mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2026-05-23 03:16:27 -04:00
arm64: dts: ti: am62p-verdin: Add mallow
Add support for Verdin AM62P mated with Verdin Mallow carrier board. Link: https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62p Link: https://www.toradex.com/products/carrier-board/mallow-carrier-board Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Link: https://lore.kernel.org/r/20250430102815.149162-5-francesco@dolcini.it Signed-off-by: Nishanth Menon <nm@ti.com>
This commit is contained in:
Francesco Dolcini
committed by
Nishanth Menon
Nishanth Menon
parent
c98ac03937
commit
cfdd38cfeb
@@ -37,8 +37,10 @@ dtb-$(CONFIG_ARCH_K3) += k3-am62a7-phyboard-lyra-rdk.dtb
|
||||
dtb-$(CONFIG_ARCH_K3) += k3-am62p5-sk.dtb
|
||||
dtb-$(CONFIG_ARCH_K3) += k3-am62p5-verdin-nonwifi-dahlia.dtb
|
||||
dtb-$(CONFIG_ARCH_K3) += k3-am62p5-verdin-nonwifi-dev.dtb
|
||||
dtb-$(CONFIG_ARCH_K3) += k3-am62p5-verdin-nonwifi-mallow.dtb
|
||||
dtb-$(CONFIG_ARCH_K3) += k3-am62p5-verdin-wifi-dahlia.dtb
|
||||
dtb-$(CONFIG_ARCH_K3) += k3-am62p5-verdin-wifi-dev.dtb
|
||||
dtb-$(CONFIG_ARCH_K3) += k3-am62p5-verdin-wifi-mallow.dtb
|
||||
|
||||
# Common overlays for SK-AM62* family of boards
|
||||
dtb-$(CONFIG_ARCH_K3) += k3-am62x-sk-csi2-ov5640.dtbo
|
||||
|
||||
213
arch/arm64/boot/dts/ti/k3-am62p-verdin-mallow.dtsi
Normal file
213
arch/arm64/boot/dts/ti/k3-am62p-verdin-mallow.dtsi
Normal file
@@ -0,0 +1,213 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/*
|
||||
* Copyright 2025 Toradex
|
||||
*
|
||||
* Common dtsi for Verdin AM62P SoM on Mallow carrier board
|
||||
*
|
||||
* https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62p
|
||||
* https://www.toradex.com/products/carrier-board/mallow-carrier-board
|
||||
*/
|
||||
|
||||
#include <dt-bindings/leds/common.h>
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
eeprom1 = &carrier_eeprom;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_qspi1_clk_gpio>,
|
||||
<&pinctrl_qspi1_cs_gpio>,
|
||||
<&pinctrl_qspi1_io0_gpio>,
|
||||
<&pinctrl_qspi1_io1_gpio>;
|
||||
|
||||
/* SODIMM 52 - USER_LED_1_RED */
|
||||
led-0 {
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
function = LED_FUNCTION_DEBUG;
|
||||
function-enumerator = <1>;
|
||||
gpios = <&main_gpio0 0 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
/* SODIMM 54 - USER_LED_1_GREEN */
|
||||
led-1 {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_DEBUG;
|
||||
function-enumerator = <1>;
|
||||
gpios = <&main_gpio0 11 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
/* SODIMM 56 - USER_LED_2_RED */
|
||||
led-2 {
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
function = LED_FUNCTION_DEBUG;
|
||||
function-enumerator = <2>;
|
||||
gpios = <&main_gpio0 3 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
/* SODIMM 58 - USER_LED_2_GREEN */
|
||||
led-3 {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_DEBUG;
|
||||
function-enumerator = <2>;
|
||||
gpios = <&main_gpio0 4 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/* Verdin ETHs */
|
||||
&cpsw3g {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* MDIO, shared by Verdin ETH_1 (On-module PHY) and Verdin ETH_2_RGMII */
|
||||
&cpsw3g_mdio {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* Verdin ETH_1 (On-module PHY) */
|
||||
&cpsw_port1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* Verdin PWM_3_DSI */
|
||||
&epwm0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* Verdin PWM_1, PWM_2 */
|
||||
&epwm2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&main_gpio0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pcie_1_reset>,
|
||||
<&pinctrl_gpio_5>,
|
||||
<&pinctrl_gpio_6>,
|
||||
<&pinctrl_gpio_7>,
|
||||
<&pinctrl_gpio_8>;
|
||||
};
|
||||
|
||||
/* Verdin I2C_1 */
|
||||
&main_i2c0 {
|
||||
status = "okay";
|
||||
|
||||
temperature-sensor@4f {
|
||||
compatible = "ti,tmp1075";
|
||||
reg = <0x4f>;
|
||||
};
|
||||
|
||||
carrier_eeprom: eeprom@57 {
|
||||
compatible = "st,24c02", "atmel,24c02";
|
||||
reg = <0x57>;
|
||||
pagesize = <16>;
|
||||
};
|
||||
};
|
||||
|
||||
/* Verdin I2C_2_DSI */
|
||||
&main_i2c1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* Verdin I2C_4_CSI */
|
||||
&main_i2c3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* Verdin CAN_1 */
|
||||
&main_mcan0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* Verdin SPI_1 */
|
||||
&main_spi1 {
|
||||
pinctrl-0 = <&pinctrl_main_spi1>,
|
||||
<&pinctrl_main_spi1_cs0>,
|
||||
<&pinctrl_qspi1_cs2_gpio>;
|
||||
cs-gpios = <0>, <&main_gpio0 12 GPIO_ACTIVE_LOW>;
|
||||
status = "okay";
|
||||
|
||||
tpm@1 {
|
||||
compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
|
||||
reg = <1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_qspi1_dqs_gpio>;
|
||||
interrupt-parent = <&main_gpio0>;
|
||||
interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
|
||||
spi-max-frequency = <18500000>;
|
||||
};
|
||||
};
|
||||
|
||||
/* Verdin UART_3, used as the Linux console */
|
||||
&main_uart0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* Verdin UART_1 */
|
||||
&main_uart1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mcu_gpio0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_gpio_1>,
|
||||
<&pinctrl_gpio_2>,
|
||||
<&pinctrl_gpio_3>,
|
||||
<&pinctrl_gpio_4>;
|
||||
};
|
||||
|
||||
/* Verdin I2C_3_HDMI */
|
||||
&mcu_i2c0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* Verdin CAN_2 */
|
||||
&mcu_mcan0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* Verdin UART_4 */
|
||||
&mcu_uart0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* Verdin SD_1 */
|
||||
&sdhci1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* Verdin USB_1 */
|
||||
&usbss0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* Verdin USB_2 */
|
||||
&usbss1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* Verdin CTRL_WAKE1_MICO# */
|
||||
&verdin_gpio_keys {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* Verdin PCIE_1_RESET# */
|
||||
&verdin_pcie_1_reset_hog {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* Verdin UART_2 */
|
||||
&wkup_uart0 {
|
||||
status = "okay";
|
||||
};
|
||||
22
arch/arm64/boot/dts/ti/k3-am62p5-verdin-nonwifi-mallow.dts
Normal file
22
arch/arm64/boot/dts/ti/k3-am62p5-verdin-nonwifi-mallow.dts
Normal file
@@ -0,0 +1,22 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/*
|
||||
* Copyright 2025 Toradex
|
||||
*
|
||||
* https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62p
|
||||
* https://www.toradex.com/products/carrier-board/mallow-carrier-board
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "k3-am62p5.dtsi"
|
||||
#include "k3-am62p-verdin.dtsi"
|
||||
#include "k3-am62p-verdin-nonwifi.dtsi"
|
||||
#include "k3-am62p-verdin-mallow.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Toradex Verdin AM62P on Mallow Board";
|
||||
compatible = "toradex,verdin-am62p-nonwifi-mallow",
|
||||
"toradex,verdin-am62p-nonwifi",
|
||||
"toradex,verdin-am62p",
|
||||
"ti,am62p5";
|
||||
};
|
||||
22
arch/arm64/boot/dts/ti/k3-am62p5-verdin-wifi-mallow.dts
Normal file
22
arch/arm64/boot/dts/ti/k3-am62p5-verdin-wifi-mallow.dts
Normal file
@@ -0,0 +1,22 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/*
|
||||
* Copyright 2025 Toradex
|
||||
*
|
||||
* https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62p
|
||||
* https://www.toradex.com/products/carrier-board/mallow-carrier-board
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "k3-am62p5.dtsi"
|
||||
#include "k3-am62p-verdin.dtsi"
|
||||
#include "k3-am62p-verdin-wifi.dtsi"
|
||||
#include "k3-am62p-verdin-mallow.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Toradex Verdin AM62P WB on Mallow Board";
|
||||
compatible = "toradex,verdin-am62p-wifi-mallow",
|
||||
"toradex,verdin-am62p-wifi",
|
||||
"toradex,verdin-am62p",
|
||||
"ti,am62p5";
|
||||
};
|
||||
Reference in New Issue
Block a user