Merge tag 'tags/spi-octal-dtr' into nand/next

spi: Octal DTR support This series adds support for 8D-8D-8D in SPI NAND, which can already be leveraged without any SPI changes as controllers already have this support for some SPI NOR devices. Among the few spi-mem patches, they are needed for building the SPI NAND changes (especially the ODTR introduction at the end) and therefore an immutable tag will be needed for merging in the MTD tree (unless all the series goes through MTD directly ofc).
2026-05-20 19:06:39 -04:00 · 2026-01-29 20:19:44 +01:00
parent 5ec64aa7fe 8618271887
commit 1ebbefb73c
1131 changed files with 9070 additions and 5184 deletions
--- a/.clang-format
+++ b/.clang-format
@@ -748,6 +748,7 @@ ForEachMacros:
  - 'ynl_attr_for_each_nested'
  - 'ynl_attr_for_each_payload'
  - 'zorro_for_each_dev'
+  - 'zpci_bus_for_each'

 IncludeBlocks: Preserve
 IncludeCategories:
--- a/.mailmap
+++ b/.mailmap
@@ -127,7 +127,8 @@ Barry Song <baohua@kernel.org> <Baohua.Song@csr.com>
 Barry Song <baohua@kernel.org> <barry.song@analog.com>
 Bart Van Assche <bvanassche@acm.org> <bart.vanassche@sandisk.com>
 Bart Van Assche <bvanassche@acm.org> <bart.vanassche@wdc.com>
-Bartosz Golaszewski <brgl@bgdev.pl> <bgolaszewski@baylibre.com>
+Bartosz Golaszewski <brgl@kernel.org> <bartosz.golaszewski@linaro.org>
+Bartosz Golaszewski <brgl@kernel.org> <bgolaszewski@baylibre.com>
 Ben Dooks <ben-linux@fluff.org> <ben.dooks@simtec.co.uk>
 Ben Dooks <ben-linux@fluff.org> <ben.dooks@sifive.com>
 Ben Gardner <bgardner@wabtec.com>
@@ -415,6 +416,7 @@ Juha Yrjola <at solidboot.com>
 Juha Yrjola <juha.yrjola@nokia.com>
 Juha Yrjola <juha.yrjola@solidboot.com>
 Julien Thierry <julien.thierry.kdev@gmail.com> <julien.thierry@arm.com>
+Justin Iurman <justin.iurman@gmail.com> <justin.iurman@uliege.be>
 Iskren Chernev <me@iskren.info> <iskren.chernev@gmail.com>
 Kalle Valo <kvalo@kernel.org> <kvalo@codeaurora.org>
 Kalle Valo <kvalo@kernel.org> <quic_kvalo@quicinc.com>
@@ -471,6 +473,10 @@ Linas Vepstas <linas@austin.ibm.com>
 Linus Lüssing <linus.luessing@c0d3.blue> <linus.luessing@ascom.ch>
 Linus Lüssing <linus.luessing@c0d3.blue> <linus.luessing@web.de>
 Linus Lüssing <linus.luessing@c0d3.blue> <ll@simonwunderlich.de>
+Linus Walleij <linusw@kernel.org> <linus.walleij@ericsson.com>
+Linus Walleij <linusw@kernel.org> <linus.walleij@stericsson.com>
+Linus Walleij <linusw@kernel.org> <linus.walleij@linaro.org>
+Linus Walleij <linusw@kernel.org> <triad@df.lth.se>
 <linux-hardening@vger.kernel.org> <kernel-hardening@lists.openwall.com>
 Li Yang <leoyang.li@nxp.com> <leoli@freescale.com>
 Li Yang <leoyang.li@nxp.com> <leo@zh-kernel.org>
@@ -704,6 +710,8 @@ Sankeerth Billakanti <quic_sbillaka@quicinc.com> <sbillaka@codeaurora.org>
 Santosh Shilimkar <santosh.shilimkar@oracle.org>
 Santosh Shilimkar <ssantosh@kernel.org>
 Sarangdhar Joshi <spjoshi@codeaurora.org>
+Saravana Kannan <saravanak@kernel.org> <skannan@codeaurora.org>
+Saravana Kannan <saravanak@kernel.org> <saravanak@google.com>
 Sascha Hauer <s.hauer@pengutronix.de>
 Sahitya Tummala <quic_stummala@quicinc.com> <stummala@codeaurora.org>
 Sathishkumar Muruganandam <quic_murugana@quicinc.com> <murugana@codeaurora.org>
@@ -793,6 +801,7 @@ Tanzir Hasan <tanzhasanwork@gmail.com> <tanzirh@google.com>
 Tejun Heo <htejun@gmail.com>
 Tomeu Vizoso <tomeu@tomeuvizoso.net> <tomeu.vizoso@collabora.com>
 Thomas Graf <tgraf@suug.ch>
+Thomas Gleixner <tglx@kernel.org> <tglx@linutronix.de>
 Thomas Körper <socketcan@esd.eu> <thomas.koerper@esd.eu>
 Thomas Pedersen <twp@codeaurora.org>
 Thorsten Blum <thorsten.blum@linux.dev> <thorsten.blum@toblux.com>
@@ -857,7 +866,6 @@ Vladimir Davydov <vdavydov.dev@gmail.com> <vdavydov@parallels.com>
 Vladimir Davydov <vdavydov.dev@gmail.com> <vdavydov@virtuozzo.com>
 WangYuli <wangyuli@aosc.io> <wangyl5933@chinaunicom.cn>
 WangYuli <wangyuli@aosc.io> <wangyuli@deepin.org>
-WangYuli <wangyuli@aosc.io> <wangyuli@uniontech.com>
 Weiwen Hu <huweiwen@linux.alibaba.com> <sehuww@mail.scut.edu.cn>
 WeiXiong Liao <gmpy.liaowx@gmail.com> <liaoweixiong@allwinnertech.com>
 Wen Gong <quic_wgong@quicinc.com> <wgong@codeaurora.org>
--- a/3
+++ b/3
@@ -1398,7 +1398,7 @@ D: SRM environment driver (for Alpha systems)
 P: 1024D/8399E1BB 250D 3BCF 7127 0D8C A444  A961 1DBD 5E75 8399 E1BB

 N: Thomas Gleixner
-E: tglx@linutronix.de
+E: tglx@kernel.org
 D: NAND flash hardware support, JFFS2 on NAND flash

 N: Jérôme Glisse
@@ -1987,6 +1987,7 @@ D: netfilter: TCP window tracking code
 D: netfilter: raw table
 D: netfilter: iprange match
 D: netfilter: new logging interfaces
+D: netfilter: ipset
 D: netfilter: various other hacks
 S: Tata
 S: Hungary
--- a/Documentation/ABI/stable/sysfs-kernel-time-aux-clocks
+++ b/Documentation/ABI/stable/sysfs-kernel-time-aux-clocks
@@ -1,5 +1,5 @@
 What:		/sys/kernel/time/aux_clocks/<ID>/enable
 Date:		May 2025
-Contact:	Thomas Gleixner <tglx@linutronix.de>
+Contact:	Thomas Gleixner <tglx@kernel.org>
 Description:
 		Controls the enablement of auxiliary clock timekeepers.
--- a/Documentation/ABI/testing/sysfs-devices-soc
+++ b/Documentation/ABI/testing/sysfs-devices-soc
@@ -17,14 +17,14 @@ Date:		January 2012
 contact:	Lee Jones <lee@kernel.org>
 Description:
 		Read-only attribute common to all SoCs. Contains the SoC machine
-		name (e.g. Ux500).
+		name (e.g. DB8500).

 What:		/sys/devices/socX/family
 Date:		January 2012
 contact:	Lee Jones <lee@kernel.org>
 Description:
 		Read-only attribute common to all SoCs. Contains SoC family name
-		(e.g. DB8500).
+		(e.g. ux500).

 		On many of ARM based silicon with SMCCC v1.2+ compliant firmware
 		this will contain the JEDEC JEP106 manufacturer’s identification
--- a/Documentation/admin-guide/blockdev/zoned_loop.rst
+++ b/Documentation/admin-guide/blockdev/zoned_loop.rst
@@ -134,7 +134,7 @@ MB and a zone capacity of 63 MB::

        $ modprobe zloop
        $ mkdir -p /var/local/zloop/0
-        $ echo "add capacity_mb=2048,zone_size_mb=64,zone_capacity=63MB" > /dev/zloop-control
+        $ echo "add capacity_mb=2048,zone_size_mb=64,zone_capacity_mb=63" > /dev/zloop-control

 For the device created (/dev/zloop0), the zone backing files are all created
 under the default base directory (/var/local/zloop)::
--- a/Documentation/arch/riscv/hwprobe.rst
+++ b/Documentation/arch/riscv/hwprobe.rst
@@ -281,6 +281,14 @@ The following keys are defined:
  * :c:macro:`RISCV_HWPROBE_EXT_ZICBOP`: The Zicbop extension is supported, as
       ratified in commit 3dd606f ("Create cmobase-v1.0.pdf") of riscv-CMOs.

+  * :c:macro:`RISCV_HWPROBE_EXT_ZILSD`: The Zilsd extension is supported as
+       defined in the RISC-V ISA manual starting from commit f88abf1 ("Integrating
+       load/store pair for RV32 with the main manual") of the riscv-isa-manual.
+
+  * :c:macro:`RISCV_HWPROBE_EXT_ZCLSD`: The Zclsd extension is supported as
+       defined in the RISC-V ISA manual starting from commit f88abf1 ("Integrating
+       load/store pair for RV32 with the main manual") of the riscv-isa-manual.
+
 * :c:macro:`RISCV_HWPROBE_KEY_CPUPERF_0`: Deprecated.  Returns similar values to
     :c:macro:`RISCV_HWPROBE_KEY_MISALIGNED_SCALAR_PERF`, but the key was
     mistakenly classified as a bitmask rather than a value.
--- a/Documentation/arch/x86/boot.rst
+++ b/Documentation/arch/x86/boot.rst
@@ -95,26 +95,26 @@ Memory Layout
 The traditional memory map for the kernel loader, used for Image or
 zImage kernels, typically looks like::

-  		|  			 |
+		|  			 |
  0A0000	+------------------------+
-  		|  Reserved for BIOS	 |	Do not use.  Reserved for BIOS EBDA.
+		|  Reserved for BIOS	 |	Do not use.  Reserved for BIOS EBDA.
  09A000	+------------------------+
-  		|  Command line		 |
-  		|  Stack/heap		 |	For use by the kernel real-mode code.
+		|  Command line		 |
+		|  Stack/heap		 |	For use by the kernel real-mode code.
  098000	+------------------------+
-  		|  Kernel setup		 |	The kernel real-mode code.
+		|  Kernel setup		 |	The kernel real-mode code.
  090200	+------------------------+
-  		|  Kernel boot sector	 |	The kernel legacy boot sector.
+		|  Kernel boot sector	 |	The kernel legacy boot sector.
  090000	+------------------------+
-  		|  Protected-mode kernel |	The bulk of the kernel image.
+		|  Protected-mode kernel |	The bulk of the kernel image.
  010000	+------------------------+
-  		|  Boot loader		 |	<- Boot sector entry point 0000:7C00
+		|  Boot loader		 |	<- Boot sector entry point 0000:7C00
  001000	+------------------------+
-  		|  Reserved for MBR/BIOS |
+		|  Reserved for MBR/BIOS |
  000800	+------------------------+
-  		|  Typically used by MBR |
+		|  Typically used by MBR |
  000600	+------------------------+
-  		|  BIOS use only	 |
+		|  BIOS use only	 |
  000000	+------------------------+

 When using bzImage, the protected-mode kernel was relocated to
@@ -142,27 +142,27 @@ above the 0x9A000 point; too many BIOSes will break above that point.
 For a modern bzImage kernel with boot protocol version >= 2.02, a
 memory layout like the following is suggested::

-  		~  			 ~
-  		|  Protected-mode kernel |
+		~  			 ~
+		|  Protected-mode kernel |
  100000	+------------------------+
-  		|  I/O memory hole	 |
+		|  I/O memory hole	 |
  0A0000	+------------------------+
-  		|  Reserved for BIOS	 |	Leave as much as possible unused
-  		~  			 ~
-  		|  Command line		 |	(Can also be below the X+10000 mark)
+		|  Reserved for BIOS	 |	Leave as much as possible unused
+		~  			 ~
+		|  Command line		 |	(Can also be below the X+10000 mark)
  X+10000	+------------------------+
-  		|  Stack/heap		 |	For use by the kernel real-mode code.
+		|  Stack/heap		 |	For use by the kernel real-mode code.
  X+08000	+------------------------+
-  		|  Kernel setup		 |	The kernel real-mode code.
-  		|  Kernel boot sector	 |	The kernel legacy boot sector.
+		|  Kernel setup		 |	The kernel real-mode code.
+		|  Kernel boot sector	 |	The kernel legacy boot sector.
  X		+------------------------+
-  		|  Boot loader		 |	<- Boot sector entry point 0000:7C00
+		|  Boot loader		 |	<- Boot sector entry point 0000:7C00
  001000	+------------------------+
-  		|  Reserved for MBR/BIOS |
+		|  Reserved for MBR/BIOS |
  000800	+------------------------+
-  		|  Typically used by MBR |
+		|  Typically used by MBR |
  000600	+------------------------+
-  		|  BIOS use only	 |
+		|  BIOS use only	 |
  000000	+------------------------+

  ... where the address X is as low as the design of the boot loader permits.
@@ -433,7 +433,7 @@ Protocol:	2.00+

  Assigned boot loader IDs:

-	== =======================================
+	==== =======================================
 	0x0  LILO
 	     (0x00 reserved for pre-2.00 bootloader)
 	0x1  Loadlin
@@ -456,7 +456,7 @@ Protocol:	2.00+
 	     <http://sebastian-plotz.blogspot.de>
 	0x12 OVMF UEFI virtualization stack
 	0x13 barebox
-	== =======================================
+	==== =======================================

  Please contact <hpa@zytor.com> if you need a bootloader ID value assigned.

@@ -809,12 +809,12 @@ Protocol:	2.09+
  as follow::

   struct setup_data {
-   	__u64 next;
-   	__u32 type;
-   	__u32 len;
-   	__u8 data[];
+	__u64 next;
+	__u32 type;
+	__u32 len;
+	__u8 data[];
   }
-   
+
  Where, the next is a 64-bit physical pointer to the next node of
  linked list, the next field of the last node is 0; the type is used
  to identify the contents of data; the len is the length of data
@@ -835,10 +835,10 @@ Protocol:	2.09+
  protocol 2.15::

   struct setup_indirect {
-   	__u32 type;
-   	__u32 reserved;		/* Reserved, must be set to zero. */
-   	__u64 len;
-   	__u64 addr;
+	__u32 type;
+	__u32 reserved;		/* Reserved, must be set to zero. */
+	__u64 len;
+	__u64 addr;
   };

  The type member is a SETUP_INDIRECT | SETUP_* type. However, it cannot be
@@ -850,15 +850,15 @@ Protocol:	2.09+
  In this case setup_data and setup_indirect will look like this::

   struct setup_data {
-   	.next = 0,	/* or <addr_of_next_setup_data_struct> */
-   	.type = SETUP_INDIRECT,
-   	.len = sizeof(setup_indirect),
-   	.data[sizeof(setup_indirect)] = (struct setup_indirect) {
-   		.type = SETUP_INDIRECT | SETUP_E820_EXT,
-   		.reserved = 0,
-   		.len = <len_of_SETUP_E820_EXT_data>,
-   		.addr = <addr_of_SETUP_E820_EXT_data>,
-   	},
+	.next = 0,	/* or <addr_of_next_setup_data_struct> */
+	.type = SETUP_INDIRECT,
+	.len = sizeof(setup_indirect),
+	.data[sizeof(setup_indirect)] = (struct setup_indirect) {
+		.type = SETUP_INDIRECT | SETUP_E820_EXT,
+		.reserved = 0,
+		.len = <len_of_SETUP_E820_EXT_data>,
+		.addr = <addr_of_SETUP_E820_EXT_data>,
+	},
   }

 .. note::
@@ -897,11 +897,11 @@ Offset/size:	0x260/4
  The kernel runtime start address is determined by the following algorithm::

   if (relocatable_kernel) {
-    	if (load_address < pref_address)
-    		load_address = pref_address;
-    	runtime_start = align_up(load_address, kernel_alignment);
+	if (load_address < pref_address)
+		load_address = pref_address;
+	runtime_start = align_up(load_address, kernel_alignment);
   } else {
-    	runtime_start = pref_address;
+	runtime_start = pref_address;
   }

 Hence the necessary memory window location and size can be estimated by
@@ -975,22 +975,22 @@ after kernel_info_var_len_data label. Each chunk of variable size data has to
 be prefixed with header/magic and its size, e.g.::

  kernel_info:
-  	.ascii  "LToP"		/* Header, Linux top (structure). */
-  	.long   kernel_info_var_len_data - kernel_info
-  	.long   kernel_info_end - kernel_info
-  	.long   0x01234567	/* Some fixed size data for the bootloaders. */
+	.ascii  "LToP"		/* Header, Linux top (structure). */
+	.long   kernel_info_var_len_data - kernel_info
+	.long   kernel_info_end - kernel_info
+	.long   0x01234567	/* Some fixed size data for the bootloaders. */
  kernel_info_var_len_data:
  example_struct:		/* Some variable size data for the bootloaders. */
-  	.ascii  "0123"		/* Header/Magic. */
-  	.long   example_struct_end - example_struct
-  	.ascii  "Struct"
-  	.long   0x89012345
+	.ascii  "0123"		/* Header/Magic. */
+	.long   example_struct_end - example_struct
+	.ascii  "Struct"
+	.long   0x89012345
  example_struct_end:
  example_strings:		/* Some variable size data for the bootloaders. */
-  	.ascii  "ABCD"		/* Header/Magic. */
-  	.long   example_strings_end - example_strings
-  	.asciz  "String_0"
-  	.asciz  "String_1"
+	.ascii  "ABCD"		/* Header/Magic. */
+	.long   example_strings_end - example_strings
+	.asciz  "String_0"
+	.asciz  "String_1"
  example_strings_end:
  kernel_info_end:

@@ -1132,53 +1132,53 @@ Such a boot loader should enter the following fields in the header::
  unsigned long base_ptr;	/* base address for real-mode segment */

  if (setup_sects == 0)
-  	setup_sects = 4;
+	setup_sects = 4;

  if (protocol >= 0x0200) {
-  	type_of_loader = <type code>;
-  	if (loading_initrd) {
-  		ramdisk_image = <initrd_address>;
-  		ramdisk_size = <initrd_size>;
-  	}
+	type_of_loader = <type code>;
+	if (loading_initrd) {
+		ramdisk_image = <initrd_address>;
+		ramdisk_size = <initrd_size>;
+	}

-  	if (protocol >= 0x0202 && loadflags & 0x01)
-  		heap_end = 0xe000;
-  	else
-  		heap_end = 0x9800;
+	if (protocol >= 0x0202 && loadflags & 0x01)
+		heap_end = 0xe000;
+	else
+		heap_end = 0x9800;

-  	if (protocol >= 0x0201) {
-  		heap_end_ptr = heap_end - 0x200;
-  		loadflags |= 0x80;		/* CAN_USE_HEAP */
-  	}
+	if (protocol >= 0x0201) {
+		heap_end_ptr = heap_end - 0x200;
+		loadflags |= 0x80;		/* CAN_USE_HEAP */
+	}

-  	if (protocol >= 0x0202) {
-  		cmd_line_ptr = base_ptr + heap_end;
-  		strcpy(cmd_line_ptr, cmdline);
-  	} else {
-  		cmd_line_magic	= 0xA33F;
-  		cmd_line_offset = heap_end;
-  		setup_move_size = heap_end + strlen(cmdline) + 1;
-  		strcpy(base_ptr + cmd_line_offset, cmdline);
-  	}
+	if (protocol >= 0x0202) {
+		cmd_line_ptr = base_ptr + heap_end;
+		strcpy(cmd_line_ptr, cmdline);
+	} else {
+		cmd_line_magic	= 0xA33F;
+		cmd_line_offset = heap_end;
+		setup_move_size = heap_end + strlen(cmdline) + 1;
+		strcpy(base_ptr + cmd_line_offset, cmdline);
+	}
  } else {
-  	/* Very old kernel */
+	/* Very old kernel */

-  	heap_end = 0x9800;
+	heap_end = 0x9800;

-  	cmd_line_magic	= 0xA33F;
-  	cmd_line_offset = heap_end;
+	cmd_line_magic	= 0xA33F;
+	cmd_line_offset = heap_end;

-  	/* A very old kernel MUST have its real-mode code loaded at 0x90000 */
-  	if (base_ptr != 0x90000) {
-  		/* Copy the real-mode kernel */
-  		memcpy(0x90000, base_ptr, (setup_sects + 1) * 512);
-  		base_ptr = 0x90000;		 /* Relocated */
-  	}
+	/* A very old kernel MUST have its real-mode code loaded at 0x90000 */
+	if (base_ptr != 0x90000) {
+		/* Copy the real-mode kernel */
+		memcpy(0x90000, base_ptr, (setup_sects + 1) * 512);
+		base_ptr = 0x90000;		 /* Relocated */
+	}

-  	strcpy(0x90000 + cmd_line_offset, cmdline);
+	strcpy(0x90000 + cmd_line_offset, cmdline);

-  	/* It is recommended to clear memory up to the 32K mark */
-  	memset(0x90000 + (setup_sects + 1) * 512, 0, (64 - (setup_sects + 1)) * 512);
+	/* It is recommended to clear memory up to the 32K mark */
+	memset(0x90000 + (setup_sects + 1) * 512, 0, (64 - (setup_sects + 1)) * 512);
  }


--- a/Documentation/arch/x86/topology.rst
+++ b/Documentation/arch/x86/topology.rst
@@ -17,7 +17,7 @@ with the generic one and look at this one in parallel for the x86 specifics.
 Needless to say, code should use the generic functions - this file is *only*
 here to *document* the inner workings of x86 topology.

-Started by Thomas Gleixner <tglx@linutronix.de> and Borislav Petkov <bp@alien8.de>.
+Started by Thomas Gleixner <tglx@kernel.org> and Borislav Petkov <bp@alien8.de>.

 The main aim of the topology facilities is to present adequate interfaces to
 code which needs to know/query/use the structure of the running system wrt
--- a/Documentation/core-api/cpu_hotplug.rst
+++ b/Documentation/core-api/cpu_hotplug.rst
@@ -8,7 +8,7 @@ CPU hotplug in the Kernel
         Srivatsa Vaddagiri <vatsa@in.ibm.com>,
         Ashok Raj <ashok.raj@intel.com>,
         Joel Schopp <jschopp@austin.ibm.com>,
-	 Thomas Gleixner <tglx@linutronix.de>
+	 Thomas Gleixner <tglx@kernel.org>

 Introduction
 ============
--- a/Documentation/core-api/genericirq.rst
+++ b/Documentation/core-api/genericirq.rst
@@ -439,6 +439,6 @@ Credits

 The following people have contributed to this document:

-1. Thomas Gleixner tglx@linutronix.de
+1. Thomas Gleixner tglx@kernel.org

 2. Ingo Molnar mingo@elte.hu
--- a/Documentation/core-api/librs.rst
+++ b/Documentation/core-api/librs.rst
@@ -209,4 +209,4 @@ testing. Thanks a lot.

 The following people have contributed to this document:

-Thomas Gleixner\ tglx@linutronix.de
+Thomas Gleixner\ tglx@kernel.org
--- a/Documentation/devicetree/bindings/arm/arm,integrator.yaml
+++ b/Documentation/devicetree/bindings/arm/arm,integrator.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: ARM Integrator Boards

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 description: |+
  These were the first ARM platforms officially supported by ARM Ltd.
--- a/Documentation/devicetree/bindings/arm/arm,realview.yaml
+++ b/Documentation/devicetree/bindings/arm/arm,realview.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: ARM RealView Boards

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 description: |+
  The ARM RealView series of reference designs were built to explore the Arm11,
--- a/Documentation/devicetree/bindings/arm/arm,scu.yaml
+++ b/Documentation/devicetree/bindings/arm/arm,scu.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: ARM Snoop Control Unit (SCU)

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 description: |
  As part of the MPCore complex, Cortex-A5 and Cortex-A9 are provided
--- a/Documentation/devicetree/bindings/arm/arm,versatile-sysreg.yaml
+++ b/Documentation/devicetree/bindings/arm/arm,versatile-sysreg.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Arm Versatile system registers

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 description:
  This is a system control registers block, providing multiple low level
--- a/Documentation/devicetree/bindings/arm/arm,versatile.yaml
+++ b/Documentation/devicetree/bindings/arm/arm,versatile.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: ARM Versatile Boards

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 description: |+
  The ARM Versatile boards are two variants of ARM926EJ-S evaluation boards
--- a/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml
+++ b/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml
@@ -8,7 +8,7 @@ title: ARM Versatile Express and Juno Boards

 maintainers:
  - Sudeep Holla <sudeep.holla@arm.com>
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 description: |+
  ARM's Versatile Express platform were built as reference designs for exploring
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -1105,7 +1105,6 @@ properties:
              - gateworks,imx8mp-gw74xx   # i.MX8MP Gateworks Board
              - gateworks,imx8mp-gw75xx-2x # i.MX8MP Gateworks Board
              - gateworks,imx8mp-gw82xx-2x # i.MX8MP Gateworks Board
-              - gocontroll,moduline-display # GOcontroll Moduline Display controller
              - prt,prt8ml             # Protonic PRT8ML
              - skov,imx8mp-skov-basic # SKOV i.MX8MP baseboard without frontplate
              - skov,imx8mp-skov-revb-hdmi # SKOV i.MX8MP climate control without panel
@@ -1164,6 +1163,14 @@ properties:
          - const: engicam,icore-mx8mp             # i.MX8MP Engicam i.Core MX8M Plus SoM
          - const: fsl,imx8mp

+      - description: Ka-Ro TX8P-ML81 SoM based boards
+        items:
+          - enum:
+              - gocontroll,moduline-display
+              - gocontroll,moduline-display-106
+          - const: karo,tx8p-ml81
+          - const: fsl,imx8mp
+
      - description: Kontron i.MX8MP OSM-S SoM based Boards
        items:
          - const: kontron,imx8mp-bl-osm-s  # Kontron BL i.MX8MP OSM-S Board
--- a/Documentation/devicetree/bindings/arm/gemini.yaml
+++ b/Documentation/devicetree/bindings/arm/gemini.yaml
@@ -20,7 +20,7 @@ description: |
  Many of the IP blocks used in the SoC comes from Faraday Technology.

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 properties:
  $nodename:
--- a/Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml
+++ b/Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Intel IXP4xx

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 properties:
  $nodename:
--- a/Documentation/devicetree/bindings/arm/ux500.yaml
+++ b/Documentation/devicetree/bindings/arm/ux500.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Ux500 platforms

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 properties:
  $nodename:
--- a/Documentation/devicetree/bindings/ata/ata-generic.yaml
+++ b/Documentation/devicetree/bindings/ata/ata-generic.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Generic Parallel ATA Controller

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 description:
  Generic Parallel ATA controllers supporting PIO modes only.
--- a/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.yaml
+++ b/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Cortina Systems Gemini SATA Bridge

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 description: |
    The Gemini SATA bridge in a SoC-internal PATA to SATA bridge that
--- a/Documentation/devicetree/bindings/ata/faraday,ftide010.yaml
+++ b/Documentation/devicetree/bindings/ata/faraday,ftide010.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Faraday Technology FTIDE010 PATA controller

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 description: |
  This controller is the first Faraday IDE interface block, used in the
--- a/Documentation/devicetree/bindings/ata/intel,ixp4xx-compact-flash.yaml
+++ b/Documentation/devicetree/bindings/ata/intel,ixp4xx-compact-flash.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Intel IXP4xx CompactFlash Card Controller

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 description: |
  The IXP4xx network processors have a CompactFlash interface that presents
--- a/Documentation/devicetree/bindings/ata/pata-common.yaml
+++ b/Documentation/devicetree/bindings/ata/pata-common.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Common Properties for Parallel AT attachment (PATA) controllers

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 description: |
  This document defines device tree properties common to most Parallel
--- a/Documentation/devicetree/bindings/ata/sata-common.yaml
+++ b/Documentation/devicetree/bindings/ata/sata-common.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Common Properties for Serial AT attachment (SATA) controllers

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 description: |
  This document defines device tree properties common to most Serial
--- a/Documentation/devicetree/bindings/auxdisplay/arm,versatile-lcd.yaml
+++ b/Documentation/devicetree/bindings/auxdisplay/arm,versatile-lcd.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: ARM Versatile Character LCD

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>
  - Rob Herring <robh@kernel.org>

 description:
--- a/Documentation/devicetree/bindings/clock/sprd,sc9860-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/sprd,sc9860-clk.yaml
@@ -114,25 +114,6 @@ allOf:
        - reg
      properties:
        sprd,syscon: false
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - sprd,sc9860-agcp-gate
-              - sprd,sc9860-aon-gate
-              - sprd,sc9860-apahb-gate
-              - sprd,sc9860-apapb-gate
-              - sprd,sc9860-cam-gate
-              - sprd,sc9860-disp-gate
-              - sprd,sc9860-pll
-              - sprd,sc9860-pmu-gate
-              - sprd,sc9860-vsp-gate
-    then:
-      required:
-        - sprd,syscon
-      properties:
-        reg: false

 additionalProperties: false

@@ -142,13 +123,6 @@ examples:
      #address-cells = <2>;
      #size-cells = <2>;

-      pmu-gate {
-        compatible = "sprd,sc9860-pmu-gate";
-        clocks = <&ext_26m>;
-        #clock-cells = <1>;
-        sprd,syscon = <&pmu_regs>;
-      };
-
      clock-controller@20000000 {
        compatible = "sprd,sc9860-ap-clk";
        reg = <0 0x20000000 0 0x400>;
--- a/Documentation/devicetree/bindings/clock/stericsson,u8500-clks.yaml
+++ b/Documentation/devicetree/bindings/clock/stericsson,u8500-clks.yaml
@@ -8,7 +8,7 @@ title: ST-Ericsson DB8500 (U8500) clocks

 maintainers:
  - Ulf Hansson <ulf.hansson@linaro.org>
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 description: While named "U8500 clocks" these clocks are inside the
  DB8500 digital baseband system-on-chip and its siblings such as
--- a/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml
+++ b/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml
@@ -8,7 +8,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Intel IXP4xx cryptographic engine

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 description: |
  The Intel IXP4xx cryptographic engine makes use of the IXP4xx NPE
--- a/Documentation/devicetree/bindings/display/dsi-controller.yaml
+++ b/Documentation/devicetree/bindings/display/dsi-controller.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Common Properties for DSI Display Panels

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 description: |
  This document defines device tree properties common to DSI, Display
--- a/Documentation/devicetree/bindings/display/faraday,tve200.yaml
+++ b/Documentation/devicetree/bindings/display/faraday,tve200.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Faraday TV Encoder TVE200

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 properties:
  compatible:
--- a/Documentation/devicetree/bindings/display/panel/arm,rtsm-display.yaml
+++ b/Documentation/devicetree/bindings/display/panel/arm,rtsm-display.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Arm RTSM Virtual Platforms Display

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 allOf:
  - $ref: panel-common.yaml#
--- a/Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.yaml
+++ b/Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: ARM Versatile TFT Panels

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 description: |
  These panels are connected to the daughterboards found on the
--- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml
+++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Ilitek ILI9322 TFT panel driver with SPI control bus

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 description: |
  This is a driver for 320x240 TFT panels, accepting a variety of input
--- a/Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml
+++ b/Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Novatek NT35510-based display panels

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 allOf:
  - $ref: panel-common.yaml#
--- a/Documentation/devicetree/bindings/display/panel/samsung,lms380kf01.yaml
+++ b/Documentation/devicetree/bindings/display/panel/samsung,lms380kf01.yaml
@@ -11,7 +11,7 @@ description: The LMS380KF01 is a 480x800 DPI display panel from Samsung Mobile
  used with internal or external backlight control.

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 allOf:
  - $ref: panel-common.yaml#
--- a/Documentation/devicetree/bindings/display/panel/samsung,lms397kf04.yaml
+++ b/Documentation/devicetree/bindings/display/panel/samsung,lms397kf04.yaml
@@ -10,7 +10,7 @@ description: The datasheet claims this is based around a display controller
  named DB7430 with a separate backlight controller.

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 allOf:
  - $ref: panel-common.yaml#
--- a/Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.yaml
+++ b/Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Samsung S6D16D0 4" 864x480 AMOLED panel

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 allOf:
  - $ref: panel-common.yaml#
--- a/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml
+++ b/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml
@@ -12,7 +12,7 @@ description: The Sony ACX424AKP and ACX424AKM are panels built around
  AKP.

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 allOf:
  - $ref: panel-common.yaml#
--- a/Documentation/devicetree/bindings/display/panel/ti,nspire.yaml
+++ b/Documentation/devicetree/bindings/display/panel/ti,nspire.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Texas Instruments NSPIRE Display Panels

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 allOf:
  - $ref: panel-common.yaml#
--- a/Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml
+++ b/Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: TPO TPG110 Panel

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>
  - Thierry Reding <thierry.reding@gmail.com>

 description: |+
--- a/Documentation/devicetree/bindings/display/ste,mcde.yaml
+++ b/Documentation/devicetree/bindings/display/ste,mcde.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: ST-Ericsson Multi Channel Display Engine MCDE

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 properties:
  compatible:
--- a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
+++ b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
@@ -84,8 +84,7 @@ properties:
    maxItems: 1
    description: phandle to the associated power domain

-  dma-coherent:
-    type: boolean
+  dma-coherent: true

  ports:
    $ref: /schemas/graph.yaml#/properties/ports
--- a/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml
+++ b/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml
@@ -103,8 +103,7 @@ properties:
    maxItems: 1
    description: phandle to the associated power domain

-  dma-coherent:
-    type: boolean
+  dma-coherent: true

  ports:
    $ref: /schemas/graph.yaml#/properties/ports
--- a/Documentation/devicetree/bindings/dma/stericsson,dma40.yaml
+++ b/Documentation/devicetree/bindings/dma/stericsson,dma40.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: ST-Ericsson DMA40 DMA Engine

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 allOf:
  - $ref: dma-controller.yaml#
--- a/Documentation/devicetree/bindings/extcon/fcs,fsa880.yaml
+++ b/Documentation/devicetree/bindings/extcon/fcs,fsa880.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Fairchild Semiconductor FSA880, FSA9480 and compatibles

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 description:
  The FSA880 and FSA9480 are USB port accessory detectors and switches.
--- a/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml
+++ b/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml
@@ -8,7 +8,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Intel IXP4xx Network Processing Engine

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 description: |
  On the IXP4xx SoCs, the Network Processing Engine (NPE) is a small
--- a/Documentation/devicetree/bindings/gnss/brcm,bcm4751.yaml
+++ b/Documentation/devicetree/bindings/gnss/brcm,bcm4751.yaml
@@ -8,7 +8,7 @@ title: Broadcom BCM4751 family GNSS Receiver

 maintainers:
  - Johan Hovold <johan@kernel.org>
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 description:
  Broadcom GPS chips can be used over the UART or I2C bus. The UART
--- a/Documentation/devicetree/bindings/gpio/faraday,ftgpio010.yaml
+++ b/Documentation/devicetree/bindings/gpio/faraday,ftgpio010.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Faraday Technology FTGPIO010 GPIO Controller

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 properties:
  compatible:
--- a/Documentation/devicetree/bindings/gpio/gpio-consumer-common.yaml
+++ b/Documentation/devicetree/bindings/gpio/gpio-consumer-common.yaml
@@ -8,7 +8,7 @@ title: Common GPIO lines

 maintainers:
  - Bartosz Golaszewski <brgl@bgdev.pl>
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 description:
  Pay attention to using proper GPIO flag (e.g. GPIO_ACTIVE_LOW) for the GPIOs
--- a/Documentation/devicetree/bindings/gpio/gpio-ep9301.yaml
+++ b/Documentation/devicetree/bindings/gpio/gpio-ep9301.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: EP93xx GPIO controller

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>
  - Bartosz Golaszewski <brgl@bgdev.pl>
  - Nikita Shubin <nikita.shubin@maquefel.me>

--- a/Documentation/devicetree/bindings/gpio/gpio-mmio.yaml
+++ b/Documentation/devicetree/bindings/gpio/gpio-mmio.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Generic MMIO GPIO

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>
  - Bartosz Golaszewski <brgl@bgdev.pl>

 description:
--- a/Documentation/devicetree/bindings/gpio/intel,ixp4xx-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/intel,ixp4xx-gpio.yaml
@@ -22,7 +22,7 @@ description: |
  and this can be enabled by a special flag.

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 properties:
  compatible:
--- a/Documentation/devicetree/bindings/gpio/mrvl-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/mrvl-gpio.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Marvell PXA GPIO controller

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>
  - Bartosz Golaszewski <bgolaszewski@baylibre.com>
  - Rob Herring <robh@kernel.org>

--- a/Documentation/devicetree/bindings/gpio/pl061-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/pl061-gpio.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: ARM PL061 GPIO controller

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>
  - Rob Herring <robh@kernel.org>

 # We need a select here so we don't match all nodes with 'arm,primecell'
--- a/Documentation/devicetree/bindings/gpio/st,nomadik-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/st,nomadik-gpio.yaml
@@ -12,7 +12,7 @@ description:
  with pinctrl-nomadik.

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 properties:
  $nodename:
--- a/Documentation/devicetree/bindings/gpio/st,stmpe-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/st,stmpe-gpio.yaml
@@ -14,7 +14,7 @@ description:
  GPIO portions of these expanders.

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 properties:
  compatible:
--- a/Documentation/devicetree/bindings/gpu/img,powervr-rogue.yaml
+++ b/Documentation/devicetree/bindings/gpu/img,powervr-rogue.yaml
@@ -20,7 +20,9 @@ properties:
          - const: img,img-gx6250
          - const: img,img-rogue
      - items:
-          - const: renesas,r8a77965-gpu
+          - enum:
+              - renesas,r8a77965-gpu
+              - renesas,r8a779a0-gpu
          - const: img,img-ge7800
          - const: img,img-rogue
      - items:
--- a/Documentation/devicetree/bindings/hwmon/ntc-thermistor.yaml
+++ b/Documentation/devicetree/bindings/hwmon/ntc-thermistor.yaml
@@ -6,7 +6,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: NTC thermistor temperature sensors

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 description: |
  Thermistors with negative temperature coefficient (NTC) are resistors that
--- a/Documentation/devicetree/bindings/hwmon/winbond,w83781d.yaml
+++ b/Documentation/devicetree/bindings/hwmon/winbond,w83781d.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Winbond W83781 and compatible hardware monitor IC

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 properties:
  compatible:
--- a/Documentation/devicetree/bindings/i2c/arm,i2c-versatile.yaml
+++ b/Documentation/devicetree/bindings/i2c/arm,i2c-versatile.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: I2C Controller on ARM Ltd development platforms

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 allOf:
  - $ref: /schemas/i2c/i2c-controller.yaml#
--- a/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml
+++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml
@@ -38,6 +38,7 @@ properties:
              - qcom,sm8450-cci
              - qcom,sm8550-cci
              - qcom,sm8650-cci
+              - qcom,sm8750-cci
              - qcom,x1e80100-cci
          - const: qcom,msm8996-cci # CCI v2

@@ -132,6 +133,7 @@ allOf:
            enum:
              - qcom,kaanapali-cci
              - qcom,qcm2290-cci
+              - qcom,sm8750-cci
    then:
      properties:
        clocks:
--- a/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml
@@ -34,8 +34,15 @@ properties:
          - const: snps,designware-i2c
      - description: Baikal-T1 SoC System I2C controller
        const: baikal,bt1-sys-i2c
+      - description: Mobileye EyeQ DesignWare I2C controller
+        items:
+          - enum:
+              - mobileye,eyeq7h-i2c
+          - const: mobileye,eyeq6lplus-i2c
+          - const: snps,designware-i2c
      - items:
          - enum:
+              - mobileye,eyeq6lplus-i2c
              - mscc,ocelot-i2c
              - sophgo,sg2044-i2c
              - thead,th1520-i2c
--- a/Documentation/devicetree/bindings/i2c/st,nomadik-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/st,nomadik-i2c.yaml
@@ -12,7 +12,7 @@ description: The Nomadik I2C host controller began its life in the ST
  DB8500 after the merge of these two companies wireless divisions.

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 # Need a custom select here or 'arm,primecell' will match on lots of nodes
 select:
--- a/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Bosch BMA255 and Similar Accelerometers

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>
  - Stephan Gerhold <stephan@gerhold.net>

 description:
--- a/Documentation/devicetree/bindings/iio/adc/qcom,pm8018-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/qcom,pm8018-adc.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm's PM8xxx voltage XOADC

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 description: |
  The Qualcomm PM8xxx PMICs contain a HK/XO ADC (Housekeeping/Crystal
--- a/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.yaml
+++ b/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Invensense MPU-3050 Gyroscope

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 properties:
  compatible:
--- a/Documentation/devicetree/bindings/iio/light/capella,cm3605.yaml
+++ b/Documentation/devicetree/bindings/iio/light/capella,cm3605.yaml
@@ -8,7 +8,7 @@ title:
  Capella Microsystems CM3605 Ambient Light and Short Distance Proximity Sensor

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>
  - Kevin Tsai <ktsai@capellamicro.com>

 description: |
--- a/Documentation/devicetree/bindings/iio/light/sharp,gp2ap002.yaml
+++ b/Documentation/devicetree/bindings/iio/light/sharp,gp2ap002.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Sharp GP2AP002A00F and GP2AP002S00F proximity and ambient light sensors

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 description: |
  Proximity and ambient light sensor with IR LED for the proximity
--- a/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8974.yaml
+++ b/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8974.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Asahi Kasei AK8974 magnetometer sensor

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 properties:
  compatible:
--- a/Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas530.yaml
+++ b/Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas530.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Yamaha YAS530 family of magnetometer sensors

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 description:
  The Yamaha YAS530 magnetometers is a line of 3-axis magnetometers
--- a/Documentation/devicetree/bindings/iio/st,st-sensors.yaml
+++ b/Documentation/devicetree/bindings/iio/st,st-sensors.yaml
@@ -14,7 +14,7 @@ description: The STMicroelectronics sensor devices are pretty straight-forward

 maintainers:
  - Denis Ciocca <denis.ciocca@st.com>
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 properties:
  compatible:
--- a/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml
+++ b/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml
@@ -8,7 +8,7 @@ title: Atmel maXTouch touchscreen/touchpad

 maintainers:
  - Nick Dyer <nick@shmanahar.org>
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 description: |
  Atmel maXTouch touchscreen or touchpads such as the mXT244
--- a/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma140.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma140.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Cypress CY8CTMA140 series touchscreen controller

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 allOf:
  - $ref: touchscreen.yaml#
--- a/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma340.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma340.yaml
@@ -12,7 +12,7 @@ description: The Cypress CY8CTMA340 series (also known as "CYTTSP" after

 maintainers:
  - Javier Martinez Canillas <javier@dowhile0.org>
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 allOf:
  - $ref: touchscreen.yaml#
--- a/Documentation/devicetree/bindings/input/touchscreen/melfas,mms114.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/melfas,mms114.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Melfas MMS114 family touchscreen controller

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 allOf:
  - $ref: touchscreen.yaml#
--- a/Documentation/devicetree/bindings/input/touchscreen/zinitix,bt400.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/zinitix,bt400.yaml
@@ -12,7 +12,7 @@ description: The Zinitix BT4xx and BT5xx series of touchscreen controllers

 maintainers:
  - Michael Srba <Michael.Srba@seznam.cz>
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 allOf:
  - $ref: touchscreen.yaml#
--- a/Documentation/devicetree/bindings/interrupt-controller/arm,versatile-fpga-irq.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/arm,versatile-fpga-irq.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: ARM Versatile FPGA IRQ Controller

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 description:
  One or more FPGA IRQ controllers can be synthesized in an ARM reference board
--- a/Documentation/devicetree/bindings/interrupt-controller/faraday,ftintc010.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/faraday,ftintc010.yaml
@@ -6,7 +6,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Faraday Technology FTINTC010 interrupt controller

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 description:
  This interrupt controller is a stock IP block from Faraday Technology found
--- a/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml
@@ -8,7 +8,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Intel IXP4xx XScale Networking Processors Interrupt Controller

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 description: |
  This interrupt controller is found in the Intel IXP4xx processors.
--- a/Documentation/devicetree/bindings/leds/backlight/kinetic,ktd253.yaml
+++ b/Documentation/devicetree/bindings/leds/backlight/kinetic,ktd253.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Kinetic Technologies KTD253 and KTD259 one-wire backlight

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 description: |
  The Kinetic Technologies KTD253 and KTD259 are white LED backlights
--- a/Documentation/devicetree/bindings/leds/register-bit-led.yaml
+++ b/Documentation/devicetree/bindings/leds/register-bit-led.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Register Bit LEDs

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 description: |+
  Register bit leds are used with syscon multifunctional devices where single
--- a/Documentation/devicetree/bindings/leds/regulator-led.yaml
+++ b/Documentation/devicetree/bindings/leds/regulator-led.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Regulator LEDs

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 description: |
  Regulator LEDs are powered by a single regulator such that they can
--- a/Documentation/devicetree/bindings/leds/richtek,rt8515.yaml
+++ b/Documentation/devicetree/bindings/leds/richtek,rt8515.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Richtek RT8515 1.5A dual channel LED driver

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 description: |
  The Richtek RT8515 is a dual channel (two mode) LED driver that
--- a/Documentation/devicetree/bindings/memory-controllers/intel,ixp4xx-expansion-bus-controller.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/intel,ixp4xx-expansion-bus-controller.yaml
@@ -12,7 +12,7 @@ description: |
  including IXP42x, IXP43x, IXP45x and IXP46x.

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 properties:
  $nodename:
--- a/Documentation/devicetree/bindings/memory-controllers/intel,ixp4xx-expansion-peripheral-props.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/intel,ixp4xx-expansion-peripheral-props.yaml
@@ -12,7 +12,7 @@ description:
  including IXP42x, IXP43x, IXP45x and IXP46x.

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 properties:
  intel,ixp4xx-eb-t1:
--- a/Documentation/devicetree/bindings/mfd/arm,dev-platforms-syscon.yaml
+++ b/Documentation/devicetree/bindings/mfd/arm,dev-platforms-syscon.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Arm Ltd Developer Platforms System Controllers

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 description:
  The Arm Ltd Integrator, Realview, and Versatile families of developer
--- a/Documentation/devicetree/bindings/mfd/st,stmpe.yaml
+++ b/Documentation/devicetree/bindings/mfd/st,stmpe.yaml
@@ -12,7 +12,7 @@ description: STMicroelectronics Port Expander (STMPE) is a series of slow
  peripherals connected to SPI or I2C.

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 allOf:
  - $ref: /schemas/spi/spi-peripheral-props.yaml#
--- a/Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml
+++ b/Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: ST-Ericsson Analog Baseband AB8500 and AB8505

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 description:
  the AB8500 "Analog Baseband" is the mixed-signals integrated circuit
--- a/Documentation/devicetree/bindings/mfd/stericsson,db8500-prcmu.yaml
+++ b/Documentation/devicetree/bindings/mfd/stericsson,db8500-prcmu.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: ST-Ericsson DB8500 PRCMU - Power Reset and Control Management Unit

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 description:
  The DB8500 Power Reset and Control Management Unit is an XP70 8-bit
--- a/Documentation/devicetree/bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml
+++ b/Documentation/devicetree/bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml
@@ -8,7 +8,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Intel IXP4xx AHB Queue Manager

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 description: |
  The IXP4xx AHB Queue Manager maintains queues as circular buffers in
--- a/Documentation/devicetree/bindings/misc/pci1de4,1.yaml
+++ b/Documentation/devicetree/bindings/misc/pci1de4,1.yaml
@@ -25,6 +25,10 @@ properties:
    items:
      - const: pci1de4,1

+  reg:
+    maxItems: 1
+    description: The PCI Bus-Device-Function address.
+
  '#interrupt-cells':
    const: 2
    description: |
@@ -101,6 +105,7 @@ unevaluatedProperties: false

 required:
  - compatible
+  - reg
  - '#interrupt-cells'
  - interrupt-controller
  - pci-ep-bus@1
@@ -111,8 +116,9 @@ examples:
        #address-cells = <3>;
        #size-cells = <2>;

-        rp1@0,0 {
+        dev@0,0 {
            compatible = "pci1de4,1";
+            reg = <0x10000 0x0 0x0 0x0 0x0>;
            ranges = <0x01 0x00 0x00000000  0x82010000 0x00 0x00  0x00 0x400000>;
            #address-cells = <3>;
            #size-cells = <2>;
--- a/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml
+++ b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: ARM PrimeCell MultiMedia Card Interface (MMCI) PL180 and PL181

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>
  - Ulf Hansson <ulf.hansson@linaro.org>

 description:
--- a/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
+++ b/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
@@ -41,7 +41,7 @@ properties:
 patternProperties:
  "^sdhci@[0-9a-f]+$":
    type: object
-    $ref: mmc-controller.yaml
+    $ref: sdhci-common.yaml
    unevaluatedProperties: false

    properties:
--- a/Documentation/devicetree/bindings/mtd/partitions/arm,arm-firmware-suite.yaml
+++ b/Documentation/devicetree/bindings/mtd/partitions/arm,arm-firmware-suite.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: ARM Firmware Suite (AFS) Partitions

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 select: false

--- a/Documentation/devicetree/bindings/mtd/partitions/redboot-fis.yaml
+++ b/Documentation/devicetree/bindings/mtd/partitions/redboot-fis.yaml
@@ -14,7 +14,7 @@ description: The FLASH Image System (FIS) directory is a flash description
    32 KB in size.

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 select: false

--- a/Documentation/devicetree/bindings/mtd/partitions/seama.yaml
+++ b/Documentation/devicetree/bindings/mtd/partitions/seama.yaml
@@ -18,7 +18,7 @@ allOf:
  - $ref: partition.yaml#

 maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
+  - Linus Walleij <linusw@kernel.org>

 properties:
  compatible:
--- a/Show More
+++ b/Show More