dt-bindings: i2c: convert davinci i2c to dt-schema

Convert the Texas Instruments DaVinci and Keystone I2C controller
bindings from legacy text format to modern dt-schema (YAML).

During the conversion, the `interrupts` property was made required
to match the strict requirement in the driver probe function. The
custom `ti,has-pfunc` and `power-domains` properties were also
properly defined to match SoC-specific hardware features.

Signed-off-by: Chaitanya Sabnis <chaitanya.msabnis@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260513123758.4955-1-chaitanya.msabnis@gmail.com

Documentation/devicetree/bindings/i2c/i2c-davinci.txt

@@ -1,43 +0,0 @@
-* Texas Instruments Davinci/Keystone I2C
-
-This file provides information, what the device node for the
-davinci/keystone i2c interface contains.
-
-Required properties:
-- compatible: "ti,davinci-i2c" or "ti,keystone-i2c";
-- reg : Offset and length of the register set for the device
-- clocks: I2C functional clock phandle.
-	  For 66AK2G this property should be set per binding,
-	  Documentation/devicetree/bindings/clock/ti,sci-clk.yaml
-
-SoC-specific Required Properties:
-
-The following are mandatory properties for Keystone 2 66AK2G SoCs only:
-
-- power-domains:	Should contain a phandle to a PM domain provider node
-			and an args specifier containing the I2C device id
-			value. This property is as per the binding,
-			Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml
-
-Recommended properties :
-- interrupts : standard interrupt property.
-- clock-frequency : desired I2C bus clock frequency in Hz.
-- ti,has-pfunc: boolean; if defined, it indicates that SoC supports PFUNC
-	registers. PFUNC registers allow to switch I2C pins to function as
-	GPIOs, so they can be toggled manually.
-
-Example (enbw_cmc board):
-	i2c@1c22000 {
-		compatible = "ti,davinci-i2c";
-		reg = <0x22000 0x1000>;
-		clock-frequency = <100000>;
-		interrupts = <15>;
-		interrupt-parent = <&intc>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		dtt@48 {
-			compatible = "national,lm75";
-			reg = <0x48>;
-		};
-	};

Documentation/devicetree/bindings/i2c/ti,davinci-i2c.yaml

@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/ti,davinci-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments DaVinci/Keystone I2C
+
+maintainers:
+  - Chaitanya Sabnis <chaitanya.msabnis@gmail.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,keystone-i2c
+    then:
+      required:
+        - power-domains
+
+properties:
+  compatible:
+    enum:
+      - ti,davinci-i2c
+      - ti,keystone-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  ti,has-pfunc:
+    description:
+      Indicates that the SoC supports PFUNC registers, allowing I2C pins 
+      to function as GPIOs for manual toggling.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c@1c22000 {
+        compatible = "ti,davinci-i2c";
+        reg = <0x01c22000 0x1000>;
+        clocks = <&i2c_clk>;
+        clock-frequency = <100000>;
+        interrupts = <15>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sensor@48 {
+            compatible = "national,lm75";
+            reg = <0x48>;
+        };
+    };

MAINTAINERS

@@ -26638,7 +26638,7 @@ M:	Bartosz Golaszewski <brgl@kernel.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux.git
-F:	Documentation/devicetree/bindings/i2c/i2c-davinci.txt
+F:	Documentation/devicetree/bindings/i2c/ti,davinci-i2c.yaml
 F:	arch/arm/boot/dts/ti/davinci/
 F:	arch/arm/mach-davinci/
 F:	drivers/i2c/busses/i2c-davinci.c