Add some MacOS ZSH Config

.gitignore

@@ -1,2 +1,6 @@
-nvim-config/
-setup_neovim.sh
+# Ignore dynamic nwg-displays hypr configs
+configs/hyprland/monitors.conf
+configs/hyprland/workspaces.conf
+
+# Ignore btop logs
+configs/btop/btop.log

configs/anyrun/applications.ron

@@ -0,0 +1,14 @@
+Config(
+  // Also show the Desktop Actions defined in the desktop files, e.g. "New Window" from LibreWolf
+  desktop_actions: false,
+  max_entries: 5, 
+  // The terminal used for running terminal based desktop entries, if left as `None` a static list of terminals is used
+  // to determine what terminal to use.
+  terminal: Some(Terminal(
+    // The main terminal command
+    command: "kitty",
+    // What arguments should be passed to the terminal process to run the command correctly
+    // {} is replaced with the command in the desktop entry
+    args: "-e {}",
+  )),
+)

configs/anyrun/config.ron

@@ -0,0 +1,52 @@
+Config(
+  // Position/size fields use an enum for the value, it can be either:
+  // Absolute(n): The absolute value in pixels
+  // Fraction(n): A fraction of the width or height of the full screen (depends on exclusive zones and the settings related to them) window respectively
+
+  // The horizontal position, adjusted so that Relative(0.5) always centers the runner
+  x: Fraction(0.5),
+
+  // The vertical position, works the same as `x`
+  y: Fraction(0.300000),
+
+  // The width of the runner
+  width: Fraction(0.250000),
+
+  // The minimum height of the runner, the runner will expand to fit all the entries
+  height: Absolute(0),
+
+  // Hide match and plugin info icons
+  hide_icons: false,
+
+  // ignore exclusive zones, f.e. Waybar
+  ignore_exclusive_zones: false,
+
+  // Layer shell layer: Background, Bottom, Top, Overlay
+  layer: Overlay,
+
+  // Hide the plugin info panel
+  hide_plugin_info: true, // DEFAULT: false
+
+  // Close window when a click outside the main box is received
+  close_on_click: true, // DEFAULT: false
+
+  // Show search results immediately when Anyrun starts
+  show_results_immediately: true, // DEFAULT: true
+
+  // Limit amount of entries shown in total
+  max_entries: None,
+
+  // List of plugins to be loaded by default, can be specified with a relative path to be loaded from the
+  // `<anyrun config dir>/plugins` directory or with an absolute path to just load the file the path points to.
+  plugins: [
+    // On by default, but disabled for me:
+    // "libsymbols.so",
+
+    "libapplications.so",
+    "libshell.so",
+    "libtranslate.so",
+    "libdictionary.so",
+    "librink.so",
+    "libwebsearch.so",
+  ],
+)

configs/anyrun/dictionary.ron

@@ -0,0 +1,4 @@
+Config(
+    prefix: ":def",
+    max_entries: 5,
+)

configs/anyrun/style.css

@@ -0,0 +1,50 @@
+/* Stolen From: https://github.com/fufexan/dotfiles/blob/main/home/programs/anyrun/style-dark.css */
+* {
+  all: unset;
+  font-family: "NotoSansM Nerd Font", monospace;
+  font-size: 1.2rem;
+}
+
+#window,
+#match,
+#entry,
+#plugin,
+#main {
+  background: transparent;
+}
+
+#match.activatable {
+  border-radius: 8px;
+  margin: 4px 0;
+  padding: 4px;
+  transition: 100ms ease-out;
+}
+#match.activatable:first-child {
+  margin-top: 12px;
+}
+#match.activatable:last-child {
+  margin-bottom: 0;
+}
+
+#match:hover {
+  background: rgba(255, 255, 255, 0.05);
+}
+#match:selected {
+  background: rgba(255, 255, 255, 0.1);
+}
+
+#entry {
+  background: rgba(255, 255, 255, 0.05);
+  border: 1px solid rgba(255, 255, 255, 0.1);
+  border-radius: 8px;
+  padding: 4px 8px;
+}
+
+box#main {
+  background: rgba(0, 0, 0, 0.5);
+  box-shadow:
+    inset 0 0 0 1px rgba(255, 255, 255, 0.1),
+    0 30px 30px 15px rgba(0, 0, 0, 0.5);
+  border-radius: 20px;
+  padding: 12px;
+}

configs/anyrun/translate.ron

@@ -0,0 +1,5 @@
+Config(
+    prefix: ":tr ",
+    language_delimiter: " to ",
+    max_entries: 3,
+)

configs/btop/btop.conf

@@ -0,0 +1,248 @@
+#? Config file for btop v. 1.4.0
+
+#* Name of a btop++/bpytop/bashtop formatted ".theme" file, "Default" and "TTY" for builtin themes.
+#* Themes should be placed in "../share/btop/themes" relative to binary or "$HOME/.config/btop/themes"
+color_theme = "Default"
+
+#* If the theme set background should be shown, set to False if you want terminal background transparency.
+theme_background = True
+
+#* Sets if 24-bit truecolor should be used, will convert 24-bit colors to 256 color (6x6x6 color cube) if false.
+truecolor = True
+
+#* Set to true to force tty mode regardless if a real tty has been detected or not.
+#* Will force 16-color mode and TTY theme, set all graph symbols to "tty" and swap out other non tty friendly symbols.
+force_tty = False
+
+#* Define presets for the layout of the boxes. Preset 0 is always all boxes shown with default settings. Max 9 presets.
+#* Format: "box_name:P:G,box_name:P:G" P=(0 or 1) for alternate positions, G=graph symbol to use for box.
+#* Use whitespace " " as separator between different presets.
+#* Example: "cpu:0:default,mem:0:tty,proc:1:default cpu:0:braille,proc:0:tty"
+presets = "cpu:1:default,proc:0:default cpu:0:default,mem:0:default,net:0:default cpu:0:block,net:0:tty"
+
+#* Set to True to enable "h,j,k,l,g,G" keys for directional control in lists.
+#* Conflicting keys for h:"help" and k:"kill" is accessible while holding shift.
+vim_keys = False
+
+#* Rounded corners on boxes, is ignored if TTY mode is ON.
+rounded_corners = True
+
+#* Default symbols to use for graph creation, "braille", "block" or "tty".
+#* "braille" offers the highest resolution but might not be included in all fonts.
+#* "block" has half the resolution of braille but uses more common characters.
+#* "tty" uses only 3 different symbols but will work with most fonts and should work in a real TTY.
+#* Note that "tty" only has half the horizontal resolution of the other two, so will show a shorter historical view.
+graph_symbol = "braille"
+
+# Graph symbol to use for graphs in cpu box, "default", "braille", "block" or "tty".
+graph_symbol_cpu = "default"
+
+# Graph symbol to use for graphs in gpu box, "default", "braille", "block" or "tty".
+graph_symbol_gpu = "default"
+
+# Graph symbol to use for graphs in cpu box, "default", "braille", "block" or "tty".
+graph_symbol_mem = "default"
+
+# Graph symbol to use for graphs in cpu box, "default", "braille", "block" or "tty".
+graph_symbol_net = "default"
+
+# Graph symbol to use for graphs in cpu box, "default", "braille", "block" or "tty".
+graph_symbol_proc = "default"
+
+#* Manually set which boxes to show. Available values are "cpu mem net proc" and "gpu0" through "gpu5", separate values with whitespace.
+shown_boxes = "cpu mem net proc"
+
+#* Update time in milliseconds, recommended 2000 ms or above for better sample times for graphs.
+update_ms = 100
+
+#* Processes sorting, "pid" "program" "arguments" "threads" "user" "memory" "cpu lazy" "cpu direct",
+#* "cpu lazy" sorts top process over time (easier to follow), "cpu direct" updates top process directly.
+proc_sorting = "cpu lazy"
+
+#* Reverse sorting order, True or False.
+proc_reversed = False
+
+#* Show processes as a tree.
+proc_tree = False
+
+#* Use the cpu graph colors in the process list.
+proc_colors = True
+
+#* Use a darkening gradient in the process list.
+proc_gradient = True
+
+#* If process cpu usage should be of the core it's running on or usage of the total available cpu power.
+proc_per_core = False
+
+#* Show process memory as bytes instead of percent.
+proc_mem_bytes = True
+
+#* Show cpu graph for each process.
+proc_cpu_graphs = True
+
+#* Use /proc/[pid]/smaps for memory information in the process info box (very slow but more accurate)
+proc_info_smaps = False
+
+#* Show proc box on left side of screen instead of right.
+proc_left = False
+
+#* (Linux) Filter processes tied to the Linux kernel(similar behavior to htop).
+proc_filter_kernel = False
+
+#* In tree-view, always accumulate child process resources in the parent process.
+proc_aggregate = False
+
+#* Sets the CPU stat shown in upper half of the CPU graph, "total" is always available.
+#* Select from a list of detected attributes from the options menu.
+cpu_graph_upper = "Auto"
+
+#* Sets the CPU stat shown in lower half of the CPU graph, "total" is always available.
+#* Select from a list of detected attributes from the options menu.
+cpu_graph_lower = "Auto"
+
+#* If gpu info should be shown in the cpu box. Available values = "Auto", "On" and "Off".
+show_gpu_info = "Auto"
+
+#* Toggles if the lower CPU graph should be inverted.
+cpu_invert_lower = True
+
+#* Set to True to completely disable the lower CPU graph.
+cpu_single_graph = False
+
+#* Show cpu box at bottom of screen instead of top.
+cpu_bottom = False
+
+#* Shows the system uptime in the CPU box.
+show_uptime = True
+
+#* Show cpu temperature.
+check_temp = True
+
+#* Which sensor to use for cpu temperature, use options menu to select from list of available sensors.
+cpu_sensor = "Auto"
+
+#* Show temperatures for cpu cores also if check_temp is True and sensors has been found.
+show_coretemp = True
+
+#* Set a custom mapping between core and coretemp, can be needed on certain cpus to get correct temperature for correct core.
+#* Use lm-sensors or similar to see which cores are reporting temperatures on your machine.
+#* Format "x:y" x=core with wrong temp, y=core with correct temp, use space as separator between multiple entries.
+#* Example: "4:0 5:1 6:3"
+cpu_core_map = ""
+
+#* Which temperature scale to use, available values: "celsius", "fahrenheit", "kelvin" and "rankine".
+temp_scale = "celsius"
+
+#* Use base 10 for bits/bytes sizes, KB = 1000 instead of KiB = 1024.
+base_10_sizes = False
+
+#* Show CPU frequency.
+show_cpu_freq = True
+
+#* Draw a clock at top of screen, formatting according to strftime, empty string to disable.
+#* Special formatting: /host = hostname | /user = username | /uptime = system uptime
+clock_format = "%X"
+
+#* Update main ui in background when menus are showing, set this to false if the menus is flickering too much for comfort.
+background_update = True
+
+#* Custom cpu model name, empty string to disable.
+custom_cpu_name = ""
+
+#* Optional filter for shown disks, should be full path of a mountpoint, separate multiple values with whitespace " ".
+#* Begin line with "exclude=" to change to exclude filter, otherwise defaults to "most include" filter. Example: disks_filter="exclude=/boot /home/user".
+disks_filter = ""
+
+#* Show graphs instead of meters for memory values.
+mem_graphs = True
+
+#* Show mem box below net box instead of above.
+mem_below_net = False
+
+#* Count ZFS ARC in cached and available memory.
+zfs_arc_cached = True
+
+#* If swap memory should be shown in memory box.
+show_swap = True
+
+#* Show swap as a disk, ignores show_swap value above, inserts itself after first disk.
+swap_disk = True
+
+#* If mem box should be split to also show disks info.
+show_disks = True
+
+#* Filter out non physical disks. Set this to False to include network disks, RAM disks and similar.
+only_physical = True
+
+#* Read disks list from /etc/fstab. This also disables only_physical.
+use_fstab = True
+
+#* Setting this to True will hide all datasets, and only show ZFS pools. (IO stats will be calculated per-pool)
+zfs_hide_datasets = False
+
+#* Set to true to show available disk space for privileged users.
+disk_free_priv = True
+
+#* Toggles if io activity % (disk busy time) should be shown in regular disk usage view.
+show_io_stat = True
+
+#* Toggles io mode for disks, showing big graphs for disk read/write speeds.
+io_mode = True
+
+#* Set to True to show combined read/write io graphs in io mode.
+io_graph_combined = False
+
+#* Set the top speed for the io graphs in MiB/s (100 by default), use format "mountpoint:speed" separate disks with whitespace " ".
+#* Example: "/mnt/media:100 /:20 /boot:1".
+io_graph_speeds = ""
+
+#* Set fixed values for network graphs in Mebibits. Is only used if net_auto is also set to False.
+net_download = 100
+
+net_upload = 100
+
+#* Use network graphs auto rescaling mode, ignores any values set above and rescales down to 10 Kibibytes at the lowest.
+net_auto = True
+
+#* Sync the auto scaling for download and upload to whichever currently has the highest scale.
+net_sync = True
+
+#* Starts with the Network Interface specified here.
+net_iface = ""
+
+#* Show battery stats in top right if battery is present.
+show_battery = True
+
+#* Which battery to use if multiple are present. "Auto" for auto detection.
+selected_battery = "Auto"
+
+#* Show power stats of battery next to charge indicator.
+show_battery_watts = True
+
+#* Set loglevel for "~/.config/btop/btop.log" levels are: "ERROR" "WARNING" "INFO" "DEBUG".
+#* The level set includes all lower levels, i.e. "DEBUG" will show all logging info.
+log_level = "WARNING"
+
+#* Measure PCIe throughput on NVIDIA cards, may impact performance on certain cards.
+nvml_measure_pcie_speeds = True
+
+#* Horizontally mirror the GPU graph.
+gpu_mirror_graph = True
+
+#* Custom gpu0 model name, empty string to disable.
+custom_gpu_name0 = ""
+
+#* Custom gpu1 model name, empty string to disable.
+custom_gpu_name1 = ""
+
+#* Custom gpu2 model name, empty string to disable.
+custom_gpu_name2 = ""
+
+#* Custom gpu3 model name, empty string to disable.
+custom_gpu_name3 = ""
+
+#* Custom gpu4 model name, empty string to disable.
+custom_gpu_name4 = ""
+
+#* Custom gpu5 model name, empty string to disable.
+custom_gpu_name5 = ""

configs/gitconfig

@@ -3,3 +3,7 @@
 	name = Aaron Gorodetzky
 [credential]
 	helper = store --file ~/.git-credentials
+[init]
+	defaultBranch = main
+[pull]
+	rebase = true

configs/hyprland/hyprland.conf

@@ -0,0 +1,144 @@
+# exec-once = /nix/store/i4rg4244x7fqvsbh6qbx848lfrhy3x3c-dbus-1.14.10/bin/dbus-update-activation-environment --systemd DISPLAY HYPRLAND_INSTANCE_SIGNATURE WAYLAND_DISPLAY XDG_CURRENT_DESKTOP && systemctl --user stop hyprland-session.target && systemctl --user start hyprland-session.target
+
+# Use ALT for Modifier Key
+$mod=ALT
+
+animations {
+  bezier=myBezier, 0.05, 0.9, 0.1, 1.05
+  animation=windows, 1, 7, myBezier
+  animation=windowsOut, 1, 7, default, popin 80%
+  animation=border, 1, 10, default
+  animation=borderangle, 1, 8, default
+  animation=fade, 1, 7, default
+  animation=workspaces, 1, 6, default
+  enabled=yes
+}
+
+debug {
+  disable_logs=false
+}
+
+# decoration {
+#   blur {
+#     enabled=true
+#     passes=1
+#     size=3
+#   }
+#   col.shadow=rgba(1a1a1aee)
+#   drop_shadow=yes
+#   rounding=10
+#   shadow_range=4
+#   shadow_render_power=3
+# }
+
+dwindle {
+  preserve_split=yes
+  pseudotile=yes
+}
+
+general {
+  allow_tearing=false
+  border_size=4
+  col.active_border=rgba(33ccffee) rgba(00ff99ee) 45deg
+  col.inactive_border=rgba(595959aa)
+  gaps_in=16
+  gaps_out=32
+  layout=dwindle
+}
+
+gestures {
+  workspace_swipe=true
+  workspace_swipe_fingers=4
+}
+
+input {
+  touchpad {
+    clickfinger_behavior=true
+    disable_while_typing=yes
+    natural_scroll=yes
+  }
+  follow_mouse=1
+  kb_layout=us
+  kb_options=ctrl:nocaps
+  sensitivity=0
+}
+
+master {
+  mfact=0.50
+  new_on_active=after
+  new_status=slave
+  orientation=center
+}
+
+misc {
+  force_default_wallpaper=-1
+}
+
+# Keybinds
+bind=$mod, p, exec, anyrun
+bind=$mod, Return, exec, kitty
+bind=$mod, SPACE, togglefloating,
+bind=$mod, f, fullscreen
+bind=$mod, c, killactive
+bind=$mod SHIFT, t, pseudo,
+bind=$mod, V, togglesplit,
+bind=$mod SHIFT, h, movewindow, l
+bind=$mod SHIFT, j, movewindow, d
+bind=$mod SHIFT, k, movewindow, u
+bind=$mod SHIFT, l, movewindow, r
+bind=$mod, h, movefocus, l
+bind=$mod, l, movefocus, r
+bind=$mod, k, movefocus, u
+bind=$mod, j, movefocus, d
+bind=$mod, S, togglespecialworkspace, magic
+bind=$mod SHIFT, S, movetoworkspace, special:magic
+bind=$mod, 1, workspace, 1
+bind=$mod, 2, workspace, 2
+bind=$mod, 3, workspace, 3
+bind=$mod, 4, workspace, 4
+bind=$mod, 5, workspace, 5
+bind=$mod, 6, workspace, 6
+bind=$mod, 7, workspace, 7
+bind=$mod, 8, workspace, 8
+bind=$mod, 9, workspace, 9
+bind=$mod, 0, workspace, 10
+bind=$mod SHIFT, 1, movetoworkspace, 1
+bind=$mod SHIFT, 2, movetoworkspace, 2
+bind=$mod SHIFT, 3, movetoworkspace, 3
+bind=$mod SHIFT, 4, movetoworkspace, 4
+bind=$mod SHIFT, 5, movetoworkspace, 5
+bind=$mod SHIFT, 6, movetoworkspace, 6
+bind=$mod SHIFT, 7, movetoworkspace, 7
+bind=$mod SHIFT, 8, movetoworkspace, 8
+bind=$mod SHIFT, 9, movetoworkspace, 9
+bind=$mod SHIFT, 0, movetoworkspace, 10
+
+# Mouse Binds
+bindm = $mod SUPER, mouse:272, movewindow
+bindm = $mod SUPER, mouse:273, resizewindowpixel
+bindm = SUPER, ALT_L, movewindow
+bindm = SUPER SHIFT, ALT_L, resizewindowpixel
+
+# Environment Variables
+env=QT_QPA_PLATFORM,wayland;xcb,
+env=GDK_BACKEND,wayland,x11,
+env=SDL_VIDEODRIVER,wayland
+env=XDG_SESSION_TYPE,wayland
+env=XDG_SESSION_DESKTOP,Hyprland
+env=XDG_CURRENT_DESKTOP,Hyprland
+env=CLUTTER_BACKEND,wayland
+
+# Execs
+exec-once=hyprpaper
+exec-once=lxqt-policykit-agent
+exec-once=fcitx5 -d -r
+exec-once=fcitx5-remote -r
+exec-once=waybar
+
+# Window Rules
+windowrule=pseudo, fcitx
+windowrulev2=suppressevent maximize, class:.*
+
+# # Source other files (nwg-displays)
+source = ~/.config/hypr/monitors.conf
+source = ~/.config/hypr/workspaces.conf

configs/mako/config

@@ -0,0 +1,2 @@
+default-timeout=5000
+ignore-timeout=0

configs/setup.sh

@@ -1,5 +1,5 @@
 #!/usr/bin/env bash
- 
+
 # Settings
 USER_HOME="$HOME"
 USER_LOCAL="$USER_HOME/.local"
@@ -26,14 +26,14 @@ SSP_LINK_NAME="$ZSH_THEMES/spaceship.zsh-theme"
 SSP_LINK_TARGET="$SSP_DIR/spaceship.zsh-theme"
 
 # Setup Basic Dirs
-mkdir -p "$USER_HOME"
-mkdir -p "$USER_CONFIGS"
-mkdir -p "$DATA_LOC"
-mkdir -p "$APPDATA"
-mkdir -p "$CONFIGS"
-mkdir -p "$SCRIPTS"
-mkdir -p "$SOURCES"
-mkdir -p "$CACHE"
+mkdir -pv "$USER_HOME"
+mkdir -pv "$USER_CONFIGS"
+mkdir -pv "$DATA_LOC"
+mkdir -pv "$APPDATA"
+mkdir -pv "$CONFIGS"
+mkdir -pv "$SCRIPTS"
+mkdir -pv "$SOURCES"
+mkdir -pv "$CACHE"
 
 # Store the current working directory
 CWD="$(pwd -P)"
@@ -48,31 +48,34 @@ FILES_TO_LINK=(
 )
 
 # Make sure git, cmake, build-essential, zsh, tmux, and other items are installed.
-sudo apt install -y git cmake build-essential zsh tmux curl wget pkg-config libssl-dev || exit 1
+sudo pacman -Syu base base-devel git cmake zsh tmux curl wget pkg-config openssh openssl
+#sudo apt install -y git cmake build-essential zsh tmux curl wget pkg-config libssl-dev || exit 1
 
 # Check if system is WSL2, and install wslu if true
 if [ -f "/proc/sys/fs/binfmt_misc/WSLInterop" ]; then
   echo "WSL2 Detected. Installing wslu..."
-  sudo apt install -y wslu || exit 1
+#  sudo apt install -y wslu || exit 1
+   sudo pacman -S wslu
 fi
 
-# Ensure Node and NPM are set up. Use Latest LTS (22.x) 
-if ! [ -x "$(command -v npm)" ] || [ -x "$(command -v node)" ]; then
-  echo "Node/NPM not found. Installing from nodesource..."
-  curl -fsSL https://deb.nodesource.com/setup_lts.x -o nodesource_setup.sh || exit 1
-  sudo -E bash nodesource_setup.sh || exit 1
-  sudo apt install nodejs -y || exit 1
+# # Ensure Node and NPM are set up. Use Latest LTS (22.x)
+# if ! [ -x "$(command -v npm)" ] || [ -x "$(command -v node)" ]; then
+#   echo "Node/NPM not found. Installing from nodesource..."
+#   curl -fsSL https://deb.nodesource.com/setup_lts.x -o nodesource_setup.sh || exit 1
+#   sudo -E bash nodesource_setup.sh || exit 1
+#   sudo apt install nodejs -y || exit 1
 
-  if ! [ -x "$(command -v npm)" ] || ! [ -x "$(command -v node)" ]; then
-    echo "Node failed to install for some reason. Exiting."
-    exit 1
-  fi
+#   if ! [ -x "$(command -v npm)" ] || ! [ -x "$(command -v node)" ]; then
+#     echo "Node failed to install for some reason. Exiting."
+#     exit 1
+#   fi
 
-  rm nodesource_setup.sh || exit 1
-fi
+#   rm nodesource_setup.sh || exit 1
+# fi
 
-# Make sure rustup is setup
-curl --proto '=https' --tlsv1.2 -sSf https://sh.rustup.rs | sh -s -- -y || exit 1
+# # Make sure rustup is setup
+# curl --proto '=https' --tlsv1.2 -sSf https://sh.rustup.rs | sh -s -- -y || exit 1
+sudo pacman -S rustup
 
 # Source the new cargo environment
 source $USER_HOME/.cargo/env
@@ -82,9 +85,10 @@ rustup component add rust-analyzer || exit 1
 rustup component add rust-docs || exit 1
 
 # Ensure ncspot, dust, and ripgrep are available
-cargo install du-dust || exit 1
-cargo install ripgrep || exit 1
-cargo install ncspot || exit 1
+# cargo install du-dust || exit 1
+# cargo install ripgrep || exit 1
+# cargo install ncspot || exit 1
+sudo pacman -S dust ripgrep ncspot
 
 # Download and setup oh-my-zsh, assuming zsh is installed
 if [ -x "$(command -v zsh)" ]; then
@@ -111,26 +115,26 @@ if [ -x "$(command -v zsh)" ]; then
 fi
 
 # Download neovim source code and build to ensure we have the latest.
-if ! [ -x "$(command -v nvim)" ]; then
-  echo "Neovim not installed. Building..."
-  cd "$SOURCES"
-  git clone "https://github.com/neovim/neovim.git" || exit 1
-  cd "neovim" || exit 1
-  git checkout "v$NEOVIM_VERSION" || exit 1
+# if ! [ -x "$(command -v nvim)" ]; then
+#   echo "Neovim not installed. Building..."
+#   cd "$SOURCES"
+#   git clone "https://github.com/neovim/neovim.git" || exit 1
+#   cd "neovim" || exit 1
+#   git checkout "v$NEOVIM_VERSION" || exit 1
 
-  # Ensure Neovim Build Prereqs are installed
-  sudo apt install -y ninja-build gettext cmake unzip curl build-essential || exit 1
+#   # Ensure Neovim Build Prereqs are installed
+#   sudo apt install -y ninja-build gettext cmake unzip curl build-essential || exit 1
 
-  # Do the build
-  make CMAKE_BUILD_TYPE=RelWithDebInfo || exit 1
-  sudo make install || exit 1
+#   # Do the build
+#   make CMAKE_BUILD_TYPE=RelWithDebInfo || exit 1
+#   sudo make install || exit 1
 
-  # Setup my neovim config
-  cd "USER_HOME"
-  git clone "https://github.com/aargonian/nvim-config" "$CONFIGS/Neovim Config" || exit 1
-  ln -s "$CONFIGS/Neovim Config" "$USER_CONFIGS/nvim" || exit 1
-  cd "$CWD"
-fi
+#   # Setup my neovim config
+#   cd "USER_HOME"
+#   git clone "https://github.com/aargonian/nvim-config" "$CONFIGS/Neovim Config" || exit 1
+#   ln -s "$CONFIGS/Neovim Config" "$USER_CONFIGS/nvim" || exit 1
+#   cd "$CWD"
+# fi
 
 link_config() {
   local rel_cwd="$1"

configs/waybar/config

@@ -0,0 +1,195 @@
+[
+  {
+    "battery": {
+      "bat-compatibility": true,
+      "format": "{icon} {capacity}% ({time}) ({power:.2f}W)",
+      "format-alt": "{icon} Health: {health}% {power:.2f}W",
+      "format-charging": " {capacity}% ({time})",
+      "format-charging-full": " {capacity}%",
+      "format-full": "{icon} {capacity}%",
+      "format-icons": [
+        "  ",
+        "  ",
+        "  ",
+        "  ",
+        "  "
+      ],
+      "format-time": "{H}:{M:02}",
+      "interval": 2,
+      "states": {
+        "critical": 15,
+        "warning": 30
+      },
+      "tooltip": false
+    },
+    "clock#date": {
+      "format": "{:%e %b %Y}",
+      "interval": 20,
+      "tooltip": false
+    },
+    "clock#time": {
+      "format": "{:%H:%M:%S}",
+      "interval": 1,
+      "tooltip": false
+    },
+    "cpu": {
+      "format": "  {usage}%",
+      "format-alt": "  {load}",
+      "interval": 5,
+      "states": {
+        "critical": 90,
+        "warning": 70
+      },
+      "tooltip": false
+    },
+    "custom/arrow1": {
+      "format": "",
+      "tooltip": false
+    },
+    "custom/arrow10": {
+      "format": "",
+      "tooltip": false
+    },
+    "custom/arrow11": {
+      "format": "",
+      "tooltip": false
+    },
+    "custom/arrow2": {
+      "format": "",
+      "tooltip": false
+    },
+    "custom/arrow3": {
+      "format": "",
+      "tooltip": false
+    },
+    "custom/arrow4": {
+      "format": "",
+      "tooltip": false
+    },
+    "custom/arrow5": {
+      "format": "",
+      "tooltip": false
+    },
+    "custom/arrow6": {
+      "format": "",
+      "tooltip": false
+    },
+    "custom/arrow7": {
+      "format": "",
+      "tooltip": false
+    },
+    "custom/arrow8": {
+      "format": "",
+      "tooltip": false
+    },
+    "custom/arrow9": {
+      "format": "",
+      "tooltip": false
+    },
+    "disk": {
+      "format": "💾  {specific_used:0.1f} / {specific_total:0.1f}Gb ({percentage_used}%)",
+      "interval": 30,
+      "path": "/",
+      "unit": "GiB"
+    },
+    "height": 32,
+    "hyprland/workspaces": {
+      "active-only": true,
+      "all-outputs": false,
+      "format": "{name}",
+      "format-window-separator": "\n",
+      "move-to-monitor": true,
+      "show-special": true
+    },
+    "layer": "top",
+    "memory": {
+      "format": "🧠 {used:0.1f}G/{total:0.1f}G",
+      "interval": 5,
+      "states": {
+        "critical": 90,
+        "warning": 70
+      },
+      "tooltip": false
+    },
+    "modules-center": [],
+    "modules-left": [
+      "hyprland/workspaces",
+      "custom/arrow10",
+      "hyprland/window",
+      "custom/arrow11",
+      "hyprland/submap"
+    ],
+    "modules-right": [
+      "custom/arrow9",
+      "network",
+      "custom/arrow8",
+      "disk",
+      "custom/arrow7",
+      "memory",
+      "custom/arrow6",
+      "cpu",
+      "custom/arrow5",
+      "temperature",
+      "custom/arrow4",
+      "battery",
+      "custom/arrow3",
+      "pulseaudio",
+      "custom/arrow2",
+      "tray",
+      "clock#date",
+      "custom/arrow1",
+      "clock#time"
+    ],
+    "network": {
+      "format-alt": "  {ipaddr}/{cidr}",
+      "format-disconnected": "No connection",
+      "format-ethernet": "  {ifname}",
+      "format-wifi": "   {essid} ({signalStrength}% @ {frequency}Ghz) ({ifname}) (↓{bandwidthDownBits}/↑{bandwidthUpBits})",
+      "interval": 5,
+      "tooltip": false
+    },
+    "position": "bottom",
+    "pulseaudio": {
+      "format": "{icon} {volume}%",
+      "format-bluetooth": "{icon} {volume}%",
+      "format-icons": {
+        "car": "  ",
+        "default": [
+          "  ",
+          "  "
+        ],
+        "hands-free": "  ",
+        "headphone": "  ",
+        "headset": "  ",
+        "phone": "  ",
+        "portable": "  "
+      },
+      "format-muted": "  ",
+      "on-click": "pavucontrol",
+      "scroll-step": 1,
+      "tooltip": false
+    },
+    "sway/language": {
+      "format": "  {}",
+      "min-length": 5,
+      "on-click": "swaymsg 'input * xkb_switch_layout next'",
+      "tooltip": false
+    },
+    "temperature": {
+      "critical-threshold": 90,
+      "format": "{icon} {temperatureC}°",
+      "format-icons": [
+        "  ",
+        "  ",
+        "  ",
+        "  ",
+        "  "
+      ],
+      "interval": 5,
+      "tooltip": false
+    },
+    "tray": {
+      "icon-size": 18
+    }
+  }
+]

configs/waybar/style.css

@@ -0,0 +1,293 @@
+/* Keyframes */
+@keyframes blink-critical {
+    to {
+        /*color: @white;*/
+        background-color: @critical;
+    }
+}
+
+@keyframes blink-warning {
+    to {
+        /*color: @white;*/
+        background-color: @warning;
+    }
+}
+
+
+/* Styles */
+
+/* Colors (gruvbox) */
+@define-color black     #282828;
+@define-color red       #cc241d;
+@define-color green     #98971a;
+@define-color yellow    #d79921;
+@define-color orange    #FF7700;
+@define-color blue      #458588;
+@define-color purple    #301934;
+@define-color aqua      #689d6a;
+@define-color gray      #a89984;
+@define-color brgray    #706152;
+@define-color brred     #fb4934;
+@define-color brgreen   #b8bb26;
+@define-color bryellow  #fabd2f;
+@define-color brblue    #83a598;
+@define-color brpurple  #d3869b;
+@define-color braqua    #dec07c;
+@define-color white     #ebdbb2;
+@define-color bg2       #504945;
+
+
+@define-color warning   @orange;
+@define-color critical  @red;
+@define-color mode      @black;
+@define-color unfocused @bg2;
+@define-color focused   @braqua;
+@define-color active    @purple;
+@define-color sound     @brpurple;
+@define-color network   @purple;
+@define-color memory    @gray;
+@define-color cpu       @blue;
+@define-color temp      @brgreen;
+@define-color layout    @bryellow;
+@define-color battery   @yellow;
+@define-color date      @black;
+@define-color time      @white;
+@define-color disk      @brgray;
+
+/* Reset all styles */
+* {
+    border: none;
+    border-radius: 0;
+    min-height: 0;
+    margin: 0;
+    padding: 0;
+    box-shadow: none;
+    text-shadow: none;
+    icon-shadow: none;
+}
+
+/* The whole bar */
+#waybar {
+    background: rgba(40, 40, 40, 0.8784313725); /* #282828e0 */
+    color: @white;
+    font-family: JetBrains Mono, Siji;
+    font-size: 14pt;
+    /*font-weight: bold;*/
+}
+
+/* Each module */
+#battery,
+#clock,
+#cpu,
+#language,
+#memory,
+#mode,
+#network,
+#pulseaudio,
+#temperature,
+#tray,
+#backlight,
+#idle_inhibitor,
+#disk,
+#user,
+#mpris {
+    padding-left: 8pt;
+    padding-right: 8pt;
+}
+
+/* Each critical module */
+#mode,
+#memory.critical,
+#cpu.critical,
+#temperature.critical,
+#battery.critical
+{
+    animation-timing-function: linear;
+    animation-iteration-count: infinite;
+    animation-direction: alternate;
+    animation-name: blink-critical;
+    animation-duration: 1s;
+}
+
+/* Each warning */
+#network.disconnected,
+#memory.warning,
+#cpu.warning,
+#temperature.warning,
+#battery.warning {
+    animation-timing-function: linear;
+    animation-iteration-count: infinite;
+    animation-direction: alternate;
+    animation-name: blink-warning;
+    animation-duration: 5s;
+}
+
+/* And now modules themselves in their respective order */
+
+/* Current sway mode (resize etc) */
+#mode {
+    color: @white;
+    background: @mode;
+}
+
+/* Workspaces stuff */
+#workspaces button {
+    /*font-weight: bold;*/
+    padding-left: 2pt;
+    padding-right: 2pt;
+    color: @white;
+    background: @unfocused;
+}
+
+/* Inactive (on unfocused output) */
+#workspaces button.visible {
+    color: @white;
+    background: @active;
+}
+
+/* Active (on focused output) */
+#workspaces button.focused {
+    color: @black;
+    background: @focused;
+}
+
+/* Contains an urgent window */
+#workspaces button.urgent {
+    color: @black;
+    background: @warning;
+}
+
+/* Style when cursor is on the button */
+#workspaces button:hover {
+    background: @black;
+    color: @white;
+}
+
+#window {
+    color: @black;
+    background: @brblue;
+    /*
+    margin-right: 35pt;
+    margin-left: 35pt;
+    */
+}
+
+#pulseaudio {
+    background: @sound;
+    color: @black;
+}
+
+#network {
+    background: @network;
+    color: @white;
+}
+
+#disk {
+    background: @disk;
+    color: @white;
+}
+
+#memory {
+    background: @memory;
+    color: @black;
+}
+
+#cpu {
+    background: @cpu;
+    color: @white;
+}
+
+#temperature {
+    background: @temp;
+    color: @black;
+}
+
+#language {
+    background: @layout;
+    color: @black;
+}
+
+#battery {
+    background: @battery;
+    color: @black;
+}
+
+#tray {
+    background: @date;
+}
+
+#clock.date {
+    background: @date;
+    color: @white;
+}
+
+#clock.time {
+    background: @time;
+    color: @black;
+}
+
+#custom-arrow1 {
+    font-size: 20pt;
+    color: @time;
+    background: @date;
+}
+
+#custom-arrow2 {
+    font-size: 20pt;
+    color: @date;
+    background: @sound;
+}
+
+#custom-arrow3 {
+    font-size: 20pt;
+    color: @sound;
+    background: @battery;
+}
+
+#custom-arrow4 {
+    font-size: 20pt;
+    color: @battery;
+    background: @temp;
+}
+
+#custom-arrow5 {
+    font-size: 20pt;
+    color: @temp;
+    background: @cpu;
+}
+
+#custom-arrow6 {
+    font-size: 20pt;
+    color: @cpu;
+    background: @memory;
+}
+
+#custom-arrow7 {
+    font-size: 20pt;
+    color: @memory;
+    background: @disk;
+}
+
+#custom-arrow8 {
+    font-size: 20pt;
+    color: @disk;
+    background: @network;
+}
+
+#custom-arrow9 {
+    font-size: 20pt;
+    color: @network;
+    background: transparent;
+}
+
+#custom-arrow10 {
+    font-size: 20pt;
+    color: @active;
+    background: @brblue;
+}
+
+#custom-arrow11 {
+    font-size: 20pt;
+    color: @brblue;
+    background: @transparent;
+}

configs/zshrc

@@ -1,8 +1,14 @@
+# Useful variable definitions
 export LANG=en_US.UTF-8
 export EDITOR='nvim'
 export PATH=$HOME/bin:$HOME/.local/bin:/usr/local/bin:$PATH
 export ZSH="$HOME/.oh-my-zsh"
 
+# Personal Directories
+export CONFIG_DIR="$HOME/Config"
+export NVIM_DIR="$CONFIG_DIR/Neovim"
+export MANAGED_CONFIG_DIR="$CONFIG_DIR/Main/configs"
+
 ZSH_THEME="spaceship"
 CASE_SENSITIVE="true"
 plugins=(git)
@@ -17,27 +23,130 @@ alias backup='rsync -ahv --info=progress2 --no-i-r --partial'
 # Spaceship Settings
 SPACESHIP_PROMPT_ORDER=(
   time          # Time stamps
-  user          # Username section
   dir           # Current directory
   git           # Git branch
-  host          # Hostname section
   exec_time     # Execution time
+  rust
   line_sep      # Line break
   jobs          # Background jobs indicator
+  user          # Username section
+  host          # Hostname section
   exit_code     # Exit code section
   char          # Prompt character
 )
 
+# User and Hostname Config
+SPACESHIP_HOST_SHOW="always"
+SPACESHIP_HOST_PREFIX="@"
+SPACESHIP_USER_PREFIX=""
+SPACESHIP_USER_SUFFIX=""
+SPACESHIP_USER_SHOW="always"
+
+# Date and Time Config
 SPACESHIP_TIME_SHOW=true
 SPACESHIP_TIME_FORMAT='%D{%H:%M:%S.%.}'
+
+# Unknown
 SPACESHIP_DIR_TRUNC=0
 SPACESHIP_DIR_TRUNC_REPO=false
 
+# Git
+SPACESHIP_GIT_ORDER=(git_branch git_commit git_status)
+SPACESHIP_GIT_COMMIT_SHOW=true
+SPACESHIP_GIT_COMMIT_PREFIX=" at "
+
+# Rust Spaceship Config
+SPACESHIP_RUST_SHOW=true
+
 # Source Cargo Directory
 source $HOME/.cargo/env
 
 # Launch or attach to a Tmux session by default if not already in TMUX
-if command -v tmux &> /dev/null && [ -n "$PS1" ] && [[ ! "$TERM" =~ screen ]] && [[ ! "$TERM" =~ tmux ]] && [ -z "$TMUX" ]; then
-    # Try to attach to an existing tmux session; if none, create a new one
-    tmux attach || exec tmux
-fi
+# if command -v tmux &> /dev/null && [ -n "$PS1" ] && [[ ! "$TERM" =~ screen ]] && [[ ! "$TERM" =~ tmux ]] && [ -z "$TMUX" ]; then
+#     # Try to attach to an existing tmux session; if none, create a new one
+#     tmux attach || exec tmux
+# fi
+
+# Function to move and manage config directories as needed
+manage() {
+    if [ $# -ne 1 ]; then
+        echo "Usage: manage <config file or dir>"
+        return 1
+    fi
+
+    local src="$(realpath -s "$1")" # Don't resolve symlinks here. We need to check first.
+    local dst="$(realpath "$MANAGED_CONFIG_DIR")"
+    local src_name="$(basename "$src")"
+    local dst_path="$dst/$src_name"
+
+    # Ensure the given path is not a symlink
+    if [ -L "$src" ]; then
+        echo "$src is a symlink. Not managing."
+        return 1
+    fi
+
+    # Not a symlink. Re-resolve with actual path in case symlinks exist higher up the chain.
+    src="$(realpath $src)"
+
+    # Ensure the given path is not already managed
+    echo "Checking if $src is a child of $dst"
+    case "$src" in
+        "$dst"|"$dst"/*)
+        echo "Specified directory path is already being managed."
+        return 1
+        ;;
+    esac
+
+    mv -n "$src" "$dst_path" || {
+        echo "Failed to move $src to $dst"
+        return 1
+    }
+
+    ln -s "$dst_path" "$src" || {
+        echo "Failed to create symlink $src -> $dst"
+        return 1
+    }
+
+    local CWD="$(pwd)"
+
+    # Determine if we should commit this newly managed config.
+    if [ read -q "choice?Would you like to commit this directory? [n]: " ]; then
+        cd "$dst_path"
+        git add .
+        git commit -m "Begin managing $src_name config"
+        cd "$CWD"
+    else
+        echo
+        echo "Not commiting config to repo."
+    fi
+
+    # Determine if user would like to move to the config dir
+    if [ read -q "choice?Would you like to move to the config directory? [n]: " ]; then
+        if [ -d "$dst_path" ]; then
+            cd "$dst_path"
+        else
+            cd "$dst"
+        fi
+    else
+        echo "Not leaving current directory."
+    fi
+
+    return 0
+}
+
+# Add zoxide
+eval "$(zoxide init zsh)"
+
+# MACOS
+# zoxide setup
+#eval "$(zoxide init zsh)"
+#alias cd="z"
+#
+#alias download="yt-dlp -f bestvideo+bestaudio --merge-output-format mp4 --embed-thumbnail --embed-subs --write-auto-sub --sub-lang \"en.*\" --embed-chapters --embed-metadata --embed-info-json -o '%(timestamp>%Y%m%d - %H%M%S)s - %(id)s - %(uploader)s - %(title)s.%(ext)s'"
+#
+## Keep both x86_64 and arm64 Homebrew
+#if [ "$(arch)" = "arm64" ]; then
+#    eval "$(/opt/homebrew/bin/brew shellenv)"
+#else
+#    eval "$(/usr/local/bin/brew shellenv)"
+#fi

flake.lock

@@ -9,11 +9,11 @@
         "systems": "systems"
       },
       "locked": {
-        "lastModified": 1731092955,
-        "narHash": "sha256-L1hLXf4IDZ0KoXbFiSNNZJ7IrReEr/J+CLt6Rl4Ea3M=",
+        "lastModified": 1735301051,
+        "narHash": "sha256-jU88Q9tP4vuvWYGQcmOdFwI9e2uMPVYJHbXdiklIH9o=",
         "owner": "anyrun-org",
         "repo": "anyrun",
-        "rev": "d2017f224b2bfd7e33573c7070e7c3e2960c7dcc",
+        "rev": "06017e753c8886d5296768dca80745ee09402a2d",
         "type": "github"
       },
       "original": {
@@ -66,11 +66,11 @@
     },
     "nixos-hardware": {
       "locked": {
-        "lastModified": 1734954597,
-        "narHash": "sha256-QIhd8/0x30gEv8XEE1iAnrdMlKuQ0EzthfDR7Hwl+fk=",
+        "lastModified": 1737751639,
+        "narHash": "sha256-ZEbOJ9iT72iwqXsiEMbEa8wWjyFvRA9Ugx8utmYbpz4=",
         "owner": "NixOS",
         "repo": "nixos-hardware",
-        "rev": "def1d472c832d77885f174089b0d34854b007198",
+        "rev": "dfad538f751a5aa5d4436d9781ab27a6128ec9d4",
         "type": "github"
       },
       "original": {
@@ -82,11 +82,11 @@
     },
     "nixpkgs": {
       "locked": {
-        "lastModified": 1734835170,
-        "narHash": "sha256-JG6n9tQET7ZLjvwjH9BdYE6pES/Alcduxv2FDXliuBM=",
+        "lastModified": 1735563628,
+        "narHash": "sha256-OnSAY7XDSx7CtDoqNh8jwVwh4xNL/2HaJxGjryLWzX8=",
         "owner": "NixOS",
         "repo": "nixpkgs",
-        "rev": "6df924734e1b626efd70925545de844b1c25246f",
+        "rev": "b134951a4c9f3c995fd7be05f3243f8ecd65d798",
         "type": "github"
       },
       "original": {
@@ -97,11 +97,11 @@
     },
     "nixpkgs-unstable": {
       "locked": {
-        "lastModified": 1734649271,
-        "narHash": "sha256-4EVBRhOjMDuGtMaofAIqzJbg4Ql7Ai0PSeuVZTHjyKQ=",
+        "lastModified": 1738142207,
+        "narHash": "sha256-NGqpVVxNAHwIicXpgaVqJEJWeyqzoQJ9oc8lnK9+WC4=",
         "owner": "NixOS",
         "repo": "nixpkgs",
-        "rev": "d70bd19e0a38ad4790d3913bf08fcbfc9eeca507",
+        "rev": "9d3ae807ebd2981d593cddd0080856873139aa40",
         "type": "github"
       },
       "original": {

hosts/x86_64-linux/framework/default.nix

@@ -10,12 +10,12 @@ let
 
       fileSystems = {
         "/" = {
-          device = "/dev/disk/by-label/ROOT_SYS";
+          device = "/dev/disk/by-label/NixRoot";
           fsType = "btrfs";
         };
 
         "/boot" = {
-	  device = "/dev/disk/by-uuid/2AFA-3BFC";
+          device = "/dev/disk/by-label/BootRoot";
           fsType = "vfat";
           options = [ "fmask=0022" "dmask=0022" ];
         };
@@ -32,8 +32,8 @@ let
           options = [ "nofail,noatime,uid=1000,gid=100,fmask=0022,dmask=0022" ];
         };
 
-        "/data/Portable/Linux" = {
-          device = "/dev/disk/by-label/LinuxPortable";
+        "/data/LinuxData" = {
+          device = "/dev/disk/by-label/LinuxData";
           fsType = "btrfs";
           options = [ "nofail,noatime,autodefrag" ];
         };

modules/old.nix

@@ -1,9 +0,0 @@
-{ ...}:
-{
-  imports = [
-   ./programs
-    ./servers
-   ./services
-   ./system
-  ];
-}

modules/programs/development/rust.nix

@@ -4,10 +4,7 @@
 
   config = mkIf config.custom.programs.development.rust.all {
     environment.systemPackages = with pkgs; [
-      cargo
-      #      rustc
       rustup
-      ripgrep
     ];
 
     # TODO: Make a nix shell to solve this issue

modules/programs/messaging/default.nix

@@ -13,6 +13,8 @@
 
     custom.programs = {
       thunderbird.enable = true;
+      hexchat.enable = true;
+      discord.enable = true;
     };
   };
 }

modules/programs/other/default.nix

@@ -4,6 +4,7 @@
     ./anyrun
     ./waybar
 
+    ./foliate.nix
     ./liferea.nix
     ./transmission.nix
   ];
@@ -14,6 +15,7 @@
     custom.programs = {
       transmission.enable = true;
       liferea.enable = true;
+      foliate.enable = true;
     };
   };
 }

modules/programs/other/foliate.nix

@@ -0,0 +1,13 @@
+{ lib, config, pkgs, ... }:
+{
+  # An Ebook Reader that is actually very nice...
+  options.custom.programs.foliate.enable = lib.mkEnableOption "Foliate Ebook Reader";
+
+  config = lib.mkIf config.custom.programs.foliate.enable {
+    home-manager.users.${config.custom.username} = {
+      home.packages = with pkgs; [
+        foliate
+      ];
+    };
+  };
+}

modules/programs/utility/common.nix

@@ -8,7 +8,6 @@ let
     zip
     unzip
     lsof
-    tmux
     epubcheck
   ];
 

modules/programs/utility/default.nix

@@ -7,6 +7,7 @@
     ./printing.nix
     ./thunar.nix
     ./tigervnc.nix
+    ./tmux.nix
     ./touchpad.nix
     ./via.nix
   ];
@@ -24,6 +25,7 @@
       printing.enable = true;
       thunar.enable = true;
       tigervnc.enable = true;
+      tmux.enable = true;
       touchpad.enable = true;
       via.enable = true;
     };

modules/programs/utility/tmux.nix

@@ -0,0 +1,102 @@
+{ lib, config, ... }: with lib;
+{
+  options.custom.programs.tmux.enable = mkEnableOption "tmux terminal multiplexer";
+
+  config = mkIf config.custom.programs.tmux.enable {
+    home-manager.users.${config.custom.username} = {
+
+      programs.tmux = {
+        enable = true;
+        extraConfig = ''
+          # Enable reloading via hotkey
+          unbind r
+          bind r source-file ~/.tmux.conf
+
+          # Change our prefix to something easier
+          set -g prefix C-Space
+          unbind C-b
+          bind C-Space send-prefix
+
+          # Enable the Mouse
+          set -g mouse on
+
+          # More Sane Pane Splitting
+          bind | split-window -h
+          bind - split-window -v
+          unbind '"'
+          unbind %
+
+          # Use VIM Keybinds
+          setw -g mode-keys vi
+          bind-key h select-pane -L
+          bind-key j select-pane -D
+          bind-key k select-pane -U
+          bind-key l select-pane -R
+
+          # Window Commands
+          unbind o
+          unbind c
+          bind-key o new-window
+
+          # bind-key c kill-window
+          bind-key c if-shell -F '#{==:#{session_windows},1}' \
+            'display-message "This is the last window, cannot close it."' \
+            'kill-window'
+
+          # Window Renaming
+          set-option -g allow-rename off
+
+          # DESIGN TWEAKS
+
+          # don't do anything when a 'bell' rings
+          set -g visual-activity off
+          set -g visual-bell off
+          set -g visual-silence off
+          setw -g monitor-activity off
+          set -g bell-action none
+
+          # Colors
+          set -g default-terminal "xterm-256color"
+          set-option -ga terminal-overrides ",xterm-256color:Tc"
+          set-option -sa terminal-features ',xterm-256color:RGB'
+
+          # clock mode
+          setw -g clock-mode-colour colour226
+
+          # copy mode
+          setw -g mode-style 'fg=colour0 bg=red bold'
+
+          # panes
+          set -g pane-border-style 'fg=red'
+          set -g pane-active-border-style 'fg=colour226'
+
+          # statusbar
+          set -g status-position top
+          set -g status-justify left
+          set -g status-style 'fg=red bg=colour22'
+
+
+          # Show hostname in top-left
+          set -g status-left-style 'fg=colour226 bg=colour0'
+          set -g status-left ' #(hostname) '
+          set -g status-left-length 30
+
+          set -g status-right-style 'fg=colour0 bg=colour226'
+          set -g status-right '%Y-%m-%d %H:%M '
+          set -g status-right-length 50
+
+          # Tab Styles
+          setw -g window-status-current-style 'fg=colour231 bg=blue'
+          setw -g window-status-current-format ' #I #W #F '
+          setw -g window-status-style 'fg=white bg=colour0'
+          setw -g window-status-format ' #I #[fg=white]#W #[fg=colour226]#F '
+          setw -g window-status-bell-style 'fg=colour226 bg=red bold'
+
+          # messages
+          set -g message-style 'fg=colour226 bg=red bold'
+        '';
+      };
+
+    };
+  };
+}

modules/programs/utility/touchpad.nix

@@ -1,4 +1,4 @@
-{ lib, config, pkgs, ... }: with lib;
+{ lib, config, ... }: with lib;
 {
   options.custom.programs.touchpad.enable = mkEnableOption "Touchpad drivers from libinput";
 

modules/system/display/windowManagers/hyprland/default.nix

@@ -25,6 +25,7 @@
         wl-clipboard
         wl-screenrec
         wlr-randr
+        wev           # Input Event Reader (Determine what keyboard scancodes are etc.)
 
         # We need a polkit agent
         lxqt.lxqt-policykit
@@ -43,7 +44,7 @@
         enable = true;
         xwayland.enable = true;
         settings = {
-          "$mod" = "Mod4";
+          "$mod" = "Mod1";
 
           debug = {
             disable_logs = false;
@@ -96,6 +97,7 @@
             shadow_render_power = 3;
             "col.shadow" = "rgba(1a1a1aee)";
           };
+
           animations = {
             enabled = "yes";
 
@@ -112,34 +114,46 @@
               "workspaces, 1, 6, default"
             ];
           };
+
           dwindle = {
               # See https://wiki.hyprland.org/Configuring/Dwindle-Layout/ for more
               # master switch for pseudotiling. Enabling is bound to mod + P in the keybinds section below
               pseudotile = "yes";
               preserve_split = "yes"; # you probably want this
           };
+
           master = {
-              # See https://wiki.hyprland.org/Configuring/Master-Layout/ for more
               new_on_active= "after";
+              mfact = "0.50";
+
+              # New Windows become sub-windows, first window is master
+              new_status = "slave";
+
+              # Put the master window in the center
+              orientation = "center";
           };
+
           gestures = {
               # See https://wiki.hyprland.org/Configuring/Variables/ for more
               workspace_swipe = true;
               workspace_swipe_fingers = 4;
           };
+
           misc = {
               # See https://wiki.hyprland.org/Configuring/Variables/ for more
               force_default_wallpaper = -1; # Set to 0 or 1 to disable the anime mascot wallpapers
           };
+
           windowrule = [
             "pseudo, fcitx"
           ];
+
           windowrulev2 = [
             "suppressevent maximize, class:.*" # You'll probably like this.
             #"opacity 0.95 0.50, title:(.*)$"
           ];
 
-      # Making things not break in Wayland
+          # Making things not break in Wayland
           env = [
             "QT_QPA_PLATFORM,wayland;xcb,"
             "GDK_BACKEND,wayland,x11,"
@@ -150,6 +164,12 @@
             "CLUTTER_BACKEND,wayland"
           ];
 
+          bindm = [
+            # Move with LMB, Resize with RMB
+            "$mod, mouse:272, movewindow"
+            "$mod, mouse:273, resizewindowpixel"
+          ];
+
           bind = [
             "$mod, p, exec, anyrun"
             "$mod, Return, exec, xfce4-terminal"
@@ -163,10 +183,6 @@
             "$mod SHIFT, t, pseudo,"
             "$mod, V, togglesplit,"
 
-            # Move with LMB, Resize with RMB
-            "$mod, mouse:272, movewindow"
-            "$mod, mouse:273, resizewindowpixel"
-
             # Move window with Keyboard
             "$mod SHIFT, h, movewindow, l"
             "$mod SHIFT, j, movewindow, d"

modules/system/shell/default.nix

@@ -1,4 +1,4 @@
-{ lib, config, pkgs, ... }: with lib;
+{ lib, pkgs, ... }: with lib;
 {
   options.custom.system.shell = {
     package = mkOption {
@@ -8,7 +8,4 @@
       description = "Choose a preferred shell program";
     };
   };
-
-  config = {
-  };
 }

profiles/aargonian/default.nix

@@ -1,4 +1,4 @@
-{ lib, config, pkgs, hostname, options, ... }:
+{ lib, config, pkgs, hostname, ... }:
 let
   username = "aargonian";
 in
@@ -40,6 +40,7 @@ in
         display.enable = true;
         display.desktopManagers.cinnamon.enable = true;
         display.windowManagers.i3.enable = true;
+        display.windowManagers.hyprland.enable = true;
 
         # Enable Virtualbox
         virtualization.virtualbox.host = true;
@@ -50,7 +51,7 @@ in
       ####################################################################
       services = {
         avahi.enable = true;
-        greetd.enable = true;
+        greetd.enable = false;
         lact.enable = false;
         power-profiles-daemon.enable = true;
       };