dma/swiotlb: introduce Kconfig option for compile-time default pool size

The SWIOTLB bounce buffer pool size is hardcoded at 64 MB via
IO_TLB_DEFAULT_SIZE with no compile-time knob to adjust it. On
memory-constrained embedded or mobile platforms equipped with a
hardware IOMMU (e.g., ARM SMMU) covering most DMA-capable devices,
reserving 64 MB at boot is unnecessarily wasteful — the SWIOTLB is
only exercised for devices that bypass the IOMMU or have restricted
DMA address ranges.

Introduce CONFIG_SWIOTLB_DEFAULT_SIZE_MB, an integer Kconfig option
(range 1–64 MB, default 64) that allows platforms to set a smaller
compile-time default. IO_TLB_DEFAULT_SIZE is updated to derive from
this value when CONFIG_SWIOTLB is enabled, preserving the existing
64 MB default when the option is not configured.

The runtime "swiotlb=<nslabs>" kernel parameter override remains
fully supported and takes precedence over the compile-time default.

Signed-off-by: Jagadeesh Pagadala <jpagadal@qti.qualcomm.com>
Signed-off-by: Bibek Kumar Patro <bibek.patro@oss.qualcomm.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/20260702-swiotlb-v2-1-9205f3ba5408@oss.qualcomm.com
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>

Documentation/core-api/swiotlb.rst

@@ -140,8 +140,11 @@ Data structures concepts
 ------------------------
 Memory used for swiotlb bounce buffers is allocated from overall system memory
 as one or more "pools". The default pool is allocated during system boot with a
-default size of 64 MiB. The default pool size may be modified with the
-"swiotlb=" kernel boot line parameter. The default size may also be adjusted
+default size of 64 MiB, which can be changed at compile time via
+CONFIG_SWIOTLB_DEFAULT_SIZE_MB. The default pool size may also be
+modified at runtime with the "swiotlb=" kernel boot line parameter,
+which takes precedence over the compile-time default. The default size
+may also be adjusted
 due to other conditions, such as running in a CoCo VM, as described above. If
 CONFIG_SWIOTLB_DYNAMIC is enabled, additional pools may be allocated later in
 the life of the system. Each pool must be a contiguous range of physical

include/linux/swiotlb.h

@@ -32,8 +32,12 @@ struct scatterlist;
 #define IO_TLB_SHIFT 11
 #define IO_TLB_SIZE (1 << IO_TLB_SHIFT)
 
-/* default to 64MB */
-#define IO_TLB_DEFAULT_SIZE (64UL<<20)
+/* compile-time default; overridable via CONFIG_SWIOTLB_DEFAULT_SIZE_MB */
+#ifdef CONFIG_SWIOTLB
+#define IO_TLB_DEFAULT_SIZE ((unsigned long)CONFIG_SWIOTLB_DEFAULT_SIZE_MB << 20)
+#else
+#define IO_TLB_DEFAULT_SIZE (64UL << 20)
+#endif
 
 unsigned long swiotlb_size_or_default(void);
 void __init swiotlb_init_remap(bool addressing_limit, unsigned int flags,

kernel/dma/Kconfig

@@ -86,6 +86,28 @@ config SWIOTLB
 	bool
 	select NEED_DMA_MAP_STATE
 
+config SWIOTLB_DEFAULT_SIZE_MB
+	int "Default SWIOTLB bounce buffer size in MB"
+	depends on SWIOTLB
+	range 1 64
+	default 64
+	help
+	  Sets the default size of the software IO TLB (SWIOTLB) bounce buffer
+	  pool allocated at boot time. The default is 64 MB.
+
+	  On memory-constrained embedded or mobile platforms (e.g., those with
+	  a hardware IOMMU such as ARM SMMU covering most DMA-capable devices),
+	  a smaller value such as 4 or 8 MB may be sufficient. The SWIOTLB is
+	  then only needed for devices that bypass the IOMMU or have restricted
+	  DMA address ranges.
+
+	  The minimum allowed value is 1 MB. This compile-time default can be
+	  overridden at runtime using the "swiotlb=<nslabs>" kernel command line
+	  parameter. Refer to Documentation/admin-guide/kernel-parameters.txt
+	  for details.
+
+	  If unsure, leave at the default value of 64.
+
 config SWIOTLB_DYNAMIC
 	bool "Dynamic allocation of DMA bounce buffers"
 	default n