mirrors/linux
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git synced 2026-04-29 04:41:21 -04:00
Code Issues Packages Projects Releases Wiki Activity

bnxt_en: Fix occasional ethtool -t loopback test failures

Browse Source 
In the current code, we setup the port to PHY or MAC loopback mode
and then transmit a test broadcast packet for the loopback test.  This
scheme fails sometime if the port is shared with management firmware
that can also send packets.  The driver may receive the management
firmware's packet and the test will fail when the contents don't
match the test packet.

Change the test packet to use it's own MAC address as the destination
and setup the port to only receive it's own MAC address.  This should
filter out other packets sent by management firmware.

Fixes: 91725d89b9 ("bnxt_en: Add PHY loopback to ethtool self-test.")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Michael Chan
2022-02-20 04:05:49 -05:00
committed by David S. Miller
parent 6758f93766
commit cfcab3b3b6
3 changed files with 9 additions and 1 deletions
Download Patch File Download Diff File Expand all files Collapse all files

7
drivers/net/ethernet/broadcom/bnxt/bnxt.c
View File

@@ -8639,6 +8639,9 @@ static int bnxt_init_chip(struct bnxt *bp, bool irq_re_init)
vnic->uc_filter_count = 1;
vnic->rx_mask = 0;
if (test_bit(BNXT_STATE_HALF_OPEN, &bp->state))
goto skip_rx_mask;
if (bp->dev->flags & IFF_BROADCAST)
vnic->rx_mask |= CFA_L2_SET_RX_MASK_REQ_MASK_BCAST;
@@ -8659,6 +8662,7 @@ static int bnxt_init_chip(struct bnxt *bp, bool irq_re_init)
if (rc)
goto err_out;
skip_rx_mask:
rc = bnxt_hwrm_set_coal(bp);
if (rc)
netdev_warn(bp->dev, "HWRM set coalescing failure rc: %x\n",
@@ -10335,8 +10339,10 @@ int bnxt_half_open_nic(struct bnxt *bp)
netdev_err(bp->dev, "bnxt_alloc_mem err: %x\n", rc);
goto half_open_err;
}
set_bit(BNXT_STATE_HALF_OPEN, &bp->state);
rc = bnxt_init_nic(bp, true);
if (rc) {
clear_bit(BNXT_STATE_HALF_OPEN, &bp->state);
netdev_err(bp->dev, "bnxt_init_nic err: %x\n", rc);
goto half_open_err;
}
@@ -10357,6 +10363,7 @@ void bnxt_half_close_nic(struct bnxt *bp)
bnxt_hwrm_resource_free(bp, false, true);
bnxt_free_skbs(bp);
bnxt_free_mem(bp, true);
clear_bit(BNXT_STATE_HALF_OPEN, &bp->state);
}
void bnxt_reenable_sriov(struct bnxt *bp)

1
drivers/net/ethernet/broadcom/bnxt/bnxt.h
View File

@@ -1921,6 +1921,7 @@ struct bnxt {
#define BNXT_STATE_RECOVER 12
#define BNXT_STATE_FW_NON_FATAL_COND 13
#define BNXT_STATE_FW_ACTIVATE_RESET 14
#define BNXT_STATE_HALF_OPEN 15 /* For offline ethtool tests */
#define BNXT_NO_FW_ACCESS(bp) \
(test_bit(BNXT_STATE_FW_FATAL_COND, &(bp)->state) || \

2
drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
View File

@@ -3458,7 +3458,7 @@ static int bnxt_run_loopback(struct bnxt *bp)
if (!skb)
return -ENOMEM;
data = skb_put(skb, pkt_size);
eth_broadcast_addr(data);
ether_addr_copy(&data[i], bp->dev->dev_addr);
i += ETH_ALEN;
ether_addr_copy(&data[i], bp->dev->dev_addr);
i += ETH_ALEN;