mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2026-05-05 12:16:29 -04:00
arm64: dts: qcom: msm8939-huawei-kiwi: Add initial device tree
This dts adds support for Huawei Honor 5X / GR5 (2016) smartphone released in 2015. Add device tree with initial support for: - GPIO keys - Hall sensor - SDHCI (internal and external storage) - WCNSS (BT/WIFI) - Sensors (accelerometer and proximity) - Vibrator - Touchscreen Signed-off-by: Raymond Hackley <raymondhackley@protonmail.com> Signed-off-by: Lukas Walter <lukas.walter@aceart.de> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20231021143025.77088-2-lukas.walter@aceart.de Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This commit is contained in:
Lukas Walter
committed by
Bjorn Andersson
Bjorn Andersson
parent
01a3c37391
commit
cff9a76f30
@@ -45,6 +45,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-thwc-uf896.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8916-thwc-ufi001c.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt88047.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8916-yiming-uz801v3.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8939-huawei-kiwi.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8939-longcheer-l9100.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8939-samsung-a7.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8939-sony-xperia-kanuti-tulip.dtb
|
||||
|
||||
242
arch/arm64/boot/dts/qcom/msm8939-huawei-kiwi.dts
Normal file
242
arch/arm64/boot/dts/qcom/msm8939-huawei-kiwi.dts
Normal file
@@ -0,0 +1,242 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-only
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "msm8939-pm8916.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
|
||||
/ {
|
||||
model = "Huawei Honor 5X / GR5 (2016)";
|
||||
compatible = "huawei,kiwi", "qcom,msm8939";
|
||||
chassis-type = "handset";
|
||||
|
||||
aliases {
|
||||
mmc0 = &sdhc_1; /* SDC1 eMMC slot */
|
||||
mmc1 = &sdhc_2; /* SDC2 SD card slot */
|
||||
serial0 = &blsp_uart2;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0";
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
qseecom_mem: qseecom@84a00000 {
|
||||
reg = <0x0 0x84a00000 0x0 0x1600000>;
|
||||
no-map;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-hall-sensor {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
pinctrl-0 = <&gpio_hall_sensor_default>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
label = "GPIO Hall Effect Sensor";
|
||||
|
||||
event-hall-sensor {
|
||||
label = "Hall Effect Sensor";
|
||||
gpios = <&tlmm 69 GPIO_ACTIVE_LOW>;
|
||||
linux,input-type = <EV_SW>;
|
||||
linux,code = <SW_LID>;
|
||||
linux,can-disable;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
pinctrl-0 = <&gpio_keys_default>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
label = "GPIO Buttons";
|
||||
|
||||
button-volume-up {
|
||||
label = "Volume Up";
|
||||
gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_VOLUMEUP>;
|
||||
};
|
||||
};
|
||||
|
||||
usb_id: usb-id {
|
||||
compatible = "linux,extcon-usb-gpio";
|
||||
id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-0 = <&usb_id_default>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
};
|
||||
|
||||
&blsp_i2c2 {
|
||||
status = "okay";
|
||||
|
||||
accelerometer@1e {
|
||||
compatible = "kionix,kx023-1025";
|
||||
reg = <0x1e>;
|
||||
|
||||
vdd-supply = <&pm8916_l17>;
|
||||
vddio-supply = <&pm8916_l6>;
|
||||
pinctrl-0 = <&accel_int_default>;
|
||||
pinctrl-names = "default";
|
||||
mount-matrix = "-1", "0", "0",
|
||||
"0", "1", "0",
|
||||
"0", "0", "1";
|
||||
};
|
||||
|
||||
proximity@39 {
|
||||
compatible = "avago,apds9930";
|
||||
reg = <0x39>;
|
||||
|
||||
interrupt-parent = <&tlmm>;
|
||||
interrupts = <113 IRQ_TYPE_EDGE_FALLING>;
|
||||
|
||||
vdd-supply = <&pm8916_l17>;
|
||||
vddio-supply = <&pm8916_l6>;
|
||||
|
||||
led-max-microamp = <25000>;
|
||||
amstaos,proximity-diodes = <0>;
|
||||
|
||||
pinctrl-0 = <&prox_irq_default>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
};
|
||||
|
||||
&blsp_i2c5 {
|
||||
status = "okay";
|
||||
|
||||
touchscreen@1c {
|
||||
compatible = "cypress,tt21000";
|
||||
|
||||
reg = <0x1c>;
|
||||
interrupt-parent = <&tlmm>;
|
||||
interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
|
||||
|
||||
reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
|
||||
|
||||
/*
|
||||
* NOTE: vdd is not directly supplied by pm8916_l16, it seems to be a
|
||||
* fixed regulator that is automatically enabled by pm8916_l16.
|
||||
*/
|
||||
vdd-supply = <&pm8916_l16>;
|
||||
vddio-supply = <&pm8916_l16>;
|
||||
|
||||
pinctrl-0 = <&touchscreen_default>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
};
|
||||
|
||||
&blsp_uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pm8916_l8 {
|
||||
regulator-min-microvolt = <2950000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
};
|
||||
|
||||
&pm8916_resin {
|
||||
linux,code = <KEY_VOLUMEDOWN>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pm8916_rpm_regulators {
|
||||
pm8916_l16: l16 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
pm8916_l17: l17 {
|
||||
regulator-min-microvolt = <2850000>;
|
||||
regulator-max-microvolt = <2850000>;
|
||||
};
|
||||
};
|
||||
|
||||
&pm8916_vib {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhc_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhc_2 {
|
||||
pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
|
||||
pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
|
||||
pinctrl-names = "default", "sleep";
|
||||
|
||||
cd-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb {
|
||||
extcon = <&usb_id>, <&usb_id>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_hs_phy {
|
||||
extcon = <&usb_id>;
|
||||
};
|
||||
|
||||
&wcnss {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&wcnss_iris {
|
||||
compatible = "qcom,wcn3620";
|
||||
};
|
||||
|
||||
&wcnss_mem {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
accel_int_default: accel-int-default-state {
|
||||
pins = "gpio115";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
gpio_hall_sensor_default: gpio-hall-sensor-default-state {
|
||||
pins = "gpio69";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
gpio_keys_default: gpio-keys-default-state {
|
||||
pins = "gpio107";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
prox_irq_default: prox-irq-default-state {
|
||||
pins = "gpio113";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
sdc2_cd_default: sdc2-cd-default-state {
|
||||
pins = "gpio38";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
touchscreen_default: touchscreen-default-state {
|
||||
pins = "gpio12", "gpio13";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
usb_id_default: usb-id-default-state {
|
||||
pins = "gpio110";
|
||||
function = "gpio";
|
||||
drive-strength = <8>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
Reference in New Issue
Block a user