gpu: nova-core: move GSP firmware files decision to GSP HAL

The files to give the `ModInfoBuilder` depend on the chipset; this is
HAL information, so move it there. Doing so lets us remove the
`uses_fsp` and `needs_fwsec_bootloader` ad-hoc methods of `Chipset`.

Signed-off-by: Eliot Courtney <ecourtney@nvidia.com>
Link: https://patch.msgid.link/20260709-nova-bootcontext-v6-9-520cbf8b9b50@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>

drivers/gpu/nova-core/firmware.rs

@@ -21,6 +21,7 @@
         FalconFirmware, //
     },
     gpu,
+    gsp::boot_firmware_files,
     num::{
         FromSafeCast,
         IntoSafeCast, //
@@ -419,24 +420,20 @@ const fn make_entry_file(self, chipset: &str, fw: &str) -> Self {
     const fn make_entry_chipset(self, chipset: gpu::Chipset) -> Self {
         let name = chipset.name();
 
-        let this = self
+        // GSP firmware files are always present.
+        let mut this = self
             .make_entry_file(name, "bootloader")
             .make_entry_file(name, "gsp");
 
-        // FSP-based chipsets (Hopper, Blackwell and later) boot the GSP via the FMC image loaded by
-        // FSP. Older chipsets use the SEC2 booter instead.
-        let this = if chipset.uses_fsp() {
-            this.make_entry_file(name, "fmc")
-        } else {
-            this.make_entry_file(name, "booter_load")
-                .make_entry_file(name, "booter_unload")
-        };
-
-        if chipset.needs_fwsec_bootloader() {
-            this.make_entry_file(name, "gen_bootloader")
-        } else {
-            this
+        // Add the firmware files specific to the GSP boot method of `chipset`.
+        let boot_files = boot_firmware_files(chipset);
+        let mut i = 0;
+        while i < boot_files.len() {
+            this = this.make_entry_file(name, boot_files[i]);
+            i += 1;
         }
+
+        this
     }
 
     pub(crate) const fn create(

drivers/gpu/nova-core/firmware/fwsec.rs

@@ -385,9 +385,8 @@ pub(crate) fn new(
 
     /// Loads the FWSEC firmware into `falcon` and execute it.
     ///
-    /// This must only be called on chipsets that do not need the FWSEC bootloader (i.e., where
-    /// [`Chipset::needs_fwsec_bootloader()`](crate::gpu::Chipset::needs_fwsec_bootloader) returns
-    /// `false`). On chipsets that do, use [`bootloader::FwsecFirmwareWithBl`] instead.
+    /// This must only be called on chipsets that do not need the FWSEC bootloader. On chipsets
+    /// where the bootloader is required, use [`bootloader::FwsecFirmwareWithBl`] instead.
     pub(crate) fn run(&self, dev: &Device<device::Bound>, falcon: &Falcon<'_, Gsp>) -> Result<()> {
         // Reset falcon, load the firmware, and run it.
         falcon

drivers/gpu/nova-core/gpu.rs

@@ -133,22 +133,6 @@ pub(crate) const fn arch(self) -> Architecture {
         }
     }
 
-    /// Returns `true` if this chipset requires the PIO-loaded bootloader in order to boot FWSEC.
-    ///
-    /// This includes all chipsets < GA102.
-    pub(crate) const fn needs_fwsec_bootloader(self) -> bool {
-        matches!(self.arch(), Architecture::Turing) || matches!(self, Self::GA100)
-    }
-
-    /// Returns `true` if this chipset boots via FSP (Hopper and later), which requires the FMC
-    /// firmware image.
-    pub(crate) const fn uses_fsp(self) -> bool {
-        matches!(
-            self.arch(),
-            Architecture::Hopper | Architecture::BlackwellGB10x | Architecture::BlackwellGB20x
-        )
-    }
-
     /// Returns the address range of the PCI config mirror space.
     pub(crate) fn pci_config_mirror_range(self) -> Range<u32> {
         hal::gpu_hal(self).pci_config_mirror_range()

drivers/gpu/nova-core/gsp.rs

@@ -32,6 +32,7 @@
     GspFwWprMeta,
     LibosParams, //
 };
+pub(crate) use hal::boot_firmware_files;
 
 use crate::{
     driver::Bar0,

drivers/gpu/nova-core/gsp/hal.rs

@@ -57,6 +57,25 @@ fn post_boot(&self, _gsp: &Gsp, _ctx: &GspBootContext<'_>, _gsp_fw: &GspFirmware
     }
 }
 
+/// Returns the names of the firmware files required to boot the GSP of `chipset`, in addition to
+/// the "bootloader" and "gsp" images required by all chipsets.
+pub(crate) const fn boot_firmware_files(chipset: Chipset) -> &'static [&'static str] {
+    match chipset.arch() {
+        // Turing chipsets boot the GSP via the SEC2 Booter, and require the FWSEC bootloader.
+        Architecture::Turing => &["booter_load", "booter_unload", "gen_bootloader"],
+        // GA100 also requires the FWSEC bootloader.
+        Architecture::Ampere if matches!(chipset, Chipset::GA100) => {
+            &["booter_load", "booter_unload", "gen_bootloader"]
+        }
+        // Other Ampere chipsets, as well as Ada chipsets, run FWSEC directly.
+        Architecture::Ampere | Architecture::Ada => &["booter_load", "booter_unload"],
+        // Hopper and later chipsets boot the GSP via the FMC image loaded by FSP.
+        Architecture::Hopper | Architecture::BlackwellGB10x | Architecture::BlackwellGB20x => {
+            &["fmc"]
+        }
+    }
+}
+
 /// Returns the GSP HAL to be used for `chipset`.
 pub(super) fn gsp_hal(chipset: Chipset) -> &'static dyn GspHal {
     match chipset.arch() {