mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2026-05-02 18:04:38 -04:00
Merge tag 'amlogic-arm64-dt-for-v6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/dt
Amlogic ARM64 DT changes for v6.4: - set of DT bindings check fixes - adjust order of some compatibles to match dt-schema migration - add support for BananaPi M2S variants - gxbb-kii-pro: add audio & bluetooth support - meson-a1: add gpio_intc node - gxl: use gxl mdio multiplexer - Add initial support for BPI-CM4 module with BPI-CM4IO baseboard * tag 'amlogic-arm64-dt-for-v6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: arm64: dts: amlogic: Add initial support for BPI-CM4 module with BPI-CM4IO baseboard dt-bindings: arm: amlogic: Document the boards with the BPI-CM4 connected arm64: dts: amlogic: gxl: use gxl mdio multiplexer arm64: dts: meson-a1: add gpio_intc node arm64: dts: meson: gxbb-kii-pro: add initial audio support arm64: dts: meson: gxbb-kii-pro: complete the bluetooth node arm64: dts: meson: gxbb-kii-pro: sort and tidy the dts arm64: dts: meson: adjust order of some compatibles arm64: dts: meson: add support for BananaPi M2S variants dt-bindings: arm: amlogic: add support for BananaPi M2S variants arm64: dts: amlogic: meson-gxm-s912-libretech-pc: remove unused pinctrl-names from phy node arm64: dts: amlogic: meson-sm1: use correct enable-gpios arm64: dts: amlogic: meson-s4: fix apb4 bus node name arm64: dts: amlogic: meson-g12b-odroid-go-ultra: rename keypad-gpio pinctrl node arm64: dts: amlogic: meson-g12b-radxa-zero2: fix pwm clock names arm64: dts: amlogic: meson-axg-jethome-jethub-j1xx: remove invalid #gpio-cells in onewire node arm64: dts: amlogic: meson-gxm-s912-libretech-pc: add simple connector node in fusb302 node arm64: dts: amlogic: meson-sm1-bananapi: correct usb-hub hog node name Link: https://lore.kernel.org/r/1b955bb7-1a35-8d67-beb6-dd289533ff6f@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This commit is contained in:
Arnd Bergmann
@@ -153,17 +153,27 @@ properties:
|
||||
- description: Boards with the Amlogic Meson G12B A311D SoC
|
||||
items:
|
||||
- enum:
|
||||
- bananapi,bpi-m2s
|
||||
- khadas,vim3
|
||||
- radxa,zero2
|
||||
- const: amlogic,a311d
|
||||
- const: amlogic,g12b
|
||||
|
||||
- description: Boards using the BPI-CM4 module with Amlogic Meson G12B A311D SoC
|
||||
items:
|
||||
- enum:
|
||||
- bananapi,bpi-cm4io
|
||||
- const: bananapi,bpi-cm4
|
||||
- const: amlogic,a311d
|
||||
- const: amlogic,g12b
|
||||
|
||||
- description: Boards with the Amlogic Meson G12B S922X SoC
|
||||
items:
|
||||
- enum:
|
||||
- azw,gsking-x
|
||||
- azw,gtking
|
||||
- azw,gtking-pro
|
||||
- bananapi,bpi-m2s
|
||||
- hardkernel,odroid-go-ultra
|
||||
- hardkernel,odroid-n2
|
||||
- hardkernel,odroid-n2l
|
||||
|
||||
@@ -8,7 +8,9 @@ dtb-$(CONFIG_ARCH_MESON) += meson-g12a-radxa-zero.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-g12a-sei510.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-g12a-u200.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-g12a-x96-max.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-bananapi-m2s.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-khadas-vim3.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-bananapi-cm4-cm4io.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gsking-x.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking-pro.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking.dtb
|
||||
@@ -17,6 +19,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2-plus.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2l.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-radxa-zero2.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-s922x-bananapi-m2s.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-s922x-khadas-vim3.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-ugoos-am6.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-kii-pro.dtb
|
||||
|
||||
@@ -125,6 +125,16 @@ uart_AO_B: serial@2000 {
|
||||
clock-names = "xtal", "pclk", "baud";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
gpio_intc: interrupt-controller@0440 {
|
||||
compatible = "amlogic,meson-a1-gpio-intc",
|
||||
"amlogic,meson-gpio-intc";
|
||||
reg = <0x0 0x0440 0x0 0x14>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
amlogic,channel-interrupts =
|
||||
<49 50 51 52 53 54 55 56>;
|
||||
};
|
||||
};
|
||||
|
||||
gic: interrupt-controller@ff901000 {
|
||||
|
||||
@@ -159,7 +159,6 @@ map1 {
|
||||
onewire {
|
||||
compatible = "w1-gpio";
|
||||
gpios = <&gpio GPIOA_14 GPIO_ACTIVE_HIGH>;
|
||||
#gpio-cells = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
@@ -0,0 +1,37 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2023 Christian Hewitt <christianshewitt@gmail.com>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "meson-g12b-a311d.dtsi"
|
||||
#include "meson-g12b-bananapi.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "bananapi,bpi-m2s", "amlogic,a311d", "amlogic,g12b";
|
||||
model = "BananaPi M2S";
|
||||
|
||||
aliases {
|
||||
i2c0 = &i2c1;
|
||||
i2c1 = &i2c3;
|
||||
};
|
||||
};
|
||||
|
||||
/* Camera (CSI) bus */
|
||||
&i2c1 {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&i2c1_sda_h6_pins>, <&i2c1_sck_h7_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
/* Display (DSI) bus */
|
||||
&i2c3 {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&npu {
|
||||
status = "okay";
|
||||
};
|
||||
165
arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-cm4io.dts
Normal file
165
arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-cm4io.dts
Normal file
@@ -0,0 +1,165 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2023 Neil Armstrong <neil.armstrong@linaro.org>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "meson-g12b-bananapi-cm4.dtsi"
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
|
||||
|
||||
/ {
|
||||
compatible = "bananapi,bpi-cm4io", "bananapi,bpi-cm4", "amlogic,a311d", "amlogic,g12b";
|
||||
model = "BananaPi BPI-CM4IO Baseboard with BPI-CM4 Module";
|
||||
|
||||
aliases {
|
||||
ethernet0 = ðmac;
|
||||
i2c0 = &i2c1;
|
||||
i2c1 = &i2c3;
|
||||
};
|
||||
|
||||
adc-keys {
|
||||
compatible = "adc-keys";
|
||||
io-channels = <&saradc 2>;
|
||||
io-channel-names = "buttons";
|
||||
keyup-threshold-microvolt = <1710000>;
|
||||
|
||||
button-function {
|
||||
label = "Function";
|
||||
linux,code = <KEY_FN>;
|
||||
press-threshold-microvolt = <10000>;
|
||||
};
|
||||
};
|
||||
|
||||
hdmi_connector: hdmi-connector {
|
||||
compatible = "hdmi-connector";
|
||||
type = "a";
|
||||
|
||||
port {
|
||||
hdmi_connector_in: endpoint {
|
||||
remote-endpoint = <&hdmi_tx_tmds_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led-blue {
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
|
||||
led-green {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
sound {
|
||||
compatible = "amlogic,axg-sound-card";
|
||||
model = "BPI-CM4IO";
|
||||
audio-aux-devs = <&tdmout_b>;
|
||||
audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
|
||||
"TDMOUT_B IN 1", "FRDDR_B OUT 1",
|
||||
"TDMOUT_B IN 2", "FRDDR_C OUT 1",
|
||||
"TDM_B Playback", "TDMOUT_B OUT";
|
||||
|
||||
assigned-clocks = <&clkc CLKID_MPLL2>,
|
||||
<&clkc CLKID_MPLL0>,
|
||||
<&clkc CLKID_MPLL1>;
|
||||
assigned-clock-parents = <0>, <0>, <0>;
|
||||
assigned-clock-rates = <294912000>,
|
||||
<270950400>,
|
||||
<393216000>;
|
||||
|
||||
dai-link-0 {
|
||||
sound-dai = <&frddr_a>;
|
||||
};
|
||||
|
||||
dai-link-1 {
|
||||
sound-dai = <&frddr_b>;
|
||||
};
|
||||
|
||||
dai-link-2 {
|
||||
sound-dai = <&frddr_c>;
|
||||
};
|
||||
|
||||
/* 8ch hdmi interface */
|
||||
dai-link-3 {
|
||||
sound-dai = <&tdmif_b>;
|
||||
dai-format = "i2s";
|
||||
dai-tdm-slot-tx-mask-0 = <1 1>;
|
||||
dai-tdm-slot-tx-mask-1 = <1 1>;
|
||||
dai-tdm-slot-tx-mask-2 = <1 1>;
|
||||
dai-tdm-slot-tx-mask-3 = <1 1>;
|
||||
mclk-fs = <256>;
|
||||
|
||||
codec {
|
||||
sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
|
||||
};
|
||||
};
|
||||
|
||||
/* hdmi glue */
|
||||
dai-link-4 {
|
||||
sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
|
||||
|
||||
codec {
|
||||
sound-dai = <&hdmi_tx>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&cecb_AO {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ðmac {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi_tx {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi_tx_tmds_port {
|
||||
hdmi_tx_tmds_out: endpoint {
|
||||
remote-endpoint = <&hdmi_connector_in>;
|
||||
};
|
||||
};
|
||||
|
||||
/* CSI port */
|
||||
&i2c1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* DSI port for touchscreen */
|
||||
&i2c3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* miniPCIe port with USB + SIM slot */
|
||||
&pcie {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sd_emmc_b {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tohdmitx {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* Peripheral Only USB-C port */
|
||||
&usb {
|
||||
dr_mode = "peripheral";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
388
arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi
Normal file
388
arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi
Normal file
@@ -0,0 +1,388 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2023 Neil Armstrong <neil.armstrong@linaro.org>
|
||||
*/
|
||||
|
||||
#include "meson-g12b-a311d.dtsi"
|
||||
#include <dt-bindings/gpio/meson-g12a-gpio.h>
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
serial0 = &uart_AO;
|
||||
rtc1 = &vrtc;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
emmc_pwrseq: emmc-pwrseq {
|
||||
compatible = "mmc-pwrseq-emmc";
|
||||
reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x0 0x0 0x40000000>;
|
||||
};
|
||||
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
reset-gpios = <&gpio GPIOAO_6 GPIO_ACTIVE_LOW>;
|
||||
clocks = <&wifi32k>;
|
||||
clock-names = "ext_clock";
|
||||
};
|
||||
|
||||
emmc_1v8: regulator-emmc-1v8 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "EMMC_1V8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&vddao_3v3>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
dc_in: regulator-dc-in {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "DC_IN";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vddio_c: regulator-vddio-c {
|
||||
compatible = "regulator-gpio";
|
||||
regulator-name = "VDDIO_C";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
enable-gpio = <&gpio_ao GPIOAO_3 GPIO_OPEN_DRAIN>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
|
||||
gpios = <&gpio_ao GPIOAO_9 GPIO_OPEN_DRAIN>;
|
||||
gpios-states = <1>;
|
||||
|
||||
states = <1800000 0>,
|
||||
<3300000 1>;
|
||||
};
|
||||
|
||||
vddao_1v8: regulator-vddao-1v8 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VDDAO_1V8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&vddao_3v3>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vddao_3v3: regulator-vddao-3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VDDAO_3V3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&dc_in>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vddcpu_a: regulator-vddcpu-a {
|
||||
/*
|
||||
* MP8756GD DC/DC Regulator.
|
||||
*/
|
||||
compatible = "pwm-regulator";
|
||||
|
||||
regulator-name = "VDDCPU_A";
|
||||
regulator-min-microvolt = <680000>;
|
||||
regulator-max-microvolt = <1040000>;
|
||||
|
||||
pwm-supply = <&dc_in>;
|
||||
|
||||
pwms = <&pwm_ab 0 1250 0>;
|
||||
pwm-dutycycle-range = <100 0>;
|
||||
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vddcpu_b: regulator-vddcpu-b {
|
||||
/*
|
||||
* SY8120B1ABC DC/DC Regulator.
|
||||
*/
|
||||
compatible = "pwm-regulator";
|
||||
|
||||
regulator-name = "VDDCPU_B";
|
||||
regulator-min-microvolt = <680000>;
|
||||
regulator-max-microvolt = <1040000>;
|
||||
|
||||
pwm-supply = <&dc_in>;
|
||||
|
||||
pwms = <&pwm_AO_cd 1 1250 0>;
|
||||
pwm-dutycycle-range = <100 0>;
|
||||
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
wifi32k: wifi32k {
|
||||
compatible = "pwm-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <32768>;
|
||||
pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
|
||||
};
|
||||
};
|
||||
|
||||
&arb {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&clkc_audio {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cec_AO {
|
||||
pinctrl-0 = <&cec_ao_a_h_pins>;
|
||||
pinctrl-names = "default";
|
||||
hdmi-phandle = <&hdmi_tx>;
|
||||
};
|
||||
|
||||
&cecb_AO {
|
||||
pinctrl-0 = <&cec_ao_b_h_pins>;
|
||||
pinctrl-names = "default";
|
||||
hdmi-phandle = <&hdmi_tx>;
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <&vddcpu_b>;
|
||||
operating-points-v2 = <&cpu_opp_table_0>;
|
||||
clocks = <&clkc CLKID_CPU_CLK>;
|
||||
clock-latency = <50000>;
|
||||
};
|
||||
|
||||
&cpu1 {
|
||||
cpu-supply = <&vddcpu_b>;
|
||||
operating-points-v2 = <&cpu_opp_table_0>;
|
||||
clocks = <&clkc CLKID_CPU_CLK>;
|
||||
clock-latency = <50000>;
|
||||
};
|
||||
|
||||
&cpu100 {
|
||||
cpu-supply = <&vddcpu_a>;
|
||||
operating-points-v2 = <&cpub_opp_table_1>;
|
||||
clocks = <&clkc CLKID_CPUB_CLK>;
|
||||
clock-latency = <50000>;
|
||||
};
|
||||
|
||||
&cpu101 {
|
||||
cpu-supply = <&vddcpu_a>;
|
||||
operating-points-v2 = <&cpub_opp_table_1>;
|
||||
clocks = <&clkc CLKID_CPUB_CLK>;
|
||||
clock-latency = <50000>;
|
||||
};
|
||||
|
||||
&cpu102 {
|
||||
cpu-supply = <&vddcpu_a>;
|
||||
operating-points-v2 = <&cpub_opp_table_1>;
|
||||
clocks = <&clkc CLKID_CPUB_CLK>;
|
||||
clock-latency = <50000>;
|
||||
};
|
||||
|
||||
&cpu103 {
|
||||
cpu-supply = <&vddcpu_a>;
|
||||
operating-points-v2 = <&cpub_opp_table_1>;
|
||||
clocks = <&clkc CLKID_CPUB_CLK>;
|
||||
clock-latency = <50000>;
|
||||
};
|
||||
|
||||
&ext_mdio {
|
||||
external_phy: ethernet-phy@0 {
|
||||
/* Realtek RTL8211F (0x001cc916) */
|
||||
reg = <0>;
|
||||
max-speed = <1000>;
|
||||
|
||||
interrupt-parent = <&gpio_intc>;
|
||||
/* MAC_INTR on GPIOZ_14 */
|
||||
interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
/* Ethernet to be enabled in baseboard DT */
|
||||
ðmac {
|
||||
pinctrl-0 = <ð_pins>, <ð_rgmii_pins>;
|
||||
pinctrl-names = "default";
|
||||
phy-mode = "rgmii-txid";
|
||||
phy-handle = <&external_phy>;
|
||||
};
|
||||
|
||||
&frddr_a {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&frddr_b {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&frddr_c {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* HDMI to be enabled in baseboard DT */
|
||||
&hdmi_tx {
|
||||
pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
|
||||
pinctrl-names = "default";
|
||||
hdmi-supply = <&dc_in>;
|
||||
};
|
||||
|
||||
/* "Camera" I2C bus */
|
||||
&i2c1 {
|
||||
pinctrl-0 = <&i2c1_sda_h6_pins>, <&i2c1_sck_h7_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
/* Main I2C bus */
|
||||
&i2c2 {
|
||||
pinctrl-0 = <&i2c2_sda_x_pins>, <&i2c2_sck_x_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
/* "ID" I2C bus */
|
||||
&i2c3 {
|
||||
pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&pcie {
|
||||
reset-gpios = <&gpio GPIOA_8 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
&pwm_ab {
|
||||
pinctrl-0 = <&pwm_a_e_pins>;
|
||||
pinctrl-names = "default";
|
||||
clocks = <&xtal>;
|
||||
clock-names = "clkin0";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm_ef {
|
||||
pinctrl-0 = <&pwm_e_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm_AO_cd {
|
||||
pinctrl-0 = <&pwm_ao_d_e_pins>;
|
||||
pinctrl-names = "default";
|
||||
clocks = <&xtal>;
|
||||
clock-names = "clkin1";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
vref-supply = <&vddao_1v8>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* on-module SDIO WiFi */
|
||||
&sd_emmc_a {
|
||||
pinctrl-0 = <&sdio_pins>;
|
||||
pinctrl-1 = <&sdio_clk_gate_pins>;
|
||||
pinctrl-names = "default", "clk-gate";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
bus-width = <4>;
|
||||
sd-uhs-sdr104;
|
||||
max-frequency = <50000000>;
|
||||
|
||||
non-removable;
|
||||
disable-wp;
|
||||
|
||||
/* WiFi firmware requires power in suspend */
|
||||
keep-power-in-suspend;
|
||||
|
||||
mmc-pwrseq = <&sdio_pwrseq>;
|
||||
|
||||
vmmc-supply = <&vddao_3v3>;
|
||||
vqmmc-supply = <&vddao_3v3>;
|
||||
|
||||
status = "okay";
|
||||
|
||||
rtl8822cs: wifi@1 {
|
||||
reg = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
/* SD card to be enabled in baseboard DT */
|
||||
&sd_emmc_b {
|
||||
pinctrl-0 = <&sdcard_c_pins>;
|
||||
pinctrl-1 = <&sdcard_clk_gate_c_pins>;
|
||||
pinctrl-names = "default", "clk-gate";
|
||||
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
max-frequency = <50000000>;
|
||||
disable-wp;
|
||||
|
||||
cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
|
||||
vmmc-supply = <&vddao_3v3>;
|
||||
vqmmc-supply = <&vddio_c>;
|
||||
};
|
||||
|
||||
/* on-module eMMC */
|
||||
&sd_emmc_c {
|
||||
pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
|
||||
pinctrl-1 = <&emmc_clk_gate_pins>;
|
||||
pinctrl-names = "default", "clk-gate";
|
||||
|
||||
bus-width = <8>;
|
||||
cap-mmc-highspeed;
|
||||
mmc-ddr-1_8v;
|
||||
mmc-hs200-1_8v;
|
||||
max-frequency = <200000000>;
|
||||
disable-wp;
|
||||
|
||||
mmc-pwrseq = <&emmc_pwrseq>;
|
||||
vmmc-supply = <&vddao_3v3>;
|
||||
vqmmc-supply = <&vddao_1v8>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tdmif_b {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tdmout_b {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* on-module UART BT */
|
||||
&uart_A {
|
||||
pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
|
||||
pinctrl-names = "default";
|
||||
uart-has-rtscts;
|
||||
|
||||
status = "okay";
|
||||
|
||||
bluetooth {
|
||||
compatible = "realtek,rtl8822cs-bt";
|
||||
enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
|
||||
host-wake-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>;
|
||||
device-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
&uart_AO {
|
||||
pinctrl-0 = <&uart_ao_a_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb {
|
||||
phys = <&usb2_phy0>, <&usb2_phy1>;
|
||||
phy-names = "usb2-phy0", "usb2-phy1";
|
||||
};
|
||||
521
arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi
Normal file
521
arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi
Normal file
@@ -0,0 +1,521 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2019 BayLibre, SAS
|
||||
* Author: Neil Armstrong <narmstrong@baylibre.com>
|
||||
* Copyright (c) 2023 Christian Hewitt <christianshewitt@gmail.com>
|
||||
*/
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/gpio/meson-g12a-gpio.h>
|
||||
#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
serial0 = &uart_AO;
|
||||
ethernet0 = ðmac;
|
||||
rtc1 = &vrtc;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x0 0x0 0x80000000>; /* 2 GiB or 4 GiB */
|
||||
};
|
||||
|
||||
adc-keys {
|
||||
compatible = "adc-keys";
|
||||
io-channels = <&saradc 2>;
|
||||
io-channel-names = "buttons";
|
||||
keyup-threshold-microvolt = <1710000>;
|
||||
|
||||
button-function {
|
||||
label = "RST";
|
||||
linux,code = <KEY_POWER>;
|
||||
press-threshold-microvolt = <10000>;
|
||||
};
|
||||
};
|
||||
|
||||
emmc_pwrseq: emmc-pwrseq {
|
||||
compatible = "mmc-pwrseq-emmc";
|
||||
reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
fan0: pwm-fan {
|
||||
compatible = "pwm-fan";
|
||||
#cooling-cells = <2>;
|
||||
cooling-min-state = <0>;
|
||||
cooling-max-state = <3>;
|
||||
cooling-levels = <0 120 170 220>;
|
||||
pwms = <&pwm_cd 1 40000 0>;
|
||||
};
|
||||
|
||||
hdmi-connector {
|
||||
compatible = "hdmi-connector";
|
||||
type = "a";
|
||||
|
||||
port {
|
||||
hdmi_connector_in: endpoint {
|
||||
remote-endpoint = <&hdmi_tx_tmds_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led-0 {
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
|
||||
led-1 {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
|
||||
clocks = <&wifi32k>;
|
||||
clock-names = "ext_clock";
|
||||
};
|
||||
|
||||
wifi32k: wifi32k {
|
||||
compatible = "pwm-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <32768>;
|
||||
pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
|
||||
};
|
||||
|
||||
dc_in: regulator-dc-in {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "DC_IN";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vcc_5v: regulator-vcc-5v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VCC_5V";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&dc_in>;
|
||||
|
||||
gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
vcc_3v3: regulator-vcc-3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VCC_3V3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vsys_3v3>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vcc_1v8: regulator-vcc-1v8 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VCC_1V8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&vcc_3v3>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vddao_1v8: regulator-vddao-1v8 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VDDIO_AO1V8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&vsys_3v3>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vddcpu_a: regulator-vddcpu-a {
|
||||
compatible = "pwm-regulator";
|
||||
regulator-name = "VDDCPU_A";
|
||||
regulator-min-microvolt = <690000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
pwm-supply = <&dc_in>;
|
||||
pwms = <&pwm_ab 0 1250 0>;
|
||||
pwm-dutycycle-range = <100 0>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vddcpu_b: regulator-vddcpu-b {
|
||||
compatible = "pwm-regulator";
|
||||
regulator-name = "VDDCPU_B";
|
||||
regulator-min-microvolt = <690000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
pwm-supply = <&vsys_3v3>;
|
||||
pwms = <&pwm_AO_cd 1 1250 0>;
|
||||
pwm-dutycycle-range = <100 0>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vsys_3v3: regulator-vsys-3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VSYS_3V3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&dc_in>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
emmc_1v8: regulator-emmc-1v8 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "EMMC_AO1V8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&vcc_3v3>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
usb_pwr: regulator-usb-pwr {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "USB_PWR";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc_5v>;
|
||||
|
||||
gpio = <&gpio GPIOA_6 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
sound {
|
||||
compatible = "amlogic,axg-sound-card";
|
||||
model = "BPI-M2S";
|
||||
audio-aux-devs = <&tdmout_b>;
|
||||
audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
|
||||
"TDMOUT_B IN 1", "FRDDR_B OUT 1",
|
||||
"TDMOUT_B IN 2", "FRDDR_C OUT 1",
|
||||
"TDM_B Playback", "TDMOUT_B OUT";
|
||||
|
||||
assigned-clocks = <&clkc CLKID_MPLL2>,
|
||||
<&clkc CLKID_MPLL0>,
|
||||
<&clkc CLKID_MPLL1>;
|
||||
assigned-clock-parents = <0>, <0>, <0>;
|
||||
assigned-clock-rates = <294912000>,
|
||||
<270950400>,
|
||||
<393216000>;
|
||||
|
||||
dai-link-0 {
|
||||
sound-dai = <&frddr_a>;
|
||||
};
|
||||
|
||||
dai-link-1 {
|
||||
sound-dai = <&frddr_b>;
|
||||
};
|
||||
|
||||
dai-link-2 {
|
||||
sound-dai = <&frddr_c>;
|
||||
};
|
||||
|
||||
/* 8ch hdmi interface */
|
||||
dai-link-3 {
|
||||
sound-dai = <&tdmif_b>;
|
||||
dai-format = "i2s";
|
||||
dai-tdm-slot-tx-mask-0 = <1 1>;
|
||||
dai-tdm-slot-tx-mask-1 = <1 1>;
|
||||
dai-tdm-slot-tx-mask-2 = <1 1>;
|
||||
dai-tdm-slot-tx-mask-3 = <1 1>;
|
||||
mclk-fs = <256>;
|
||||
|
||||
codec {
|
||||
sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
|
||||
};
|
||||
};
|
||||
|
||||
/* hdmi glue */
|
||||
dai-link-4 {
|
||||
sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
|
||||
|
||||
codec {
|
||||
sound-dai = <&hdmi_tx>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&arb {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&clkc_audio {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cecb_AO {
|
||||
pinctrl-0 = <&cec_ao_b_h_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
hdmi-phandle = <&hdmi_tx>;
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <&vddcpu_b>;
|
||||
operating-points-v2 = <&cpu_opp_table_0>;
|
||||
clocks = <&clkc CLKID_CPU_CLK>;
|
||||
clock-latency = <50000>;
|
||||
};
|
||||
|
||||
&cpu1 {
|
||||
cpu-supply = <&vddcpu_b>;
|
||||
operating-points-v2 = <&cpu_opp_table_0>;
|
||||
clocks = <&clkc CLKID_CPU_CLK>;
|
||||
clock-latency = <50000>;
|
||||
};
|
||||
|
||||
&cpu100 {
|
||||
cpu-supply = <&vddcpu_a>;
|
||||
operating-points-v2 = <&cpub_opp_table_1>;
|
||||
clocks = <&clkc CLKID_CPUB_CLK>;
|
||||
clock-latency = <50000>;
|
||||
};
|
||||
|
||||
&cpu101 {
|
||||
cpu-supply = <&vddcpu_a>;
|
||||
operating-points-v2 = <&cpub_opp_table_1>;
|
||||
clocks = <&clkc CLKID_CPUB_CLK>;
|
||||
clock-latency = <50000>;
|
||||
};
|
||||
|
||||
&cpu102 {
|
||||
cpu-supply = <&vddcpu_a>;
|
||||
operating-points-v2 = <&cpub_opp_table_1>;
|
||||
clocks = <&clkc CLKID_CPUB_CLK>;
|
||||
clock-latency = <50000>;
|
||||
};
|
||||
|
||||
&cpu103 {
|
||||
cpu-supply = <&vddcpu_a>;
|
||||
operating-points-v2 = <&cpub_opp_table_1>;
|
||||
clocks = <&clkc CLKID_CPUB_CLK>;
|
||||
clock-latency = <50000>;
|
||||
};
|
||||
|
||||
ðmac {
|
||||
pinctrl-0 = <ð_pins>, <ð_rgmii_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
phy-mode = "rgmii";
|
||||
phy-handle = <&external_phy>;
|
||||
amlogic,tx-delay-ns = <2>;
|
||||
};
|
||||
|
||||
&ext_mdio {
|
||||
external_phy: ethernet-phy@0 {
|
||||
/* Realtek RTL8211F (0x001cc916) */
|
||||
reg = <0>;
|
||||
max-speed = <1000>;
|
||||
|
||||
reset-assert-us = <10000>;
|
||||
reset-deassert-us = <80000>;
|
||||
reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
|
||||
|
||||
interrupt-parent = <&gpio_intc>;
|
||||
/* MAC_INTR on GPIOZ_14 */
|
||||
interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
&frddr_a {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&frddr_b {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&frddr_c {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi_tx {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
|
||||
pinctrl-names = "default";
|
||||
hdmi-supply = <&vcc_5v>;
|
||||
};
|
||||
|
||||
&hdmi_tx_tmds_port {
|
||||
hdmi_tx_tmds_out: endpoint {
|
||||
remote-endpoint = <&hdmi_connector_in>;
|
||||
};
|
||||
};
|
||||
|
||||
/* Main i2c bus */
|
||||
&i2c2 {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&i2c2_sda_x_pins>, <&i2c2_sck_x_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
reset-gpios = <&gpio GPIOA_8 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
&pwm_ab {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&pwm_a_e_pins>;
|
||||
pinctrl-names = "default";
|
||||
clocks = <&xtal>;
|
||||
clock-names = "clkin0";
|
||||
};
|
||||
|
||||
&pwm_cd {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&pwm_d_x6_pins>;
|
||||
pinctrl-names = "default";
|
||||
pwm-gpios = <&gpio GPIOAO_10 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
&pwm_ef {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&pwm_e_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&pwm_AO_cd {
|
||||
pinctrl-0 = <&pwm_ao_d_e_pins>;
|
||||
pinctrl-names = "default";
|
||||
clocks = <&xtal>;
|
||||
clock-names = "clkin1";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
status = "okay";
|
||||
vref-supply = <&vddao_1v8>;
|
||||
};
|
||||
|
||||
/* SDIO */
|
||||
&sd_emmc_a {
|
||||
/* enable if WiFi/BT board connected */
|
||||
status = "disabled";
|
||||
pinctrl-0 = <&sdio_pins>;
|
||||
pinctrl-1 = <&sdio_clk_gate_pins>;
|
||||
pinctrl-names = "default", "clk-gate";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
bus-width = <4>;
|
||||
sd-uhs-sdr104;
|
||||
max-frequency = <50000000>;
|
||||
|
||||
non-removable;
|
||||
disable-wp;
|
||||
|
||||
/* WiFi firmware requires power in suspend */
|
||||
keep-power-in-suspend;
|
||||
|
||||
mmc-pwrseq = <&sdio_pwrseq>;
|
||||
|
||||
vmmc-supply = <&vsys_3v3>;
|
||||
vqmmc-supply = <&vddao_1v8>;
|
||||
|
||||
rtl8822cs: wifi@1 {
|
||||
reg = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
/* SD card */
|
||||
&sd_emmc_b {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&sdcard_c_pins>;
|
||||
pinctrl-1 = <&sdcard_clk_gate_c_pins>;
|
||||
pinctrl-names = "default", "clk-gate";
|
||||
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
max-frequency = <50000000>;
|
||||
disable-wp;
|
||||
|
||||
cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
|
||||
vmmc-supply = <&vsys_3v3>;
|
||||
vqmmc-supply = <&vsys_3v3>;
|
||||
};
|
||||
|
||||
/* eMMC */
|
||||
&sd_emmc_c {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
|
||||
pinctrl-1 = <&emmc_clk_gate_pins>;
|
||||
pinctrl-names = "default", "clk-gate";
|
||||
|
||||
bus-width = <8>;
|
||||
cap-mmc-highspeed;
|
||||
mmc-ddr-1_8v;
|
||||
mmc-hs200-1_8v;
|
||||
max-frequency = <200000000>;
|
||||
disable-wp;
|
||||
|
||||
mmc-pwrseq = <&emmc_pwrseq>;
|
||||
vmmc-supply = <&vcc_3v3>;
|
||||
vqmmc-supply = <&emmc_1v8>;
|
||||
};
|
||||
|
||||
&tdmif_b {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tdmout_b {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tohdmitx {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart_A {
|
||||
/* enable if WiFi/BT board connected */
|
||||
status = "disabled";
|
||||
pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
|
||||
pinctrl-names = "default";
|
||||
uart-has-rtscts;
|
||||
|
||||
bluetooth {
|
||||
compatible = "realtek,rtl8822cs-bt";
|
||||
enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
|
||||
host-wake-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>;
|
||||
device-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
&uart_AO {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&uart_ao_a_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&usb2_phy0 {
|
||||
phy-supply = <&dc_in>;
|
||||
};
|
||||
|
||||
&usb2_phy1 {
|
||||
phy-supply = <&usb_pwr>;
|
||||
};
|
||||
|
||||
&usb3_pcie_phy {
|
||||
phy-supply = <&usb_pwr>;
|
||||
};
|
||||
|
||||
&usb {
|
||||
status = "okay";
|
||||
dr_mode = "peripheral";
|
||||
phys = <&usb2_phy0>, <&usb2_phy1>;
|
||||
phy-names = "usb2-phy0", "usb2-phy1";
|
||||
};
|
||||
@@ -620,7 +620,7 @@ &frddr_a {
|
||||
};
|
||||
|
||||
&periphs_pinctrl {
|
||||
keypad_gpio_pins: keypad-gpio {
|
||||
keypad_gpio_pins: keypad-gpio-state {
|
||||
mux {
|
||||
groups = "GPIOX_0", "GPIOX_1", "GPIOX_2", "GPIOX_3",
|
||||
"GPIOX_4", "GPIOX_5", "GPIOX_6", "GPIOX_7",
|
||||
|
||||
@@ -360,7 +360,7 @@ &pwm_ef {
|
||||
pinctrl-0 = <&pwm_e_pins>;
|
||||
pinctrl-names = "default";
|
||||
clocks = <&xtal>;
|
||||
clock-names = "clkin2";
|
||||
clock-names = "clkin0";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
@@ -368,7 +368,7 @@ &pwm_AO_ab {
|
||||
pinctrl-0 = <&pwm_ao_a_pins>;
|
||||
pinctrl-names = "default";
|
||||
clocks = <&xtal>;
|
||||
clock-names = "clkin3";
|
||||
clock-names = "clkin0";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
@@ -376,7 +376,7 @@ &pwm_AO_cd {
|
||||
pinctrl-0 = <&pwm_ao_d_e_pins>;
|
||||
pinctrl-names = "default";
|
||||
clocks = <&xtal>;
|
||||
clock-names = "clkin4";
|
||||
clock-names = "clkin1";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
|
||||
@@ -0,0 +1,14 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2023 Christian Hewitt <christianshewitt@gmail.com>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "meson-g12b-s922x.dtsi"
|
||||
#include "meson-g12b-bananapi.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "bananapi,bpi-m2s", "amlogic,s922x", "amlogic,g12b";
|
||||
model = "BananaPi M2S";
|
||||
};
|
||||
@@ -6,21 +6,29 @@
|
||||
/dts-v1/;
|
||||
|
||||
#include "meson-gxbb-p20x.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/sound/meson-aiu.h>
|
||||
|
||||
/ {
|
||||
compatible = "videostrong,kii-pro", "amlogic,meson-gxbb";
|
||||
model = "Videostrong KII Pro";
|
||||
|
||||
spdif_dit: audio-codec-0 {
|
||||
#sound-dai-cells = <0>;
|
||||
compatible = "linux,spdif-dit";
|
||||
status = "okay";
|
||||
sound-name-prefix = "DIT";
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
led {
|
||||
gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
default-state = "off";
|
||||
};
|
||||
};
|
||||
|
||||
@@ -35,22 +43,58 @@ button-reset {
|
||||
};
|
||||
};
|
||||
|
||||
};
|
||||
sound {
|
||||
compatible = "amlogic,gx-sound-card";
|
||||
model = "KII-PRO";
|
||||
assigned-clocks = <&clkc CLKID_MPLL0>,
|
||||
<&clkc CLKID_MPLL1>,
|
||||
<&clkc CLKID_MPLL2>;
|
||||
assigned-clock-parents = <0>, <0>, <0>;
|
||||
assigned-clock-rates = <294912000>,
|
||||
<270950400>,
|
||||
<393216000>;
|
||||
|
||||
dai-link-0 {
|
||||
sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
|
||||
};
|
||||
|
||||
dai-link-1 {
|
||||
sound-dai = <&aiu AIU_CPU CPU_SPDIF_FIFO>;
|
||||
};
|
||||
|
||||
&uart_A {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
|
||||
pinctrl-names = "default";
|
||||
uart-has-rtscts;
|
||||
dai-link-2 {
|
||||
sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
|
||||
dai-format = "i2s";
|
||||
mclk-fs = <256>;
|
||||
|
||||
bluetooth {
|
||||
compatible = "brcm,bcm4335a0";
|
||||
codec-0 {
|
||||
sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
|
||||
};
|
||||
};
|
||||
|
||||
dai-link-3 {
|
||||
sound-dai = <&aiu AIU_CPU CPU_SPDIF_ENCODER>;
|
||||
|
||||
codec-0 {
|
||||
sound-dai = <&spdif_dit>;
|
||||
};
|
||||
};
|
||||
|
||||
dai-link-4 {
|
||||
sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
|
||||
|
||||
codec-0 {
|
||||
sound-dai = <&hdmi_tx>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
&aiu {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&spdif_out_y_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
ðmac {
|
||||
status = "okay";
|
||||
@@ -78,3 +122,19 @@ eth_phy0: ethernet-phy@0 {
|
||||
&ir {
|
||||
linux,rc-map-name = "rc-videostrong-kii-pro";
|
||||
};
|
||||
|
||||
&uart_A {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
|
||||
pinctrl-names = "default";
|
||||
uart-has-rtscts;
|
||||
|
||||
bluetooth {
|
||||
compatible = "brcm,bcm4335a0";
|
||||
shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>;
|
||||
host-wakeup-gpios = <&gpio GPIOX_21 GPIO_ACTIVE_HIGH>;
|
||||
max-speed = <2000000>;
|
||||
clocks = <&wifi32k>;
|
||||
clock-names = "lpo";
|
||||
};
|
||||
};
|
||||
|
||||
@@ -300,8 +300,8 @@ ðmac {
|
||||
};
|
||||
|
||||
&gpio_intc {
|
||||
compatible = "amlogic,meson-gpio-intc",
|
||||
"amlogic,meson-gxbb-gpio-intc";
|
||||
compatible = "amlogic,meson-gxbb-gpio-intc",
|
||||
"amlogic,meson-gpio-intc";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
|
||||
@@ -305,7 +305,6 @@ &usb {
|
||||
};
|
||||
|
||||
&usb2_phy0 {
|
||||
pinctrl-names = "default";
|
||||
phy-supply = <&vcc5v>;
|
||||
};
|
||||
|
||||
|
||||
@@ -312,8 +312,8 @@ &clkc_AO {
|
||||
};
|
||||
|
||||
&gpio_intc {
|
||||
compatible = "amlogic,meson-gpio-intc",
|
||||
"amlogic,meson-gxl-gpio-intc";
|
||||
compatible = "amlogic,meson-gxl-gpio-intc",
|
||||
"amlogic,meson-gpio-intc";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
@@ -773,16 +773,23 @@ mux {
|
||||
};
|
||||
};
|
||||
|
||||
eth-phy-mux@55c {
|
||||
compatible = "mdio-mux-mmioreg", "mdio-mux";
|
||||
eth_phy_mux: mdio@558 {
|
||||
reg = <0x0 0x558 0x0 0xc>;
|
||||
compatible = "amlogic,gxl-mdio-mux";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x0 0x55c 0x0 0x4>;
|
||||
mux-mask = <0xffffffff>;
|
||||
clocks = <&clkc CLKID_FCLK_DIV4>;
|
||||
clock-names = "ref";
|
||||
mdio-parent-bus = <&mdio0>;
|
||||
|
||||
internal_mdio: mdio@e40908ff {
|
||||
reg = <0xe40908ff>;
|
||||
external_mdio: mdio@0 {
|
||||
reg = <0x0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
|
||||
internal_mdio: mdio@1 {
|
||||
reg = <0x1>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
@@ -793,12 +800,6 @@ internal_phy: ethernet-phy@8 {
|
||||
max-speed = <100>;
|
||||
};
|
||||
};
|
||||
|
||||
external_mdio: mdio@2009087f {
|
||||
reg = <0x2009087f>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
@@ -54,6 +54,10 @@ fusb302@22 {
|
||||
vbus-supply = <&typec2_vbus>;
|
||||
|
||||
status = "okay";
|
||||
|
||||
connector {
|
||||
compatible = "usb-c-connector";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
@@ -85,7 +85,7 @@ gic: interrupt-controller@fff01000 {
|
||||
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
|
||||
};
|
||||
|
||||
apb4: apb4@fe000000 {
|
||||
apb4: bus@fe000000 {
|
||||
compatible = "simple-bus";
|
||||
reg = <0x0 0xfe000000 0x0 0x480000>;
|
||||
#address-cells = <2>;
|
||||
|
||||
@@ -105,7 +105,7 @@ vddio_c: regulator-vddio_c {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
enable-gpio = <&gpio_ao GPIOE_2 GPIO_OPEN_DRAIN>;
|
||||
enable-gpios = <&gpio_ao GPIOE_2 GPIO_OPEN_DRAIN>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
|
||||
@@ -316,7 +316,7 @@ &gpio {
|
||||
* be handled by a USB specific power sequence to reset the Hub
|
||||
* when the USB bus is powered down.
|
||||
*/
|
||||
usb-hub {
|
||||
usb-hub-hog {
|
||||
gpio-hog;
|
||||
gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>;
|
||||
output-high;
|
||||
|
||||
@@ -48,7 +48,7 @@ tf_io: gpio-regulator-tf_io {
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc_5v>;
|
||||
|
||||
enable-gpio = <&gpio_ao GPIOE_2 GPIO_OPEN_DRAIN>;
|
||||
enable-gpios = <&gpio_ao GPIOE_2 GPIO_OPEN_DRAIN>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
|
||||
|
||||
Reference in New Issue
Block a user