mirrors/linux
2
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git synced 2026-07-22 02:17:36 -04:00
Code Issues Packages Projects Releases Wiki Activity

thunderbolt: Increase Notification Timeout to 255 ms for USB4 routers

Browse Source 
Currently we set the Notification Timeout field in ROUTER_CS_4 for USB4
routers to 10 ms, which is unnecessarily short and may cause unnecessary
retransmissions of Hot Plug packets by the router in case of slow
software response.
Increase the timeout to 255 ms, aligning with Thunderbolt 3 routers
and providing adequate time for software to process Hot Plug Events.

While there, fix the comment describing the Notification Timeout
field to match the USB4 specification.

Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
This commit is contained in:
Gil Fine
2026-05-06 15:37:09 +03:00
committed by Mika Westerberg
parent ba2cc38511
commit e24f3c0df4
2 changed files with 4 additions and 11 deletions
Download Patch File Download Diff File Expand all files Collapse all files

12
drivers/thunderbolt/switch.c
View File

@@ -1767,8 +1767,6 @@ int tb_switch_wait_for_bit(struct tb_switch *sw, u32 offset, u32 bit,
/*
* tb_plug_events_active() - enable/disable plug events on a switch
*
* Also configures a sane plug_events_delay of 255ms.
*
* Return: %0 on success, negative errno otherwise.
*/
static int tb_plug_events_active(struct tb_switch *sw, bool active)
@@ -1779,11 +1777,6 @@ static int tb_plug_events_active(struct tb_switch *sw, bool active)
if (tb_switch_is_icm(sw) || tb_switch_is_usb4(sw))
return 0;
sw->config.plug_events_delay = 0xff;
res = tb_sw_write(sw, ((u32 *) &sw->config) + 4, TB_CFG_SWITCH, 4, 1);
if (res)
return res;
res = tb_sw_read(sw, &data, TB_CFG_SWITCH, sw->cap_plug_events + 1, 1);
if (res)
return res;
@@ -2645,6 +2638,8 @@ int tb_switch_configure(struct tb_switch *sw)
sw->config.enabled = 1;
/* Set Notification Timeout to 255 ms for all routers */
sw->config.plug_events_delay = 0xff;
if (tb_switch_is_usb4(sw)) {
/*
* For USB4 devices, we need to program the CM version
@@ -2656,7 +2651,6 @@ int tb_switch_configure(struct tb_switch *sw)
sw->config.cmuv = ROUTER_CS_4_CMUV_V1;
else
sw->config.cmuv = ROUTER_CS_4_CMUV_V2;
sw->config.plug_events_delay = 0xa;
/* Enumerate the switch */
ret = tb_sw_write(sw, (u32 *)&sw->config + 1, TB_CFG_SWITCH,
@@ -2677,7 +2671,7 @@ int tb_switch_configure(struct tb_switch *sw)
/* Enumerate the switch */
ret = tb_sw_write(sw, (u32 *)&sw->config + 1, TB_CFG_SWITCH,
ROUTER_CS_1, 3);
ROUTER_CS_1, 4);
}
if (ret)
return ret;

3
drivers/thunderbolt/tb_regs.h
View File

@@ -182,8 +182,7 @@ struct tb_regs_switch_header {
/* DWORD 4 */
u32 plug_events_delay:8; /*
* RW, pause between plug events in
* milliseconds. Writing 0x00 is interpreted
* as 255ms.
* milliseconds.
*/
u32 cmuv:8;
u32 __unknown4:8;