DPU_CTL_ACTIVE_CFG the configuration of
active blocks should be proactively specified, and the pingpong block is
no different.
The downstream display driver [1] confirms this by also calling
bind_pingpong_blk on CTL_ACTIVE_CFG. Note that this else-if is always
entered, as setup_intf_cfg - unlike this mainline dpu driver that
combines both behind the same function pointer - is left NULL in favour
of using setup_intf_cfg_v1 when CTL_ACTIVE_CFG is set.
This solves continuous timeouts on at least the Qualcomm sm6125 SoC:
[drm:dpu_encoder_frame_done_timeout:2091] [dpu error]enc31 frame done timeout
[drm:_dpu_encoder_phys_cmd_handle_ppdone_timeout.isra.0] *ERROR* id:31 pp:0 kickoff timeout 0 cnt 1 koff_cnt 1
[drm:dpu_encoder_phys_cmd_prepare_for_kickoff] *ERROR* failed wait_for_idle: id:31 ret:-110 pp:0
In the same way this pingpong block should also be unbound followed by
an interface flush when the encoder is disabled, according to the
downstream display driver [2].
[1]: https://source.codeaurora.org/quic/la/platform/vendor/opensource/display-drivers/tree/msm/sde/sde_encoder_phys_cmd.c?h=LA.UM.9.16.r1-08500-MANNAR.0#n167
[2]: https://source.codeaurora.org/quic/la/platform/vendor/opensource/display-drivers/tree/msm/sde/sde_encoder.c?h=LA.UM.9.16.r1-08500-MANNAR.0#n2986
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/475874/
Link: https://lore.kernel.org/r/20220223114011.219044-1-marijn.suijten@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
This commit is contained in:
committed by
Dmitry Baryshkov
parent
1c7b8ed7db
commit
f271d3bfeb
@@ -62,6 +62,13 @@ static void _dpu_encoder_phys_cmd_update_intf_cfg(
|
||||
intf_cfg.stream_sel = cmd_enc->stream_sel;
|
||||
intf_cfg.mode_3d = dpu_encoder_helper_get_3d_blend_mode(phys_enc);
|
||||
ctl->ops.setup_intf_cfg(ctl, &intf_cfg);
|
||||
|
||||
/* setup which pp blk will connect to this intf */
|
||||
if (test_bit(DPU_CTL_ACTIVE_CFG, &ctl->caps->features) && phys_enc->hw_intf->ops.bind_pingpong_blk)
|
||||
phys_enc->hw_intf->ops.bind_pingpong_blk(
|
||||
phys_enc->hw_intf,
|
||||
true,
|
||||
phys_enc->hw_pp->idx);
|
||||
}
|
||||
|
||||
static void dpu_encoder_phys_cmd_pp_tx_done_irq(void *arg, int irq_idx)
|
||||
@@ -498,6 +505,7 @@ static void dpu_encoder_phys_cmd_disable(struct dpu_encoder_phys *phys_enc)
|
||||
{
|
||||
struct dpu_encoder_phys_cmd *cmd_enc =
|
||||
to_dpu_encoder_phys_cmd(phys_enc);
|
||||
struct dpu_hw_ctl *ctl;
|
||||
|
||||
if (!phys_enc->hw_pp) {
|
||||
DPU_ERROR("invalid encoder\n");
|
||||
@@ -514,6 +522,17 @@ static void dpu_encoder_phys_cmd_disable(struct dpu_encoder_phys *phys_enc)
|
||||
|
||||
if (phys_enc->hw_pp->ops.enable_tearcheck)
|
||||
phys_enc->hw_pp->ops.enable_tearcheck(phys_enc->hw_pp, false);
|
||||
|
||||
if (phys_enc->hw_intf->ops.bind_pingpong_blk) {
|
||||
phys_enc->hw_intf->ops.bind_pingpong_blk(
|
||||
phys_enc->hw_intf,
|
||||
false,
|
||||
phys_enc->hw_pp->idx);
|
||||
|
||||
ctl = phys_enc->hw_ctl;
|
||||
ctl->ops.update_pending_flush_intf(ctl, phys_enc->intf_idx);
|
||||
}
|
||||
|
||||
phys_enc->enable_state = DPU_ENC_DISABLED;
|
||||
}
|
||||
|
||||
|
||||
Reference in New Issue
Block a user