mirrors/linux
2
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git synced 2026-05-15 19:01:45 -04:00
Code Issues Packages Projects Releases Wiki Activity

arm64: dts: imx8mp-verdin-dev: Do not include dahlia dtsi

Browse Source 
Follow the change that has been done on imx8mm-verdin-dev.dtsi and
remove the include from dahlia to be consistent. Put back all nodes that
previously had been included.

Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This commit is contained in:
Philippe Schenker
2023-01-18 11:52:51 +01:00
committed by Shawn Guo
parent 99d7ad9640
commit 64a59c39e9
1 changed files with 114 additions and 2 deletions
Download Patch File Download Diff File Expand all files Collapse all files

116
arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi
View File

@@ -3,8 +3,6 @@
* Copyright 2022 Toradex
*/
#include "imx8mp-verdin-dahlia.dtsi"
/ {
/* TODO: Audio Codec */
@@ -21,16 +19,99 @@ reg_eth2phy: regulator-eth2phy {
};
};
&backlight {
power-supply = <&reg_3p3v>;
};
/* Verdin SPI_1 */
&ecspi1 {
status = "okay";
};
/* EEPROM on display adapter boards */
&eeprom_display_adapter {
status = "okay";
};
/* EEPROM on Verdin Development board */
&eeprom_carrier_board {
status = "okay";
};
&eqos {
status = "okay";
};
&fec {
phy-supply = <&reg_eth2phy>;
status = "okay";
};
&flexcan1 {
status = "okay";
};
&flexcan2 {
status = "okay";
};
/* Verdin QSPI_1 */
&flexspi {
status = "okay";
};
&gpio_expander_21 {
status = "okay";
vcc-supply = <&reg_1p8v>;
};
/* Current measurement into module VCC */
&hwmon {
status = "okay";
};
&hwmon_temp {
vs-supply = <&reg_1p8v>;
status = "okay";
};
/* Verdin I2C_2_DSI */
&i2c2 {
status = "okay";
};
&i2c3 {
status = "okay";
};
/* Verdin I2C_1 */
&i2c4 {
status = "okay";
/* TODO: Audio Codec */
};
/* TODO: Verdin PCIE_1 */
/* Verdin PWM_1 */
&pwm1 {
status = "okay";
};
/* Verdin PWM_2 */
&pwm2 {
status = "okay";
};
/* Verdin PWM_3_DSI */
&pwm3 {
status = "okay";
};
&reg_usdhc2_vmmc {
vin-supply = <&reg_3p3v>;
};
/* TODO: Verdin I2C_1 with Audio Codec */
/* Verdin UART_1, connector X50 through RS485 transceiver */
@@ -38,9 +119,40 @@ &uart1 {
linux,rs485-enabled-at-boot-time;
rs485-rts-active-low;
rs485-rx-during-tx;
status = "okay";
};
/* Verdin UART_2 */
&uart2 {
status = "okay";
};
/* Verdin UART_3, used as the Linux Console */
&uart3 {
status = "okay";
};
/* Verdin USB_1 */
&usb3_0 {
status = "okay";
};
&usb3_phy0 {
status = "okay";
};
/* Verdin USB_2 */
&usb3_1 {
fsl,permanently-attached;
status = "okay";
};
&usb3_phy1 {
status = "okay";
};
/* Limit frequency on dev board due to long traces and bad signal integrity */
&usdhc2 {
max-frequency = <100000000>;
status = "okay";
};