mirrors/linux
2
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git synced 2026-05-09 10:11:52 -04:00
Code Issues Packages Projects Releases Wiki Activity

arm64: dts: qcom: sa8775p-ride: enable ethernet0

Browse Source 
Enable the first 1Gb ethernet port on sa8775p-ride development board.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230622120142.218055-6-brgl@bgdev.pl
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This commit is contained in:
Bartosz Golaszewski
2023-06-22 14:01:42 +02:00
committed by Bjorn Andersson
parent 48c9952999
commit 120ab6c06f
1 changed files with 88 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

88
arch/arm64/boot/dts/qcom/sa8775p-ride.dts
View File

@@ -261,6 +261,94 @@ vreg_l8e: ldo8 {
};
};
&ethernet0 {
phy-mode = "sgmii";
phy-handle = <&sgmii_phy>;
pinctrl-0 = <&ethernet0_default>;
pinctrl-names = "default";
snps,mtl-rx-config = <&mtl_rx_setup>;
snps,mtl-tx-config = <&mtl_tx_setup>;
snps,ps-speed = <1000>;
status = "okay";
mdio {
compatible = "snps,dwmac-mdio";
#address-cells = <1>;
#size-cells = <0>;
reset-gpios = <&pmm8654au_2_gpios 8 GPIO_ACTIVE_LOW>;
reset-delay-us = <11000>;
reset-post-delay-us = <70000>;
sgmii_phy: phy@8 {
reg = <0x8>;
device_type = "ethernet-phy";
};
};
mtl_rx_setup: rx-queues-config {
snps,rx-queues-to-use = <4>;
snps,rx-sched-sp;
queue0 {
snps,dcb-algorithm;
snps,map-to-dma-channel = <0x0>;
snps,route-up;
snps,priority = <0x1>;
};
queue1 {
snps,dcb-algorithm;
snps,map-to-dma-channel = <0x1>;
snps,route-ptp;
};
queue2 {
snps,avb-algorithm;
snps,map-to-dma-channel = <0x2>;
snps,route-avcp;
};
queue3 {
snps,avb-algorithm;
snps,map-to-dma-channel = <0x3>;
snps,priority = <0xc>;
};
};
mtl_tx_setup: tx-queues-config {
snps,tx-queues-to-use = <4>;
snps,tx-sched-sp;
queue0 {
snps,dcb-algorithm;
};
queue1 {
snps,dcb-algorithm;
};
queue2 {
snps,avb-algorithm;
snps,send_slope = <0x1000>;
snps,idle_slope = <0x1000>;
snps,high_credit = <0x3e800>;
snps,low_credit = <0xffc18000>;
};
queue3 {
snps,avb-algorithm;
snps,send_slope = <0x1000>;
snps,idle_slope = <0x1000>;
snps,high_credit = <0x3e800>;
snps,low_credit = <0xffc18000>;
};
};
};
&i2c11 {
clock-frequency = <400000>;
pinctrl-0 = <&qup_i2c11_default>;