Merge tag 'devicetree-fixes-for-5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull devicetree fixes from Rob Herring:

 - Another batch of removing unneeded type references in schemas

 - Fix some out of date filename references

 - Convert renesas,drif schema to use DT graph schema

* tag 'devicetree-fixes-for-5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: More removals of type references on common properties
  dt-bindings: media: renesas,drif: Use graph schema
  leds: Fix reference file name of documentation
  dt-bindings: phy: cadence-torrent: update reference file of docs

Documentation/devicetree/bindings/clock/idt,versaclock5.yaml

@@ -60,7 +60,6 @@ properties:
     maxItems: 2
 
   idt,xtal-load-femtofarads:
-    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 9000
     maximum: 22760
     description: Optional load capacitor for XTAL1 and XTAL2
@@ -84,7 +83,6 @@ patternProperties:
         enum: [ 1800000, 2500000, 3300000 ]
       idt,slew-percent:
         description: The Slew rate control for CMOS single-ended.
-        $ref: /schemas/types.yaml#/definitions/uint32
         enum: [ 80, 85, 90, 100 ]
 
 required:

Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml

@@ -102,7 +102,6 @@ patternProperties:
 
       st,adc-channel-names:
         description: List of single-ended channel names.
-        $ref: /schemas/types.yaml#/definitions/string-array
 
       st,filter-order:
         description: |

Documentation/devicetree/bindings/input/input.yaml

@@ -38,6 +38,5 @@ properties:
       Duration in seconds which the key should be kept pressed for device to
       reset automatically. Device with key pressed reset feature can specify
       this property.
-    $ref: /schemas/types.yaml#/definitions/uint32
 
 additionalProperties: true

Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml

@@ -92,7 +92,6 @@ properties:
       this interconnect to send RPMh commands.
 
   qcom,bcm-voter-names:
-    $ref: /schemas/types.yaml#/definitions/string-array
     description: |
       Names for each of the qcom,bcm-voters specified.
 

Documentation/devicetree/bindings/leds/leds-bcm6328.txt

@@ -4,8 +4,8 @@ This controller is present on BCM6318, BCM6328, BCM6362 and BCM63268.
 In these SoCs it's possible to control LEDs both as GPIOs or by hardware.
 However, on some devices there are Serial LEDs (LEDs connected to a 74x164
 controller), which can either be controlled by software (exporting the 74x164
-as spi-gpio. See Documentation/devicetree/bindings/gpio/gpio-74x164.txt), or
-by hardware using this driver.
+as spi-gpio. See Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml),
+or by hardware using this driver.
 Some of these Serial LEDs are hardware controlled (e.g. ethernet LEDs) and
 exporting the 74x164 as spi-gpio prevents those LEDs to be hardware
 controlled, so the only chance to keep them working is by using this driver.

Documentation/devicetree/bindings/leds/leds-bcm6358.txt

@@ -3,7 +3,7 @@ LEDs connected to Broadcom BCM6358 controller
 This controller is present on BCM6358 and BCM6368.
 In these SoCs there are Serial LEDs (LEDs connected to a 74x164 controller),
 which can either be controlled by software (exporting the 74x164 as spi-gpio.
-See Documentation/devicetree/bindings/gpio/gpio-74x164.txt), or
+See Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml), or
 by hardware using this driver.
 
 Required properties:

Documentation/devicetree/bindings/media/renesas,drif.yaml

@@ -99,32 +99,26 @@ properties:
       Indicates that the channel acts as primary among the bonded channels.
 
   port:
-    type: object
+    $ref: /schemas/graph.yaml#/properties/port
+    unevaluatedProperties: false
     description:
-      Child port node corresponding to the data input, in accordance with the
-      video interface bindings defined in
-      Documentation/devicetree/bindings/media/video-interfaces.txt.
-      The port node must contain at least one endpoint.
+      Child port node corresponding to the data input. The port node must
+      contain at least one endpoint.
 
     properties:
       endpoint:
-        type: object
+        $ref: /schemas/graph.yaml#/$defs/endpoint-base
+        unevaluatedProperties: false
 
         properties:
-          remote-endpoint:
-            description:
-              A phandle to the remote tuner endpoint subnode in remote node
-              port.
-
           sync-active:
+            $ref: /schemas/types.yaml#/definitions/uint32
             enum: [0, 1]
             description:
               Indicates sync signal polarity, 0/1 for low/high respectively.
               This property maps to SYNCAC bit in the hardware manual. The
               default is 1 (active high).
 
-        additionalProperties: false
-
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/net/qcom,ipa.yaml

@@ -105,7 +105,6 @@ properties:
       - description: Whether the IPA clock is enabled (if valid)
 
   qcom,smem-state-names:
-    $ref: /schemas/types.yaml#/definitions/string-array
     description: The names of the state bits used for SMP2P output
     items:
       - const: ipa-clock-enabled-valid

Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml

@@ -118,7 +118,7 @@ patternProperties:
         description:
           Specifies the Spread Spectrum Clocking mode used. It can be NO_SSC,
           EXTERNAL_SSC or INTERNAL_SSC.
-          Refer include/dt-bindings/phy/phy-cadence-torrent.h for the constants to be used.
+          Refer include/dt-bindings/phy/phy-cadence.h for the constants to be used.
         $ref: /schemas/types.yaml#/definitions/uint32
         enum: [0, 1, 2]
         default: 0

Documentation/devicetree/bindings/power/supply/sc2731-charger.yaml

@@ -20,7 +20,7 @@ properties:
     maxItems: 1
 
   phys:
-    $ref: /schemas/types.yaml#/definitions/phandle
+    maxItems: 1
     description: phandle to the USB phy
 
   monitored-battery:

Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml

@@ -49,7 +49,7 @@ properties:
     maxItems: 1
 
   memory-region:
-    $ref: /schemas/types.yaml#/definitions/phandle
+    maxItems: 1
     description:
       phandle to a node describing reserved memory (System RAM memory)
       The M core can't access all the DDR memory space on some platform,