arm64: dts: renesas: r8a779h0: Remove #address- and #size-cells from AVB[0-2]

When describing the PHYs connected to AVB1 and AVB2, mdio nodes will be
needed to describe the connections, and each mdio node will need to
contain these two properties instead.  This will make the #address-cells
and #size-cells described in the base SoC include file redundant and
they will produce warnings, remove them.

In an effort to keep all three AVB nodes style consistent add an mdio
node to AVB0 already described and rename the phy node to better
describe the PHY that is connected to AVB0 before adding more PHYs.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250107160127.528933-2-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
This commit is contained in:
Niklas Söderlund
2025-01-07 17:01:26 +01:00
committed by Geert Uytterhoeven
parent c193f87777
commit 51786c8b47
2 changed files with 13 additions and 14 deletions

View File

@@ -200,17 +200,22 @@ &audio_clkin {
&avb0 {
pinctrl-0 = <&avb0_pins>;
pinctrl-names = "default";
phy-handle = <&phy0>;
phy-handle = <&avb0_phy>;
tx-internal-delay-ps = <2000>;
status = "okay";
phy0: ethernet-phy@0 {
compatible = "ethernet-phy-id0022.1622",
"ethernet-phy-ieee802.3-c22";
rxc-skew-ps = <1500>;
reg = <0>;
interrupts-extended = <&gpio7 5 IRQ_TYPE_LEVEL_LOW>;
reset-gpios = <&gpio7 10 GPIO_ACTIVE_LOW>;
mdio {
#address-cells = <1>;
#size-cells = <0>;
avb0_phy: ethernet-phy@0 {
compatible = "ethernet-phy-id0022.1622",
"ethernet-phy-ieee802.3-c22";
rxc-skew-ps = <1500>;
reg = <0>;
interrupts-extended = <&gpio7 5 IRQ_TYPE_LEVEL_LOW>;
reset-gpios = <&gpio7 10 GPIO_ACTIVE_LOW>;
};
};
};

View File

@@ -793,8 +793,6 @@ avb0: ethernet@e6800000 {
rx-internal-delay-ps = <0>;
tx-internal-delay-ps = <0>;
iommus = <&ipmmu_hc 0>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
@@ -842,8 +840,6 @@ avb1: ethernet@e6810000 {
rx-internal-delay-ps = <0>;
tx-internal-delay-ps = <0>;
iommus = <&ipmmu_hc 1>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
@@ -891,8 +887,6 @@ avb2: ethernet@e6820000 {
rx-internal-delay-ps = <0>;
tx-internal-delay-ps = <0>;
iommus = <&ipmmu_hc 2>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};