mirrors/linux
2
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git synced 2026-05-12 15:08:25 -04:00
Code Issues Packages Projects Releases Wiki Activity

arm64: dts: rockchip: Correct GPIO polarity on brcm BT nodes

Browse Source 
Paragraph "3.4 Power up Timing Sequence" of the AzureWave-CM256SM
datasheet mentions the following about the BT_REG_ON pin, which is
connected to GPIO0_C4_d:

  When this pin is low and WL_REG_ON is high,
  the BT section is in reset.

Therefor set that pin to GPIO_ACTIVE_HIGH so that it can be pulled low
for a reset.
If set to GPIO_ACTIVE_LOW, the following errors are observed:

  Bluetooth: hci0: command 0x0c03 tx timeout
  Bluetooth: hci0: BCM: Reset failed (-110)

So fix the GPIO polarity by setting it to ACTIVE_HIGH.
This also matches what other devices with the same BT device have.

Fixes: 2b6a3f8575 ("arm64: dts: rockchip: Fix reset-gpios property on brcm BT nodes")
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20241018145053.11928-2-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This commit is contained in:
Diederik de Haas
2024-10-18 16:45:50 +02:00
committed by Heiko Stuebner
parent a4dca88c9c
commit 08846522d9
2 changed files with 2 additions and 2 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi
View File

@@ -688,7 +688,7 @@ bluetooth {
host-wakeup-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&bt_enable_h>, <&bt_host_wake_l>, <&bt_wake_h>;
pinctrl-names = "default";
shutdown-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_LOW>;
shutdown-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
vbat-supply = <&vcc_wl>;
vddio-supply = <&vcca_1v8_pmu>;
};

2
arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi
View File

@@ -404,7 +404,7 @@ bluetooth {
host-wakeup-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&bt_host_wake_h &bt_reg_on_h &bt_wake_host_h>;
shutdown-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_LOW>;
shutdown-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
vbat-supply = <&vcc_3v3>;
vddio-supply = <&vcc_1v8>;
};