mirrors/linux
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git synced 2026-04-29 09:22:53 -04:00
Code Issues Packages Projects Releases Wiki Activity

Merge tag 'qcom-pinctrl-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into devel

Browse Source 
Qualcomm pinctrl Devicetree bindings changes for v6.4

Cleanup and improvement of the bindings to use "unevaluatedProperties"
instead of "additionalProperties", which allows to accept all the
properties already parsed by referenced common qcom,tlmm-common.yaml
schema.

That common qcom,tlmm-common.yaml binding is going to remove
"input-enable" property, thus using "unevaluatedProperties" allows such
change to propagate to other bindings automatically.
This commit is contained in:
Linus Walleij
2023-04-12 14:21:13 +02:00
parent 86169e657a 152674ab2e
commit b67b3813ab
36 changed files with 36 additions and 362 deletions
Download Patch File Download Diff File Expand all files Collapse all files

11
Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-tlmm.yaml
View File

@@ -56,6 +56,7 @@ $defs:
Pinctrl node's client devices use subnodes for desired pin configuration.
Client device subnodes use below standard properties.
$ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
unevaluatedProperties: false
properties:
pins:
@@ -92,19 +93,9 @@ $defs:
rx1, sdc_data, sdc_clk, sdc_cmd, tsens_max, wci_txd, wci_rxd,
wsi_clk, wsi_clk3, wsi_data, wsi_data3, wsis_reset, xfem ]
bias-pull-down: true
bias-pull-up: true
bias-disable: true
drive-strength: true
input-enable: true
output-high: true
output-low: true
required:
- pins
additionalProperties: false
required:
- compatible
- reg

10
Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml
View File

@@ -43,6 +43,7 @@ $defs:
Pinctrl node's client devices use subnodes for desired pin configuration.
Client device subnodes use below standard properties.
$ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
unevaluatedProperties: false
properties:
pins:
@@ -89,18 +90,9 @@ $defs:
sd_write, sec_mi2s, smb_int, ssbi_wtr0, ssbi_wtr1, uim1, uim2,
uim3, uim_batt, wcss_bt, wcss_fm, wcss_wlan, webcam1_rst ]
bias-pull-down: true
bias-pull-up: true
bias-disable: true
drive-strength: true
output-high: true
output-low: true
required:
- pins
additionalProperties: false
allOf:
- $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#

11
Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.yaml
View File

@@ -53,6 +53,7 @@ $defs:
Pinctrl node's client devices use subnodes for desired pin configuration.
Client device subnodes use below standard properties.
$ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
unevaluatedProperties: false
properties:
pins:
@@ -92,19 +93,9 @@ $defs:
qdss_tracedata_b, qpic, rx0, rx1, rx2, sd_card, sd_write,
tsens_max, wci2a, wci2b, wci2c, wci2d ]
bias-pull-down: true
bias-pull-up: true
bias-disable: true
drive-strength: true
input-enable: true
output-high: true
output-low: true
required:
- pins
additionalProperties: false
allOf:
- $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#

11
Documentation/devicetree/bindings/pinctrl/qcom,mdm9607-tlmm.yaml
View File

@@ -54,6 +54,7 @@ $defs:
Pinctrl node's client devices use subnodes for desired pin configuration.
Client device subnodes use below standard properties.
$ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
unevaluatedProperties: false
properties:
pins:
@@ -105,19 +106,9 @@ $defs:
uim1_clk, uim1_data, uim1_present, uim1_reset, uim2_clk,
uim2_data, uim2_present, uim2_reset, uim_batt, wlan_en1, ]
bias-disable: true
bias-pull-down: true
bias-pull-up: true
drive-strength: true
input-enable: true
output-high: true
output-low: true
required:
- pins
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>

11
Documentation/devicetree/bindings/pinctrl/qcom,mdm9615-pinctrl.yaml
View File

@@ -51,6 +51,7 @@ $defs:
Pinctrl node's client devices use subnodes for desired pin configuration.
Client device subnodes use below standard properties.
$ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
unevaluatedProperties: false
properties:
pins:
@@ -70,19 +71,9 @@ $defs:
enum: [ gpio, gsbi2_i2c, gsbi3, gsbi4, gsbi5_i2c, gsbi5_uart,
sdc2, ebi2_lcdc, ps_hold, prim_audio, sec_audio, cdc_mclk, ]
bias-disable: true
bias-pull-down: true
bias-pull-up: true
drive-strength: true
output-high: true
output-low: true
input-enable: true
required:
- pins
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>

11
Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml
View File

@@ -48,6 +48,7 @@ $defs:
Pinctrl node's client devices use subnodes for desired pin configuration.
Client device subnodes use below standard properties.
$ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
unevaluatedProperties: false
properties:
pins:
@@ -71,19 +72,9 @@ $defs:
blsp_uart3, blsp_uart4, blsp_uart5, cam_mclk0, cam_mclk1,
gp0_clk, gp1_clk, sdc3, wlan ]
bias-pull-down: true
bias-pull-up: true
bias-disable: true
drive-strength: true
input-enable: true
output-high: true
output-low: true
required:
- pins
additionalProperties: false
allOf:
- $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#

12
Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.yaml
View File

@@ -53,6 +53,7 @@ $defs:
Pinctrl node's client devices use subnodes for desired pin configuration.
Client device subnodes use below standard properties.
$ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
unevaluatedProperties: false
properties:
pins:
@@ -81,20 +82,9 @@ $defs:
sdc5, tsif1, tsif2, usb_fs1, usb_fs1_oe_n, usb_fs2,
usb_fs2_oe_n, vfe, vsens_alarm, ebi2, ebi2cs ]
bias-pull-down: true
bias-pull-up: true
bias-disable: true
drive-strength: true
input-enable: true
output-high: true
output-low: true
required:
- pins
additionalProperties: false
allOf:
- $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#

11
Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml
View File

@@ -55,6 +55,7 @@ $defs:
Pinctrl node's client devices use subnodes for desired pin configuration.
Client device subnodes use below standard properties.
$ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
unevaluatedProperties: false
properties:
pins:
@@ -104,19 +105,9 @@ $defs:
uim3_clk, uim3_data, uim3_present, uim3_reset, uim_batt,
wcss_bt, wcss_fm, wcss_wlan ]
bias-disable: true
bias-pull-down: true
bias-pull-up: true
drive-strength: true
input-enable: true
output-high: true
output-low: true
required:
- pins
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>

11
Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.yaml
View File

@@ -53,6 +53,7 @@ $defs:
Pinctrl node's client devices use subnodes for desired pin configuration.
Client device subnodes use below standard properties.
$ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
unevaluatedProperties: false
properties:
pins:
@@ -103,19 +104,9 @@ $defs:
uim1, uim2, uim3, uim_batt, wcss_bt, wcss_fm, wcss_wlan,
webcam1_rst ]
bias-pull-down: true
bias-pull-up: true
bias-disable: true
drive-strength: true
input-enable: true
output-high: true
output-low: true
required:
- pins
additionalProperties: false
allOf:
- $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#

10
Documentation/devicetree/bindings/pinctrl/qcom,msm8953-pinctrl.yaml
View File

@@ -45,6 +45,7 @@ $defs:
Pinctrl node's client devices use subnodes for desired pin configuration.
Client device subnodes use below standard properties.
$ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
unevaluatedProperties: false
properties:
pins:
@@ -106,18 +107,9 @@ $defs:
uim_batt, us_emitter, us_euro, wcss_bt, wcss_fm, wcss_wlan,
wcss_wlan0, wcss_wlan1, wcss_wlan2, wsa_en, wsa_io, wsa_irq ]
bias-pull-down: true
bias-pull-up: true
bias-disable: true
drive-strength: true
output-high: true
output-low: true
required:
- pins
additionalProperties: false
allOf:
- $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#

11
Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.yaml
View File

@@ -53,6 +53,7 @@ $defs:
Pinctrl node's client devices use subnodes for desired pin configuration.
Client device subnodes use below standard properties.
$ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
unevaluatedProperties: false
properties:
pins:
@@ -97,19 +98,9 @@ $defs:
vfe_camif_timer7_a, vfe_camif_timer7_b, vfe_camif_timer7_c,
wlan ]
bias-pull-down: true
bias-pull-up: true
bias-disable: true
drive-strength: true
input-enable: true
output-high: true
output-low: true
required:
- pins
additionalProperties: false
allOf:
- $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#

11
Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.yaml
View File

@@ -53,6 +53,7 @@ $defs:
Pinctrl node's client devices use subnodes for desired pin configuration.
Client device subnodes use below standard properties.
$ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
unevaluatedProperties: false
properties:
pins:
@@ -93,14 +94,6 @@ $defs:
tsif1, tsif2, hsic, grfc, audio_ref_clk, qua_mi2s, pri_mi2s,
spkr_mi2s, ter_mi2s, sec_mi2s, bt, fm, wlan, slimbus, hsic_ctl ]
bias-pull-down: true
bias-pull-up: true
bias-disable: true
drive-strength: true
input-enable: true
output-high: true
output-low: true
required:
- pins
@@ -124,8 +117,6 @@ $defs:
output-high: false
output-low: false
additionalProperties: false
allOf:
- $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#

11
Documentation/devicetree/bindings/pinctrl/qcom,msm8976-pinctrl.yaml
View File

@@ -53,6 +53,7 @@ $defs:
Desired pin configuration for a device or its specific state (like sleep
or active).
$ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
unevaluatedProperties: false
properties:
pins:
@@ -93,19 +94,9 @@ $defs:
wsa_irq, blsp_i2c8, pa_indicator, modem_tsync, ssbi_wtr1,
gsm1_tx, gsm0_tx, sdcard_det, sec_mi2s, ss_switch ]
bias-pull-down: true
bias-pull-up: true
bias-disable: true
drive-strength: true
input-enable: true
output-high: true
output-low: true
required:
- pins
additionalProperties: false
allOf:
- $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#

11
Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.yaml
View File

@@ -55,6 +55,7 @@ $defs:
Pinctrl node's client devices use subnodes for desired pin configuration.
Client device subnodes use below standard properties.
$ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
unevaluatedProperties: false
properties:
pins:
@@ -103,19 +104,9 @@ $defs:
pri_mi2s, sdc4, sec_mi2s, slimbus, spkr_i2s, ter_mi2s, tsif1,
tsif2, uim_batt_alarm, uim1, uim2, uim3, uim4 ]
bias-pull-down: true
bias-pull-up: true
bias-disable: true
drive-strength: true
input-enable: true
output-high: true
output-low: true
required:
- pins
additionalProperties: false
allOf:
- $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#

11
Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.yaml
View File

@@ -53,6 +53,7 @@ $defs:
Pinctrl node's client devices use subnodes for desired pin configuration.
Client device subnodes use below standard properties.
$ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
unevaluatedProperties: false
properties:
pins:
@@ -122,19 +123,9 @@ $defs:
modem_tsync, nav_dr, nav_pps, pci_e1, gsm_tx, qspi_cs, ssbi2,
ssbi1, mss_lte, qspi_clk, qspi0, qspi1, qspi2, qspi3 ]
bias-pull-down: true
bias-pull-up: true
bias-disable: true
drive-strength: true
input-enable: true
output-high: true
output-low: true
required:
- pins
additionalProperties: false
allOf:
- $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#

11
Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.yaml
View File

@@ -53,6 +53,7 @@ $defs:
Pinctrl node's client devices use subnodes for desired pin configuration.
Client device subnodes use below standard properties.
$ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
unevaluatedProperties: false
properties:
pins:
@@ -107,19 +108,9 @@ $defs:
vsense_clkout, vsense_data0, vsense_data1, vsense_mode,
wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1 ]
bias-pull-down: true
bias-pull-up: true
bias-disable: true
drive-strength: true
input-enable: true
output-high: true
output-low: true
required:
- pins
additionalProperties: false
allOf:
- $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#

11
Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.yaml
View File

@@ -59,6 +59,7 @@ $defs:
Pinctrl node's client devices use subnodes for desired pin configuration.
Client device subnodes use below standard properties.
$ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
unevaluatedProperties: false
properties:
pins:
@@ -119,19 +120,9 @@ $defs:
spdifrx_opt, spi_lcd, spkr_dac0, wlan1_adc0, wlan1_adc1,
wlan2_adc0, wlan2_adc1, wsa_en ]
bias-pull-down: true
bias-pull-up: true
bias-disable: true
drive-strength: true
input-enable: true
output-high: true
output-low: true
required:
- pins
additionalProperties: false
allOf:
- $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#

11
Documentation/devicetree/bindings/pinctrl/qcom,qdu1000-tlmm.yaml
View File

@@ -55,6 +55,7 @@ $defs:
Pinctrl node's client devices use subnodes for desired pin configuration.
Client device subnodes use below standard properties.
$ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
unevaluatedProperties: false
properties:
pins:
@@ -93,19 +94,9 @@ $defs:
usb2phy_ac, usb_con_det, usb_dfp_en, usb_phy, vfr_0, vfr_1,
vsense_trigger ]
bias-disable: true
bias-pull-down: true
bias-pull-up: true
drive-strength: true
input-enable: true
output-high: true
output-low: true
required:
- pins
additionalProperties: false
required:
- compatible
- reg

11
Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml
View File

@@ -58,6 +58,7 @@ $defs:
Pinctrl node's client devices use subnodes for desired pin configuration.
Client device subnodes use below standard properties.
$ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
unevaluatedProperties: false
properties:
pins:
@@ -103,19 +104,9 @@ $defs:
tgu_ch2, tgu_ch3, tgu_ch4, tgu_ch5, tsense_pwm1, tsense_pwm2,
tsense_pwm3, tsense_pwm4, usb2phy_ac, vsense_trigger ]
bias-disable: true
bias-pull-down: true
bias-pull-up: true
drive-strength: true
input-enable: true
output-high: true
output-low: true
required:
- pins
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>

11
Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.yaml
View File

@@ -59,6 +59,7 @@ $defs:
Pinctrl node's client devices use subnodes for desired pin configuration.
Client device subnodes use below standard properties.
$ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
unevaluatedProperties: false
properties:
pins:
@@ -100,19 +101,9 @@ $defs:
_V_GPIO, _V_PPS_IN, _V_PPS_OUT, vsense_trigger, wlan1_adc0,
wlan1_adc1, wlan2_adc0, wlan2_adc1 ]
bias-pull-down: true
bias-pull-up: true
bias-disable: true
drive-strength: true
input-enable: true
output-high: true
output-low: true
required:
- pins
additionalProperties: false
allOf:
- $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#

12
Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml
View File

@@ -62,6 +62,7 @@ $defs:
Pinctrl node's client devices use subnodes for desired pin configuration.
Client device subnodes use below standard properties.
$ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
unevaluatedProperties: false
properties:
pins:
@@ -110,20 +111,9 @@ $defs:
uim1_clk, uim1_data, uim1_present, uim1_reset, usb2phy_ac,
usb_phy, vfr_0, vfr_1, vsense_trigger ]
bias-pull-down: true
bias-pull-up: true
bias-bus-hold: true
bias-disable: true
drive-strength: true
input-enable: true
output-high: true
output-low: true
required:
- pins
additionalProperties: false
allOf:
- $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#

11
Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-tlmm.yaml
View File

@@ -62,6 +62,7 @@ $defs:
Pinctrl node's client devices use subnodes for desired pin configuration.
Client device subnodes use below standard properties.
$ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
unevaluatedProperties: false
properties:
pins:
@@ -102,19 +103,9 @@ $defs:
usb0_phy, usb1_phy, usb2phy_ac, vfr_1, vsense_trigger,
wlan1_adc, wlan2_adc, wmss_reset ]
bias-disable: true
bias-pull-down: true
bias-pull-up: true
drive-strength: true
input-enable: true
output-high: true
output-low: true
required:
- pins
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>

11
Documentation/devicetree/bindings/pinctrl/qcom,sdm630-pinctrl.yaml
View File

@@ -65,6 +65,7 @@ $defs:
Pinctrl node's client devices use subnodes for desired pin configuration.
Client device subnodes use below standard properties.
$ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
unevaluatedProperties: false
properties:
pins:
@@ -122,19 +123,9 @@ $defs:
vsense_data0, vsense_data1, vsense_mode, wlan1_adc0,
wlan1_adc1, wlan2_adc0, wlan2_adc1 ]
bias-disable: true
bias-pull-down: true
bias-pull-up: true
drive-strength: true
input-enable: true
output-high: true
output-low: true
required:
- pins
additionalProperties: false
required:
- compatible
- reg

12
Documentation/devicetree/bindings/pinctrl/qcom,sdm670-tlmm.yaml
View File

@@ -58,6 +58,7 @@ $defs:
Pinctrl node's client devices use subnodes for desired pin configuration.
Client device subnodes use below standard properties.
$ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
unevaluatedProperties: false
properties:
pins:
@@ -94,20 +95,9 @@ $defs:
uim1_reset, uim2_clk, uim2_data, uim2_present, uim2_reset, uim_batt, usb_phy, vfr_1,
vsense_trigger, wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1, wsa_clk, wsa_data, ]
bias-disable: true
bias-pull-down: true
bias-pull-up: true
drive-strength: true
input-enable: true
output-high: true
output-low: true
required:
- pins
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>

11
Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.yaml
View File

@@ -61,6 +61,7 @@ $defs:
Pinctrl node's client devices use subnodes for desired pin configuration.
Client device subnodes use below standard properties.
$ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
unevaluatedProperties: false
properties:
pins:
@@ -102,19 +103,9 @@ $defs:
uim_batt, usb_phy, vfr_1, vsense_trigger, wlan1_adc0,
wlan1_adc1, wlan2_adc0, wlan2_adc1]
bias-disable: true
bias-pull-down: true
bias-pull-up: true
drive-strength: true
input-enable: true
output-high: true
output-low: true
required:
- pins
additionalProperties: false
required:
- compatible
- reg

10
Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml
View File

@@ -48,6 +48,7 @@ $defs:
Pinctrl node's client devices use subnodes for desired pin configuration.
Client device subnodes use below standard properties.
$ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
unevaluatedProperties: false
properties:
pins:
@@ -91,18 +92,9 @@ $defs:
uim1_present, uim1_reset, uim2_clk, uim2_data, uim2_present,
uim2_reset, usb2phy_ac, vsense_trigger ]
bias-pull-down: true
bias-pull-up: true
bias-disable: true
drive-strength: true
output-high: true
output-low: true
required:
- pins
additionalProperties: false
allOf:
- $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#

10
Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml
View File

@@ -47,6 +47,7 @@ $defs:
Pinctrl node's client devices use subnodes for desired pin configuration.
Client device subnodes use below standard properties.
$ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
unevaluatedProperties: false
properties:
pins:
@@ -111,18 +112,9 @@ $defs:
qspi_cs, ssbi2, ssbi1, mss_lte, qspi_clk, qspi0, qspi1, qspi2, qspi3,
gpio ]
bias-pull-down: true
bias-pull-up: true
bias-disable: true
drive-strength: true
output-high: true
output-low: true
required:
- pins
additionalProperties: false
allOf:
- $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#

10
Documentation/devicetree/bindings/pinctrl/qcom,sm6115-tlmm.yaml
View File

@@ -53,6 +53,7 @@ $defs:
Pinctrl node's client devices use subnodes for desired pin configuration.
Client device subnodes use below standard properties.
$ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
unevaluatedProperties: false
properties:
pins:
@@ -85,18 +86,9 @@ $defs:
uim2_present, uim2_reset, usb_phy, vfr_1, vsense_trigger,
wlan1_adc0, elan1_adc1 ]
bias-pull-down: true
bias-pull-up: true
bias-disable: true
drive-strength: true
output-high: true
output-low: true
required:
- pins
additionalProperties: false
allOf:
- $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#

11
Documentation/devicetree/bindings/pinctrl/qcom,sm6125-tlmm.yaml
View File

@@ -61,6 +61,7 @@ $defs:
Pinctrl node's client devices use subnodes for desired pin configuration.
Client device subnodes use below standard properties.
$ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
unevaluatedProperties: false
properties:
pins:
@@ -101,19 +102,9 @@ $defs:
wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1, wsa_clk, wsa_data ]
bias-disable: true
bias-pull-down: true
bias-pull-up: true
drive-strength: true
input-enable: true
output-high: true
output-low: true
required:
- pins
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>

12
Documentation/devicetree/bindings/pinctrl/qcom,sm6350-tlmm.yaml
View File

@@ -63,6 +63,7 @@ $defs:
Pinctrl node's client devices use subnodes for desired pin configuration.
Client device subnodes use below standard properties.
$ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
unevaluatedProperties: false
properties:
pins:
@@ -108,20 +109,9 @@ $defs:
uim2_present, uim2_reset, usb_phy, vfr_1, vsense_trigger, wlan1_adc0, wlan1_adc1,
wlan2_adc0, wlan2_adc1, ]
bias-disable: true
bias-pull-down: true
bias-pull-up: true
drive-strength: true
input-enable: true
output-high: true
output-low: true
required:
- pins
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>

12
Documentation/devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml
View File

@@ -55,6 +55,7 @@ $defs:
Pinctrl node's client devices use subnodes for desired pin configuration.
Client device subnodes use below standard properties.
$ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
unevaluatedProperties: false
properties:
pins:
@@ -109,20 +110,9 @@ $defs:
usb_phy, vfr_1, vsense_trigger, wlan1_adc0, wlan1_adc1,
wlan2_adc0, wlan2_adc1 ]
bias-disable: true
bias-pull-down: true
bias-pull-up: true
drive-strength: true
input-enable: true
output-high: true
output-low: true
required:
- pins
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>

11
Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.yaml
View File

@@ -60,6 +60,7 @@ $defs:
Pinctrl node's client devices use subnodes for desired pin configuration.
Client device subnodes use below standard properties.
$ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
unevaluatedProperties: false
properties:
pins:
@@ -101,19 +102,9 @@ $defs:
usb_phy, vfr_1, vsense_trigger, wlan1_adc0, wlan1_adc1,
wlan2_adc0, wlan2_adc1, wmss_reset ]
bias-pull-down: true
bias-pull-up: true
bias-disable: true
drive-strength: true
input-enable: true
output-high: true
output-low: true
required:
- pins
additionalProperties: false
allOf:
- $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#

11
Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
View File

@@ -58,6 +58,7 @@ $defs:
Pinctrl node's client devices use subnodes for desired pin configuration.
Client device subnodes use below standard properties.
$ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
unevaluatedProperties: false
properties:
pins:
@@ -94,19 +95,9 @@ $defs:
tsif0_en, tsif0_error, tsif0_sync, tsif1_clk, tsif1_data, tsif1_en,
tsif1_error, tsif1_sync, usb2phy_ac, usb_phy, vsense_trigger ]
bias-pull-down: true
bias-pull-up: true
bias-disable: true
drive-strength: true
input-enable: true
output-high: true
output-low: true
required:
- pins
additionalProperties: false
allOf:
- $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#

13
Documentation/devicetree/bindings/pinctrl/qcom,sm8350-tlmm.yaml
View File

@@ -62,6 +62,7 @@ $defs:
Pinctrl node's client devices use subnodes for desired pin configuration.
Client device subnodes use below standard properties.
$ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
unevaluatedProperties: false
properties:
pins:
@@ -104,21 +105,9 @@ $defs:
uim0_present, uim0_reset, uim1_clk, uim1_data, uim1_present,
uim1_reset, usb2phy_ac, usb_phy, vfr_0, vfr_1, vsense_trigger ]
bias-disable: true
bias-pull-down: true
bias-pull-up: true
drive-strength: true
input-disable: true
input-enable: true
output-high: true
output-low: true
required:
- pins
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>

11
Documentation/devicetree/bindings/pinctrl/qcom,sm8450-tlmm.yaml
View File

@@ -62,6 +62,7 @@ $defs:
Pinctrl node's client devices use subnodes for desired pin configuration.
Client device subnodes use below standard properties.
$ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
unevaluatedProperties: false
properties:
pins:
@@ -103,19 +104,9 @@ $defs:
uim0_reset, uim1_clk, uim1_data, uim1_present, uim1_reset,
usb2phy_ac, usb_phy, vfr_0, vfr_1, vsense_trigger ]
bias-disable: true
bias-pull-down: true
bias-pull-up: true
drive-strength: true
input-enable: true
output-high: true
output-low: true
required:
- pins
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>

11
Documentation/devicetree/bindings/pinctrl/qcom,sm8550-tlmm.yaml
View File

@@ -54,6 +54,7 @@ $defs:
Pinctrl node's client devices use subnodes for desired pin configuration.
Client device subnodes use below standard properties.
$ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
unevaluatedProperties: false
properties:
pins:
@@ -109,19 +110,9 @@ $defs:
uim1_clk, uim1_data, uim1_present, uim1_reset,
usb1_hs, usb_phy, vfr_0, vfr_1, vsense_trigger_mirnat ]
bias-disable: true
bias-pull-down: true
bias-pull-up: true
drive-strength: true
input-enable: true
output-high: true
output-low: true
required:
- pins
additionalProperties: false
required:
- compatible
- reg