mirrors/linux
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git synced 2026-01-05 14:11:55 -05:00
Code Issues Packages Projects Releases Wiki Activity

pinctrl: sirf: put gpio interrupt pin into input status automatically

Browse Source 
busses like i2c, spi and so on can parse the virq of their subnode automatically by
irq_of_parse_and_map(). for example, i2c will do that in of_i2c_register_devices().
people can put hwirq number attached to a gpio controller in dts, and drivers can
directly request the parsed virq.

for example, for an i2c client as below,
tangoc-ts@5c{
	compatible = "pixcir,tangoc-ts";
	interrupt-parent = <&gpio>;
	interrupts = <3 0>;
	reg = <0x5c>;
};
in i2c client probe(), it will request_irq(client->irq, ...) without
calling gpio_direction_input().
so here when we set irq type, we also put the pin to input direction.

Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This commit is contained in:
Barry Song
2014-01-11 16:48:43 +08:00
committed by Linus Walleij
parent 8daeffb058
commit b07ddcdcb2
1 changed files with 1 additions and 1 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
drivers/pinctrl/sirf/pinctrl-sirf.c
View File

@@ -560,7 +560,7 @@ static int sirfsoc_gpio_irq_type(struct irq_data *d, unsigned type)
spin_lock_irqsave(&sgpio_lock, flags);
val = readl(bank->chip.regs + offset);
val &= ~SIRFSOC_GPIO_CTL_INTR_STS_MASK;
val &= ~(SIRFSOC_GPIO_CTL_INTR_STS_MASK | SIRFSOC_GPIO_CTL_OUT_EN_MASK);
switch (type) {
case IRQ_TYPE_NONE: