nvme-tcp: do not accept C2HData based on blk_rq_payload_bytes() alone

Commit 25e5cb780e ("nvme-tcp: fix possible crash in write_zeroes
processing") established that blk_rq_payload_bytes() must not be read
without first checking blk_rq_nr_phys_segments(), and recorded the
result in nvme_tcp_setup_cmd_pdu() as req->data_len. The receive side
was left as it was.

The two differ for REQ_OP_WRITE_ZEROES, which has no physical segments
but a non-zero blk_rq_bytes(), so setup leaves req->iter untouched
while the receive gate lets a C2HData through and nvme_tcp_recv_data()
copies into whatever the previous command on that tag left there. The
driver-private area is zeroed only when the tag set is allocated.

Reproduced with a test target that leaves a residual iterator on a tag
and then sends a C2HData for a WRITE_ZEROES command on the same tag:

BUG: KASAN: wild-memory-access in _copy_to_iter+0x642/0x1330
Write of size 512 at addr ffe728c2175dfa81 by task kworker/0:1H/103

CPU: 0 UID: 0 PID: 103 Comm: kworker/0:1H Not tainted 7.2.0-rc5-NVMETCP-gf5098b6bae76 #1 PREEMPT(lazy)
Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Workqueue: nvme_tcp_wq nvme_tcp_io_work
Call Trace:
 <TASK>
 dump_stack_lvl+0x53/0x70
 kasan_report+0xce/0x100
 ? _copy_to_iter+0x642/0x1330
 kasan_check_range+0x105/0x1b0
 __asan_memcpy+0x3c/0x60
 _copy_to_iter+0x642/0x1330
 ? __pfx_sock_has_perm+0x10/0x10
 ? worker_thread+0x45b/0xd10
 ? __pfx__copy_to_iter+0x10/0x10
 ? _raw_spin_lock_bh+0x83/0xe0
 ? __pfx__raw_spin_lock_bh+0x10/0x10
 __skb_datagram_iter+0xf3/0x820
 ? __pfx_simple_copy_to_iter+0x10/0x10
 ? __asan_memcpy+0x3c/0x60
 ? skb_copy_bits+0x58d/0x830
 skb_copy_datagram_iter+0x37/0x120
 nvme_tcp_recv_skb+0xa07/0x4320
 ? __pfx_nvme_tcp_recv_skb+0x10/0x10
 __tcp_read_sock+0x1ab/0x810
 ? __pfx_nvme_tcp_recv_skb+0x10/0x10
 ? __pfx_lock_sock_nested+0x10/0x10
 ? __pfx___tcp_read_sock+0x10/0x10
 nvme_tcp_try_recv+0x152/0x1e0
 ? __pfx_nvme_tcp_try_recv+0x10/0x10
 ? __pfx_mutex_unlock+0x10/0x10
 nvme_tcp_io_work+0x1e4/0x6c0
 ? __schedule+0x181a/0x49f0
 ? __pfx_nvme_tcp_io_work+0x10/0x10
 process_one_work+0x633/0x1030

Keep the blk_rq_payload_bytes() test and add req->data_len to it. The
old test is what rejects a C2HData naming a tag that is no longer in
flight, because blk_update_request() zeroes rq->__data_len on
completion; req->data_len and req->curr_bio are driver-private and
survive completion, so they cannot stand in for it. Setup initialises
the iterator only when both req->curr_bio and req->data_len are set, so
the gate now tests the same two.

Fixes: 25e5cb780e ("nvme-tcp: fix possible crash in write_zeroes processing")
Cc: stable@vger.kernel.org
Signed-off-by: Yehyeong Lee <yhlee@isslab.korea.ac.kr>
Signed-off-by: Keith Busch <kbusch@kernel.org>

drivers/nvme/host/tcp.c

@@ -673,6 +673,7 @@ static int nvme_tcp_process_nvme_cqe(struct nvme_tcp_queue *queue,
 static int nvme_tcp_handle_c2h_data(struct nvme_tcp_queue *queue,
 		struct nvme_tcp_data_pdu *pdu)
 {
+	struct nvme_tcp_request *req;
 	struct request *rq;
 
 	rq = nvme_find_rq(nvme_tcp_tagset(queue), pdu->command_id);
@@ -683,7 +684,8 @@ static int nvme_tcp_handle_c2h_data(struct nvme_tcp_queue *queue,
 		return -ENOENT;
 	}
 
-	if (!blk_rq_payload_bytes(rq)) {
+	req = blk_mq_rq_to_pdu(rq);
+	if (!blk_rq_payload_bytes(rq) || !req->curr_bio || !req->data_len) {
 		dev_err(queue->ctrl->ctrl.device,
 			"queue %d tag %#x unexpected data\n",
 			nvme_tcp_queue_id(queue), rq->tag);