mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2026-05-04 20:53:07 -04:00
Merge tag 'v5.19-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
New peripherals supported on rk356x: sfc, usb3, sata and the video-decoder on rk3328. RK3399 received some improvements and nodes for the memory controller. Additional peripherals for PineNote, Gru and BananaPi-R2-Pro. New boards are the Firefly Station M2, Pine64 SoQuartz SOM and Quartz64 model B as well as the Radxa Rock3 model A. * tag 'v5.19-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (32 commits) arm64: dts: rockchip: enable otg/drd operation of usb_host0_xhci in rk356x arm64: dts: rockchip: rename HDMI ref clock to 'ref' on rk3399 arm64: dts: rockchip: add dts for Firefly Station M2 rk3566 arm64: dts: rockchip: add SoQuartz CM4IO dts arm64: dts: rockchip: add Pine64 Quartz64-B device tree dt-bindings: arm: rockchip: Add Firefly Station M2 dt-bindings: arm: rockchip: Add Pine64 SoQuartz SoM dt-bindings: arm: rockchip: Add Pine64 Quartz64 Model B arm64: dts: rockchip: enable usb hub on the radxa rock3 model a arm64: dts: rockchip: add usb3 support to the radxa rock3 model a arm64: dts: rockchip: add rk356x sfc support arm64: dts: rockchip: Add USB and TCPC to rk3566-pinenote arm64: dts: rockchip: Add accelerometer to rk3566-pinenote arm64: dts: rockchip: add an input enable pinconf to rk3399 arm64: dts: rockchip: Add vdec support for RK3328 arm64: dts: rockchip: Rename vdec_mmu node for RK3328 arm64: dts: rockchip: Enable dmc and dfi nodes on gru arm64: dts: rockchip: Add dfi and dmc nodes to rk3399 arm64: dts: rockchip: add clocks property to cru nodes rk3399 arm64: dts: rockchip: use generic node name for pmucru on rk3399 ... Link: https://lore.kernel.org/r/7748558.DvuYhMxLoT@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This commit is contained in:
Arnd Bergmann
@@ -133,6 +133,11 @@ properties:
|
||||
- firefly,roc-rk3399-pc-plus
|
||||
- const: rockchip,rk3399
|
||||
|
||||
- description: Firefly Station M2
|
||||
items:
|
||||
- const: firefly,rk3566-roc-pc
|
||||
- const: rockchip,rk3566
|
||||
|
||||
- description: FriendlyElec NanoPi R2S
|
||||
items:
|
||||
- const: friendlyarm,nanopi-r2s
|
||||
@@ -502,9 +507,18 @@ properties:
|
||||
- const: pine64,rockpro64
|
||||
- const: rockchip,rk3399
|
||||
|
||||
- description: Pine64 Quartz64 Model A
|
||||
- description: Pine64 Quartz64 Model A/B
|
||||
items:
|
||||
- const: pine64,quartz64-a
|
||||
- enum:
|
||||
- pine64,quartz64-a
|
||||
- pine64,quartz64-b
|
||||
- const: rockchip,rk3566
|
||||
|
||||
- description: Pine64 SoQuartz SoM
|
||||
items:
|
||||
- enum:
|
||||
- pine64,soquartz-cm4io
|
||||
- const: pine64,soquartz
|
||||
- const: rockchip,rk3566
|
||||
|
||||
- description: Radxa Rock
|
||||
@@ -545,6 +559,11 @@ properties:
|
||||
- const: radxa,rock2-square
|
||||
- const: rockchip,rk3288
|
||||
|
||||
- description: Radxa ROCK3 Model A
|
||||
items:
|
||||
- const: radxa,rock3a
|
||||
- const: rockchip,rk3568
|
||||
|
||||
- description: Rikomagic MK808 v1
|
||||
items:
|
||||
- const: rikomagic,mk808
|
||||
|
||||
@@ -59,5 +59,9 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-rock-pi-n10.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.1.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.2.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-a.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-b.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-roc-pc.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-cm4.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb
|
||||
|
||||
@@ -306,6 +306,10 @@ power-domain@RK3328_PD_HEVC {
|
||||
};
|
||||
power-domain@RK3328_PD_VIDEO {
|
||||
reg = <RK3328_PD_VIDEO>;
|
||||
clocks = <&cru ACLK_RKVDEC>,
|
||||
<&cru HCLK_RKVDEC>,
|
||||
<&cru SCLK_VDEC_CABAC>,
|
||||
<&cru SCLK_VDEC_CORE>;
|
||||
#power-domain-cells = <0>;
|
||||
};
|
||||
power-domain@RK3328_PD_VPU {
|
||||
@@ -660,14 +664,28 @@ vpu_mmu: iommu@ff350800 {
|
||||
power-domains = <&power RK3328_PD_VPU>;
|
||||
};
|
||||
|
||||
rkvdec_mmu: iommu@ff360480 {
|
||||
vdec: video-codec@ff360000 {
|
||||
compatible = "rockchip,rk3328-vdec", "rockchip,rk3399-vdec";
|
||||
reg = <0x0 0xff360000 0x0 0x400>;
|
||||
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cru ACLK_RKVDEC>, <&cru HCLK_RKVDEC>,
|
||||
<&cru SCLK_VDEC_CABAC>, <&cru SCLK_VDEC_CORE>;
|
||||
clock-names = "axi", "ahb", "cabac", "core";
|
||||
assigned-clocks = <&cru ACLK_RKVDEC>, <&cru SCLK_VDEC_CABAC>,
|
||||
<&cru SCLK_VDEC_CORE>;
|
||||
assigned-clock-rates = <400000000>, <400000000>, <300000000>;
|
||||
iommus = <&vdec_mmu>;
|
||||
power-domains = <&power RK3328_PD_VIDEO>;
|
||||
};
|
||||
|
||||
vdec_mmu: iommu@ff360480 {
|
||||
compatible = "rockchip,iommu";
|
||||
reg = <0x0 0xff360480 0x0 0x40>, <0x0 0xff3604c0 0x0 0x40>;
|
||||
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cru ACLK_RKVDEC>, <&cru HCLK_RKVDEC>;
|
||||
clock-names = "aclk", "iface";
|
||||
#iommu-cells = <0>;
|
||||
status = "disabled";
|
||||
power-domains = <&power RK3328_PD_VIDEO>;
|
||||
};
|
||||
|
||||
vop: vop@ff370000 {
|
||||
|
||||
@@ -5,6 +5,7 @@
|
||||
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/input/linux-event-codes.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include <dt-bindings/pwm/pwm.h>
|
||||
#include <dt-bindings/usb/pd.h>
|
||||
#include "rk3399.dtsi"
|
||||
@@ -786,7 +787,7 @@ brcmf: wifi@1 {
|
||||
reg = <1>;
|
||||
compatible = "brcm,bcm4329-fmac";
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
|
||||
interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "host-wake";
|
||||
brcm,drive-strength = <5>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
@@ -234,6 +234,13 @@ &cdn_dp {
|
||||
extcon = <&usbc_extcon0>, <&usbc_extcon1>;
|
||||
};
|
||||
|
||||
&dmc {
|
||||
center-supply = <&ppvar_centerlogic>;
|
||||
rockchip,pd-idle-dis-freq-hz = <800000000>;
|
||||
rockchip,sr-idle-dis-freq-hz = <800000000>;
|
||||
rockchip,sr-mc-gate-idle-dis-freq-hz = <800000000>;
|
||||
};
|
||||
|
||||
&edp {
|
||||
status = "okay";
|
||||
|
||||
|
||||
@@ -391,6 +391,18 @@ &cru {
|
||||
<400000000>;
|
||||
};
|
||||
|
||||
/* The center supply is fixed to .9V on scarlet */
|
||||
&dmc {
|
||||
center-supply = <&pp900_s0>;
|
||||
};
|
||||
|
||||
/* We don't need .925 V for 928 MHz on scarlet */
|
||||
&dmc_opp_table {
|
||||
opp03 {
|
||||
opp-microvolt = <900000>;
|
||||
};
|
||||
};
|
||||
|
||||
&gpio0 {
|
||||
gpio-line-names = /* GPIO0 A 0-7 */
|
||||
"CLK_32K_AP",
|
||||
|
||||
@@ -373,6 +373,34 @@ &cru {
|
||||
<200000000>;
|
||||
};
|
||||
|
||||
&dfi {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dmc {
|
||||
status = "okay";
|
||||
|
||||
rockchip,pd-idle-ns = <160>;
|
||||
rockchip,sr-idle-ns = <10240>;
|
||||
rockchip,sr-mc-gate-idle-ns = <40960>;
|
||||
rockchip,srpd-lite-idle-ns = <61440>;
|
||||
rockchip,standby-idle-ns = <81920>;
|
||||
|
||||
rockchip,ddr3_odt_dis_freq = <666000000>;
|
||||
rockchip,lpddr3_odt_dis_freq = <666000000>;
|
||||
rockchip,lpddr4_odt_dis_freq = <666000000>;
|
||||
|
||||
rockchip,sr-mc-gate-idle-dis-freq-hz = <1000000000>;
|
||||
rockchip,srpd-lite-idle-dis-freq-hz = <0>;
|
||||
rockchip,standby-idle-dis-freq-hz = <928000000>;
|
||||
};
|
||||
|
||||
&dmc_opp_table {
|
||||
opp03 {
|
||||
opp-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
&emmc_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
@@ -2,6 +2,7 @@
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/pwm/pwm.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include "rk3399.dtsi"
|
||||
#include "rk3399-opp.dtsi"
|
||||
|
||||
@@ -629,7 +630,7 @@ brcmf: wifi@1 {
|
||||
compatible = "brcm,bcm4329-fmac";
|
||||
reg = <1>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
|
||||
interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "host-wake";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_host_wake_l>;
|
||||
|
||||
@@ -6,6 +6,7 @@
|
||||
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/input/linux-event-codes.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include <dt-bindings/pwm/pwm.h>
|
||||
#include "rk3399.dtsi"
|
||||
#include "rk3399-opp.dtsi"
|
||||
@@ -682,7 +683,7 @@ brcmf: wifi@1 {
|
||||
reg = <1>;
|
||||
compatible = "brcm,bcm4329-fmac";
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
|
||||
interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "host-wake";
|
||||
brcm,drive-strength = <5>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
@@ -5,6 +5,7 @@
|
||||
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/input/linux-event-codes.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include <dt-bindings/pwm/pwm.h>
|
||||
#include "rk3399.dtsi"
|
||||
#include "rk3399-opp.dtsi"
|
||||
@@ -509,7 +510,7 @@ brcmf: wifi@1 {
|
||||
compatible = "brcm,bcm4329-fmac";
|
||||
reg = <1>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
|
||||
interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "host-wake";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_host_wake_l>;
|
||||
|
||||
@@ -267,7 +267,7 @@ rk808: pmic@1b {
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_int_l>;
|
||||
pinctrl-0 = <&pmic_int_l>, <&ap_pwroff>, <&clk_32k>;
|
||||
rockchip,system-power-controller;
|
||||
wakeup-source;
|
||||
|
||||
|
||||
@@ -110,6 +110,27 @@ opp05 {
|
||||
opp-microvolt = <1075000>;
|
||||
};
|
||||
};
|
||||
|
||||
dmc_opp_table: dmc_opp_table {
|
||||
compatible = "operating-points-v2";
|
||||
|
||||
opp00 {
|
||||
opp-hz = /bits/ 64 <400000000>;
|
||||
opp-microvolt = <900000>;
|
||||
};
|
||||
opp01 {
|
||||
opp-hz = /bits/ 64 <666000000>;
|
||||
opp-microvolt = <900000>;
|
||||
};
|
||||
opp02 {
|
||||
opp-hz = /bits/ 64 <800000000>;
|
||||
opp-microvolt = <900000>;
|
||||
};
|
||||
opp03 {
|
||||
opp-hz = /bits/ 64 <928000000>;
|
||||
opp-microvolt = <925000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&cpu_l0 {
|
||||
@@ -136,6 +157,10 @@ &cpu_b1 {
|
||||
operating-points-v2 = <&cluster1_opp>;
|
||||
};
|
||||
|
||||
&dmc {
|
||||
operating-points-v2 = <&dmc_opp_table>;
|
||||
};
|
||||
|
||||
&gpu {
|
||||
operating-points-v2 = <&gpu_opp_table>;
|
||||
};
|
||||
|
||||
@@ -7,6 +7,7 @@
|
||||
|
||||
#include "dt-bindings/pwm/pwm.h"
|
||||
#include "dt-bindings/input/input.h"
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include "dt-bindings/usb/pd.h"
|
||||
#include "rk3399.dtsi"
|
||||
#include "rk3399-opp.dtsi"
|
||||
@@ -735,7 +736,7 @@ brcmf: wifi@1 {
|
||||
reg = <1>;
|
||||
compatible = "brcm,bcm4329-fmac";
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
|
||||
interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "host-wake";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_host_wake_l>;
|
||||
|
||||
@@ -23,7 +23,7 @@ brcmf: wifi@1 {
|
||||
compatible = "brcm,bcm4329-fmac";
|
||||
reg = <1>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
|
||||
interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "host-wake";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_host_wake_l>;
|
||||
|
||||
@@ -31,7 +31,7 @@ brcmf: wifi@1 {
|
||||
compatible = "brcm,bcm4329-fmac";
|
||||
reg = <1>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
|
||||
interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "host-wake";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_host_wake_l>;
|
||||
|
||||
@@ -7,6 +7,7 @@
|
||||
|
||||
#include "rk3399.dtsi"
|
||||
#include "rk3399-opp.dtsi"
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
@@ -528,7 +529,7 @@ brcmf: wifi@1 {
|
||||
compatible = "brcm,bcm4329-fmac";
|
||||
reg = <1>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
|
||||
interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "host-wake";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_host_wake_l>;
|
||||
|
||||
@@ -178,6 +178,15 @@ display-subsystem {
|
||||
ports = <&vopl_out>, <&vopb_out>;
|
||||
};
|
||||
|
||||
dmc: memory-controller {
|
||||
compatible = "rockchip,rk3399-dmc";
|
||||
rockchip,pmu = <&pmugrf>;
|
||||
devfreq-events = <&dfi>;
|
||||
clocks = <&cru SCLK_DDRC>;
|
||||
clock-names = "dmc_clk";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pmu_a53 {
|
||||
compatible = "arm,cortex-a53-pmu";
|
||||
interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster0>;
|
||||
@@ -1295,6 +1304,16 @@ pwm3: pwm@ff420030 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
dfi: dfi@ff630000 {
|
||||
reg = <0x00 0xff630000 0x00 0x4000>;
|
||||
compatible = "rockchip,rk3399-dfi";
|
||||
rockchip,pmu = <&pmugrf>;
|
||||
interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH 0>;
|
||||
clocks = <&cru PCLK_DDR_MON>;
|
||||
clock-names = "pclk_ddr_mon";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
vpu: video-codec@ff650000 {
|
||||
compatible = "rockchip,rk3399-vpu";
|
||||
reg = <0x0 0xff650000 0x0 0x800>;
|
||||
@@ -1413,9 +1432,11 @@ dmac_peri: dma-controller@ff6e0000 {
|
||||
clock-names = "apb_pclk";
|
||||
};
|
||||
|
||||
pmucru: pmu-clock-controller@ff750000 {
|
||||
pmucru: clock-controller@ff750000 {
|
||||
compatible = "rockchip,rk3399-pmucru";
|
||||
reg = <0x0 0xff750000 0x0 0x1000>;
|
||||
clocks = <&xin24m>;
|
||||
clock-names = "xin24m";
|
||||
rockchip,grf = <&pmugrf>;
|
||||
#clock-cells = <1>;
|
||||
#reset-cells = <1>;
|
||||
@@ -1426,6 +1447,8 @@ pmucru: pmu-clock-controller@ff750000 {
|
||||
cru: clock-controller@ff760000 {
|
||||
compatible = "rockchip,rk3399-cru";
|
||||
reg = <0x0 0xff760000 0x0 0x1000>;
|
||||
clocks = <&xin24m>;
|
||||
clock-names = "xin24m";
|
||||
rockchip,grf = <&grf>;
|
||||
#clock-cells = <1>;
|
||||
#reset-cells = <1>;
|
||||
@@ -1534,6 +1557,7 @@ emmc_phy: phy@f780 {
|
||||
reg = <0xf780 0x24>;
|
||||
clocks = <&sdhci>;
|
||||
clock-names = "emmcclk";
|
||||
drive-impedance-ohm = <50>;
|
||||
#phy-cells = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
@@ -1544,7 +1568,6 @@ pcie_phy: pcie-phy {
|
||||
clock-names = "refclk";
|
||||
#phy-cells = <1>;
|
||||
resets = <&cru SRST_PCIEPHY>;
|
||||
drive-impedance-ohm = <50>;
|
||||
reset-names = "phy";
|
||||
status = "disabled";
|
||||
};
|
||||
@@ -1884,7 +1907,7 @@ hdmi: hdmi@ff940000 {
|
||||
<&cru SCLK_HDMI_CEC>,
|
||||
<&cru PCLK_VIO_GRF>,
|
||||
<&cru PLL_VPLL>;
|
||||
clock-names = "iahb", "isfr", "cec", "grf", "vpll";
|
||||
clock-names = "iahb", "isfr", "cec", "grf", "ref";
|
||||
power-domains = <&power RK3399_PD_HDCP>;
|
||||
reg-io-width = <4>;
|
||||
rockchip,grf = <&grf>;
|
||||
@@ -2188,6 +2211,22 @@ pcfg_output_low: pcfg-output-low {
|
||||
output-low;
|
||||
};
|
||||
|
||||
pcfg_input_enable: pcfg-input-enable {
|
||||
input-enable;
|
||||
};
|
||||
|
||||
pcfg_input_pull_up: pcfg-input-pull-up {
|
||||
input-enable;
|
||||
bias-pull-up;
|
||||
drive-strength = <2>;
|
||||
};
|
||||
|
||||
pcfg_input_pull_down: pcfg-input-pull-down {
|
||||
input-enable;
|
||||
bias-pull-down;
|
||||
drive-strength = <2>;
|
||||
};
|
||||
|
||||
clock {
|
||||
clk_32k: clk-32k {
|
||||
rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>;
|
||||
|
||||
@@ -466,6 +466,55 @@ led@1 {
|
||||
default-brightness = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
wusb3801: tcpc@60 {
|
||||
compatible = "willsemi,wusb3801";
|
||||
reg = <0x60>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-0 = <&tcpc_int_l>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
connector {
|
||||
compatible = "usb-c-connector";
|
||||
label = "USB-C";
|
||||
vbus-supply = <&otg_switch>;
|
||||
power-role = "dual";
|
||||
try-power-role = "sink";
|
||||
data-role = "dual";
|
||||
typec-power-opmode = "default";
|
||||
pd-disable;
|
||||
|
||||
ports {
|
||||
#address-cells = <0x1>;
|
||||
#size-cells = <0x0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0x0>;
|
||||
|
||||
typec_hs_usb2phy0: endpoint {
|
||||
remote-endpoint = <&usb2phy0_typec_hs>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c5 {
|
||||
status = "okay";
|
||||
|
||||
accelerometer@18 {
|
||||
compatible = "silan,sc7a20";
|
||||
reg = <0x18>;
|
||||
interrupt-parent = <&gpio3>;
|
||||
interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-0 = <&accelerometer_int_l>;
|
||||
pinctrl-names = "default";
|
||||
st,drdy-int-pin = <1>;
|
||||
vdd-supply = <&vcc_3v3>;
|
||||
vddio-supply = <&vcc_3v3>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2s1_8ch {
|
||||
@@ -482,6 +531,12 @@ &pdm {
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
accelerometer {
|
||||
accelerometer_int_l: accelerometer-int-l {
|
||||
rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
audio-amplifier {
|
||||
spk_amp_enable_h: spk-amp-enable-h {
|
||||
rockchip,pins = <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
@@ -550,6 +605,12 @@ wifi_enable_h: wifi-enable-h {
|
||||
};
|
||||
};
|
||||
|
||||
tcpc {
|
||||
tcpc_int_l: tcpc-int-l {
|
||||
rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc-wl {
|
||||
vcc_wl_pin: vcc-wl-pin {
|
||||
rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
@@ -637,3 +698,22 @@ bluetooth {
|
||||
&uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_xhci {
|
||||
dr_mode = "otg";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0_otg {
|
||||
status = "okay";
|
||||
|
||||
port {
|
||||
usb2phy0_typec_hs: endpoint {
|
||||
remote-endpoint = <&typec_hs_usb2phy0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
@@ -151,6 +151,16 @@ vcc5v0_usb20_host: vcc5v0_usb20_host {
|
||||
vin-supply = <&vcc5v0_usb>;
|
||||
};
|
||||
|
||||
vcc5v0_usb20_otg: vcc5v0_usb20_otg {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
|
||||
regulator-name = "vcc5v0_usb20_otg";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&dcdc_boost>;
|
||||
};
|
||||
|
||||
vcc3v3_sd: vcc3v3_sd {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-low;
|
||||
@@ -187,6 +197,10 @@ vcc_wl: vcc_wl {
|
||||
};
|
||||
};
|
||||
|
||||
&combphy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
@@ -672,6 +686,29 @@ &usb_host1_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_xhci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* usb3 controller is muxed with sata1 */
|
||||
&usb_host1_xhci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0_host {
|
||||
phy-supply = <&vcc5v0_usb20_host>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0_otg {
|
||||
phy-supply = <&vcc5v0_usb20_otg>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
615
arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts
Normal file
615
arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts
Normal file
@@ -0,0 +1,615 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include "rk3566.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Pine64 RK3566 Quartz64-B Board";
|
||||
compatible = "pine64,quartz64-b", "rockchip,rk3566";
|
||||
|
||||
aliases {
|
||||
ethernet0 = &gmac1;
|
||||
mmc0 = &sdmmc0;
|
||||
mmc1 = &sdhci;
|
||||
mmc2 = &sdmmc1;
|
||||
};
|
||||
|
||||
chosen: chosen {
|
||||
stdout-path = "serial2:1500000n8";
|
||||
};
|
||||
|
||||
gmac1_clkin: external-gmac1-clock {
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <125000000>;
|
||||
clock-output-names = "gmac1_clkin";
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led-user {
|
||||
label = "user-led";
|
||||
default-state = "on";
|
||||
gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&user_led_enable_h>;
|
||||
retain-state-suspended;
|
||||
};
|
||||
};
|
||||
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
status = "okay";
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
clocks = <&rk809 1>;
|
||||
clock-names = "ext_clock";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_enable_h>;
|
||||
reset-gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_LOW>;
|
||||
post-power-on-delay-ms = <100>;
|
||||
power-off-delay-us = <5000000>;
|
||||
};
|
||||
|
||||
vcc5v0_in: vcc5v0-in-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_in";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
|
||||
vcc5v0_sys: vcc5v0-sys-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc5v0_in>;
|
||||
};
|
||||
|
||||
vcc3v3_sys: vcc3v3-sys-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_sys";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc5v0_usb30_host: vcc5v0-usb30-host-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_usb30_host";
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_usb30_host_en_h>;
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_usb_otg";
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_usb_otg_en_h>;
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
};
|
||||
|
||||
&combphy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu1 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu2 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu3 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>;
|
||||
assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>;
|
||||
clock_in_out = "input";
|
||||
phy-mode = "rgmii-id";
|
||||
phy-supply = <&vcc_3v3>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gmac1m1_miim
|
||||
&gmac1m1_tx_bus2
|
||||
&gmac1m1_rx_bus2
|
||||
&gmac1m1_rgmii_clk
|
||||
&gmac1m1_clkinout
|
||||
&gmac1m1_rgmii_bus>;
|
||||
snps,reset-gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
|
||||
snps,reset-active-low;
|
||||
/* Reset time is 20ms, 100ms for rtl8211f, also works well here */
|
||||
snps,reset-delays-us = <0 20000 100000>;
|
||||
tx_delay = <0x4f>;
|
||||
rx_delay = <0x24>;
|
||||
phy-handle = <&rgmii_phy1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
|
||||
vdd_cpu: regulator@1c {
|
||||
compatible = "tcs,tcs4525";
|
||||
reg = <0x1c>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_cpu";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1150000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
rk809: pmic@20 {
|
||||
compatible = "rockchip,rk809";
|
||||
reg = <0x20>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>;
|
||||
clock-output-names = "rk808-clkout1", "rk808-clkout2";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_int>;
|
||||
rockchip,system-power-controller;
|
||||
wakeup-source;
|
||||
#clock-cells = <1>;
|
||||
|
||||
vcc1-supply = <&vcc3v3_sys>;
|
||||
vcc2-supply = <&vcc3v3_sys>;
|
||||
vcc3-supply = <&vcc3v3_sys>;
|
||||
vcc4-supply = <&vcc3v3_sys>;
|
||||
vcc5-supply = <&vcc3v3_sys>;
|
||||
vcc6-supply = <&vcc3v3_sys>;
|
||||
vcc7-supply = <&vcc3v3_sys>;
|
||||
vcc8-supply = <&vcc3v3_sys>;
|
||||
vcc9-supply = <&vcc3v3_sys>;
|
||||
|
||||
regulators {
|
||||
vdd_log: DCDC_REG1 {
|
||||
regulator-name = "vdd_log";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-init-microvolt = <900000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <900000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_gpu: DCDC_REG2 {
|
||||
regulator-name = "vdd_gpu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-init-microvolt = <900000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <900000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_ddr: DCDC_REG3 {
|
||||
regulator-name = "vcc_ddr";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_npu: DCDC_REG4 {
|
||||
regulator-name = "vdd_npu";
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8: DCDC_REG5 {
|
||||
regulator-name = "vcc_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdda0v9_image: LDO_REG1 {
|
||||
regulator-name = "vdda0v9_image";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <900000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdda_0v9: LDO_REG2 {
|
||||
regulator-name = "vdda_0v9";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <900000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdda0v9_pmu: LDO_REG3 {
|
||||
regulator-name = "vdda0v9_pmu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <900000>;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_acodec: LDO_REG4 {
|
||||
regulator-name = "vccio_acodec";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sd: LDO_REG5 {
|
||||
regulator-name = "vccio_sd";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_pmu: LDO_REG6 {
|
||||
regulator-name = "vcc3v3_pmu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca_1v8: LDO_REG7 {
|
||||
regulator-name = "vcca_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca1v8_pmu: LDO_REG8 {
|
||||
regulator-name = "vcca1v8_pmu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca1v8_image: LDO_REG9 {
|
||||
regulator-name = "vcca1v8_image";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3: SWITCH_REG1 {
|
||||
regulator-boot-on;
|
||||
regulator-name = "vcc_3v3";
|
||||
};
|
||||
|
||||
vcc3v3_sd: SWITCH_REG2 {
|
||||
regulator-name = "vcc3v3_sd";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/* i2c2_m1 exposed on csi port, pulled up to vcc_3v3 */
|
||||
&i2c2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c2m1_xfer>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* i2c3_m1 exposed on dsi port, pulled up to vcc_3v3 */
|
||||
&i2c3 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c3m1_xfer>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/*
|
||||
* i2c4_m0 is exposed on PI40, pulled up to vcc_3v3
|
||||
* pin 27 - i2c4_sda_m0
|
||||
* pin 28 - i2c4_scl_m0
|
||||
*/
|
||||
&i2c4 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/*
|
||||
* i2c5_m0 is exposed on PI40
|
||||
* pin 29 - i2c5_scl_m0
|
||||
* pin 31 - i2c5_sda_m0
|
||||
*/
|
||||
&i2c5 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&mdio1 {
|
||||
rgmii_phy1: ethernet-phy@1 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <0x1>;
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
bt {
|
||||
bt_enable_h: bt-enable-h {
|
||||
rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
bt_host_wake_l: bt-host-wake-l {
|
||||
rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
|
||||
bt_wake_l: bt-wake-l {
|
||||
rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
user_led_enable_h: user-led-enable-h {
|
||||
rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pmic {
|
||||
pmic_int: pmic_int {
|
||||
rockchip,pins =
|
||||
<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
sdio-pwrseq {
|
||||
wifi_enable_h: wifi-enable-h {
|
||||
rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
usb {
|
||||
vcc5v0_usb30_host_en_h: vcc5v0-usb30-host-en_h {
|
||||
rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
vcc5v0_usb_otg_en_h: vcc5v0-usb-otg-en_h {
|
||||
rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pmu_io_domains {
|
||||
status = "okay";
|
||||
pmuio1-supply = <&vcc3v3_pmu>;
|
||||
pmuio2-supply = <&vcca1v8_pmu>;
|
||||
vccio1-supply = <&vccio_acodec>;
|
||||
vccio2-supply = <&vcc_1v8>;
|
||||
vccio3-supply = <&vccio_sd>;
|
||||
vccio4-supply = <&vcca1v8_pmu>;
|
||||
vccio5-supply = <&vcc_3v3>;
|
||||
vccio6-supply = <&vcc_3v3>;
|
||||
vccio7-supply = <&vcc_3v3>;
|
||||
};
|
||||
|
||||
&saradc {
|
||||
vref-supply = <&vcca_1v8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
mmc-hs200-1_8v;
|
||||
non-removable;
|
||||
vmmc-supply = <&vcc_3v3>;
|
||||
vqmmc-supply = <&vcc_1v8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc0 {
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
|
||||
disable-wp;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
|
||||
sd-uhs-sdr104;
|
||||
vmmc-supply = <&vcc3v3_sd>;
|
||||
vqmmc-supply = <&vccio_sd>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc1 {
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
cap-sdio-irq;
|
||||
keep-power-in-suspend;
|
||||
mmc-pwrseq = <&sdio_pwrseq>;
|
||||
non-removable;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
|
||||
vmmc-supply = <&vcc3v3_sys>;
|
||||
vqmmc-supply = <&vcca1v8_pmu>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sfc {
|
||||
pinctrl-0 = <&fspi_pins>;
|
||||
pinctrl-names = "default";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <24000000>;
|
||||
spi-rx-bus-width = <4>;
|
||||
spi-tx-bus-width = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>;
|
||||
status = "okay";
|
||||
uart-has-rtscts;
|
||||
|
||||
bluetooth {
|
||||
compatible = "brcm,bcm4345c5";
|
||||
clocks = <&rk809 1>;
|
||||
clock-names = "lpo";
|
||||
device-wakeup-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
|
||||
host-wakeup-gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
|
||||
shutdown-gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
|
||||
vbat-supply = <&vcc3v3_sys>;
|
||||
vddio-supply = <&vcca1v8_pmu>;
|
||||
};
|
||||
};
|
||||
|
||||
/*
|
||||
* uart2_m0 is exposed on PI40
|
||||
* pin 8 - uart2_tx_m0
|
||||
* pin 10 - uart2_rx_m0
|
||||
*/
|
||||
&uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0_host {
|
||||
phy-supply = <&vcc5v0_usb30_host>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0_otg {
|
||||
phy-supply = <&vcc5v0_usb_otg>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy1_otg {
|
||||
phy-supply = <&vcc5v0_usb30_host>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_xhci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_xhci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
579
arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts
Normal file
579
arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts
Normal file
@@ -0,0 +1,579 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include "rk3566.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Firefly Station M2";
|
||||
compatible = "firefly,rk3566-roc-pc", "rockchip,rk3566";
|
||||
|
||||
aliases {
|
||||
mmc0 = &sdmmc0;
|
||||
mmc1 = &sdhci;
|
||||
mmc2 = &sdmmc1;
|
||||
};
|
||||
|
||||
chosen: chosen {
|
||||
stdout-path = "serial2:1500000n8";
|
||||
};
|
||||
|
||||
gmac1_clkin: external-gmac1-clock {
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <125000000>;
|
||||
clock-output-names = "gmac1_clkin";
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led-user {
|
||||
label = "user-led";
|
||||
default-state = "on";
|
||||
gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&user_led_enable_h>;
|
||||
retain-state-suspended;
|
||||
};
|
||||
};
|
||||
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
status = "okay";
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
clocks = <&rk809 1>;
|
||||
clock-names = "ext_clock";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_enable_h>;
|
||||
reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
usb_5v: usb-5v-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "usb_5v";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
|
||||
vcc5v0_sys: vcc5v0-sys-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&usb_5v>;
|
||||
};
|
||||
|
||||
vcc3v3_sys: vcc3v3-sys-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_sys";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc5v0_usb30_host: vcc5v0-usb30-host-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_usb30_host";
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_usb30_host_en_h>;
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_usb_otg";
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_usb_otg_en_h>;
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
};
|
||||
|
||||
&combphy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu1 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu2 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu3 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>;
|
||||
assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>;
|
||||
clock_in_out = "input";
|
||||
phy-mode = "rgmii-id";
|
||||
phy-supply = <&vcc_3v3>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gmac1m0_miim
|
||||
&gmac1m0_tx_bus2
|
||||
&gmac1m0_rx_bus2
|
||||
&gmac1m0_rgmii_clk
|
||||
&gmac1m0_clkinout
|
||||
&gmac1m0_rgmii_bus>;
|
||||
snps,reset-gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>;
|
||||
snps,reset-active-low;
|
||||
/* Reset time is 20ms, 100ms for rtl8211f */
|
||||
snps,reset-delays-us = <0 20000 100000>;
|
||||
tx_delay = <0x4f>;
|
||||
rx_delay = <0x24>;
|
||||
phy-handle = <&rgmii_phy1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
|
||||
vdd_cpu: regulator@1c {
|
||||
compatible = "tcs,tcs4525";
|
||||
reg = <0x1c>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_cpu";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1150000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
rk809: pmic@20 {
|
||||
compatible = "rockchip,rk809";
|
||||
reg = <0x20>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>;
|
||||
clock-output-names = "rk808-clkout1", "rk808-clkout2";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_int>;
|
||||
rockchip,system-power-controller;
|
||||
wakeup-source;
|
||||
#clock-cells = <1>;
|
||||
|
||||
vcc1-supply = <&vcc3v3_sys>;
|
||||
vcc2-supply = <&vcc3v3_sys>;
|
||||
vcc3-supply = <&vcc3v3_sys>;
|
||||
vcc4-supply = <&vcc3v3_sys>;
|
||||
vcc5-supply = <&vcc3v3_sys>;
|
||||
vcc6-supply = <&vcc3v3_sys>;
|
||||
vcc7-supply = <&vcc3v3_sys>;
|
||||
vcc8-supply = <&vcc3v3_sys>;
|
||||
vcc9-supply = <&vcc3v3_sys>;
|
||||
|
||||
regulators {
|
||||
vdd_log: DCDC_REG1 {
|
||||
regulator-name = "vdd_log";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-init-microvolt = <900000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <900000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_gpu: DCDC_REG2 {
|
||||
regulator-name = "vdd_gpu";
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-init-microvolt = <900000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <900000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_ddr: DCDC_REG3 {
|
||||
regulator-name = "vcc_ddr";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1100000>;
|
||||
regulator-max-microvolt = <1100000>;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_npu: DCDC_REG4 {
|
||||
regulator-name = "vdd_npu";
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8: DCDC_REG5 {
|
||||
regulator-name = "vcc_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdda0v9_image: LDO_REG1 {
|
||||
regulator-name = "vdda0v9_image";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <900000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdda_0v9: LDO_REG2 {
|
||||
regulator-name = "vdda_0v9";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <900000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdda0v9_pmu: LDO_REG3 {
|
||||
regulator-name = "vdda0v9_pmu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <900000>;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_acodec: LDO_REG4 {
|
||||
regulator-name = "vccio_acodec";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sd: LDO_REG5 {
|
||||
regulator-name = "vccio_sd";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_pmu: LDO_REG6 {
|
||||
regulator-name = "vcc3v3_pmu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca_1v8: LDO_REG7 {
|
||||
regulator-name = "vcca_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca1v8_pmu: LDO_REG8 {
|
||||
regulator-name = "vcca1v8_pmu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca1v8_image: LDO_REG9 {
|
||||
regulator-name = "vcca1v8_image";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3: SWITCH_REG1 {
|
||||
regulator-boot-on;
|
||||
regulator-name = "vcc3v3";
|
||||
};
|
||||
|
||||
vcc3v3_sd: SWITCH_REG2 {
|
||||
regulator-name = "vcc3v3_sd";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c3m1_xfer>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c5 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdio1 {
|
||||
rgmii_phy1: ethernet-phy@0 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <0x0>;
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
bt {
|
||||
bt_enable_h: bt-enable-h {
|
||||
rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
bt_host_wake_l: bt-host-wake-l {
|
||||
rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
|
||||
bt_wake_l: bt-wake-l {
|
||||
rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
user_led_enable_h: user-led-enable-h {
|
||||
rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pmic {
|
||||
pmic_int: pmic_int {
|
||||
rockchip,pins =
|
||||
<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
sdio-pwrseq {
|
||||
wifi_enable_h: wifi-enable-h {
|
||||
rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
usb {
|
||||
vcc5v0_usb30_host_en_h: vcc5v0-usb30-host-en_h {
|
||||
rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
vcc5v0_usb_otg_en_h: vcc5v0-usb-otg-en_h {
|
||||
rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pmu_io_domains {
|
||||
status = "okay";
|
||||
pmuio1-supply = <&vcc3v3_pmu>;
|
||||
pmuio2-supply = <&vcc3v3_pmu>;
|
||||
vccio1-supply = <&vccio_acodec>;
|
||||
vccio2-supply = <&vcc_1v8>;
|
||||
vccio3-supply = <&vccio_sd>;
|
||||
vccio4-supply = <&vcc_1v8>;
|
||||
vccio5-supply = <&vcc_3v3>;
|
||||
vccio6-supply = <&vcc_1v8>;
|
||||
vccio7-supply = <&vcc_3v3>;
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
mmc-hs200-1_8v;
|
||||
non-removable;
|
||||
vmmc-supply = <&vcc_3v3>;
|
||||
vqmmc-supply = <&vcc_1v8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc0 {
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
|
||||
disable-wp;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
|
||||
sd-uhs-sdr104;
|
||||
vmmc-supply = <&vcc3v3_sd>;
|
||||
vqmmc-supply = <&vccio_sd>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc1 {
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
cap-sdio-irq;
|
||||
keep-power-in-suspend;
|
||||
mmc-pwrseq = <&sdio_pwrseq>;
|
||||
vmmc-supply = <&vcc3v3_sys>;
|
||||
vqmmc-supply = <&vcca1v8_pmu>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_xfer>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn>;
|
||||
status = "okay";
|
||||
uart-has-rtscts;
|
||||
|
||||
bluetooth {
|
||||
compatible = "brcm,bcm43438-bt";
|
||||
clocks = <&rk809 1>;
|
||||
clock-names = "lpo";
|
||||
device-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
|
||||
host-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
|
||||
shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
|
||||
vbat-supply = <&vcc3v3_sys>;
|
||||
vddio-supply = <&vcca1v8_pmu>;
|
||||
};
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0_host {
|
||||
phy-supply = <&vcc5v0_usb30_host>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0_otg {
|
||||
phy-supply = <&vcc5v0_usb_otg>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy1_otg {
|
||||
phy-supply = <&vcc5v0_usb30_host>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_xhci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_xhci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
177
arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts
Normal file
177
arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts
Normal file
@@ -0,0 +1,177 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "rk3566-soquartz.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Pine64 RK3566 SoQuartz with CM4-IO Carrier Board";
|
||||
compatible = "pine64,soquartz-cm4io", "pine64,soquartz", "rockchip,rk3566";
|
||||
|
||||
/* labeled +12v in schematic */
|
||||
vcc12v_dcin: vcc12v-dcin-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc12v_dcin";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
};
|
||||
|
||||
/* labeled +5v in schematic */
|
||||
vcc_5v: vcc-5v-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_5v";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc12v_dcin>;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/*
|
||||
* i2c1 is exposed on CM1 / Module1A
|
||||
* pin 80 - SCL0 - i2c1_scl_m0, pullup to vcc3v3_pmu
|
||||
* pin 82 - SDA0 - i2c1_sda_m0, pullup to vcc3v3_pmu
|
||||
*/
|
||||
&i2c1 {
|
||||
status = "okay";
|
||||
|
||||
/*
|
||||
* the rtc interrupt is tied to PMIC_PWRON,
|
||||
* it will force reset the board if triggered.
|
||||
*/
|
||||
pcf85063: rtc@51 {
|
||||
compatible = "nxp,pcf85063";
|
||||
reg = <0x51>;
|
||||
};
|
||||
};
|
||||
|
||||
/*
|
||||
* i2c2 is exposed on CM1 / Module1A - to PI40
|
||||
* pin 56 - GPIO3 - i2c2_scl_m1, pullup to vcc_3v3, shared with i2s1_8ch
|
||||
* pin 58 - GPIO2 - i2c2_sda_m1, pullup to vcc_3v3
|
||||
*/
|
||||
&i2c2 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
/*
|
||||
* i2c3 is exposed on CM1 / Module1A - to PI40
|
||||
* pin 35 - ID_SC(GPIO28) - i2c3_scl_m0, pullup to vcc_3v3
|
||||
* pin 36 - ID_SD(GPIO27) - i2c3_sda_m0, pullup to vcc_3v3
|
||||
*/
|
||||
&i2c3 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
/*
|
||||
* i2c4 is exposed on CM2 / Module1B - to PI40
|
||||
* pin 45 - GPIO24 - i2c4_scl_m1
|
||||
* pin 47 - GPIO23 - i2c4_sda_m1
|
||||
*/
|
||||
&i2c4 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
/*
|
||||
* i2s1_8ch is exposed on CM1 / Module1A - to PI40
|
||||
* pin 24 - GPIO26 - i2s1_sdi1_m1
|
||||
* pin 25 - GPIO21 - i2s1_sdo0_m1
|
||||
* pin 26 - GPIO19 - i2s1_lrck_tx_m1
|
||||
* pin 27 - GPIO20 - i2s1_sdi0_m1
|
||||
* pin 29 - GPIO16 - i2s1_sdi3_m1
|
||||
* pin 30 - GPIO6 - i2s1_sdi2_m1
|
||||
* pin 40 - GPIO9 - i2s1_sdo1_m1, shared with spi3
|
||||
* pin 41 - GPIO25 - i2s1_sdo2_m1
|
||||
* pin 49 - GPIO18 - i2s1_sclk_tx_m1
|
||||
* pin 50 - GPIO17 - i2s1_mclk_m1
|
||||
* pin 56 - GPIO3 - i2s1_sdo3_m1, shared with i2c2
|
||||
*/
|
||||
&i2s1_8ch {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&led_diy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&led_work {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rgmii_phy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/*
|
||||
* saradc is exposed on CM1 / Module1A - to J2
|
||||
* pin 94 - AIN1 - saradc_vin3
|
||||
* pin 96 - AIN0 - saradc_vin2
|
||||
*/
|
||||
&saradc {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&sdmmc0 {
|
||||
vmmc-supply = <&sdmmc_pwr>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc_pwr {
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/*
|
||||
* spi3 is exposed on CM1 / Module1A - to PI40
|
||||
* pin 37 - GPIO7 - spi3_cs1_m0
|
||||
* pin 38 - GPIO11 - spi3_clk_m0
|
||||
* pin 39 - GPIO8 - spi3_cs0_m0
|
||||
* pin 40 - GPIO9 - spi3_miso_m0, shared with i2s1_8ch
|
||||
* pin 44 - GPIO10 - spi3_mosi_m0
|
||||
*/
|
||||
&spi3 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
/*
|
||||
* uart2 is exposed on CM1 / Module1A - to PI40
|
||||
* pin 51 - GPIO15 - uart2_rx_m0
|
||||
* pin 55 - GPIO14 - uart2_tx_m0
|
||||
*/
|
||||
&uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/*
|
||||
* uart7 is exposed on CM1 / Module1A - to PI40
|
||||
* pin 46 - GPIO22 - uart7_tx_m2
|
||||
* pin 47 - GPIO23 - uart7_rx_m2
|
||||
*/
|
||||
&uart7 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0_otg {
|
||||
phy-supply = <&vcc_5v>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_xhci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vbus {
|
||||
vin-supply = <&vcc_5v>;
|
||||
};
|
||||
616
arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi
Normal file
616
arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi
Normal file
@@ -0,0 +1,616 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include "rk3566.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Pine64 RK3566 SoQuartz SOM";
|
||||
compatible = "pine64,soquartz", "rockchip,rk3566";
|
||||
|
||||
aliases {
|
||||
ethernet0 = &gmac1;
|
||||
mmc0 = &sdmmc0;
|
||||
mmc1 = &sdhci;
|
||||
mmc2 = &sdmmc1;
|
||||
};
|
||||
|
||||
chosen: chosen {
|
||||
stdout-path = "serial2:1500000n8";
|
||||
};
|
||||
|
||||
gmac1_clkin: external-gmac1-clock {
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <125000000>;
|
||||
clock-output-names = "gmac1_clkin";
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_diy: led-diy {
|
||||
label = "diy-led";
|
||||
default-state = "on";
|
||||
gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&diy_led_enable_h>;
|
||||
retain-state-suspended;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
led_work: led-work {
|
||||
label = "work-led";
|
||||
default-state = "off";
|
||||
gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&work_led_enable_h>;
|
||||
retain-state-suspended;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
status = "okay";
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
clocks = <&rk809 1>;
|
||||
clock-names = "ext_clock";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_enable_h>;
|
||||
reset-gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
vbus: vbus-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vbus";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
|
||||
/* sourced from vbus, vbus is provided by the carrier board */
|
||||
vcc5v0_sys: vcc5v0-sys-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vbus>;
|
||||
};
|
||||
|
||||
vcc3v3_sys: vcc3v3-sys-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
sdmmc_pwr: sdmmc-pwr-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc_pwr_h>;
|
||||
regulator-name = "sdmmc_pwr";
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu1 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu2 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu3 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>;
|
||||
assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>;
|
||||
clock_in_out = "input";
|
||||
phy-supply = <&vcc_3v3>;
|
||||
phy-mode = "rgmii";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gmac1m0_miim
|
||||
&gmac1m0_tx_bus2
|
||||
&gmac1m0_rx_bus2
|
||||
&gmac1m0_rgmii_clk
|
||||
&gmac1m0_clkinout
|
||||
&gmac1m0_rgmii_bus>;
|
||||
snps,reset-gpio = <&gpio0 RK_PC3 GPIO_ACTIVE_LOW>;
|
||||
snps,reset-active-low;
|
||||
/* Reset time is 20ms, 100ms for rtl8211f, also works well here */
|
||||
snps,reset-delays-us = <0 20000 100000>;
|
||||
tx_delay = <0x30>;
|
||||
rx_delay = <0x10>;
|
||||
phy-handle = <&rgmii_phy1>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
|
||||
vdd_cpu: regulator@1c {
|
||||
compatible = "tcs,tcs4525";
|
||||
reg = <0x1c>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_cpu";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1150000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
rk809: pmic@20 {
|
||||
compatible = "rockchip,rk809";
|
||||
reg = <0x20>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
|
||||
#clock-cells = <1>;
|
||||
clock-output-names = "rk808-clkout1", "rk808-clkout2";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_int_l>;
|
||||
rockchip,system-power-controller;
|
||||
wakeup-source;
|
||||
|
||||
vcc1-supply = <&vcc3v3_sys>;
|
||||
vcc2-supply = <&vcc3v3_sys>;
|
||||
vcc3-supply = <&vcc3v3_sys>;
|
||||
vcc4-supply = <&vcc3v3_sys>;
|
||||
vcc5-supply = <&vcc3v3_sys>;
|
||||
vcc6-supply = <&vcc3v3_sys>;
|
||||
vcc7-supply = <&vcc3v3_sys>;
|
||||
vcc8-supply = <&vcc3v3_sys>;
|
||||
vcc9-supply = <&vcc3v3_sys>;
|
||||
|
||||
regulators {
|
||||
vdd_logic: DCDC_REG1 {
|
||||
regulator-name = "vdd_logic";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-init-microvolt = <900000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <900000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_gpu: DCDC_REG2 {
|
||||
regulator-name = "vdd_gpu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-init-microvolt = <900000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_ddr: DCDC_REG3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-name = "vcc_ddr";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_npu: DCDC_REG4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-init-microvolt = <900000>;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-name = "vdd_npu";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8: DCDC_REG5 {
|
||||
regulator-name = "vcc_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdda0v9_image: LDO_REG1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-name = "vdda0v9_image";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <900000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdda_0v9: LDO_REG2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-name = "vdda_0v9";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda0v9_pmu: LDO_REG3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-name = "vdda0v9_pmu";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <900000>;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_acodec: LDO_REG4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vccio_acodec";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sd: LDO_REG5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vccio_sd";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_pmu: LDO_REG6 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc3v3_pmu";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca_1v8: LDO_REG7 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcca_1v8";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcca1v8_pmu: LDO_REG8 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcca1v8_pmu";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcca1v8_image: LDO_REG9 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcca1v8_image";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3: SWITCH_REG1 {
|
||||
regulator-name = "vcc_3v3";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_sd: SWITCH_REG2 {
|
||||
regulator-name = "vcc3v3_sd";
|
||||
status = "disabled";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/*
|
||||
* i2c1 is exposed on CM1 / Module1A
|
||||
* pin 80 - i2c1_scl_m0, pullup to vcc3v3_pmu
|
||||
* pin 82 - i2c1_sda_m0, pullup to vcc3v3_pmu
|
||||
*/
|
||||
&i2c1 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
/*
|
||||
* i2c2 is exposed on CM1 / Module1A
|
||||
* pin 56 - i2c2_scl_m1, pullup to vcc_3v3, shared with i2s1_8ch
|
||||
* pin 58 - i2c2_sda_m1, pullup to vcc_3v3
|
||||
*/
|
||||
&i2c2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c2m1_xfer>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
/*
|
||||
* i2c3 is exposed on CM1 / Module1A
|
||||
* pin 35 - i2c3_scl_m0, pullup to vcc_3v3
|
||||
* pin 36 - i2c3_sda_m0, pullup to vcc_3v3
|
||||
*/
|
||||
&i2c3 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
/*
|
||||
* i2c4 is exposed on CM2 / Module1B
|
||||
* pin 45 - i2c4_scl_m1
|
||||
* pin 47 - i2c4_sda_m1
|
||||
*/
|
||||
&i2c4 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c4m1_xfer>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
/*
|
||||
* i2s1_8ch is exposed on CM1 / Module1A
|
||||
* pin 24 - i2s1_sdi1_m1
|
||||
* pin 25 - i2s1_sdo0_m1
|
||||
* pin 26 - i2s1_lrck_tx_m1
|
||||
* pin 27 - i2s1_sdi0_m1
|
||||
* pin 29 - i2s1_sdi3_m1
|
||||
* pin 30 - i2s1_sdi2_m1
|
||||
* pin 40 - i2s1_sdo1_m1, shared with spi3
|
||||
* pin 41 - i2s1_sdo2_m1
|
||||
* pin 49 - i2s1_sclk_tx_m1
|
||||
* pin 50 - i2s1_mclk_m1
|
||||
* pin 56 - i2s1_sdo3_m1, shared with i2c2
|
||||
*/
|
||||
&i2s1_8ch {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2s1m1_sclktx &i2s1m1_sclkrx
|
||||
&i2s1m1_lrcktx &i2s1m1_lrckrx
|
||||
&i2s1m1_sdi0 &i2s1m1_sdi1
|
||||
&i2s1m1_sdi2 &i2s1m1_sdi3
|
||||
&i2s1m1_sdo0 &i2s1m1_sdo1
|
||||
&i2s1m1_sdo2 &i2s1m1_sdo3>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&mdio1 {
|
||||
rgmii_phy1: ethernet-phy@0 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
bt {
|
||||
bt_enable_h: bt-enable-h {
|
||||
rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
bt_host_wake_l: bt-host-wake-l {
|
||||
rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
|
||||
bt_wake_l: bt-wake-l {
|
||||
rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
work_led_enable_h: work-led-enable-h {
|
||||
rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
diy_led_enable_h: diy-led-enable-h {
|
||||
rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pmic {
|
||||
pmic_int_l: pmic-int-l {
|
||||
rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
sdio-pwrseq {
|
||||
wifi_enable_h: wifi-enable-h {
|
||||
rockchip,pins = <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
sdmmc-pwr {
|
||||
sdmmc_pwr_h: sdmmc-pwr-h {
|
||||
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pmu_io_domains {
|
||||
pmuio1-supply = <&vcc3v3_pmu>;
|
||||
pmuio2-supply = <&vcc3v3_pmu>;
|
||||
vccio1-supply = <&vcc_3v3>;
|
||||
vccio2-supply = <&vcc_1v8>;
|
||||
vccio3-supply = <&vccio_sd>;
|
||||
vccio4-supply = <&vcc_1v8>;
|
||||
vccio5-supply = <&vcc_3v3>;
|
||||
vccio6-supply = <&vcc_3v3>;
|
||||
vccio7-supply = <&vcc_3v3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/*
|
||||
* saradc is exposed on CM1 / Module1A
|
||||
* pin 94 - saradc_vin3
|
||||
* pin 96 - saradc_vin2
|
||||
*/
|
||||
&saradc {
|
||||
vref-supply = <&vcca_1v8>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
mmc-hs200-1_8v;
|
||||
non-removable;
|
||||
vmmc-supply = <&vcc_3v3>;
|
||||
vqmmc-supply = <&vcc_1v8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc0 {
|
||||
broken-cd;
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
disable-wp;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
|
||||
vqmmc-supply = <&vccio_sd>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&sdmmc1 {
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
cap-sdio-irq;
|
||||
keep-power-in-suspend;
|
||||
mmc-pwrseq = <&sdio_pwrseq>;
|
||||
non-removable;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
|
||||
sd-uhs-sdr104;
|
||||
vmmc-supply = <&vcc3v3_sys>;
|
||||
vqmmc-supply = <&vcc_1v8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/*
|
||||
* spi3 is exposed on CM1 / Module1A
|
||||
* pin 37 - spi3_cs1_m0
|
||||
* pin 38 - spi3_clk_m0
|
||||
* pin 39 - spi3_cs0_m0
|
||||
* pin 40 - spi3_miso_m0, shared with i2s1_8ch
|
||||
* pin 44 - spi3_mosi_m0
|
||||
*/
|
||||
&spi3 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>;
|
||||
uart-has-rtscts;
|
||||
status = "okay";
|
||||
|
||||
bluetooth {
|
||||
compatible = "brcm,bcm43438-bt";
|
||||
clocks = <&rk809 1>;
|
||||
clock-names = "lpo";
|
||||
device-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
|
||||
host-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
|
||||
shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
|
||||
vbat-supply = <&vcc3v3_sys>;
|
||||
vddio-supply = <&vcca1v8_pmu>;
|
||||
};
|
||||
};
|
||||
|
||||
/*
|
||||
* uart2 is exposed on CM1 / Module1A
|
||||
* pin 51 - uart2_rx_m0
|
||||
* pin 55 - uart2_tx_m0
|
||||
*/
|
||||
&uart2 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
/*
|
||||
* uart7 is exposed on CM1 / Module1A
|
||||
* pin 46 - uart7_tx_m2
|
||||
* pin 47 - uart7_rx_m2
|
||||
*/
|
||||
&uart7 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart7m2_xfer>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
/* dwc3_otg is the only usb port available */
|
||||
&usb2phy0 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&usb2phy0_otg {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&usb_host0_xhci {
|
||||
status = "disabled";
|
||||
};
|
||||
@@ -6,6 +6,10 @@ / {
|
||||
compatible = "rockchip,rk3566";
|
||||
};
|
||||
|
||||
&pipegrf {
|
||||
compatible = "rockchip,rk3566-pipe-grf", "syscon";
|
||||
};
|
||||
|
||||
&power {
|
||||
power-domain@RK3568_PD_PIPE {
|
||||
reg = <RK3568_PD_PIPE>;
|
||||
@@ -18,3 +22,10 @@ power-domain@RK3568_PD_PIPE {
|
||||
#power-domain-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&usb_host0_xhci {
|
||||
phys = <&usb2phy0_otg>;
|
||||
phy-names = "usb2-phy";
|
||||
extcon = <&usb2phy0>;
|
||||
maximum-speed = "high-speed";
|
||||
};
|
||||
|
||||
@@ -72,6 +72,55 @@ vcc5v0_sys: vcc5v0-sys {
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&dc_12v>;
|
||||
};
|
||||
|
||||
vcc5v0_usb: vcc5v0_usb {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_usb";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&dc_12v>;
|
||||
};
|
||||
|
||||
vcc5v0_usb_host: vcc5v0-usb-host {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_usb_host_en>;
|
||||
regulator-name = "vcc5v0_usb_host";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc5v0_usb>;
|
||||
};
|
||||
|
||||
vcc5v0_usb_otg: vcc5v0-usb-otg {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_usb_otg_en>;
|
||||
regulator-name = "vcc5v0_usb_otg";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc5v0_usb>;
|
||||
};
|
||||
};
|
||||
|
||||
&combphy0 {
|
||||
/* used for USB3 */
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&combphy1 {
|
||||
/* used for USB3 */
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&combphy2 {
|
||||
/* used for SATA */
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gmac0 {
|
||||
@@ -338,6 +387,16 @@ pmic_int: pmic_int {
|
||||
<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
usb {
|
||||
vcc5v0_usb_host_en: vcc5v0_usb_host_en {
|
||||
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
vcc5v0_usb_otg_en: vcc5v0_usb_otg_en {
|
||||
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pmu_io_domains {
|
||||
@@ -400,6 +459,10 @@ &saradc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sata2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
max-frequency = <200000000>;
|
||||
@@ -455,3 +518,42 @@ &uart9 {
|
||||
pinctrl-0 = <&uart9m1_xfer>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_xhci {
|
||||
extcon = <&usb2phy0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_xhci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0_host {
|
||||
phy-supply = <&vcc5v0_usb_host>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0_otg {
|
||||
phy-supply = <&vcc5v0_usb_otg>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
@@ -103,6 +103,18 @@ vcc5v0_usb_host: vcc5v0-usb-host {
|
||||
vin-supply = <&vcc5v0_usb>;
|
||||
};
|
||||
|
||||
vcc5v0_usb_otg: vcc5v0-usb-otg {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_usb_otg_en>;
|
||||
regulator-name = "vcc5v0_usb_otg";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc5v0_usb>;
|
||||
};
|
||||
|
||||
vcc3v3_lcd0_n: vcc3v3-lcd0-n {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_lcd0_n";
|
||||
@@ -136,6 +148,14 @@ regulator-state-mem {
|
||||
};
|
||||
};
|
||||
|
||||
&combphy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&combphy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
@@ -507,6 +527,9 @@ usb {
|
||||
vcc5v0_usb_host_en: vcc5v0_usb_host_en {
|
||||
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
vcc5v0_usb_otg_en: vcc5v0_usb_otg_en {
|
||||
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
@@ -568,6 +591,11 @@ &usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_xhci {
|
||||
extcon = <&usb2phy0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
@@ -576,6 +604,24 @@ &usb_host1_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_xhci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0_host {
|
||||
phy-supply = <&vcc5v0_usb_host>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0_otg {
|
||||
vbus-supply = <&vcc5v0_usb_otg>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
562
arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
Normal file
562
arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
Normal file
@@ -0,0 +1,562 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include "rk3568.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Radxa ROCK3 Model A";
|
||||
compatible = "radxa,rock3a", "rockchip,rk3568";
|
||||
|
||||
aliases {
|
||||
ethernet0 = &gmac1;
|
||||
mmc0 = &sdmmc0;
|
||||
mmc1 = &sdhci;
|
||||
};
|
||||
|
||||
chosen: chosen {
|
||||
stdout-path = "serial2:1500000n8";
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_user: led-0 {
|
||||
gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
|
||||
function = LED_FUNCTION_HEARTBEAT;
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&led_user_en>;
|
||||
};
|
||||
};
|
||||
|
||||
rk809-sound {
|
||||
compatible = "simple-audio-card";
|
||||
simple-audio-card,format = "i2s";
|
||||
simple-audio-card,name = "Analog RK809";
|
||||
simple-audio-card,mclk-fs = <256>;
|
||||
|
||||
simple-audio-card,cpu {
|
||||
sound-dai = <&i2s1_8ch>;
|
||||
};
|
||||
|
||||
simple-audio-card,codec {
|
||||
sound-dai = <&rk809>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc12v_dcin: vcc12v-dcin {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc12v_dcin";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vcc3v3_sys: vcc3v3-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc12v_dcin>;
|
||||
};
|
||||
|
||||
vcc5v0_sys: vcc5v0-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc12v_dcin>;
|
||||
};
|
||||
|
||||
vcc5v0_usb: vcc5v0-usb {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_usb";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc12v_dcin>;
|
||||
};
|
||||
|
||||
vcc5v0_usb_host: vcc5v0-usb-host {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_usb_host_en>;
|
||||
regulator-name = "vcc5v0_usb_host";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc5v0_usb>;
|
||||
};
|
||||
|
||||
vcc5v0_usb_hub: vcc5v0-usb-hub-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_usb_hub_en>;
|
||||
regulator-name = "vcc5v0_usb_hub";
|
||||
regulator-always-on;
|
||||
vin-supply = <&vcc5v0_usb>;
|
||||
};
|
||||
|
||||
vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_usb_otg_en>;
|
||||
regulator-name = "vcc5v0_usb_otg";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc5v0_usb>;
|
||||
};
|
||||
};
|
||||
|
||||
&combphy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&combphy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu1 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu2 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu3 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
|
||||
assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>;
|
||||
assigned-clock-rates = <0>, <125000000>;
|
||||
clock_in_out = "output";
|
||||
phy-handle = <&rgmii_phy1>;
|
||||
phy-mode = "rgmii-id";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gmac1m1_miim
|
||||
&gmac1m1_tx_bus2
|
||||
&gmac1m1_rx_bus2
|
||||
&gmac1m1_rgmii_clk
|
||||
&gmac1m1_rgmii_bus>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpu {
|
||||
mali-supply = <&vdd_gpu>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
|
||||
vdd_cpu: regulator@1c {
|
||||
compatible = "tcs,tcs4525";
|
||||
reg = <0x1c>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_cpu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1150000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
rk809: pmic@20 {
|
||||
compatible = "rockchip,rk809";
|
||||
reg = <0x20>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
|
||||
assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
|
||||
assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
|
||||
#clock-cells = <1>;
|
||||
clock-names = "mclk";
|
||||
clocks = <&cru I2S1_MCLKOUT_TX>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_int>, <&i2s1m0_mclk>;
|
||||
rockchip,system-power-controller;
|
||||
#sound-dai-cells = <0>;
|
||||
vcc1-supply = <&vcc3v3_sys>;
|
||||
vcc2-supply = <&vcc3v3_sys>;
|
||||
vcc3-supply = <&vcc3v3_sys>;
|
||||
vcc4-supply = <&vcc3v3_sys>;
|
||||
vcc5-supply = <&vcc3v3_sys>;
|
||||
vcc6-supply = <&vcc3v3_sys>;
|
||||
vcc7-supply = <&vcc3v3_sys>;
|
||||
vcc8-supply = <&vcc3v3_sys>;
|
||||
vcc9-supply = <&vcc3v3_sys>;
|
||||
wakeup-source;
|
||||
|
||||
regulators {
|
||||
vdd_logic: DCDC_REG1 {
|
||||
regulator-name = "vdd_logic";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-init-microvolt = <900000>;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_gpu: DCDC_REG2 {
|
||||
regulator-name = "vdd_gpu";
|
||||
regulator-always-on;
|
||||
regulator-init-microvolt = <900000>;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_ddr: DCDC_REG3 {
|
||||
regulator-name = "vcc_ddr";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-initial-mode = <0x2>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_npu: DCDC_REG4 {
|
||||
regulator-name = "vdd_npu";
|
||||
regulator-init-microvolt = <900000>;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8: DCDC_REG5 {
|
||||
regulator-name = "vcc_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda0v9_image: LDO_REG1 {
|
||||
regulator-name = "vdda0v9_image";
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda_0v9: LDO_REG2 {
|
||||
regulator-name = "vdda_0v9";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda0v9_pmu: LDO_REG3 {
|
||||
regulator-name = "vdda0v9_pmu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <900000>;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_acodec: LDO_REG4 {
|
||||
regulator-name = "vccio_acodec";
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sd: LDO_REG5 {
|
||||
regulator-name = "vccio_sd";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_pmu: LDO_REG6 {
|
||||
regulator-name = "vcc3v3_pmu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca_1v8: LDO_REG7 {
|
||||
regulator-name = "vcca_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcca1v8_pmu: LDO_REG8 {
|
||||
regulator-name = "vcca1v8_pmu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca1v8_image: LDO_REG9 {
|
||||
regulator-name = "vcca1v8_image";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3: SWITCH_REG1 {
|
||||
regulator-name = "vcc_3v3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_sd: SWITCH_REG2 {
|
||||
regulator-name = "vcc3v3_sd";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
codec {
|
||||
mic-in-differential;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2s1_8ch {
|
||||
rockchip,trcm-sync-tx-only;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdio1 {
|
||||
rgmii_phy1: ethernet-phy@0 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <0x0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <ð_phy_rst>;
|
||||
reset-assert-us = <20000>;
|
||||
reset-deassert-us = <100000>;
|
||||
reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
ethernet {
|
||||
eth_phy_rst: eth_phy_rst {
|
||||
rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
led_user_en: led_user_en {
|
||||
rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pmic {
|
||||
pmic_int: pmic_int {
|
||||
rockchip,pins =
|
||||
<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
usb {
|
||||
vcc5v0_usb_host_en: vcc5v0_usb_host_en {
|
||||
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
vcc5v0_usb_hub_en: vcc5v0_usb_hub_en {
|
||||
rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
vcc5v0_usb_otg_en: vcc5v0_usb_otg_en {
|
||||
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pmu_io_domains {
|
||||
pmuio1-supply = <&vcc3v3_pmu>;
|
||||
pmuio2-supply = <&vcc3v3_pmu>;
|
||||
vccio1-supply = <&vccio_acodec>;
|
||||
vccio2-supply = <&vcc_1v8>;
|
||||
vccio3-supply = <&vccio_sd>;
|
||||
vccio4-supply = <&vcc_1v8>;
|
||||
vccio5-supply = <&vcc_3v3>;
|
||||
vccio6-supply = <&vcc_1v8>;
|
||||
vccio7-supply = <&vcc_3v3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
vref-supply = <&vcca_1v8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
max-frequency = <200000000>;
|
||||
non-removable;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
|
||||
vmmc-supply = <&vcc_3v3>;
|
||||
vqmmc-supply = <&vcc_1v8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc0 {
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
|
||||
disable-wp;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
|
||||
sd-uhs-sdr104;
|
||||
vmmc-supply = <&vcc3v3_sd>;
|
||||
vqmmc-supply = <&vccio_sd>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
rockchip,hw-tshut-mode = <1>;
|
||||
rockchip,hw-tshut-polarity = <0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_xhci {
|
||||
extcon = <&usb2phy0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_xhci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0_host {
|
||||
phy-supply = <&vcc5v0_usb_host>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0_otg {
|
||||
vbus-supply = <&vcc5v0_usb_otg>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy1_host {
|
||||
phy-supply = <&vcc5v0_usb_host>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy1_otg {
|
||||
phy-supply = <&vcc5v0_usb_host>;
|
||||
status = "okay";
|
||||
};
|
||||
@@ -8,6 +8,20 @@
|
||||
/ {
|
||||
compatible = "rockchip,rk3568";
|
||||
|
||||
sata0: sata@fc000000 {
|
||||
compatible = "rockchip,rk3568-dwc-ahci", "snps,dwc-ahci";
|
||||
reg = <0 0xfc000000 0 0x1000>;
|
||||
clocks = <&cru ACLK_SATA0>, <&cru CLK_SATA0_PMALIVE>,
|
||||
<&cru CLK_SATA0_RXOOB>;
|
||||
clock-names = "sata", "pmalive", "rxoob";
|
||||
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
|
||||
phys = <&combphy0 PHY_TYPE_SATA>;
|
||||
phy-names = "sata-phy";
|
||||
ports-implemented = <0x1>;
|
||||
power-domains = <&power RK3568_PD_PIPE>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pipe_phy_grf0: syscon@fdc70000 {
|
||||
compatible = "rockchip,rk3568-pipe-phy-grf", "syscon";
|
||||
reg = <0x0 0xfdc70000 0x0 0x1000>;
|
||||
@@ -99,6 +113,10 @@ opp-1992000000 {
|
||||
};
|
||||
};
|
||||
|
||||
&pipegrf {
|
||||
compatible = "rockchip,rk3568-pipe-grf", "syscon";
|
||||
};
|
||||
|
||||
&power {
|
||||
power-domain@RK3568_PD_PIPE {
|
||||
reg = <RK3568_PD_PIPE>;
|
||||
@@ -114,3 +132,8 @@ power-domain@RK3568_PD_PIPE {
|
||||
#power-domain-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&usb_host0_xhci {
|
||||
phys = <&usb2phy0_otg>, <&combphy0 PHY_TYPE_USB3>;
|
||||
phy-names = "usb2-phy", "usb3-phy";
|
||||
};
|
||||
|
||||
@@ -230,6 +230,68 @@ scmi_shmem: sram@0 {
|
||||
};
|
||||
};
|
||||
|
||||
sata1: sata@fc400000 {
|
||||
compatible = "rockchip,rk3568-dwc-ahci", "snps,dwc-ahci";
|
||||
reg = <0 0xfc400000 0 0x1000>;
|
||||
clocks = <&cru ACLK_SATA1>, <&cru CLK_SATA1_PMALIVE>,
|
||||
<&cru CLK_SATA1_RXOOB>;
|
||||
clock-names = "sata", "pmalive", "rxoob";
|
||||
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
|
||||
phys = <&combphy1 PHY_TYPE_SATA>;
|
||||
phy-names = "sata-phy";
|
||||
ports-implemented = <0x1>;
|
||||
power-domains = <&power RK3568_PD_PIPE>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sata2: sata@fc800000 {
|
||||
compatible = "rockchip,rk3568-dwc-ahci", "snps,dwc-ahci";
|
||||
reg = <0 0xfc800000 0 0x1000>;
|
||||
clocks = <&cru ACLK_SATA2>, <&cru CLK_SATA2_PMALIVE>,
|
||||
<&cru CLK_SATA2_RXOOB>;
|
||||
clock-names = "sata", "pmalive", "rxoob";
|
||||
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
|
||||
phys = <&combphy2 PHY_TYPE_SATA>;
|
||||
phy-names = "sata-phy";
|
||||
ports-implemented = <0x1>;
|
||||
power-domains = <&power RK3568_PD_PIPE>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
usb_host0_xhci: usb@fcc00000 {
|
||||
compatible = "rockchip,rk3568-dwc3", "snps,dwc3";
|
||||
reg = <0x0 0xfcc00000 0x0 0x400000>;
|
||||
interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cru CLK_USB3OTG0_REF>, <&cru CLK_USB3OTG0_SUSPEND>,
|
||||
<&cru ACLK_USB3OTG0>;
|
||||
clock-names = "ref_clk", "suspend_clk",
|
||||
"bus_clk";
|
||||
dr_mode = "otg";
|
||||
phy_type = "utmi_wide";
|
||||
power-domains = <&power RK3568_PD_PIPE>;
|
||||
resets = <&cru SRST_USB3OTG0>;
|
||||
snps,dis_u2_susphy_quirk;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
usb_host1_xhci: usb@fd000000 {
|
||||
compatible = "rockchip,rk3568-dwc3", "snps,dwc3";
|
||||
reg = <0x0 0xfd000000 0x0 0x400000>;
|
||||
interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cru CLK_USB3OTG1_REF>, <&cru CLK_USB3OTG1_SUSPEND>,
|
||||
<&cru ACLK_USB3OTG1>;
|
||||
clock-names = "ref_clk", "suspend_clk",
|
||||
"bus_clk";
|
||||
dr_mode = "host";
|
||||
phys = <&usb2phy0_host>, <&combphy1 PHY_TYPE_USB3>;
|
||||
phy-names = "usb2-phy", "usb3-phy";
|
||||
phy_type = "utmi_wide";
|
||||
power-domains = <&power RK3568_PD_PIPE>;
|
||||
resets = <&cru SRST_USB3OTG1>;
|
||||
snps,dis_u2_susphy_quirk;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
gic: interrupt-controller@fd400000 {
|
||||
compatible = "arm,gic-v3";
|
||||
reg = <0x0 0xfd400000 0 0x10000>, /* GICD */
|
||||
@@ -297,7 +359,6 @@ pmu_io_domains: io-domains {
|
||||
};
|
||||
|
||||
pipegrf: syscon@fdc50000 {
|
||||
compatible = "rockchip,rk3568-pipe-grf", "syscon";
|
||||
reg = <0x0 0xfdc50000 0x0 0x1000>;
|
||||
};
|
||||
|
||||
@@ -717,6 +778,17 @@ sdmmc1: mmc@fe2c0000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sfc: spi@fe300000 {
|
||||
compatible = "rockchip,sfc";
|
||||
reg = <0x0 0xfe300000 0x0 0x4000>;
|
||||
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>;
|
||||
clock-names = "clk_sfc", "hclk_sfc";
|
||||
pinctrl-0 = <&fspi_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sdhci: mmc@fe310000 {
|
||||
compatible = "rockchip,rk3568-dwcmshc";
|
||||
reg = <0x0 0xfe310000 0x0 0x10000>;
|
||||
|
||||
Reference in New Issue
Block a user