Merge branch 'fixes' into for-next

Merge fixes into for-next to avoid int3472 and thinkpad_acpi conflicts
with upcoming changes.

drivers/platform/x86/ideapad-laptop.c

@@ -1121,7 +1121,7 @@ static int ideapad_dytc_profile_init(struct ideapad_private *priv)
 
 	/* Create platform_profile structure and register */
 	priv->dytc->ppdev = devm_platform_profile_register(&priv->platform_device->dev,
-							   "ideapad-laptop", &priv->dytc,
+							   "ideapad-laptop", priv->dytc,
 							   &dytc_profile_ops);
 	if (IS_ERR(priv->dytc->ppdev)) {
 		err = PTR_ERR(priv->dytc->ppdev);

drivers/platform/x86/intel/ifs/ifs.h

@@ -23,12 +23,14 @@
  * IFS Image
  * ---------
  *
- * Intel provides a firmware file containing the scan tests via
- * github [#f1]_.  Similar to microcode there is a separate file for each
+ * Intel provides firmware files containing the scan tests via the webpage [#f1]_.
+ * Look under "In-Field Scan Test Images Download" section towards the
+ * end of the page. Similar to microcode, there are separate files for each
  * family-model-stepping. IFS Images are not applicable for some test types.
  * Wherever applicable the sysfs directory would provide a "current_batch" file
  * (see below) for loading the image.
  *
+ * .. [#f1] https://intel.com/InFieldScan
  *
  * IFS Image Loading
  * -----------------
@@ -125,9 +127,6 @@
  * 2) Hardware allows for some number of cores to be tested in parallel.
  * The driver does not make use of this, it only tests one core at a time.
  *
- * .. [#f1] https://github.com/intel/TBD
- *
- *
  * Structural Based Functional Test at Field (SBAF):
  * -------------------------------------------------
  *

drivers/platform/x86/intel/int3472/discrete.c

@@ -2,6 +2,7 @@
 /* Author: Dan Scally <djrscally@gmail.com> */
 
 #include <linux/acpi.h>
+#include <linux/array_size.h>
 #include <linux/bitfield.h>
 #include <linux/device.h>
 #include <linux/gpio/consumer.h>
@@ -55,7 +56,7 @@ static void skl_int3472_log_sensor_module_name(struct int3472_discrete_device *i
 
 static int skl_int3472_fill_gpiod_lookup(struct gpiod_lookup *table_entry,
 					 struct acpi_resource_gpio *agpio,
-					 const char *func, u32 polarity)
+					 const char *func, unsigned long gpio_flags)
 {
 	char *path = agpio->resource_source.string_ptr;
 	struct acpi_device *adev;
@@ -70,14 +71,14 @@ static int skl_int3472_fill_gpiod_lookup(struct gpiod_lookup *table_entry,
 	if (!adev)
 		return -ENODEV;
 
-	*table_entry = GPIO_LOOKUP(acpi_dev_name(adev), agpio->pin_table[0], func, polarity);
+	*table_entry = GPIO_LOOKUP(acpi_dev_name(adev), agpio->pin_table[0], func, gpio_flags);
 
 	return 0;
 }
 
 static int skl_int3472_map_gpio_to_sensor(struct int3472_discrete_device *int3472,
 					  struct acpi_resource_gpio *agpio,
-					  const char *func, u32 polarity)
+					  const char *func, unsigned long gpio_flags)
 {
 	int ret;
 
@@ -87,7 +88,7 @@ static int skl_int3472_map_gpio_to_sensor(struct int3472_discrete_device *int347
 	}
 
 	ret = skl_int3472_fill_gpiod_lookup(&int3472->gpios.table[int3472->n_sensor_gpios],
-					    agpio, func, polarity);
+					    agpio, func, gpio_flags);
 	if (ret)
 		return ret;
 
@@ -100,7 +101,7 @@ static int skl_int3472_map_gpio_to_sensor(struct int3472_discrete_device *int347
 static struct gpio_desc *
 skl_int3472_gpiod_get_from_temp_lookup(struct int3472_discrete_device *int3472,
 				       struct acpi_resource_gpio *agpio,
-				       const char *func, u32 polarity)
+				       const char *func, unsigned long gpio_flags)
 {
 	struct gpio_desc *desc;
 	int ret;
@@ -111,7 +112,7 @@ skl_int3472_gpiod_get_from_temp_lookup(struct int3472_discrete_device *int3472,
 		return ERR_PTR(-ENOMEM);
 
 	lookup->dev_id = dev_name(int3472->dev);
-	ret = skl_int3472_fill_gpiod_lookup(&lookup->table[0], agpio, func, polarity);
+	ret = skl_int3472_fill_gpiod_lookup(&lookup->table[0], agpio, func, gpio_flags);
 	if (ret)
 		return ERR_PTR(ret);
 
@@ -122,32 +123,76 @@ skl_int3472_gpiod_get_from_temp_lookup(struct int3472_discrete_device *int3472,
 	return desc;
 }
 
-static void int3472_get_func_and_polarity(u8 type, const char **func, u32 *polarity)
+/**
+ * struct int3472_gpio_map - Map GPIOs to whatever is expected by the
+ * sensor driver (as in DT bindings)
+ * @hid: The ACPI HID of the device without the instance number e.g. INT347E
+ * @type_from: The GPIO type from ACPI ?SDT
+ * @type_to: The assigned GPIO type, typically same as @type_from
+ * @func: The function, e.g. "enable"
+ * @polarity_low: GPIO_ACTIVE_LOW true if the @polarity_low is true,
+ * GPIO_ACTIVE_HIGH otherwise
+ */
+struct int3472_gpio_map {
+	const char *hid;
+	u8 type_from;
+	u8 type_to;
+	bool polarity_low;
+	const char *func;
+};
+
+static const struct int3472_gpio_map int3472_gpio_map[] = {
+	{ "INT347E", INT3472_GPIO_TYPE_RESET, INT3472_GPIO_TYPE_RESET, false, "enable" },
+};
+
+static void int3472_get_func_and_polarity(struct acpi_device *adev, u8 *type,
+					  const char **func, unsigned long *gpio_flags)
 {
-	switch (type) {
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(int3472_gpio_map); i++) {
+		/*
+		 * Map the firmware-provided GPIO to whatever a driver expects
+		 * (as in DT bindings). First check if the type matches with the
+		 * GPIO map, then further check that the device _HID matches.
+		 */
+		if (*type != int3472_gpio_map[i].type_from)
+			continue;
+
+		if (!acpi_dev_hid_uid_match(adev, int3472_gpio_map[i].hid, NULL))
+			continue;
+
+		*type = int3472_gpio_map[i].type_to;
+		*gpio_flags = int3472_gpio_map[i].polarity_low ?
+			      GPIO_ACTIVE_LOW : GPIO_ACTIVE_HIGH;
+		*func = int3472_gpio_map[i].func;
+		return;
+	}
+
+	switch (*type) {
 	case INT3472_GPIO_TYPE_RESET:
 		*func = "reset";
-		*polarity = GPIO_ACTIVE_LOW;
+		*gpio_flags = GPIO_ACTIVE_LOW;
 		break;
 	case INT3472_GPIO_TYPE_POWERDOWN:
 		*func = "powerdown";
-		*polarity = GPIO_ACTIVE_LOW;
+		*gpio_flags = GPIO_ACTIVE_LOW;
 		break;
 	case INT3472_GPIO_TYPE_CLK_ENABLE:
 		*func = "clk-enable";
-		*polarity = GPIO_ACTIVE_HIGH;
+		*gpio_flags = GPIO_ACTIVE_HIGH;
 		break;
 	case INT3472_GPIO_TYPE_PRIVACY_LED:
 		*func = "privacy-led";
-		*polarity = GPIO_ACTIVE_HIGH;
+		*gpio_flags = GPIO_ACTIVE_HIGH;
 		break;
 	case INT3472_GPIO_TYPE_POWER_ENABLE:
 		*func = "power-enable";
-		*polarity = GPIO_ACTIVE_HIGH;
+		*gpio_flags = GPIO_ACTIVE_HIGH;
 		break;
 	default:
 		*func = "unknown";
-		*polarity = GPIO_ACTIVE_HIGH;
+		*gpio_flags = GPIO_ACTIVE_HIGH;
 		break;
 	}
 }
@@ -194,7 +239,7 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares,
 	struct gpio_desc *gpio;
 	const char *err_msg;
 	const char *func;
-	u32 polarity;
+	unsigned long gpio_flags;
 	int ret;
 
 	if (!acpi_gpio_get_io_resource(ares, &agpio))
@@ -217,7 +262,7 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares,
 
 	type = FIELD_GET(INT3472_GPIO_DSM_TYPE, obj->integer.value);
 
-	int3472_get_func_and_polarity(type, &func, &polarity);
+	int3472_get_func_and_polarity(int3472->sensor, &type, &func, &gpio_flags);
 
 	pin = FIELD_GET(INT3472_GPIO_DSM_PIN, obj->integer.value);
 	/* Pin field is not really used under Windows and wraps around at 8 bits */
@@ -227,16 +272,16 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares,
 
 	active_value = FIELD_GET(INT3472_GPIO_DSM_SENSOR_ON_VAL, obj->integer.value);
 	if (!active_value)
-		polarity ^= GPIO_ACTIVE_LOW;
+		gpio_flags ^= GPIO_ACTIVE_LOW;
 
 	dev_dbg(int3472->dev, "%s %s pin %d active-%s\n", func,
 		agpio->resource_source.string_ptr, agpio->pin_table[0],
-		str_high_low(polarity == GPIO_ACTIVE_HIGH));
+		str_high_low(gpio_flags == GPIO_ACTIVE_HIGH));
 
 	switch (type) {
 	case INT3472_GPIO_TYPE_RESET:
 	case INT3472_GPIO_TYPE_POWERDOWN:
-		ret = skl_int3472_map_gpio_to_sensor(int3472, agpio, func, polarity);
+		ret = skl_int3472_map_gpio_to_sensor(int3472, agpio, func, gpio_flags);
 		if (ret)
 			err_msg = "Failed to map GPIO pin to sensor\n";
 
@@ -244,7 +289,7 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares,
 	case INT3472_GPIO_TYPE_CLK_ENABLE:
 	case INT3472_GPIO_TYPE_PRIVACY_LED:
 	case INT3472_GPIO_TYPE_POWER_ENABLE:
-		gpio = skl_int3472_gpiod_get_from_temp_lookup(int3472, agpio, func, polarity);
+		gpio = skl_int3472_gpiod_get_from_temp_lookup(int3472, agpio, func, gpio_flags);
 		if (IS_ERR(gpio)) {
 			ret = PTR_ERR(gpio);
 			err_msg = "Failed to get GPIO\n";

drivers/platform/x86/intel/pmc/core.c

@@ -626,8 +626,8 @@ static u32 convert_ltr_scale(u32 val)
 static int pmc_core_ltr_show(struct seq_file *s, void *unused)
 {
 	struct pmc_dev *pmcdev = s->private;
-	u64 decoded_snoop_ltr, decoded_non_snoop_ltr;
-	u32 ltr_raw_data, scale, val;
+	u64 decoded_snoop_ltr, decoded_non_snoop_ltr, val;
+	u32 ltr_raw_data, scale;
 	u16 snoop_ltr, nonsnoop_ltr;
 	unsigned int i, index, ltr_index = 0;
 

drivers/platform/x86/thinkpad_acpi.c

@@ -7884,6 +7884,7 @@ static struct ibm_struct volume_driver_data = {
 
 #define FAN_NS_CTRL_STATUS	BIT(2)		/* Bit which determines control is enabled or not */
 #define FAN_NS_CTRL		BIT(4)		/* Bit which determines control is by host or EC */
+#define FAN_CLOCK_TPM		(22500*60)	/* Ticks per minute for a 22.5 kHz clock */
 
 enum {					/* Fan control constants */
 	fan_status_offset = 0x2f,	/* EC register 0x2f */
@@ -7939,6 +7940,7 @@ static int fan_watchdog_maxinterval;
 
 static bool fan_with_ns_addr;
 static bool ecfw_with_fan_dec_rpm;
+static bool fan_speed_in_tpr;
 
 static struct mutex fan_mutex;
 
@@ -8141,8 +8143,11 @@ static int fan_get_speed(unsigned int *speed)
 			     !acpi_ec_read(fan_rpm_offset + 1, &hi)))
 			return -EIO;
 
-		if (likely(speed))
+		if (likely(speed)) {
 			*speed = (hi << 8) | lo;
+			if (fan_speed_in_tpr && *speed != 0)
+				*speed = FAN_CLOCK_TPM / *speed;
+		}
 		break;
 	case TPACPI_FAN_RD_TPEC_NS:
 		if (!acpi_ec_read(fan_rpm_status_ns, &lo))
@@ -8175,8 +8180,11 @@ static int fan2_get_speed(unsigned int *speed)
 		if (rc)
 			return -EIO;
 
-		if (likely(speed))
+		if (likely(speed)) {
 			*speed = (hi << 8) | lo;
+			if (fan_speed_in_tpr && *speed != 0)
+				*speed = FAN_CLOCK_TPM / *speed;
+		}
 		break;
 
 	case TPACPI_FAN_RD_TPEC_NS:
@@ -8787,6 +8795,7 @@ static const struct attribute_group fan_driver_attr_group = {
 #define TPACPI_FAN_NOFAN	0x0008		/* no fan available */
 #define TPACPI_FAN_NS		0x0010		/* For EC with non-Standard register addresses */
 #define TPACPI_FAN_DECRPM	0x0020		/* For ECFW's with RPM in register as decimal */
+#define TPACPI_FAN_TPR		0x0040		/* Fan speed is in Ticks Per Revolution */
 
 static const struct tpacpi_quirk fan_quirk_table[] __initconst = {
 	TPACPI_QEC_IBM('1', 'Y', TPACPI_FAN_Q1),
@@ -8816,6 +8825,7 @@ static const struct tpacpi_quirk fan_quirk_table[] __initconst = {
 	TPACPI_Q_LNV3('R', '0', 'V', TPACPI_FAN_NS),	/* 11e Gen5 KL-Y */
 	TPACPI_Q_LNV3('N', '1', 'O', TPACPI_FAN_NOFAN),	/* X1 Tablet (2nd gen) */
 	TPACPI_Q_LNV3('R', '0', 'Q', TPACPI_FAN_DECRPM),/* L480 */
+	TPACPI_Q_LNV('8', 'F', TPACPI_FAN_TPR),		/* ThinkPad x120e */
 };
 
 static int __init fan_init(struct ibm_init_struct *iibm)
@@ -8886,6 +8896,8 @@ static int __init fan_init(struct ibm_init_struct *iibm)
 
 			if (quirks & TPACPI_FAN_Q1)
 				fan_quirk1_setup();
+			if (quirks & TPACPI_FAN_TPR)
+				fan_speed_in_tpr = true;
 			/* Try and probe the 2nd fan */
 			tp_features.second_fan = 1; /* needed for get_speed to work */
 			res = fan2_get_speed(&speed);
@@ -10318,6 +10330,10 @@ static struct ibm_struct proxsensor_driver_data = {
 #define DYTC_MODE_PSC_BALANCE  5  /* Default mode aka balanced */
 #define DYTC_MODE_PSC_PERFORM  7  /* High power mode aka performance */
 
+#define DYTC_MODE_PSCV9_LOWPOWER 1  /* Low power mode */
+#define DYTC_MODE_PSCV9_BALANCE  3  /* Default mode aka balanced */
+#define DYTC_MODE_PSCV9_PERFORM  4  /* High power mode aka performance */
+
 #define DYTC_ERR_MASK       0xF  /* Bits 0-3 in cmd result are the error result */
 #define DYTC_ERR_SUCCESS      1  /* CMD completed successful */
 
@@ -10338,6 +10354,10 @@ static int dytc_capabilities;
 static bool dytc_mmc_get_available;
 static int profile_force;
 
+static int platform_psc_profile_lowpower = DYTC_MODE_PSC_LOWPOWER;
+static int platform_psc_profile_balanced = DYTC_MODE_PSC_BALANCE;
+static int platform_psc_profile_performance = DYTC_MODE_PSC_PERFORM;
+
 static int convert_dytc_to_profile(int funcmode, int dytcmode,
 		enum platform_profile_option *profile)
 {
@@ -10359,19 +10379,15 @@ static int convert_dytc_to_profile(int funcmode, int dytcmode,
 		}
 		return 0;
 	case DYTC_FUNCTION_PSC:
-		switch (dytcmode) {
-		case DYTC_MODE_PSC_LOWPOWER:
+		if (dytcmode == platform_psc_profile_lowpower)
 			*profile = PLATFORM_PROFILE_LOW_POWER;
-			break;
-		case DYTC_MODE_PSC_BALANCE:
+		else if (dytcmode == platform_psc_profile_balanced)
 			*profile =  PLATFORM_PROFILE_BALANCED;
-			break;
-		case DYTC_MODE_PSC_PERFORM:
+		else if (dytcmode == platform_psc_profile_performance)
 			*profile =  PLATFORM_PROFILE_PERFORMANCE;
-			break;
-		default: /* Unknown mode */
+		else
 			return -EINVAL;
-		}
+
 		return 0;
 	case DYTC_FUNCTION_AMT:
 		/* For now return balanced. It's the closest we have to 'auto' */
@@ -10392,19 +10408,19 @@ static int convert_profile_to_dytc(enum platform_profile_option profile, int *pe
 		if (dytc_capabilities & BIT(DYTC_FC_MMC))
 			*perfmode = DYTC_MODE_MMC_LOWPOWER;
 		else if (dytc_capabilities & BIT(DYTC_FC_PSC))
-			*perfmode = DYTC_MODE_PSC_LOWPOWER;
+			*perfmode = platform_psc_profile_lowpower;
 		break;
 	case PLATFORM_PROFILE_BALANCED:
 		if (dytc_capabilities & BIT(DYTC_FC_MMC))
 			*perfmode = DYTC_MODE_MMC_BALANCE;
 		else if (dytc_capabilities & BIT(DYTC_FC_PSC))
-			*perfmode = DYTC_MODE_PSC_BALANCE;
+			*perfmode = platform_psc_profile_balanced;
 		break;
 	case PLATFORM_PROFILE_PERFORMANCE:
 		if (dytc_capabilities & BIT(DYTC_FC_MMC))
 			*perfmode = DYTC_MODE_MMC_PERFORM;
 		else if (dytc_capabilities & BIT(DYTC_FC_PSC))
-			*perfmode = DYTC_MODE_PSC_PERFORM;
+			*perfmode = platform_psc_profile_performance;
 		break;
 	default: /* Unknown profile */
 		return -EOPNOTSUPP;
@@ -10598,6 +10614,7 @@ static int tpacpi_dytc_profile_init(struct ibm_init_struct *iibm)
 	if (output & BIT(DYTC_QUERY_ENABLE_BIT))
 		dytc_version = (output >> DYTC_QUERY_REV_BIT) & 0xF;
 
+	dbg_printk(TPACPI_DBG_INIT, "DYTC version %d\n", dytc_version);
 	/* Check DYTC is enabled and supports mode setting */
 	if (dytc_version < 5)
 		return -ENODEV;
@@ -10636,6 +10653,11 @@ static int tpacpi_dytc_profile_init(struct ibm_init_struct *iibm)
 		}
 	} else if (dytc_capabilities & BIT(DYTC_FC_PSC)) { /* PSC MODE */
 		pr_debug("PSC is supported\n");
+		if (dytc_version >= 9) { /* update profiles for DYTC 9 and up */
+			platform_psc_profile_lowpower = DYTC_MODE_PSCV9_LOWPOWER;
+			platform_psc_profile_balanced = DYTC_MODE_PSCV9_BALANCE;
+			platform_psc_profile_performance = DYTC_MODE_PSCV9_PERFORM;
+		}
 	} else {
 		dbg_printk(TPACPI_DBG_INIT, "No DYTC support available\n");
 		return -ENODEV;
@@ -10645,8 +10667,8 @@ static int tpacpi_dytc_profile_init(struct ibm_init_struct *iibm)
 			"DYTC version %d: thermal mode available\n", dytc_version);
 
 	/* Create platform_profile structure and register */
-	tpacpi_pprof = devm_platform_profile_register(&tpacpi_pdev->dev, "thinkpad-acpi",
-						      NULL, &dytc_profile_ops);
+	tpacpi_pprof = platform_profile_register(&tpacpi_pdev->dev, "thinkpad-acpi-profile",
+						 NULL, &dytc_profile_ops);
 	/*
 	 * If for some reason platform_profiles aren't enabled
 	 * don't quit terminally.
@@ -10664,8 +10686,15 @@ static int tpacpi_dytc_profile_init(struct ibm_init_struct *iibm)
 	return 0;
 }
 
+static void dytc_profile_exit(void)
+{
+	if (!IS_ERR_OR_NULL(tpacpi_pprof))
+		platform_profile_remove(tpacpi_pprof);
+}
+
 static struct ibm_struct  dytc_profile_driver_data = {
 	.name = "dytc-profile",
+	.exit = dytc_profile_exit,
 };
 
 /*************************************************************************