staging: wilc1000: fix line over 80 characters in spi_cmd_complete()

Refactor spi_cmd_complete() to fix the line over 80 char issues reported
by checkpatch.pl script.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/wilc1000/wilc_spi.c

@@ -287,17 +287,19 @@ static int spi_cmd_complete(struct wilc *wilc, u8 cmd, u32 adr, u8 *b, u32 sz,
 	u8 rsp;
 	int len = 0;
 	int result = N_OK;
+	int retry;
+	u8 crc[2];
 
 	wb[0] = cmd;
 	switch (cmd) {
-	case CMD_SINGLE_READ:                           /* single word (4 bytes) read */
+	case CMD_SINGLE_READ: /* single word (4 bytes) read */
 		wb[1] = (u8)(adr >> 16);
 		wb[2] = (u8)(adr >> 8);
 		wb[3] = (u8)adr;
 		len = 5;
 		break;
 
-	case CMD_INTERNAL_READ:                 /* internal register read */
+	case CMD_INTERNAL_READ: /* internal register read */
 		wb[1] = (u8)(adr >> 8);
 		if (clockless == 1)
 			wb[1] |= BIT(7);
@@ -306,29 +308,29 @@ static int spi_cmd_complete(struct wilc *wilc, u8 cmd, u32 adr, u8 *b, u32 sz,
 		len = 5;
 		break;
 
-	case CMD_TERMINATE:                                     /* termination */
+	case CMD_TERMINATE:
 		wb[1] = 0x00;
 		wb[2] = 0x00;
 		wb[3] = 0x00;
 		len = 5;
 		break;
 
-	case CMD_REPEAT:                                                /* repeat */
+	case CMD_REPEAT:
 		wb[1] = 0x00;
 		wb[2] = 0x00;
 		wb[3] = 0x00;
 		len = 5;
 		break;
 
-	case CMD_RESET:                                                 /* reset */
+	case CMD_RESET:
 		wb[1] = 0xff;
 		wb[2] = 0xff;
 		wb[3] = 0xff;
 		len = 5;
 		break;
 
-	case CMD_DMA_WRITE:                                     /* dma write */
-	case CMD_DMA_READ:                                      /* dma read */
+	case CMD_DMA_WRITE: /* dma write */
+	case CMD_DMA_READ:  /* dma read */
 		wb[1] = (u8)(adr >> 16);
 		wb[2] = (u8)(adr >> 8);
 		wb[3] = (u8)adr;
@@ -337,8 +339,8 @@ static int spi_cmd_complete(struct wilc *wilc, u8 cmd, u32 adr, u8 *b, u32 sz,
 		len = 7;
 		break;
 
-	case CMD_DMA_EXT_WRITE:         /* dma extended write */
-	case CMD_DMA_EXT_READ:                  /* dma extended read */
+	case CMD_DMA_EXT_WRITE: /* dma extended write */
+	case CMD_DMA_EXT_READ:  /* dma extended read */
 		wb[1] = (u8)(adr >> 16);
 		wb[2] = (u8)(adr >> 8);
 		wb[3] = (u8)adr;
@@ -348,7 +350,7 @@ static int spi_cmd_complete(struct wilc *wilc, u8 cmd, u32 adr, u8 *b, u32 sz,
 		len = 8;
 		break;
 
-	case CMD_INTERNAL_WRITE:                /* internal register write */
+	case CMD_INTERNAL_WRITE: /* internal register write */
 		wb[1] = (u8)(adr >> 8);
 		if (clockless == 1)
 			wb[1] |= BIT(7);
@@ -360,7 +362,7 @@ static int spi_cmd_complete(struct wilc *wilc, u8 cmd, u32 adr, u8 *b, u32 sz,
 		len = 8;
 		break;
 
-	case CMD_SINGLE_WRITE:                  /* single word write */
+	case CMD_SINGLE_WRITE: /* single word write */
 		wb[1] = (u8)(adr >> 16);
 		wb[2] = (u8)(adr >> 8);
 		wb[3] = (u8)(adr);
@@ -395,13 +397,12 @@ static int spi_cmd_complete(struct wilc *wilc, u8 cmd, u32 adr, u8 *b, u32 sz,
 	    cmd == CMD_REPEAT) {
 		len2 = len + (NUM_SKIP_BYTES + NUM_RSP_BYTES + NUM_DUMMY_BYTES);
 	} else if (cmd == CMD_INTERNAL_READ || cmd == CMD_SINGLE_READ) {
-		if (!g_spi.crc_off) {
-			len2 = len + (NUM_RSP_BYTES + NUM_DATA_HDR_BYTES + NUM_DATA_BYTES
-				      + NUM_CRC_BYTES + NUM_DUMMY_BYTES);
-		} else {
-			len2 = len + (NUM_RSP_BYTES + NUM_DATA_HDR_BYTES + NUM_DATA_BYTES
-				      + NUM_DUMMY_BYTES);
-		}
+		int tmp = NUM_RSP_BYTES + NUM_DATA_HDR_BYTES + NUM_DATA_BYTES
+			+ NUM_DUMMY_BYTES;
+		if (!g_spi.crc_off)
+			len2 = len + tmp + NUM_CRC_BYTES;
+		else
+			len2 = len + tmp;
 	} else {
 		len2 = len + (NUM_RSP_BYTES + NUM_DUMMY_BYTES);
 	}
@@ -425,11 +426,8 @@ static int spi_cmd_complete(struct wilc *wilc, u8 cmd, u32 adr, u8 *b, u32 sz,
 	/*
 	 * Command/Control response
 	 */
-	if (cmd == CMD_RESET ||
-	    cmd == CMD_TERMINATE ||
-	    cmd == CMD_REPEAT) {
-		rix++;         /* skip 1 byte */
-	}
+	if (cmd == CMD_RESET || cmd == CMD_TERMINATE || cmd == CMD_REPEAT)
+		rix++; /* skip 1 byte */
 
 	rsp = rb[rix++];
 
@@ -452,8 +450,6 @@ static int spi_cmd_complete(struct wilc *wilc, u8 cmd, u32 adr, u8 *b, u32 sz,
 
 	if (cmd == CMD_INTERNAL_READ || cmd == CMD_SINGLE_READ ||
 	    cmd == CMD_DMA_READ || cmd == CMD_DMA_EXT_READ) {
-		int retry;
-		u8 crc[2];
 		/*
 		 * Data Respnose header
 		 */
@@ -478,132 +474,134 @@ static int spi_cmd_complete(struct wilc *wilc, u8 cmd, u32 adr, u8 *b, u32 sz,
 				"Error, data read response (%02x)\n", rsp);
 			return N_RESET;
 		}
+	}
+
+	if (cmd == CMD_INTERNAL_READ || cmd == CMD_SINGLE_READ) {
+		/*
+		 * Read bytes
+		 */
+		if ((rix + 3) < len2) {
+			b[0] = rb[rix++];
+			b[1] = rb[rix++];
+			b[2] = rb[rix++];
+			b[3] = rb[rix++];
+		} else {
+			dev_err(&spi->dev,
+				"buffer overrun when reading data.\n");
+			return N_FAIL;
+		}
+
+		if (!g_spi.crc_off) {
+			/*
+			 * Read Crc
+			 */
+			if ((rix + 1) < len2) {
+				crc[0] = rb[rix++];
+				crc[1] = rb[rix++];
+			} else {
+				dev_err(&spi->dev,
+					"buffer overrun when reading crc.\n");
+				return N_FAIL;
+			}
+		}
+	} else if ((cmd == CMD_DMA_READ) || (cmd == CMD_DMA_EXT_READ)) {
+		int ix;
+
+		/* some data may be read in response to dummy bytes. */
+		for (ix = 0; (rix < len2) && (ix < sz); )
+			b[ix++] = rb[rix++];
+
+		sz -= ix;
+
+		if (sz > 0) {
+			int nbytes;
+
+			if (sz <= (DATA_PKT_SZ - ix))
+				nbytes = sz;
+			else
+				nbytes = DATA_PKT_SZ - ix;
 
-		if (cmd == CMD_INTERNAL_READ || cmd == CMD_SINGLE_READ) {
 			/*
 			 * Read bytes
 			 */
-			if ((rix + 3) < len2) {
-				b[0] = rb[rix++];
-				b[1] = rb[rix++];
-				b[2] = rb[rix++];
-				b[3] = rb[rix++];
-			} else {
+			if (wilc_spi_rx(wilc, &b[ix], nbytes)) {
 				dev_err(&spi->dev,
-					"buffer overrun when reading data.\n");
-				return N_FAIL;
-			}
-
-			if (!g_spi.crc_off) {
-				/*
-				 * Read Crc
-				 */
-				if ((rix + 1) < len2) {
-					crc[0] = rb[rix++];
-					crc[1] = rb[rix++];
-				} else {
-					dev_err(&spi->dev, "buffer overrun when reading crc.\n");
-					return N_FAIL;
-				}
-			}
-		} else if ((cmd == CMD_DMA_READ) || (cmd == CMD_DMA_EXT_READ)) {
-			int ix;
-
-			/* some data may be read in response to dummy bytes. */
-			for (ix = 0; (rix < len2) && (ix < sz); )
-				b[ix++] = rb[rix++];
-
-			sz -= ix;
-
-			if (sz > 0) {
-				int nbytes;
-
-				if (sz <= (DATA_PKT_SZ - ix))
-					nbytes = sz;
-				else
-					nbytes = DATA_PKT_SZ - ix;
-
-				/*
-				 * Read bytes
-				 */
-				if (wilc_spi_rx(wilc, &b[ix], nbytes)) {
-					dev_err(&spi->dev, "Failed data block read, bus error...\n");
-					result = N_FAIL;
-					goto _error_;
-				}
-
-				/*
-				 * Read Crc
-				 */
-				if (!g_spi.crc_off) {
-					if (wilc_spi_rx(wilc, crc, 2)) {
-						dev_err(&spi->dev, "Failed data block crc read, bus error...\n");
-						result = N_FAIL;
-						goto _error_;
-					}
-				}
-
-				ix += nbytes;
-				sz -= nbytes;
+					"Failed block read, bus err\n");
+				result = N_FAIL;
+				goto _error_;
 			}
 
 			/*
-			 * if any data in left unread,
-			 * then read the rest using normal DMA code.
+			 * Read Crc
 			 */
-			while (sz > 0) {
-				int nbytes;
+			if (!g_spi.crc_off && wilc_spi_rx(wilc, crc, 2)) {
+				dev_err(&spi->dev,
+					"Failed block crc read, bus err\n");
+				result = N_FAIL;
+				goto _error_;
+			}
 
-				if (sz <= DATA_PKT_SZ)
-					nbytes = sz;
-				else
-					nbytes = DATA_PKT_SZ;
+			ix += nbytes;
+			sz -= nbytes;
+		}
 
-				/*
-				 * read data response only on the next DMA cycles not
-				 * the first DMA since data response header is already
-				 * handled above for the first DMA.
-				 */
-				/*
-				 * Data Respnose header
-				 */
-				retry = 10;
-				do {
-					if (wilc_spi_rx(wilc, &rsp, 1)) {
-						dev_err(&spi->dev, "Failed data response read, bus error...\n");
-						result = N_FAIL;
-						break;
-					}
-					if (((rsp >> 4) & 0xf) == 0xf)
-						break;
-				} while (retry--);
+		/*
+		 * if any data in left unread,
+		 * then read the rest using normal DMA code.
+		 */
+		while (sz > 0) {
+			int nbytes;
 
-				if (result == N_FAIL)
-					break;
+			if (sz <= DATA_PKT_SZ)
+				nbytes = sz;
+			else
+				nbytes = DATA_PKT_SZ;
 
-				/*
-				 * Read bytes
-				 */
-				if (wilc_spi_rx(wilc, &b[ix], nbytes)) {
-					dev_err(&spi->dev, "Failed data block read, bus error...\n");
+			/*
+			 * read data response only on the next DMA cycles not
+			 * the first DMA since data response header is already
+			 * handled above for the first DMA.
+			 */
+			/*
+			 * Data Respnose header
+			 */
+			retry = 10;
+			do {
+				if (wilc_spi_rx(wilc, &rsp, 1)) {
+					dev_err(&spi->dev,
+						"Failed resp read, bus err\n");
 					result = N_FAIL;
 					break;
 				}
+				if (((rsp >> 4) & 0xf) == 0xf)
+					break;
+			} while (retry--);
 
-				/*
-				 * Read Crc
-				 */
-				if (!g_spi.crc_off) {
-					if (wilc_spi_rx(wilc, crc, 2)) {
-						dev_err(&spi->dev, "Failed data block crc read, bus error...\n");
-						result = N_FAIL;
-						break;
-					}
-				}
+			if (result == N_FAIL)
+				break;
 
-				ix += nbytes;
-				sz -= nbytes;
+			/*
+			 * Read bytes
+			 */
+			if (wilc_spi_rx(wilc, &b[ix], nbytes)) {
+				dev_err(&spi->dev,
+					"Failed block read, bus err\n");
+				result = N_FAIL;
+				break;
 			}
+
+			/*
+			 * Read Crc
+			 */
+			if (!g_spi.crc_off && wilc_spi_rx(wilc, crc, 2)) {
+				dev_err(&spi->dev,
+					"Failed block crc read, bus err\n");
+				result = N_FAIL;
+				break;
+			}
+
+			ix += nbytes;
+			sz -= nbytes;
 		}
 	}
 _error_: