Merge tag 'mvebu-dt-4.17-1' of git://git.infradead.org/linux-mvebu into next/dt

Pull "mvebu dt for 4.17 (part 1)" from Gregory CLEMENT:

Most of them are small fixes or cleanup.

Only the change on the clearfog will have a noticeable effect allowing
to use the i2c at an higher frequency.

* tag 'mvebu-dt-4.17-1' of git://git.infradead.org/linux-mvebu:
  ARM: dts: armada388-clearfog: increase speed of i2c0 to 400kHz
  arm: dts: kirkwood: fix error in #sound-dai-cells size
  ARM: dts: kirkwood: Fix "debounce-interval" property misspelling
  ARM: dts: armada: netgear-rn*: fix rtc node name

arch/arm/boot/dts/armada-370-netgear-rn102.dts

@@ -103,7 +103,7 @@ i2c@11000 {
 
 				status = "okay";
 
-				isl12057: isl12057@68 {
+				isl12057: rtc@68 {
 					compatible = "isil,isl12057";
 					reg = <0x68>;
 					wakeup-source;

arch/arm/boot/dts/armada-370-netgear-rn104.dts

@@ -105,7 +105,7 @@ i2c@11000 {
 
 				status = "okay";
 
-				isl12057: isl12057@68 {
+				isl12057: rtc@68 {
 					compatible = "isil,isl12057";
 					reg = <0x68>;
 					wakeup-source;

arch/arm/boot/dts/armada-388-clearfog.dtsi

@@ -143,8 +143,7 @@ fixed-link {
 };
 
 &i2c0 {
-	/* Is there anything on this? */
-	clock-frequency = <100000>;
+	clock-frequency = <400000>;
 	pinctrl-0 = <&i2c0_pins>;
 	pinctrl-names = "default";
 	status = "okay";
@@ -239,13 +238,11 @@ sfp_mod_def0 {
 		};
 	};
 
-	/* The MCP3021 is 100kHz clock only */
+	/* The MCP3021 supports standard and fast modes */
 	mikrobus_adc: mcp3021@4c {
 		compatible = "microchip,mcp3021";
 		reg = <0x4c>;
 	};
-
-	/* Also something at 0x64 */
 };
 
 &i2c1 {

arch/arm/boot/dts/armada-xp-netgear-rn2120.dts

@@ -115,7 +115,7 @@ g751: g751@4c {
 					reg = <0x4c>;
 				};
 
-				isl12057: isl12057@68 {
+				isl12057: rtc@68 {
 					compatible = "isil,isl12057";
 					reg = <0x68>;
 					wakeup-source;

arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts

@@ -35,7 +35,7 @@ gpio_keys {
 		pinctrl-names = "default";
 
 		eject {
-			debounce_interval = <50>;
+			debounce-interval = <50>;
 			wakeup-source;
 			linux,code = <KEY_EJECTCD>;
 			label = "Eject Button";

arch/arm/boot/dts/kirkwood.dtsi

@@ -382,7 +382,7 @@ sata_phy1: sata-phy@84000 {
 
 		audio0: audio-controller@a0000 {
 			compatible = "marvell,kirkwood-audio";
-			#sound-dai-cells = <1>;
+			#sound-dai-cells = <0>;
 			reg = <0xa0000 0x2210>;
 			interrupts = <24>;
 			clocks = <&gate_clk 9>;