mirrors/linux
2
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git synced 2026-05-14 02:59:19 -04:00
Code Issues Packages Projects Releases Wiki Activity

arm64: dts: mba93xxla: Add USB support

Browse Source 
This adds support for both USB host and USB Type-C ports. This includes
the on-board USB hub.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This commit is contained in:
Alexander Stein
2024-04-23 11:33:40 +02:00
committed by Shawn Guo
parent 7fa676e166
commit ba9943f47d
1 changed files with 61 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

61
arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
View File

@@ -252,6 +252,32 @@ temperature-sensor@1c {
reg = <0x1c>;
};
ptn5110: usb-typec@50 {
compatible = "nxp,ptn5110", "tcpci";
reg = <0x50>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_typec>;
interrupt-parent = <&gpio1>;
interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
connector {
compatible = "usb-c-connector";
label = "X17";
power-role = "dual";
data-role = "dual";
try-power-role = "sink";
typec-power-opmode = "default";
pd-disable;
self-powered;
port {
typec_con_hs: endpoint {
remote-endpoint = <&typec_hs>;
};
};
};
};
eeprom2: eeprom@54 {
compatible = "nxp,se97b", "atmel,24c02";
reg = <0x54>;
@@ -433,6 +459,41 @@ &tpm5 {
pinctrl-0 = <&pinctrl_tpm5>;
};
&usbotg1 {
dr_mode = "otg";
hnp-disable;
srp-disable;
adp-disable;
usb-role-switch;
disable-over-current;
samsung,picophy-pre-emp-curr-control = <3>;
samsung,picophy-dc-vol-level-adjust = <7>;
status = "okay";
port {
typec_hs: endpoint {
remote-endpoint = <&typec_con_hs>;
};
};
};
&usbotg2 {
dr_mode = "host";
#address-cells = <1>;
#size-cells = <0>;
disable-over-current;
samsung,picophy-pre-emp-curr-control = <3>;
samsung,picophy-dc-vol-level-adjust = <7>;
status = "okay";
hub_2_0: hub@1 {
compatible = "usb424,2517";
reg = <1>;
reset-gpios = <&expander1 2 GPIO_ACTIVE_LOW>;
vdd-supply = <&reg_3v3>;
};
};
&usdhc2 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc2_hs>, <&pinctrl_usdhc2_gpio>;