arm64: dts: renesas: rzg2l-smarc: Move ssi0 and cpu sound_dai nodes from common dtsi

On RZ/G2{L,LC} SoM module, the wm8978 audio codec is connected to ssi0,
whereas on RZ/G2UL it is connected to ssi1. So move ssi0 and cpu
sound_dai nodes from common dtsi to board specific dtsi.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20220429072400.23729-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

arch/arm64/boot/dts/renesas/r9a07g043u11-smarc.dts

@@ -54,12 +54,6 @@ &spi1 {
 	status = "disabled";
 };
 
-&ssi0 {
-	/delete-property/ pinctrl-0;
-	/delete-property/ pinctrl-names;
-	status = "disabled";
-};
-
 &usb2_phy0 {
 	/delete-property/ pinctrl-0;
 	/delete-property/ pinctrl-names;

arch/arm64/boot/dts/renesas/rz-smarc-common.dtsi

@@ -52,7 +52,6 @@ snd_rzg2l: sound {
 			    "Mic Bias", "Microphone Jack";
 
 		cpu_dai: simple-audio-card,cpu {
-			sound-dai = <&ssi0>;
 		};
 
 		codec_dai: simple-audio-card,codec {
@@ -168,13 +167,6 @@ &spi1 {
 	status = "okay";
 };
 
-&ssi0 {
-	pinctrl-0 = <&ssi0_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
 &usb2_phy0 {
 	pinctrl-0 = <&usb0_pins>;
 	pinctrl-names = "default";

arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi

@@ -18,6 +18,10 @@ aliases {
 	};
 };
 
+&cpu_dai {
+	sound-dai = <&ssi0>;
+};
+
 &i2c3 {
 	pinctrl-0 = <&i2c3_pins>;
 	pinctrl-names = "default";
@@ -49,6 +53,13 @@ &scif2 {
 };
 #endif
 
+&ssi0 {
+	pinctrl-0 = <&ssi0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
 &vccq_sdhi1 {
 	gpios = <&pinctrl RZG2L_GPIO(39, 1) GPIO_ACTIVE_HIGH>;
 };

arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi

@@ -60,6 +60,10 @@ &canfd {
 };
 #endif
 
+&cpu_dai {
+	sound-dai = <&ssi0>;
+};
+
 &i2c2 {
 	pinctrl-0 = <&i2c2_pins>;
 	pinctrl-names = "default";
@@ -91,6 +95,13 @@ &scif1 {
 };
 #endif
 
+&ssi0 {
+	pinctrl-0 = <&ssi0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
 #if (SW_RSPI_CAN)
 &spi1 {
 	/delete-property/ pinctrl-0;