arm64: dts: imx8mp-beacon: Enable DW HDMI Bridge

There is a second HDMI connector on the baseboard which is routed
to the DW HDMI bridge through the PVI to the LCDIF3 and requires the
HDMI PHY to be enabled too.

Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This commit is contained in:
Adam Ford
2024-08-19 18:18:14 -05:00
committed by Shawn Guo
parent 96aaa0a893
commit 7b1e0e8568

View File

@@ -105,6 +105,17 @@ hdmi_con: endpoint {
};
};
hdmi-connector {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_connector: endpoint {
remote-endpoint = <&hdmi_to_connector>;
};
};
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -283,6 +294,26 @@ usb-mux-hog {
};
};
&hdmi_tx {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hdmi>;
status = "okay";
ports {
port@1 {
reg = <1>;
hdmi_to_connector:endpoint {
remote-endpoint = <&hdmi_connector>;
};
};
};
};
&hdmi_tx_phy {
status = "okay";
};
&i2c2 {
clock-frequency = <384000>;
pinctrl-names = "default";
@@ -345,6 +376,10 @@ pcieclk: clock-generator@68 {
};
};
&hdmi_pvi {
status = "okay";
};
&i2c3 {
/* Connected to USB Hub */
usb-typec@52 {
@@ -465,6 +500,10 @@ &lcdif1 {
status = "okay";
};
&lcdif3 {
status = "okay";
};
&micfil {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pdm>;
@@ -648,6 +687,15 @@ MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19 0x140
>;
};
pinctrl_hdmi: hdmigrp {
fsl,pins = <
MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL 0x400001c2
MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA 0x400001c2
MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD 0x40000010
MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC 0x40000010
>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c2