mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2026-08-28 04:03:23 -04:00
Pull arm64 updates from Will Deacon:
"There's a reasonable amount of stuff here, including a bunch of
updates to the perf PMU drivers and some MPAM updates to expose the
memory bandwidth counters via resctrl.
On the architecture side, some highlights include support for BBML3
and steps towards support for an architectural NMI solution, all
wrapped up in a web of fixes for latent issues identified by Sashiko.
ACPI:
- Combine reads of AMU counters into a single FFH feedback counter op
Confidential computing:
- Fix smp_processor_id() in preemptible context when retrieving an
attestation token inside a realm
- Convert pKVM over to a "CC platform"
- Clean-up our SWIOTLB configuration in preparation for reworking the
handling of encrypted/decryped DMA buffers in the dma-mapping tree
CPU errata handling:
- Work around broken device memory ordering on NVIDIA Olympus cores
- Fix broken 'nospectre_bhb' command-line option
- Select the idle loop backend instruction on the command-line
CPU features:
- Replace our BBML2-noabort feature with the new architectural BBML3
feature
- Disable in-kernel BTI for recent versions of Clang due to issues
with livepatch that are still being investigated
- Clean-up documentation describing which ID register fields are
exposed to userspace
Interrupts:
- Preliminary work towards supporting FEAT_NMI, which cleans up our
IRQ entry code and fixes some latent issues with pseudo-NMI
- Support for an SDEI backend to trigger an NMI backtrace
Memory management:
- Treat all devices as coherent when CLIDR_EL1.LoC == 0
- Fix no-map handling of sub-page-sized regions
- Second attempt at unmapping the linear aliases of the kernel data
and bss sections
- Fix EFI runtime calls when software-PAN is enabled
Miscellaneous:
- Add Mark Rutland as a reviewer!
- Tidy-up our futex cmpxchg logic when using the new LSUI
instructions
- Drop the requirement on DYNAMIC_FTRACE_WITH_CALL_OPS when
selecting HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
- Fix a false-positive KCSCAN splat in the delay loop
- Use a portable typedef for 128-bit scalar types in our UAPI headers
- Non-critical fixes for Sashiko reports all over
MPAM:
- Hook MPAM memory bandwidth counters into resctrl's counter
assignment interface
- Fix a quirk in the MPAM bandwidth counting on Nvidia T241 so that
it also applies to 63 bit counters
Perf:
- Workarounds for hardware issues in the CMN-S3 PMU (Graviton 5) and
CPU PMU (NVIDIA Olympus again!)
- Add support for the DDR PMU on Marvell CN20K SoCs
- Add support for Picoheart implementations of the DCW PCIe PMU
- Add support for Channel/Rank/Bank filtering in the CXL PMU driver
- Add support for 64-bit counters in the CSPMU device
- Add support for revision 2 of the CMN S3 PMU
Ptrace:
- Fix a decade-old bug in our handling of seccomp and tracing on
syscall entry
- Fix regset handling for inactive SVE and SSVE registers
Selftests
- Add some tests for the decade-old bug that we just tried to fix in
our syscall entry path
- Fix SVE test crash on SME-only CPUs"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (95 commits)
arm64/efi: Avoid voluntary preemption with efi_mm installed
arm64: bti: Disable in-kernel BTI with recent versions of Clang
arm64: entry: Avoid unnecessary local_irq_disable() on kernel exit
irqchip/gic-v3: make the unmasking of pseudo-NMIs explicit when handling IRQs
arm64: Disable KCSAN instrumentation in delay.o
arm_mpam: Disable driver unbind to avoid UAF
arm_mpam: Fix a NULL pointer dereference on unbinding after an error interrupt
perf: arm_pmuv3: Zero initialize hw_id branch stack field
arm64: mm: Unmap kernel data/bss entirely from the linear map
iommu/arm-smmu-v3-sva: Use system_supports_bbml3() to detect CPU feature
perf/arm-cmn: Support CMN S3 r2
perf/arm-cmn: Plumb in new filter types
perf/arm-cmn: Refactor event filter data
perf/arm-cmn: Refactor event filter programming
perf/arm-cmn: Rename filter variables for clarity
arm64: mm: fix accidental linear mapping of no-map reserved memory
tools: Ensure tools copy of linux/filter.h exports the UAPI
kselftest/arm64: Fix abi test compilation errors
arch: arm64: add early_param idle=<wfi|yield|nop>
arm64: entry: mask DAIF before returning from C EL1 handlers
...
2400 lines
69 KiB
C
2400 lines
69 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* CPPC (Collaborative Processor Performance Control) methods used by CPUfreq drivers.
|
|
*
|
|
* (C) Copyright 2014, 2015 Linaro Ltd.
|
|
* Author: Ashwin Chaugule <ashwin.chaugule@linaro.org>
|
|
*
|
|
* CPPC describes a few methods for controlling CPU performance using
|
|
* information from a per CPU table called CPC. This table is described in
|
|
* the ACPI v5.0+ specification. The table consists of a list of
|
|
* registers which may be memory mapped or hardware registers and also may
|
|
* include some static integer values.
|
|
*
|
|
* CPU performance is on an abstract continuous scale as against a discretized
|
|
* P-state scale which is tied to CPU frequency only. In brief, the basic
|
|
* operation involves:
|
|
*
|
|
* - OS makes a CPU performance request. (Can provide min and max bounds)
|
|
*
|
|
* - Platform (such as BMC) is free to optimize request within requested bounds
|
|
* depending on power/thermal budgets etc.
|
|
*
|
|
* - Platform conveys its decision back to OS
|
|
*
|
|
* The communication between OS and platform occurs through another medium
|
|
* called (PCC) Platform Communication Channel. This is a generic mailbox like
|
|
* mechanism which includes doorbell semantics to indicate register updates.
|
|
* See drivers/mailbox/pcc.c for details on PCC.
|
|
*
|
|
* Finer details about the PCC and CPPC spec are available in the ACPI v5.1 and
|
|
* above specifications.
|
|
*/
|
|
|
|
#define pr_fmt(fmt) "ACPI CPPC: " fmt
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/iopoll.h>
|
|
#include <linux/ktime.h>
|
|
#include <linux/rwsem.h>
|
|
#include <linux/wait.h>
|
|
#include <linux/topology.h>
|
|
#include <linux/dmi.h>
|
|
#include <linux/units.h>
|
|
#include <linux/unaligned.h>
|
|
|
|
#include <acpi/cppc_acpi.h>
|
|
|
|
struct cppc_pcc_data {
|
|
struct pcc_mbox_chan *pcc_channel;
|
|
bool pcc_channel_acquired;
|
|
unsigned int deadline_us;
|
|
unsigned int pcc_mpar, pcc_mrtt, pcc_nominal;
|
|
|
|
bool pending_pcc_write_cmd; /* Any pending/batched PCC write cmds? */
|
|
bool platform_owns_pcc; /* Ownership of PCC subspace */
|
|
unsigned int pcc_write_cnt; /* Running count of PCC write commands */
|
|
|
|
/*
|
|
* Lock to provide controlled access to the PCC channel.
|
|
*
|
|
* For performance critical usecases(currently cppc_set_perf)
|
|
* We need to take read_lock and check if channel belongs to OSPM
|
|
* before reading or writing to PCC subspace
|
|
* We need to take write_lock before transferring the channel
|
|
* ownership to the platform via a Doorbell
|
|
* This allows us to batch a number of CPPC requests if they happen
|
|
* to originate in about the same time
|
|
*
|
|
* For non-performance critical usecases(init)
|
|
* Take write_lock for all purposes which gives exclusive access
|
|
*/
|
|
struct rw_semaphore pcc_lock;
|
|
|
|
/* Wait queue for CPUs whose requests were batched */
|
|
wait_queue_head_t pcc_write_wait_q;
|
|
ktime_t last_cmd_cmpl_time;
|
|
ktime_t last_mpar_reset;
|
|
int mpar_count;
|
|
int refcount;
|
|
};
|
|
|
|
/* Array to represent the PCC channel per subspace ID */
|
|
static struct cppc_pcc_data *pcc_data[MAX_PCC_SUBSPACES];
|
|
/* The cpu_pcc_subspace_idx contains per CPU subspace ID */
|
|
static DEFINE_PER_CPU(int, cpu_pcc_subspace_idx);
|
|
|
|
/*
|
|
* The cpc_desc structure contains the ACPI register details
|
|
* as described in the per CPU _CPC tables. The details
|
|
* include the type of register (e.g. PCC, System IO, FFH etc.)
|
|
* and destination addresses which lets us READ/WRITE CPU performance
|
|
* information using the appropriate I/O methods.
|
|
*/
|
|
static DEFINE_PER_CPU(struct cpc_desc *, cpc_desc_ptr);
|
|
|
|
/* pcc mapped address + header size + offset within PCC subspace */
|
|
#define GET_PCC_VADDR(offs, pcc_ss_id) (pcc_data[pcc_ss_id]->pcc_channel->shmem + \
|
|
0x8 + (offs))
|
|
|
|
/* Check if a CPC register is in PCC */
|
|
#define CPC_IN_PCC(cpc) ((cpc)->type == ACPI_TYPE_BUFFER && \
|
|
(cpc)->cpc_entry.reg.space_id == \
|
|
ACPI_ADR_SPACE_PLATFORM_COMM)
|
|
|
|
/* Check if a CPC register is in FFH */
|
|
#define CPC_IN_FFH(cpc) ((cpc)->type == ACPI_TYPE_BUFFER && \
|
|
(cpc)->cpc_entry.reg.space_id == \
|
|
ACPI_ADR_SPACE_FIXED_HARDWARE)
|
|
|
|
/* Check if a CPC register is in SystemMemory */
|
|
#define CPC_IN_SYSTEM_MEMORY(cpc) ((cpc)->type == ACPI_TYPE_BUFFER && \
|
|
(cpc)->cpc_entry.reg.space_id == \
|
|
ACPI_ADR_SPACE_SYSTEM_MEMORY)
|
|
|
|
/* Check if a CPC register is in SystemIo */
|
|
#define CPC_IN_SYSTEM_IO(cpc) ((cpc)->type == ACPI_TYPE_BUFFER && \
|
|
(cpc)->cpc_entry.reg.space_id == \
|
|
ACPI_ADR_SPACE_SYSTEM_IO)
|
|
|
|
/* Evaluates to True if reg is a NULL register descriptor */
|
|
#define IS_NULL_REG(reg) ((reg)->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY && \
|
|
(reg)->address == 0 && \
|
|
(reg)->bit_width == 0 && \
|
|
(reg)->bit_offset == 0 && \
|
|
(reg)->access_width == 0)
|
|
|
|
/* Evaluates to True if an optional cpc field is supported */
|
|
#define CPC_SUPPORTED(cpc) ((cpc)->type == ACPI_TYPE_INTEGER ? \
|
|
!!(cpc)->cpc_entry.int_value : \
|
|
!IS_NULL_REG(&(cpc)->cpc_entry.reg))
|
|
|
|
/*
|
|
* Each bit indicates the optionality of the register in per-cpu
|
|
* cpc_regs[] with the corresponding index. 0 means mandatory and 1
|
|
* means optional.
|
|
*/
|
|
#define REG_OPTIONAL (0x7FC7D0)
|
|
|
|
/*
|
|
* Use the index of the register in per-cpu cpc_regs[] to check if
|
|
* it's an optional one.
|
|
*/
|
|
#define IS_OPTIONAL_CPC_REG(reg_idx) (REG_OPTIONAL & (1U << (reg_idx)))
|
|
|
|
/*
|
|
* Arbitrary Retries in case the remote processor is slow to respond
|
|
* to PCC commands. Keeping it high enough to cover emulators where
|
|
* the processors run painfully slow.
|
|
*/
|
|
#define NUM_RETRIES 500ULL
|
|
|
|
#define OVER_16BTS_MASK ~0xFFFFULL
|
|
|
|
#define define_one_cppc_ro(_name) \
|
|
static struct kobj_attribute _name = \
|
|
__ATTR(_name, 0444, show_##_name, NULL)
|
|
|
|
#define to_cpc_desc(a) container_of(a, struct cpc_desc, kobj)
|
|
|
|
#define show_cppc_data(access_fn, struct_name, member_name) \
|
|
static ssize_t show_##member_name(struct kobject *kobj, \
|
|
struct kobj_attribute *attr, char *buf) \
|
|
{ \
|
|
struct cpc_desc *cpc_ptr = to_cpc_desc(kobj); \
|
|
struct struct_name st_name = {0}; \
|
|
int ret; \
|
|
\
|
|
ret = access_fn(cpc_ptr->cpu_id, &st_name); \
|
|
if (ret) \
|
|
return ret; \
|
|
\
|
|
return sysfs_emit(buf, "%llu\n", \
|
|
(u64)st_name.member_name); \
|
|
} \
|
|
define_one_cppc_ro(member_name)
|
|
|
|
show_cppc_data(cppc_get_perf_caps, cppc_perf_caps, highest_perf);
|
|
show_cppc_data(cppc_get_perf_caps, cppc_perf_caps, lowest_perf);
|
|
show_cppc_data(cppc_get_perf_caps, cppc_perf_caps, nominal_perf);
|
|
show_cppc_data(cppc_get_perf_caps, cppc_perf_caps, reference_perf);
|
|
show_cppc_data(cppc_get_perf_caps, cppc_perf_caps, lowest_nonlinear_perf);
|
|
show_cppc_data(cppc_get_perf_caps, cppc_perf_caps, guaranteed_perf);
|
|
show_cppc_data(cppc_get_perf_caps, cppc_perf_caps, lowest_freq);
|
|
show_cppc_data(cppc_get_perf_caps, cppc_perf_caps, nominal_freq);
|
|
|
|
show_cppc_data(cppc_get_perf_ctrs, cppc_perf_fb_ctrs, wraparound_time);
|
|
|
|
/*
|
|
* PCC reuses the access_width field as the subspace id, so only decode access
|
|
* size for non-PCC registers. Otherwise, use the bit_width.
|
|
*/
|
|
#define GET_BIT_WIDTH(reg) (((reg)->access_width && \
|
|
(reg)->space_id != ACPI_ADR_SPACE_PLATFORM_COMM) ? \
|
|
(8 << ((reg)->access_width - 1)) : (reg)->bit_width)
|
|
|
|
/* Shift and apply the mask for CPC reads/writes */
|
|
#define MASK_VAL_READ(reg, val) (((val) >> (reg)->bit_offset) & \
|
|
GENMASK(((reg)->bit_width) - 1, 0))
|
|
#define MASK_VAL_WRITE(reg, prev_val, val) \
|
|
((((val) & GENMASK(((reg)->bit_width) - 1, 0)) << (reg)->bit_offset) | \
|
|
((prev_val) & ~(GENMASK(((reg)->bit_width) - 1, 0) << (reg)->bit_offset))) \
|
|
|
|
static u64 cpc_sysmem_access_size(const struct cpc_register_resource *reg)
|
|
{
|
|
const struct cpc_reg *gas = ®->cpc_entry.reg;
|
|
unsigned int width;
|
|
|
|
if (gas->access_width > 4)
|
|
return 0;
|
|
|
|
width = GET_BIT_WIDTH(gas);
|
|
|
|
if (width != 8 && width != 16 && width != 32 && width != 64)
|
|
return 0;
|
|
|
|
return width / 8;
|
|
}
|
|
|
|
static bool cpc_sysmem_access_units_overlap(const struct cpc_register_resource *a,
|
|
const struct cpc_register_resource *b)
|
|
{
|
|
const struct cpc_reg *a_gas = &a->cpc_entry.reg;
|
|
const struct cpc_reg *b_gas = &b->cpc_entry.reg;
|
|
u64 a_size = cpc_sysmem_access_size(a);
|
|
u64 b_size = cpc_sysmem_access_size(b);
|
|
|
|
/* Keep the conservative locking path for malformed access widths. */
|
|
if (!a_size || !b_size)
|
|
return true;
|
|
|
|
if (a_gas->address < b_gas->address)
|
|
return b_gas->address - a_gas->address < a_size;
|
|
|
|
return a_gas->address - b_gas->address < b_size;
|
|
}
|
|
|
|
static void cpc_mark_rmw_lock_users(struct cpc_desc *cpc_desc)
|
|
{
|
|
int i, j;
|
|
|
|
for (i = 0; i < cpc_desc->num_entries - 2; i++) {
|
|
struct cpc_register_resource *a = &cpc_desc->cpc_regs[i];
|
|
struct cpc_reg *gas;
|
|
u64 access_size;
|
|
|
|
if (!CPC_SUPPORTED(a) || !CPC_IN_SYSTEM_MEMORY(a))
|
|
continue;
|
|
|
|
gas = &a->cpc_entry.reg;
|
|
access_size = cpc_sysmem_access_size(a);
|
|
if (gas->bit_offset || !access_size ||
|
|
gas->bit_width != access_size * 8)
|
|
a->cpc_entry.use_rmw_lock = true;
|
|
|
|
for (j = i + 1; j < cpc_desc->num_entries - 2; j++) {
|
|
struct cpc_register_resource *b = &cpc_desc->cpc_regs[j];
|
|
|
|
if (!CPC_SUPPORTED(b) || !CPC_IN_SYSTEM_MEMORY(b))
|
|
continue;
|
|
if (!cpc_sysmem_access_units_overlap(a, b))
|
|
continue;
|
|
|
|
a->cpc_entry.use_rmw_lock = true;
|
|
b->cpc_entry.use_rmw_lock = true;
|
|
}
|
|
}
|
|
}
|
|
|
|
static ssize_t show_feedback_ctrs(struct kobject *kobj,
|
|
struct kobj_attribute *attr, char *buf)
|
|
{
|
|
struct cpc_desc *cpc_ptr = to_cpc_desc(kobj);
|
|
struct cppc_perf_fb_ctrs fb_ctrs = {0};
|
|
int ret;
|
|
|
|
ret = cppc_get_perf_ctrs(cpc_ptr->cpu_id, &fb_ctrs);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return sysfs_emit(buf, "ref:%llu del:%llu\n",
|
|
fb_ctrs.reference, fb_ctrs.delivered);
|
|
}
|
|
define_one_cppc_ro(feedback_ctrs);
|
|
|
|
static struct attribute *cppc_attrs[] = {
|
|
&feedback_ctrs.attr,
|
|
&reference_perf.attr,
|
|
&wraparound_time.attr,
|
|
&highest_perf.attr,
|
|
&lowest_perf.attr,
|
|
&lowest_nonlinear_perf.attr,
|
|
&guaranteed_perf.attr,
|
|
&nominal_perf.attr,
|
|
&nominal_freq.attr,
|
|
&lowest_freq.attr,
|
|
NULL
|
|
};
|
|
ATTRIBUTE_GROUPS(cppc);
|
|
|
|
static const struct kobj_type cppc_ktype = {
|
|
.sysfs_ops = &kobj_sysfs_ops,
|
|
.default_groups = cppc_groups,
|
|
};
|
|
|
|
static int check_pcc_chan(int pcc_ss_id, bool chk_err_bit)
|
|
{
|
|
int ret, status;
|
|
struct cppc_pcc_data *pcc_ss_data = pcc_data[pcc_ss_id];
|
|
struct acpi_pcct_shared_memory __iomem *generic_comm_base =
|
|
pcc_ss_data->pcc_channel->shmem;
|
|
|
|
if (!pcc_ss_data->platform_owns_pcc)
|
|
return 0;
|
|
|
|
/*
|
|
* Poll PCC status register every 3us(delay_us) for maximum of
|
|
* deadline_us(timeout_us) until PCC command complete bit is set(cond)
|
|
*/
|
|
ret = readw_relaxed_poll_timeout(&generic_comm_base->status, status,
|
|
status & PCC_CMD_COMPLETE_MASK, 3,
|
|
pcc_ss_data->deadline_us);
|
|
|
|
if (likely(!ret)) {
|
|
pcc_ss_data->platform_owns_pcc = false;
|
|
if (chk_err_bit && (status & PCC_ERROR_MASK))
|
|
ret = -EIO;
|
|
}
|
|
|
|
if (unlikely(ret))
|
|
pr_err("PCC check channel failed for ss: %d. ret=%d\n",
|
|
pcc_ss_id, ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* This function transfers the ownership of the PCC to the platform
|
|
* So it must be called while holding write_lock(pcc_lock)
|
|
*/
|
|
static int send_pcc_cmd(int pcc_ss_id, u16 cmd)
|
|
{
|
|
int ret = -EIO, i;
|
|
struct cppc_pcc_data *pcc_ss_data = pcc_data[pcc_ss_id];
|
|
struct acpi_pcct_shared_memory __iomem *generic_comm_base =
|
|
pcc_ss_data->pcc_channel->shmem;
|
|
unsigned int time_delta;
|
|
|
|
/*
|
|
* For CMD_WRITE we know for a fact the caller should have checked
|
|
* the channel before writing to PCC space
|
|
*/
|
|
if (cmd == CMD_READ) {
|
|
/*
|
|
* If there are pending cpc_writes, then we stole the channel
|
|
* before write completion, so first send a WRITE command to
|
|
* platform
|
|
*/
|
|
if (pcc_ss_data->pending_pcc_write_cmd)
|
|
send_pcc_cmd(pcc_ss_id, CMD_WRITE);
|
|
|
|
ret = check_pcc_chan(pcc_ss_id, false);
|
|
if (ret)
|
|
goto end;
|
|
} else /* CMD_WRITE */
|
|
pcc_ss_data->pending_pcc_write_cmd = FALSE;
|
|
|
|
/*
|
|
* Handle the Minimum Request Turnaround Time(MRTT)
|
|
* "The minimum amount of time that OSPM must wait after the completion
|
|
* of a command before issuing the next command, in microseconds"
|
|
*/
|
|
if (pcc_ss_data->pcc_mrtt) {
|
|
time_delta = ktime_us_delta(ktime_get(),
|
|
pcc_ss_data->last_cmd_cmpl_time);
|
|
if (pcc_ss_data->pcc_mrtt > time_delta)
|
|
udelay(pcc_ss_data->pcc_mrtt - time_delta);
|
|
}
|
|
|
|
/*
|
|
* Handle the non-zero Maximum Periodic Access Rate(MPAR)
|
|
* "The maximum number of periodic requests that the subspace channel can
|
|
* support, reported in commands per minute. 0 indicates no limitation."
|
|
*
|
|
* This parameter should be ideally zero or large enough so that it can
|
|
* handle maximum number of requests that all the cores in the system can
|
|
* collectively generate. If it is not, we will follow the spec and just
|
|
* not send the request to the platform after hitting the MPAR limit in
|
|
* any 60s window
|
|
*/
|
|
if (pcc_ss_data->pcc_mpar) {
|
|
if (pcc_ss_data->mpar_count == 0) {
|
|
time_delta = ktime_ms_delta(ktime_get(),
|
|
pcc_ss_data->last_mpar_reset);
|
|
if ((time_delta < 60 * MSEC_PER_SEC) && pcc_ss_data->last_mpar_reset) {
|
|
pr_debug("PCC cmd for subspace %d not sent due to MPAR limit",
|
|
pcc_ss_id);
|
|
ret = -EIO;
|
|
goto end;
|
|
}
|
|
pcc_ss_data->last_mpar_reset = ktime_get();
|
|
pcc_ss_data->mpar_count = pcc_ss_data->pcc_mpar;
|
|
}
|
|
pcc_ss_data->mpar_count--;
|
|
}
|
|
|
|
/* Write to the shared comm region. */
|
|
writew_relaxed(cmd, &generic_comm_base->command);
|
|
|
|
/* Flip CMD COMPLETE bit */
|
|
writew_relaxed(0, &generic_comm_base->status);
|
|
|
|
pcc_ss_data->platform_owns_pcc = true;
|
|
|
|
/* Ring doorbell */
|
|
ret = mbox_send_message(pcc_ss_data->pcc_channel->mchan, &cmd);
|
|
if (ret < 0) {
|
|
pr_err("Err sending PCC mbox message. ss: %d cmd:%d, ret:%d\n",
|
|
pcc_ss_id, cmd, ret);
|
|
goto end;
|
|
}
|
|
|
|
/* wait for completion and check for PCC error bit */
|
|
ret = check_pcc_chan(pcc_ss_id, true);
|
|
|
|
if (pcc_ss_data->pcc_mrtt)
|
|
pcc_ss_data->last_cmd_cmpl_time = ktime_get();
|
|
|
|
if (pcc_ss_data->pcc_channel->mchan->mbox->txdone_irq)
|
|
mbox_chan_txdone(pcc_ss_data->pcc_channel->mchan, ret);
|
|
else
|
|
mbox_client_txdone(pcc_ss_data->pcc_channel->mchan, ret);
|
|
|
|
end:
|
|
if (cmd == CMD_WRITE) {
|
|
if (unlikely(ret)) {
|
|
for_each_possible_cpu(i) {
|
|
struct cpc_desc *desc = per_cpu(cpc_desc_ptr, i);
|
|
|
|
if (!desc)
|
|
continue;
|
|
|
|
if (desc->write_cmd_id == pcc_ss_data->pcc_write_cnt)
|
|
desc->write_cmd_status = ret;
|
|
}
|
|
}
|
|
pcc_ss_data->pcc_write_cnt++;
|
|
wake_up_all(&pcc_ss_data->pcc_write_wait_q);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void cppc_chan_tx_done(struct mbox_client *cl, void *msg, int ret)
|
|
{
|
|
if (ret < 0)
|
|
pr_debug("TX did not complete: CMD sent:%x, ret:%d\n",
|
|
*(u16 *)msg, ret);
|
|
else
|
|
pr_debug("TX completed. CMD sent:%x, ret:%d\n",
|
|
*(u16 *)msg, ret);
|
|
}
|
|
|
|
static struct mbox_client cppc_mbox_cl = {
|
|
.tx_done = cppc_chan_tx_done,
|
|
.knows_txdone = true,
|
|
};
|
|
|
|
static int acpi_get_psd(struct cpc_desc *cpc_ptr, acpi_handle handle)
|
|
{
|
|
int result = -EFAULT;
|
|
acpi_status status = AE_OK;
|
|
struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
|
|
struct acpi_buffer format = {sizeof("NNNNN"), "NNNNN"};
|
|
struct acpi_buffer state = {0, NULL};
|
|
union acpi_object *psd = NULL;
|
|
struct acpi_psd_package *pdomain;
|
|
|
|
status = acpi_evaluate_object_typed(handle, "_PSD", NULL,
|
|
&buffer, ACPI_TYPE_PACKAGE);
|
|
if (status == AE_NOT_FOUND) /* _PSD is optional */
|
|
return 0;
|
|
if (ACPI_FAILURE(status))
|
|
return -ENODEV;
|
|
|
|
psd = buffer.pointer;
|
|
if (!psd || psd->package.count != 1) {
|
|
pr_debug("Invalid _PSD data\n");
|
|
goto end;
|
|
}
|
|
|
|
pdomain = &(cpc_ptr->domain_info);
|
|
|
|
state.length = sizeof(struct acpi_psd_package);
|
|
state.pointer = pdomain;
|
|
|
|
status = acpi_extract_package(&(psd->package.elements[0]),
|
|
&format, &state);
|
|
if (ACPI_FAILURE(status)) {
|
|
pr_debug("Invalid _PSD data for CPU:%d\n", cpc_ptr->cpu_id);
|
|
goto end;
|
|
}
|
|
|
|
if (pdomain->num_entries != ACPI_PSD_REV0_ENTRIES) {
|
|
pr_debug("Unknown _PSD:num_entries for CPU:%d\n", cpc_ptr->cpu_id);
|
|
goto end;
|
|
}
|
|
|
|
if (pdomain->revision != ACPI_PSD_REV0_REVISION) {
|
|
pr_debug("Unknown _PSD:revision for CPU: %d\n", cpc_ptr->cpu_id);
|
|
goto end;
|
|
}
|
|
|
|
if (pdomain->coord_type != DOMAIN_COORD_TYPE_SW_ALL &&
|
|
pdomain->coord_type != DOMAIN_COORD_TYPE_SW_ANY &&
|
|
pdomain->coord_type != DOMAIN_COORD_TYPE_HW_ALL) {
|
|
pr_debug("Invalid _PSD:coord_type for CPU:%d\n", cpc_ptr->cpu_id);
|
|
goto end;
|
|
}
|
|
|
|
result = 0;
|
|
end:
|
|
kfree(buffer.pointer);
|
|
return result;
|
|
}
|
|
|
|
bool acpi_cpc_valid(void)
|
|
{
|
|
struct cpc_desc *cpc_ptr;
|
|
int cpu;
|
|
|
|
if (acpi_disabled)
|
|
return false;
|
|
|
|
for_each_online_cpu(cpu) {
|
|
cpc_ptr = per_cpu(cpc_desc_ptr, cpu);
|
|
if (!cpc_ptr)
|
|
return false;
|
|
}
|
|
|
|
return true;
|
|
}
|
|
EXPORT_SYMBOL_GPL(acpi_cpc_valid);
|
|
|
|
bool cppc_allow_fast_switch(const struct cpumask *cpus)
|
|
{
|
|
struct cpc_register_resource *desired_reg, *min_reg, *max_reg;
|
|
struct cpc_desc *cpc_ptr;
|
|
int cpu;
|
|
|
|
for_each_cpu(cpu, cpus) {
|
|
cpc_ptr = per_cpu(cpc_desc_ptr, cpu);
|
|
if (!cpc_ptr)
|
|
return false;
|
|
desired_reg = &cpc_ptr->cpc_regs[DESIRED_PERF];
|
|
min_reg = &cpc_ptr->cpc_regs[MIN_PERF];
|
|
max_reg = &cpc_ptr->cpc_regs[MAX_PERF];
|
|
|
|
if (!CPC_SUPPORTED(desired_reg) ||
|
|
(!CPC_IN_SYSTEM_MEMORY(desired_reg) &&
|
|
!CPC_IN_SYSTEM_IO(desired_reg)) ||
|
|
(CPC_SUPPORTED(min_reg) &&
|
|
!CPC_IN_SYSTEM_MEMORY(min_reg) &&
|
|
!CPC_IN_SYSTEM_IO(min_reg)) ||
|
|
(CPC_SUPPORTED(max_reg) &&
|
|
!CPC_IN_SYSTEM_MEMORY(max_reg) &&
|
|
!CPC_IN_SYSTEM_IO(max_reg)))
|
|
return false;
|
|
}
|
|
|
|
return true;
|
|
}
|
|
EXPORT_SYMBOL_GPL(cppc_allow_fast_switch);
|
|
|
|
/**
|
|
* acpi_get_psd_map - Map the CPUs in the freq domain of a given cpu
|
|
* @cpu: Find all CPUs that share a domain with cpu.
|
|
* @cpu_data: Pointer to CPU specific CPPC data including PSD info.
|
|
*
|
|
* Return: 0 for success or negative value for err.
|
|
*/
|
|
int acpi_get_psd_map(unsigned int cpu, struct cppc_cpudata *cpu_data)
|
|
{
|
|
struct cpc_desc *cpc_ptr, *match_cpc_ptr;
|
|
struct acpi_psd_package *match_pdomain;
|
|
struct acpi_psd_package *pdomain;
|
|
int count_target, i;
|
|
|
|
/*
|
|
* Now that we have _PSD data from all CPUs, let's setup P-state
|
|
* domain info.
|
|
*/
|
|
cpc_ptr = per_cpu(cpc_desc_ptr, cpu);
|
|
if (!cpc_ptr)
|
|
return -EFAULT;
|
|
|
|
pdomain = &(cpc_ptr->domain_info);
|
|
cpumask_set_cpu(cpu, cpu_data->shared_cpu_map);
|
|
if (pdomain->num_processors <= 1)
|
|
return 0;
|
|
|
|
/* Validate the Domain info */
|
|
count_target = pdomain->num_processors;
|
|
if (pdomain->coord_type == DOMAIN_COORD_TYPE_SW_ALL)
|
|
cpu_data->shared_type = CPUFREQ_SHARED_TYPE_ALL;
|
|
else if (pdomain->coord_type == DOMAIN_COORD_TYPE_HW_ALL)
|
|
cpu_data->shared_type = CPUFREQ_SHARED_TYPE_HW;
|
|
else if (pdomain->coord_type == DOMAIN_COORD_TYPE_SW_ANY)
|
|
cpu_data->shared_type = CPUFREQ_SHARED_TYPE_ANY;
|
|
|
|
for_each_possible_cpu(i) {
|
|
if (i == cpu)
|
|
continue;
|
|
|
|
match_cpc_ptr = per_cpu(cpc_desc_ptr, i);
|
|
if (!match_cpc_ptr)
|
|
continue;
|
|
|
|
match_pdomain = &(match_cpc_ptr->domain_info);
|
|
if (match_pdomain->domain != pdomain->domain)
|
|
continue;
|
|
|
|
/* Here i and cpu are in the same domain */
|
|
if (match_pdomain->num_processors != count_target)
|
|
goto err_fault;
|
|
|
|
if (pdomain->coord_type != match_pdomain->coord_type)
|
|
goto err_fault;
|
|
|
|
cpumask_set_cpu(i, cpu_data->shared_cpu_map);
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_fault:
|
|
/* Assume no coordination on any error parsing domain info */
|
|
cpumask_clear(cpu_data->shared_cpu_map);
|
|
cpumask_set_cpu(cpu, cpu_data->shared_cpu_map);
|
|
cpu_data->shared_type = CPUFREQ_SHARED_TYPE_NONE;
|
|
|
|
return -EFAULT;
|
|
}
|
|
EXPORT_SYMBOL_GPL(acpi_get_psd_map);
|
|
|
|
static int register_pcc_channel(int pcc_ss_idx)
|
|
{
|
|
struct pcc_mbox_chan *pcc_chan;
|
|
u64 usecs_lat;
|
|
|
|
if (pcc_ss_idx >= 0) {
|
|
pcc_chan = pcc_mbox_request_channel(&cppc_mbox_cl, pcc_ss_idx);
|
|
|
|
if (IS_ERR(pcc_chan)) {
|
|
pr_err("Failed to find PCC channel for subspace %d\n",
|
|
pcc_ss_idx);
|
|
return -ENODEV;
|
|
}
|
|
|
|
pcc_data[pcc_ss_idx]->pcc_channel = pcc_chan;
|
|
/*
|
|
* cppc_ss->latency is just a Nominal value. In reality
|
|
* the remote processor could be much slower to reply.
|
|
* So add an arbitrary amount of wait on top of Nominal.
|
|
*/
|
|
usecs_lat = NUM_RETRIES * pcc_chan->latency;
|
|
pcc_data[pcc_ss_idx]->deadline_us = usecs_lat;
|
|
pcc_data[pcc_ss_idx]->pcc_mrtt = pcc_chan->min_turnaround_time;
|
|
pcc_data[pcc_ss_idx]->pcc_mpar = pcc_chan->max_access_rate;
|
|
pcc_data[pcc_ss_idx]->pcc_nominal = pcc_chan->latency;
|
|
|
|
/* Set flag so that we don't come here for each CPU. */
|
|
pcc_data[pcc_ss_idx]->pcc_channel_acquired = true;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* cpc_ffh_supported() - check if FFH reading supported
|
|
*
|
|
* Check if the architecture has support for functional fixed hardware
|
|
* read/write capability.
|
|
*
|
|
* Return: true for supported, false for not supported
|
|
*/
|
|
bool __weak cpc_ffh_supported(void)
|
|
{
|
|
return false;
|
|
}
|
|
|
|
/**
|
|
* cpc_supported_by_cpu() - check if CPPC is supported by CPU
|
|
*
|
|
* Check if the architectural support for CPPC is present even
|
|
* if the _OSC hasn't prescribed it
|
|
*
|
|
* Return: true for supported, false for not supported
|
|
*/
|
|
bool __weak cpc_supported_by_cpu(void)
|
|
{
|
|
return false;
|
|
}
|
|
|
|
/**
|
|
* pcc_data_alloc() - Allocate the pcc_data memory for pcc subspace
|
|
* @pcc_ss_id: PCC Subspace index as in the PCC client ACPI package.
|
|
*
|
|
* Check and allocate the cppc_pcc_data memory.
|
|
* In some processor configurations it is possible that same subspace
|
|
* is shared between multiple CPUs. This is seen especially in CPUs
|
|
* with hardware multi-threading support.
|
|
*
|
|
* Return: 0 for success, errno for failure
|
|
*/
|
|
static int pcc_data_alloc(int pcc_ss_id)
|
|
{
|
|
if (pcc_ss_id < 0 || pcc_ss_id >= MAX_PCC_SUBSPACES)
|
|
return -EINVAL;
|
|
|
|
if (pcc_data[pcc_ss_id]) {
|
|
pcc_data[pcc_ss_id]->refcount++;
|
|
} else {
|
|
pcc_data[pcc_ss_id] = kzalloc_obj(struct cppc_pcc_data);
|
|
if (!pcc_data[pcc_ss_id])
|
|
return -ENOMEM;
|
|
pcc_data[pcc_ss_id]->refcount++;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* An example CPC table looks like the following.
|
|
*
|
|
* Name (_CPC, Package() {
|
|
* 17, // NumEntries
|
|
* 1, // Revision
|
|
* ResourceTemplate() {Register(PCC, 32, 0, 0x120, 2)}, // Highest Performance
|
|
* ResourceTemplate() {Register(PCC, 32, 0, 0x124, 2)}, // Nominal Performance
|
|
* ResourceTemplate() {Register(PCC, 32, 0, 0x128, 2)}, // Lowest Nonlinear Performance
|
|
* ResourceTemplate() {Register(PCC, 32, 0, 0x12C, 2)}, // Lowest Performance
|
|
* ResourceTemplate() {Register(PCC, 32, 0, 0x130, 2)}, // Guaranteed Performance Register
|
|
* ResourceTemplate() {Register(PCC, 32, 0, 0x110, 2)}, // Desired Performance Register
|
|
* ResourceTemplate() {Register(SystemMemory, 0, 0, 0, 0)},
|
|
* ...
|
|
* ...
|
|
* ...
|
|
* }
|
|
* Each Register() encodes how to access that specific register.
|
|
* e.g. a sample PCC entry has the following encoding:
|
|
*
|
|
* Register (
|
|
* PCC, // AddressSpaceKeyword
|
|
* 8, // RegisterBitWidth
|
|
* 8, // RegisterBitOffset
|
|
* 0x30, // RegisterAddress
|
|
* 9, // AccessSize (subspace ID)
|
|
* )
|
|
*/
|
|
|
|
/**
|
|
* acpi_cppc_processor_probe - Search for per CPU _CPC objects.
|
|
* @pr: Ptr to acpi_processor containing this CPU's logical ID.
|
|
*
|
|
* Return: 0 for success or negative value for err.
|
|
*/
|
|
int acpi_cppc_processor_probe(struct acpi_processor *pr)
|
|
{
|
|
struct acpi_buffer output = {ACPI_ALLOCATE_BUFFER, NULL};
|
|
union acpi_object *out_obj, *cpc_obj;
|
|
struct cpc_desc *cpc_ptr;
|
|
struct cpc_reg *gas_t;
|
|
struct device *cpu_dev;
|
|
acpi_handle handle = pr->handle;
|
|
unsigned int num_ent, i, cpc_rev;
|
|
int pcc_subspace_id = -1;
|
|
acpi_status status;
|
|
int ret = -ENODATA;
|
|
|
|
if (!osc_sb_cppc2_support_acked) {
|
|
pr_debug("CPPC v2 _OSC not acked\n");
|
|
if (!cpc_supported_by_cpu()) {
|
|
pr_debug("CPPC is not supported by the CPU\n");
|
|
return -ENODEV;
|
|
}
|
|
}
|
|
|
|
/* Parse the ACPI _CPC table for this CPU. */
|
|
status = acpi_evaluate_object_typed(handle, "_CPC", NULL, &output,
|
|
ACPI_TYPE_PACKAGE);
|
|
if (ACPI_FAILURE(status)) {
|
|
ret = -ENODEV;
|
|
goto out_buf_free;
|
|
}
|
|
|
|
out_obj = (union acpi_object *) output.pointer;
|
|
|
|
cpc_ptr = kzalloc_obj(struct cpc_desc);
|
|
if (!cpc_ptr) {
|
|
ret = -ENOMEM;
|
|
goto out_buf_free;
|
|
}
|
|
|
|
/* First entry is NumEntries. */
|
|
cpc_obj = &out_obj->package.elements[0];
|
|
if (cpc_obj->type == ACPI_TYPE_INTEGER) {
|
|
num_ent = cpc_obj->integer.value;
|
|
if (num_ent <= 1) {
|
|
pr_debug("Unexpected _CPC NumEntries value (%d) for CPU:%d\n",
|
|
num_ent, pr->id);
|
|
goto out_free;
|
|
}
|
|
} else {
|
|
pr_debug("Unexpected _CPC NumEntries entry type (%d) for CPU:%d\n",
|
|
cpc_obj->type, pr->id);
|
|
goto out_free;
|
|
}
|
|
|
|
/* Second entry should be revision. */
|
|
cpc_obj = &out_obj->package.elements[1];
|
|
if (cpc_obj->type == ACPI_TYPE_INTEGER) {
|
|
cpc_rev = cpc_obj->integer.value;
|
|
} else {
|
|
pr_debug("Unexpected _CPC Revision entry type (%d) for CPU:%d\n",
|
|
cpc_obj->type, pr->id);
|
|
goto out_free;
|
|
}
|
|
|
|
if (cpc_rev < CPPC_V2_REV) {
|
|
pr_debug("Unsupported _CPC Revision (%d) for CPU:%d\n", cpc_rev,
|
|
pr->id);
|
|
goto out_free;
|
|
}
|
|
|
|
/*
|
|
* Disregard _CPC if the number of entries in the return package is not
|
|
* as expected, but support future revisions being proper supersets of
|
|
* the v4 and only causing more entries to be returned by _CPC.
|
|
*/
|
|
if ((cpc_rev == CPPC_V2_REV && num_ent != CPPC_V2_NUM_ENT) ||
|
|
(cpc_rev == CPPC_V3_REV && num_ent != CPPC_V3_NUM_ENT) ||
|
|
(cpc_rev == CPPC_V4_REV && num_ent != CPPC_V4_NUM_ENT) ||
|
|
(cpc_rev > CPPC_V4_REV && num_ent <= CPPC_V4_NUM_ENT)) {
|
|
pr_debug("Unexpected number of _CPC return package entries (%d) for CPU:%d\n",
|
|
num_ent, pr->id);
|
|
goto out_free;
|
|
}
|
|
if (cpc_rev > CPPC_V4_REV) {
|
|
num_ent = CPPC_V4_NUM_ENT;
|
|
cpc_rev = CPPC_V4_REV;
|
|
}
|
|
|
|
cpc_ptr->num_entries = num_ent;
|
|
cpc_ptr->version = cpc_rev;
|
|
|
|
/* Iterate through remaining entries in _CPC */
|
|
for (i = 2; i < num_ent; i++) {
|
|
cpc_obj = &out_obj->package.elements[i];
|
|
|
|
if (cpc_obj->type == ACPI_TYPE_INTEGER) {
|
|
cpc_ptr->cpc_regs[i-2].type = ACPI_TYPE_INTEGER;
|
|
cpc_ptr->cpc_regs[i-2].cpc_entry.int_value = cpc_obj->integer.value;
|
|
} else if (cpc_obj->type == ACPI_TYPE_BUFFER) {
|
|
gas_t = (struct cpc_reg *)
|
|
cpc_obj->buffer.pointer;
|
|
|
|
/*
|
|
* The PCC Subspace index is encoded inside
|
|
* the CPC table entries. The same PCC index
|
|
* will be used for all the PCC entries,
|
|
* so extract it only once.
|
|
*/
|
|
if (gas_t->space_id == ACPI_ADR_SPACE_PLATFORM_COMM) {
|
|
if (pcc_subspace_id < 0) {
|
|
pcc_subspace_id = gas_t->access_width;
|
|
if (pcc_data_alloc(pcc_subspace_id))
|
|
goto out_free;
|
|
} else if (pcc_subspace_id != gas_t->access_width) {
|
|
pr_debug("Mismatched PCC ids in _CPC for CPU:%d\n",
|
|
pr->id);
|
|
goto out_free;
|
|
}
|
|
} else if (gas_t->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
|
|
if (gas_t->address) {
|
|
void __iomem *addr;
|
|
size_t access_width;
|
|
|
|
if (!osc_cpc_flexible_adr_space_confirmed) {
|
|
pr_debug("Flexible address space capability not supported\n");
|
|
if (!cpc_supported_by_cpu())
|
|
goto out_free;
|
|
}
|
|
|
|
access_width = GET_BIT_WIDTH(gas_t) / 8;
|
|
addr = ioremap(gas_t->address, access_width);
|
|
if (!addr)
|
|
goto out_free;
|
|
cpc_ptr->cpc_regs[i-2].sys_mem_vaddr = addr;
|
|
}
|
|
} else if (gas_t->space_id == ACPI_ADR_SPACE_SYSTEM_IO) {
|
|
if (gas_t->access_width < 1 || gas_t->access_width > 3) {
|
|
/*
|
|
* 1 = 8-bit, 2 = 16-bit, and 3 = 32-bit.
|
|
* SystemIO doesn't implement 64-bit
|
|
* registers.
|
|
*/
|
|
pr_debug("Invalid access width %d for SystemIO register in _CPC\n",
|
|
gas_t->access_width);
|
|
goto out_free;
|
|
}
|
|
if (gas_t->address & OVER_16BTS_MASK) {
|
|
/* SystemIO registers use 16-bit integer addresses */
|
|
pr_debug("Invalid IO port %llu for SystemIO register in _CPC\n",
|
|
gas_t->address);
|
|
goto out_free;
|
|
}
|
|
if (!osc_cpc_flexible_adr_space_confirmed) {
|
|
pr_debug("Flexible address space capability not supported\n");
|
|
if (!cpc_supported_by_cpu())
|
|
goto out_free;
|
|
}
|
|
} else {
|
|
if (gas_t->space_id != ACPI_ADR_SPACE_FIXED_HARDWARE || !cpc_ffh_supported()) {
|
|
/* Support only PCC, SystemMemory, SystemIO, and FFH type regs. */
|
|
pr_debug("Unsupported register type (%d) in _CPC\n",
|
|
gas_t->space_id);
|
|
goto out_free;
|
|
}
|
|
}
|
|
|
|
cpc_ptr->cpc_regs[i-2].type = ACPI_TYPE_BUFFER;
|
|
memcpy(&cpc_ptr->cpc_regs[i-2].cpc_entry.reg, gas_t, sizeof(*gas_t));
|
|
} else if (cpc_obj->type == ACPI_TYPE_PACKAGE && (i - 2) == RESOURCE_PRIORITY) {
|
|
/*
|
|
* ACPI 6.6, s8.4.6.1.2.7 defines Resource Priority as a
|
|
* Package of Resource Priority Register Descriptor sub-packages.
|
|
* Parsing the full structure is not yet supported.
|
|
* Mark the register as unsupported for now.
|
|
*/
|
|
pr_debug("CPU:%d Resource Priority not supported\n", pr->id);
|
|
cpc_ptr->cpc_regs[i-2].type = ACPI_TYPE_INTEGER;
|
|
cpc_ptr->cpc_regs[i-2].cpc_entry.int_value = 0;
|
|
} else {
|
|
pr_debug("Invalid entry type (%d) in _CPC for CPU:%d\n",
|
|
i, pr->id);
|
|
goto out_free;
|
|
}
|
|
}
|
|
per_cpu(cpu_pcc_subspace_idx, pr->id) = pcc_subspace_id;
|
|
|
|
/*
|
|
* In CPPC v1, DESIRED_PERF is mandatory. In CPPC v2, it is optional
|
|
* only when AUTO_SEL_ENABLE is supported.
|
|
*/
|
|
if (!CPC_SUPPORTED(&cpc_ptr->cpc_regs[DESIRED_PERF]) &&
|
|
(!osc_sb_cppc2_support_acked ||
|
|
!CPC_SUPPORTED(&cpc_ptr->cpc_regs[AUTO_SEL_ENABLE])))
|
|
pr_warn("Desired perf. register is mandatory if CPPC v2 is not supported "
|
|
"or autonomous selection is disabled\n");
|
|
|
|
/*
|
|
* Initialize the remaining cpc_regs as unsupported.
|
|
* Example: In case FW exposes CPPC v2, the below loop will initialize
|
|
* LOWEST_FREQ and NOMINAL_FREQ regs as unsupported
|
|
*/
|
|
for (i = num_ent - 2; i < MAX_CPC_REG_ENT; i++) {
|
|
cpc_ptr->cpc_regs[i].type = ACPI_TYPE_INTEGER;
|
|
cpc_ptr->cpc_regs[i].cpc_entry.int_value = 0;
|
|
}
|
|
|
|
|
|
/* Store CPU Logical ID */
|
|
cpc_ptr->cpu_id = pr->id;
|
|
cpc_mark_rmw_lock_users(cpc_ptr);
|
|
raw_spin_lock_init(&cpc_ptr->rmw_lock);
|
|
|
|
/* Parse PSD data for this CPU */
|
|
ret = acpi_get_psd(cpc_ptr, handle);
|
|
if (ret)
|
|
goto out_free;
|
|
|
|
/* Register PCC channel once for all PCC subspace ID. */
|
|
if (pcc_subspace_id >= 0 && !pcc_data[pcc_subspace_id]->pcc_channel_acquired) {
|
|
ret = register_pcc_channel(pcc_subspace_id);
|
|
if (ret)
|
|
goto out_free;
|
|
|
|
init_rwsem(&pcc_data[pcc_subspace_id]->pcc_lock);
|
|
init_waitqueue_head(&pcc_data[pcc_subspace_id]->pcc_write_wait_q);
|
|
}
|
|
|
|
/* Everything looks okay */
|
|
pr_debug("Parsed CPC struct for CPU: %d\n", pr->id);
|
|
|
|
/* Add per logical CPU nodes for reading its feedback counters. */
|
|
cpu_dev = get_cpu_device(pr->id);
|
|
if (!cpu_dev) {
|
|
ret = -EINVAL;
|
|
goto out_free;
|
|
}
|
|
|
|
/* Plug PSD data into this CPU's CPC descriptor. */
|
|
per_cpu(cpc_desc_ptr, pr->id) = cpc_ptr;
|
|
|
|
ret = kobject_init_and_add(&cpc_ptr->kobj, &cppc_ktype, &cpu_dev->kobj,
|
|
"acpi_cppc");
|
|
if (ret) {
|
|
per_cpu(cpc_desc_ptr, pr->id) = NULL;
|
|
kobject_put(&cpc_ptr->kobj);
|
|
goto out_free;
|
|
}
|
|
|
|
kfree(output.pointer);
|
|
return 0;
|
|
|
|
out_free:
|
|
/* Free all the mapped sys mem areas for this CPU */
|
|
for (i = 2; i < cpc_ptr->num_entries; i++) {
|
|
void __iomem *addr = cpc_ptr->cpc_regs[i-2].sys_mem_vaddr;
|
|
|
|
if (addr)
|
|
iounmap(addr);
|
|
}
|
|
kfree(cpc_ptr);
|
|
|
|
out_buf_free:
|
|
kfree(output.pointer);
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(acpi_cppc_processor_probe);
|
|
|
|
/**
|
|
* acpi_cppc_processor_exit - Cleanup CPC structs.
|
|
* @pr: Ptr to acpi_processor containing this CPU's logical ID.
|
|
*
|
|
* Return: Void
|
|
*/
|
|
void acpi_cppc_processor_exit(struct acpi_processor *pr)
|
|
{
|
|
struct cpc_desc *cpc_ptr;
|
|
unsigned int i;
|
|
void __iomem *addr;
|
|
int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, pr->id);
|
|
|
|
if (pcc_ss_id >= 0 && pcc_data[pcc_ss_id]) {
|
|
if (pcc_data[pcc_ss_id]->pcc_channel_acquired) {
|
|
pcc_data[pcc_ss_id]->refcount--;
|
|
if (!pcc_data[pcc_ss_id]->refcount) {
|
|
pcc_mbox_free_channel(pcc_data[pcc_ss_id]->pcc_channel);
|
|
kfree(pcc_data[pcc_ss_id]);
|
|
pcc_data[pcc_ss_id] = NULL;
|
|
}
|
|
}
|
|
}
|
|
|
|
cpc_ptr = per_cpu(cpc_desc_ptr, pr->id);
|
|
if (!cpc_ptr)
|
|
return;
|
|
|
|
/* Free all the mapped sys mem areas for this CPU */
|
|
for (i = 2; i < cpc_ptr->num_entries; i++) {
|
|
addr = cpc_ptr->cpc_regs[i-2].sys_mem_vaddr;
|
|
if (addr)
|
|
iounmap(addr);
|
|
}
|
|
|
|
kobject_put(&cpc_ptr->kobj);
|
|
kfree(cpc_ptr);
|
|
}
|
|
EXPORT_SYMBOL_GPL(acpi_cppc_processor_exit);
|
|
|
|
/**
|
|
* cpc_read_ffh() - Read FFH register
|
|
* @cpunum: CPU number to read
|
|
* @reg: cppc register information
|
|
* @val: place holder for return value
|
|
*
|
|
* Read bit_width bits from a specified address and bit_offset
|
|
*
|
|
* Return: 0 for success and error code
|
|
*/
|
|
int __weak cpc_read_ffh(int cpunum, struct cpc_reg *reg, u64 *val)
|
|
{
|
|
return -ENOTSUPP;
|
|
}
|
|
|
|
/**
|
|
* cpc_read_ffh_fb_ctrs() - Read FFH feedback counters together
|
|
* @cpunum: Target CPU
|
|
* @reg1: first CPPC register information
|
|
* @val1: place holder for first return value
|
|
* @reg2: second CPPC register information
|
|
* @val2: place holder for second return value
|
|
*
|
|
* Return: 0 on success, error code otherwise
|
|
*/
|
|
int __weak cpc_read_ffh_fb_ctrs(int cpunum, struct cpc_reg *reg1,
|
|
u64 *val1, struct cpc_reg *reg2, u64 *val2)
|
|
{
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
/**
|
|
* cpc_write_ffh() - Write FFH register
|
|
* @cpunum: CPU number to write
|
|
* @reg: cppc register information
|
|
* @val: value to write
|
|
*
|
|
* Write value of bit_width bits to a specified address and bit_offset
|
|
*
|
|
* Return: 0 for success and error code
|
|
*/
|
|
int __weak cpc_write_ffh(int cpunum, struct cpc_reg *reg, u64 val)
|
|
{
|
|
return -ENOTSUPP;
|
|
}
|
|
|
|
/*
|
|
* Since cpc_read and cpc_write are called while holding pcc_lock, it should be
|
|
* as fast as possible. We have already mapped the PCC subspace during init, so
|
|
* we can directly write to it.
|
|
*/
|
|
|
|
static int cpc_read(int cpu, struct cpc_register_resource *reg_res, u64 *val)
|
|
{
|
|
void __iomem *vaddr = NULL;
|
|
int size;
|
|
int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpu);
|
|
struct cpc_reg *reg = ®_res->cpc_entry.reg;
|
|
|
|
if (reg_res->type == ACPI_TYPE_INTEGER) {
|
|
*val = reg_res->cpc_entry.int_value;
|
|
return 0;
|
|
}
|
|
|
|
*val = 0;
|
|
size = GET_BIT_WIDTH(reg);
|
|
|
|
if (IS_ENABLED(CONFIG_HAS_IOPORT) &&
|
|
reg->space_id == ACPI_ADR_SPACE_SYSTEM_IO) {
|
|
u32 val_u32;
|
|
acpi_status status;
|
|
|
|
status = acpi_os_read_port((acpi_io_address)reg->address,
|
|
&val_u32, size);
|
|
if (ACPI_FAILURE(status)) {
|
|
pr_debug("Error: Failed to read SystemIO port %llx\n",
|
|
reg->address);
|
|
return -EFAULT;
|
|
}
|
|
|
|
*val = val_u32;
|
|
return 0;
|
|
} else if (reg->space_id == ACPI_ADR_SPACE_PLATFORM_COMM && pcc_ss_id >= 0) {
|
|
/*
|
|
* For registers in PCC space, the register size is determined
|
|
* by the bit width field; the access size is used to indicate
|
|
* the PCC subspace id.
|
|
*/
|
|
vaddr = GET_PCC_VADDR(reg->address, pcc_ss_id);
|
|
}
|
|
else if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY)
|
|
vaddr = reg_res->sys_mem_vaddr;
|
|
else if (reg->space_id == ACPI_ADR_SPACE_FIXED_HARDWARE)
|
|
return cpc_read_ffh(cpu, reg, val);
|
|
else
|
|
return acpi_os_read_memory((acpi_physical_address)reg->address,
|
|
val, size);
|
|
|
|
switch (size) {
|
|
case 8:
|
|
*val = readb_relaxed(vaddr);
|
|
break;
|
|
case 16:
|
|
*val = readw_relaxed(vaddr);
|
|
break;
|
|
case 32:
|
|
*val = readl_relaxed(vaddr);
|
|
break;
|
|
case 64:
|
|
*val = readq_relaxed(vaddr);
|
|
break;
|
|
default:
|
|
if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
|
|
pr_debug("Error: Cannot read %u bit width from system memory: 0x%llx\n",
|
|
size, reg->address);
|
|
} else if (reg->space_id == ACPI_ADR_SPACE_PLATFORM_COMM) {
|
|
pr_debug("Error: Cannot read %u bit width from PCC for ss: %d\n",
|
|
size, pcc_ss_id);
|
|
}
|
|
return -EFAULT;
|
|
}
|
|
|
|
if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY)
|
|
*val = MASK_VAL_READ(reg, *val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cpc_write(int cpu, struct cpc_register_resource *reg_res, u64 val)
|
|
{
|
|
int ret_val = 0;
|
|
int size;
|
|
u64 prev_val;
|
|
void __iomem *vaddr = NULL;
|
|
int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpu);
|
|
struct cpc_reg *reg = ®_res->cpc_entry.reg;
|
|
struct cpc_desc *cpc_desc;
|
|
unsigned long flags;
|
|
bool locked = false;
|
|
|
|
size = GET_BIT_WIDTH(reg);
|
|
|
|
if (IS_ENABLED(CONFIG_HAS_IOPORT) &&
|
|
reg->space_id == ACPI_ADR_SPACE_SYSTEM_IO) {
|
|
acpi_status status;
|
|
|
|
status = acpi_os_write_port((acpi_io_address)reg->address,
|
|
(u32)val, size);
|
|
if (ACPI_FAILURE(status)) {
|
|
pr_debug("Error: Failed to write SystemIO port %llx\n",
|
|
reg->address);
|
|
return -EFAULT;
|
|
}
|
|
|
|
return 0;
|
|
} else if (reg->space_id == ACPI_ADR_SPACE_PLATFORM_COMM && pcc_ss_id >= 0) {
|
|
/*
|
|
* For registers in PCC space, the register size is determined
|
|
* by the bit width field; the access size is used to indicate
|
|
* the PCC subspace id.
|
|
*/
|
|
vaddr = GET_PCC_VADDR(reg->address, pcc_ss_id);
|
|
}
|
|
else if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY)
|
|
vaddr = reg_res->sys_mem_vaddr;
|
|
else if (reg->space_id == ACPI_ADR_SPACE_FIXED_HARDWARE)
|
|
return cpc_write_ffh(cpu, reg, val);
|
|
else
|
|
return acpi_os_write_memory((acpi_physical_address)reg->address,
|
|
val, size);
|
|
|
|
if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
|
|
/*
|
|
* The _CPC layout is immutable after probe. The precomputed flag
|
|
* retains serialization for partial fields or overlapping access
|
|
* units; standalone full-width registers avoid the lock.
|
|
*/
|
|
locked = reg_res->cpc_entry.use_rmw_lock;
|
|
if (locked) {
|
|
cpc_desc = per_cpu(cpc_desc_ptr, cpu);
|
|
if (!cpc_desc) {
|
|
pr_debug("No CPC descriptor for CPU:%d\n", cpu);
|
|
return -ENODEV;
|
|
}
|
|
raw_spin_lock_irqsave(&cpc_desc->rmw_lock, flags);
|
|
}
|
|
|
|
if (reg->bit_offset || reg->bit_width != size) {
|
|
switch (size) {
|
|
case 8:
|
|
prev_val = readb_relaxed(vaddr);
|
|
break;
|
|
case 16:
|
|
prev_val = readw_relaxed(vaddr);
|
|
break;
|
|
case 32:
|
|
prev_val = readl_relaxed(vaddr);
|
|
break;
|
|
case 64:
|
|
prev_val = readq_relaxed(vaddr);
|
|
break;
|
|
default:
|
|
if (locked)
|
|
raw_spin_unlock_irqrestore(&cpc_desc->rmw_lock,
|
|
flags);
|
|
return -EFAULT;
|
|
}
|
|
val = MASK_VAL_WRITE(reg, prev_val, val);
|
|
}
|
|
}
|
|
|
|
switch (size) {
|
|
case 8:
|
|
writeb_relaxed(val, vaddr);
|
|
break;
|
|
case 16:
|
|
writew_relaxed(val, vaddr);
|
|
break;
|
|
case 32:
|
|
writel_relaxed(val, vaddr);
|
|
break;
|
|
case 64:
|
|
writeq_relaxed(val, vaddr);
|
|
break;
|
|
default:
|
|
if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
|
|
pr_debug("Error: Cannot write %u bit width to system memory: 0x%llx\n",
|
|
size, reg->address);
|
|
} else if (reg->space_id == ACPI_ADR_SPACE_PLATFORM_COMM) {
|
|
pr_debug("Error: Cannot write %u bit width to PCC for ss: %d\n",
|
|
size, pcc_ss_id);
|
|
}
|
|
ret_val = -EFAULT;
|
|
break;
|
|
}
|
|
|
|
if (locked)
|
|
raw_spin_unlock_irqrestore(&cpc_desc->rmw_lock, flags);
|
|
|
|
return ret_val;
|
|
}
|
|
|
|
static int cppc_get_reg_val_in_pcc(int cpu, struct cpc_register_resource *reg, u64 *val)
|
|
{
|
|
int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpu);
|
|
struct cppc_pcc_data *pcc_ss_data = NULL;
|
|
int ret;
|
|
|
|
if (pcc_ss_id < 0) {
|
|
pr_debug("Invalid pcc_ss_id\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
pcc_ss_data = pcc_data[pcc_ss_id];
|
|
|
|
down_write(&pcc_ss_data->pcc_lock);
|
|
|
|
if (send_pcc_cmd(pcc_ss_id, CMD_READ) >= 0)
|
|
ret = cpc_read(cpu, reg, val);
|
|
else
|
|
ret = -EIO;
|
|
|
|
up_write(&pcc_ss_data->pcc_lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int cppc_get_reg_val(int cpu, enum cppc_regs reg_idx, u64 *val)
|
|
{
|
|
struct cpc_desc *cpc_desc = per_cpu(cpc_desc_ptr, cpu);
|
|
struct cpc_register_resource *reg;
|
|
|
|
if (val == NULL)
|
|
return -EINVAL;
|
|
|
|
if (!cpc_desc) {
|
|
pr_debug("No CPC descriptor for CPU:%d\n", cpu);
|
|
return -ENODEV;
|
|
}
|
|
|
|
reg = &cpc_desc->cpc_regs[reg_idx];
|
|
|
|
if ((reg->type == ACPI_TYPE_INTEGER && IS_OPTIONAL_CPC_REG(reg_idx) &&
|
|
!reg->cpc_entry.int_value) || (reg->type != ACPI_TYPE_INTEGER &&
|
|
IS_NULL_REG(®->cpc_entry.reg))) {
|
|
pr_debug("CPC register is not supported\n");
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
if (CPC_IN_PCC(reg))
|
|
return cppc_get_reg_val_in_pcc(cpu, reg, val);
|
|
|
|
return cpc_read(cpu, reg, val);
|
|
}
|
|
|
|
static int cppc_set_reg_val_in_pcc(int cpu, struct cpc_register_resource *reg, u64 val)
|
|
{
|
|
int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpu);
|
|
struct cppc_pcc_data *pcc_ss_data = NULL;
|
|
int ret;
|
|
|
|
if (pcc_ss_id < 0) {
|
|
pr_debug("Invalid pcc_ss_id\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
ret = cpc_write(cpu, reg, val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
pcc_ss_data = pcc_data[pcc_ss_id];
|
|
|
|
down_write(&pcc_ss_data->pcc_lock);
|
|
/* after writing CPC, transfer the ownership of PCC to platform */
|
|
ret = send_pcc_cmd(pcc_ss_id, CMD_WRITE);
|
|
up_write(&pcc_ss_data->pcc_lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int cppc_set_reg_val(int cpu, enum cppc_regs reg_idx, u64 val)
|
|
{
|
|
struct cpc_desc *cpc_desc = per_cpu(cpc_desc_ptr, cpu);
|
|
struct cpc_register_resource *reg;
|
|
|
|
if (!cpc_desc) {
|
|
pr_debug("No CPC descriptor for CPU:%d\n", cpu);
|
|
return -ENODEV;
|
|
}
|
|
|
|
reg = &cpc_desc->cpc_regs[reg_idx];
|
|
|
|
/* if a register is writeable, it must be a buffer and not null */
|
|
if ((reg->type != ACPI_TYPE_BUFFER) || IS_NULL_REG(®->cpc_entry.reg)) {
|
|
pr_debug("CPC register is not supported\n");
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
if (CPC_IN_PCC(reg))
|
|
return cppc_set_reg_val_in_pcc(cpu, reg, val);
|
|
|
|
return cpc_write(cpu, reg, val);
|
|
}
|
|
|
|
static bool cppc_desired_perf_readable(const struct cpc_desc *cpc_desc)
|
|
{
|
|
return cpc_desc->version < CPPC_V4_REV;
|
|
}
|
|
|
|
/**
|
|
* cppc_get_desired_perf - Get the desired performance register value.
|
|
* @cpunum: CPU from which to get desired performance.
|
|
* @desired_perf: Return address.
|
|
*
|
|
* Return: 0 for success, -EOPNOTSUPP for _CPC revision 4 or later, and a
|
|
* negative errno otherwise.
|
|
*/
|
|
int cppc_get_desired_perf(int cpunum, u64 *desired_perf)
|
|
{
|
|
struct cpc_desc *cpc_desc = per_cpu(cpc_desc_ptr, cpunum);
|
|
|
|
if (!cpc_desc)
|
|
return -ENODEV;
|
|
|
|
/* _CPC revision 4 no longer specifies Desired Performance as readable. */
|
|
if (!cppc_desired_perf_readable(cpc_desc))
|
|
return -EOPNOTSUPP;
|
|
|
|
return cppc_get_reg_val(cpunum, DESIRED_PERF, desired_perf);
|
|
}
|
|
EXPORT_SYMBOL_GPL(cppc_get_desired_perf);
|
|
|
|
/**
|
|
* cppc_get_nominal_perf - Get the nominal performance register value.
|
|
* @cpunum: CPU from which to get nominal performance.
|
|
* @nominal_perf: Return address.
|
|
*
|
|
* Return: 0 for success, -EIO otherwise.
|
|
*/
|
|
int cppc_get_nominal_perf(int cpunum, u64 *nominal_perf)
|
|
{
|
|
return cppc_get_reg_val(cpunum, NOMINAL_PERF, nominal_perf);
|
|
}
|
|
|
|
/**
|
|
* cppc_get_highest_perf - Get the highest performance register value.
|
|
* @cpunum: CPU from which to get highest performance.
|
|
* @highest_perf: Return address.
|
|
*
|
|
* Return: 0 for success, -EIO otherwise.
|
|
*/
|
|
int cppc_get_highest_perf(int cpunum, u64 *highest_perf)
|
|
{
|
|
return cppc_get_reg_val(cpunum, HIGHEST_PERF, highest_perf);
|
|
}
|
|
EXPORT_SYMBOL_GPL(cppc_get_highest_perf);
|
|
|
|
/**
|
|
* cppc_get_epp_perf - Get the epp register value.
|
|
* @cpunum: CPU from which to get epp preference value.
|
|
* @epp_perf: Return address.
|
|
*
|
|
* Return: 0 for success, -EIO otherwise.
|
|
*/
|
|
int cppc_get_epp_perf(int cpunum, u64 *epp_perf)
|
|
{
|
|
return cppc_get_reg_val(cpunum, ENERGY_PERF, epp_perf);
|
|
}
|
|
EXPORT_SYMBOL_GPL(cppc_get_epp_perf);
|
|
|
|
/**
|
|
* cppc_get_perf_caps - Get a CPU's performance capabilities.
|
|
* @cpunum: CPU from which to get capabilities info.
|
|
* @perf_caps: ptr to cppc_perf_caps. See cppc_acpi.h
|
|
*
|
|
* Return: 0 for success with perf_caps populated else -ERRNO.
|
|
*/
|
|
int cppc_get_perf_caps(int cpunum, struct cppc_perf_caps *perf_caps)
|
|
{
|
|
struct cpc_desc *cpc_desc = per_cpu(cpc_desc_ptr, cpunum);
|
|
struct cpc_register_resource *highest_reg, *lowest_reg,
|
|
*lowest_non_linear_reg, *nominal_reg, *reference_reg,
|
|
*guaranteed_reg, *low_freq_reg = NULL, *nom_freq_reg = NULL;
|
|
u64 high, low, guaranteed, nom, ref, min_nonlinear,
|
|
low_f = 0, nom_f = 0;
|
|
int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpunum);
|
|
struct cppc_pcc_data *pcc_ss_data = NULL;
|
|
int ret = 0, regs_in_pcc = 0;
|
|
|
|
if (!cpc_desc) {
|
|
pr_debug("No CPC descriptor for CPU:%d\n", cpunum);
|
|
return -ENODEV;
|
|
}
|
|
|
|
highest_reg = &cpc_desc->cpc_regs[HIGHEST_PERF];
|
|
lowest_reg = &cpc_desc->cpc_regs[LOWEST_PERF];
|
|
lowest_non_linear_reg = &cpc_desc->cpc_regs[LOW_NON_LINEAR_PERF];
|
|
nominal_reg = &cpc_desc->cpc_regs[NOMINAL_PERF];
|
|
reference_reg = &cpc_desc->cpc_regs[REFERENCE_PERF];
|
|
low_freq_reg = &cpc_desc->cpc_regs[LOWEST_FREQ];
|
|
nom_freq_reg = &cpc_desc->cpc_regs[NOMINAL_FREQ];
|
|
guaranteed_reg = &cpc_desc->cpc_regs[GUARANTEED_PERF];
|
|
|
|
/* Are any of the regs PCC ?*/
|
|
if (CPC_IN_PCC(highest_reg) || CPC_IN_PCC(lowest_reg) ||
|
|
CPC_IN_PCC(lowest_non_linear_reg) || CPC_IN_PCC(nominal_reg) ||
|
|
(CPC_SUPPORTED(reference_reg) && CPC_IN_PCC(reference_reg)) ||
|
|
CPC_IN_PCC(low_freq_reg) || CPC_IN_PCC(nom_freq_reg) ||
|
|
CPC_IN_PCC(guaranteed_reg)) {
|
|
if (pcc_ss_id < 0) {
|
|
pr_debug("Invalid pcc_ss_id\n");
|
|
return -ENODEV;
|
|
}
|
|
pcc_ss_data = pcc_data[pcc_ss_id];
|
|
regs_in_pcc = 1;
|
|
down_write(&pcc_ss_data->pcc_lock);
|
|
/* Ring doorbell once to update PCC subspace */
|
|
if (send_pcc_cmd(pcc_ss_id, CMD_READ) < 0) {
|
|
ret = -EIO;
|
|
goto out_err;
|
|
}
|
|
}
|
|
|
|
ret = cpc_read(cpunum, highest_reg, &high);
|
|
if (ret)
|
|
goto out_err;
|
|
perf_caps->highest_perf = high;
|
|
|
|
ret = cpc_read(cpunum, lowest_reg, &low);
|
|
if (ret)
|
|
goto out_err;
|
|
perf_caps->lowest_perf = low;
|
|
|
|
ret = cpc_read(cpunum, nominal_reg, &nom);
|
|
if (ret)
|
|
goto out_err;
|
|
perf_caps->nominal_perf = nom;
|
|
|
|
/*
|
|
* If reference perf register is not supported then we should
|
|
* use the nominal perf value
|
|
*/
|
|
if (CPC_SUPPORTED(reference_reg)) {
|
|
ret = cpc_read(cpunum, reference_reg, &ref);
|
|
if (ret)
|
|
goto out_err;
|
|
} else {
|
|
ref = nom;
|
|
}
|
|
perf_caps->reference_perf = ref;
|
|
|
|
if (guaranteed_reg->type != ACPI_TYPE_BUFFER ||
|
|
IS_NULL_REG(&guaranteed_reg->cpc_entry.reg)) {
|
|
perf_caps->guaranteed_perf = 0;
|
|
} else {
|
|
ret = cpc_read(cpunum, guaranteed_reg, &guaranteed);
|
|
if (ret)
|
|
goto out_err;
|
|
perf_caps->guaranteed_perf = guaranteed;
|
|
}
|
|
|
|
ret = cpc_read(cpunum, lowest_non_linear_reg, &min_nonlinear);
|
|
if (ret)
|
|
goto out_err;
|
|
perf_caps->lowest_nonlinear_perf = min_nonlinear;
|
|
|
|
if (!high || !low || !nom || !ref || !min_nonlinear) {
|
|
ret = -EFAULT;
|
|
goto out_err;
|
|
}
|
|
|
|
/* Read optional lowest and nominal frequencies if present */
|
|
if (CPC_SUPPORTED(low_freq_reg)) {
|
|
ret = cpc_read(cpunum, low_freq_reg, &low_f);
|
|
if (ret)
|
|
goto out_err;
|
|
}
|
|
|
|
if (CPC_SUPPORTED(nom_freq_reg)) {
|
|
ret = cpc_read(cpunum, nom_freq_reg, &nom_f);
|
|
if (ret)
|
|
goto out_err;
|
|
}
|
|
|
|
perf_caps->lowest_freq = low_f;
|
|
perf_caps->nominal_freq = nom_f;
|
|
|
|
|
|
out_err:
|
|
if (regs_in_pcc)
|
|
up_write(&pcc_ss_data->pcc_lock);
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(cppc_get_perf_caps);
|
|
|
|
/**
|
|
* cppc_perf_ctrs_in_pcc_cpu - Check if any perf counters of a CPU are in PCC.
|
|
* @cpu: CPU on which to check perf counters.
|
|
*
|
|
* Return: true if any of the counters are in PCC regions, false otherwise
|
|
*/
|
|
bool cppc_perf_ctrs_in_pcc_cpu(unsigned int cpu)
|
|
{
|
|
struct cpc_desc *cpc_desc = per_cpu(cpc_desc_ptr, cpu);
|
|
|
|
return CPC_IN_PCC(&cpc_desc->cpc_regs[DELIVERED_CTR]) ||
|
|
CPC_IN_PCC(&cpc_desc->cpc_regs[REFERENCE_CTR]) ||
|
|
CPC_IN_PCC(&cpc_desc->cpc_regs[CTR_WRAP_TIME]);
|
|
}
|
|
EXPORT_SYMBOL_GPL(cppc_perf_ctrs_in_pcc_cpu);
|
|
|
|
static int cppc_read_fb_ctrs(int cpunum,
|
|
struct cpc_register_resource *delivered_reg,
|
|
struct cpc_register_resource *reference_reg,
|
|
u64 *delivered, u64 *reference)
|
|
{
|
|
int ret;
|
|
|
|
/*
|
|
* For FFH feedback counters, try a paired read first to reduce
|
|
* sampling skew between delivered and reference counters. Fall
|
|
* back to the existing per-register reads if unsupported.
|
|
*/
|
|
if (CPC_IN_FFH(delivered_reg) && CPC_IN_FFH(reference_reg)) {
|
|
ret = cpc_read_ffh_fb_ctrs(cpunum,
|
|
&delivered_reg->cpc_entry.reg, delivered,
|
|
&reference_reg->cpc_entry.reg, reference);
|
|
if (ret != -EOPNOTSUPP)
|
|
return ret;
|
|
}
|
|
|
|
ret = cpc_read(cpunum, delivered_reg, delivered);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return cpc_read(cpunum, reference_reg, reference);
|
|
}
|
|
|
|
/**
|
|
* cppc_perf_ctrs_in_pcc - Check if any perf counters are in a PCC region.
|
|
*
|
|
* CPPC has flexibility about how CPU performance counters are accessed.
|
|
* One of the choices is PCC regions, which can have a high access latency. This
|
|
* routine allows callers of cppc_get_perf_ctrs() to know this ahead of time.
|
|
*
|
|
* Return: true if any of the counters are in PCC regions, false otherwise
|
|
*/
|
|
bool cppc_perf_ctrs_in_pcc(void)
|
|
{
|
|
int cpu;
|
|
|
|
for_each_online_cpu(cpu) {
|
|
if (cppc_perf_ctrs_in_pcc_cpu(cpu))
|
|
return true;
|
|
}
|
|
|
|
return false;
|
|
}
|
|
EXPORT_SYMBOL_GPL(cppc_perf_ctrs_in_pcc);
|
|
|
|
/**
|
|
* cppc_get_perf_ctrs - Read a CPU's performance feedback counters.
|
|
* @cpunum: CPU from which to read counters.
|
|
* @perf_fb_ctrs: ptr to cppc_perf_fb_ctrs. See cppc_acpi.h
|
|
*
|
|
* Return: 0 for success with perf_fb_ctrs populated else -ERRNO.
|
|
*/
|
|
int cppc_get_perf_ctrs(int cpunum, struct cppc_perf_fb_ctrs *perf_fb_ctrs)
|
|
{
|
|
struct cpc_desc *cpc_desc = per_cpu(cpc_desc_ptr, cpunum);
|
|
struct cpc_register_resource *delivered_reg, *reference_reg,
|
|
*ctr_wrap_reg;
|
|
int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpunum);
|
|
struct cppc_pcc_data *pcc_ss_data = NULL;
|
|
u64 delivered, reference, ctr_wrap_time;
|
|
int ret = 0, regs_in_pcc = 0;
|
|
|
|
if (!cpc_desc) {
|
|
pr_debug("No CPC descriptor for CPU:%d\n", cpunum);
|
|
return -ENODEV;
|
|
}
|
|
|
|
delivered_reg = &cpc_desc->cpc_regs[DELIVERED_CTR];
|
|
reference_reg = &cpc_desc->cpc_regs[REFERENCE_CTR];
|
|
ctr_wrap_reg = &cpc_desc->cpc_regs[CTR_WRAP_TIME];
|
|
|
|
/* Are any of the regs PCC ?*/
|
|
if (CPC_IN_PCC(delivered_reg) || CPC_IN_PCC(reference_reg) ||
|
|
CPC_IN_PCC(ctr_wrap_reg)) {
|
|
if (pcc_ss_id < 0) {
|
|
pr_debug("Invalid pcc_ss_id\n");
|
|
return -ENODEV;
|
|
}
|
|
pcc_ss_data = pcc_data[pcc_ss_id];
|
|
down_write(&pcc_ss_data->pcc_lock);
|
|
regs_in_pcc = 1;
|
|
/* Ring doorbell once to update PCC subspace */
|
|
if (send_pcc_cmd(pcc_ss_id, CMD_READ) < 0) {
|
|
ret = -EIO;
|
|
goto out_err;
|
|
}
|
|
}
|
|
|
|
ret = cppc_read_fb_ctrs(cpunum, delivered_reg, reference_reg,
|
|
&delivered, &reference);
|
|
if (ret)
|
|
goto out_err;
|
|
|
|
/*
|
|
* Per spec, if ctr_wrap_time optional register is unsupported, then the
|
|
* performance counters are assumed to never wrap during the lifetime of
|
|
* platform
|
|
*/
|
|
ctr_wrap_time = (u64)(~((u64)0));
|
|
if (CPC_SUPPORTED(ctr_wrap_reg)) {
|
|
ret = cpc_read(cpunum, ctr_wrap_reg, &ctr_wrap_time);
|
|
if (ret)
|
|
goto out_err;
|
|
}
|
|
|
|
if (!delivered || !reference) {
|
|
ret = -EFAULT;
|
|
goto out_err;
|
|
}
|
|
|
|
perf_fb_ctrs->delivered = delivered;
|
|
perf_fb_ctrs->reference = reference;
|
|
perf_fb_ctrs->wraparound_time = ctr_wrap_time;
|
|
out_err:
|
|
if (regs_in_pcc)
|
|
up_write(&pcc_ss_data->pcc_lock);
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(cppc_get_perf_ctrs);
|
|
|
|
/*
|
|
* Set Energy Performance Preference Register value through
|
|
* Performance Controls Interface
|
|
*/
|
|
int cppc_set_epp_perf(int cpu, struct cppc_perf_ctrls *perf_ctrls, bool enable)
|
|
{
|
|
int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpu);
|
|
struct cpc_register_resource *epp_set_reg;
|
|
struct cpc_register_resource *auto_sel_reg;
|
|
struct cpc_desc *cpc_desc = per_cpu(cpc_desc_ptr, cpu);
|
|
struct cppc_pcc_data *pcc_ss_data = NULL;
|
|
bool autosel_ffh_sysmem;
|
|
bool epp_ffh_sysmem;
|
|
int ret;
|
|
|
|
if (!cpc_desc) {
|
|
pr_debug("No CPC descriptor for CPU:%d\n", cpu);
|
|
return -ENODEV;
|
|
}
|
|
|
|
auto_sel_reg = &cpc_desc->cpc_regs[AUTO_SEL_ENABLE];
|
|
epp_set_reg = &cpc_desc->cpc_regs[ENERGY_PERF];
|
|
|
|
epp_ffh_sysmem = CPC_SUPPORTED(epp_set_reg) &&
|
|
(CPC_IN_FFH(epp_set_reg) || CPC_IN_SYSTEM_MEMORY(epp_set_reg));
|
|
autosel_ffh_sysmem = CPC_SUPPORTED(auto_sel_reg) &&
|
|
(CPC_IN_FFH(auto_sel_reg) || CPC_IN_SYSTEM_MEMORY(auto_sel_reg));
|
|
|
|
if (CPC_IN_PCC(epp_set_reg) || CPC_IN_PCC(auto_sel_reg)) {
|
|
if (pcc_ss_id < 0) {
|
|
pr_debug("Invalid pcc_ss_id for CPU:%d\n", cpu);
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (CPC_SUPPORTED(auto_sel_reg)) {
|
|
ret = cpc_write(cpu, auto_sel_reg, enable);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
if (CPC_SUPPORTED(epp_set_reg)) {
|
|
ret = cpc_write(cpu, epp_set_reg, perf_ctrls->energy_perf);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
pcc_ss_data = pcc_data[pcc_ss_id];
|
|
|
|
down_write(&pcc_ss_data->pcc_lock);
|
|
/* after writing CPC, transfer the ownership of PCC to platform */
|
|
ret = send_pcc_cmd(pcc_ss_id, CMD_WRITE);
|
|
up_write(&pcc_ss_data->pcc_lock);
|
|
} else if (osc_cpc_flexible_adr_space_confirmed &&
|
|
(epp_ffh_sysmem || autosel_ffh_sysmem)) {
|
|
if (autosel_ffh_sysmem) {
|
|
ret = cpc_write(cpu, auto_sel_reg, enable);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
if (epp_ffh_sysmem) {
|
|
ret = cpc_write(cpu, epp_set_reg,
|
|
perf_ctrls->energy_perf);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
} else {
|
|
ret = -ENOTSUPP;
|
|
pr_debug("_CPC in PCC/FFH/SystemMemory are not supported\n");
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(cppc_set_epp_perf);
|
|
|
|
/**
|
|
* cppc_set_epp() - Write the EPP register.
|
|
* @cpu: CPU on which to write register.
|
|
* @epp_val: Value to write to the EPP register.
|
|
*/
|
|
int cppc_set_epp(int cpu, u64 epp_val)
|
|
{
|
|
if (epp_val > CPPC_EPP_ENERGY_EFFICIENCY_PREF)
|
|
return -EINVAL;
|
|
|
|
return cppc_set_reg_val(cpu, ENERGY_PERF, epp_val);
|
|
}
|
|
EXPORT_SYMBOL_GPL(cppc_set_epp);
|
|
|
|
/**
|
|
* cppc_get_auto_act_window() - Read autonomous activity window register.
|
|
* @cpu: CPU from which to read register.
|
|
* @auto_act_window: Return address.
|
|
*
|
|
* According to ACPI 6.5, s8.4.6.1.6, the value read from the autonomous
|
|
* activity window register consists of two parts: a 7 bits value indicate
|
|
* significand and a 3 bits value indicate exponent.
|
|
*/
|
|
int cppc_get_auto_act_window(int cpu, u64 *auto_act_window)
|
|
{
|
|
unsigned int exp;
|
|
u64 val, sig;
|
|
int ret;
|
|
|
|
if (auto_act_window == NULL)
|
|
return -EINVAL;
|
|
|
|
ret = cppc_get_reg_val(cpu, AUTO_ACT_WINDOW, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
sig = val & CPPC_AUTO_ACT_WINDOW_MAX_SIG;
|
|
exp = (val >> CPPC_AUTO_ACT_WINDOW_SIG_BIT_SIZE) & CPPC_AUTO_ACT_WINDOW_MAX_EXP;
|
|
*auto_act_window = sig * int_pow(10, exp);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(cppc_get_auto_act_window);
|
|
|
|
/**
|
|
* cppc_set_auto_act_window() - Write autonomous activity window register.
|
|
* @cpu: CPU on which to write register.
|
|
* @auto_act_window: usec value to write to the autonomous activity window register.
|
|
*
|
|
* According to ACPI 6.5, s8.4.6.1.6, the value to write to the autonomous
|
|
* activity window register consists of two parts: a 7 bits value indicate
|
|
* significand and a 3 bits value indicate exponent.
|
|
*/
|
|
int cppc_set_auto_act_window(int cpu, u64 auto_act_window)
|
|
{
|
|
/* The max value to store is 1270000000 */
|
|
u64 max_val = CPPC_AUTO_ACT_WINDOW_MAX_SIG * int_pow(10, CPPC_AUTO_ACT_WINDOW_MAX_EXP);
|
|
int exp = 0;
|
|
u64 val;
|
|
|
|
if (auto_act_window > max_val)
|
|
return -EINVAL;
|
|
|
|
/*
|
|
* The max significand is 127, when auto_act_window is larger than
|
|
* 129, discard the precision of the last digit and increase the
|
|
* exponent by 1.
|
|
*/
|
|
while (auto_act_window > CPPC_AUTO_ACT_WINDOW_SIG_CARRY_THRESH) {
|
|
auto_act_window /= 10;
|
|
exp += 1;
|
|
}
|
|
|
|
/* For 128 and 129, cut it to 127. */
|
|
if (auto_act_window > CPPC_AUTO_ACT_WINDOW_MAX_SIG)
|
|
auto_act_window = CPPC_AUTO_ACT_WINDOW_MAX_SIG;
|
|
|
|
val = (exp << CPPC_AUTO_ACT_WINDOW_SIG_BIT_SIZE) + auto_act_window;
|
|
|
|
return cppc_set_reg_val(cpu, AUTO_ACT_WINDOW, val);
|
|
}
|
|
EXPORT_SYMBOL_GPL(cppc_set_auto_act_window);
|
|
|
|
/**
|
|
* cppc_get_auto_sel() - Read autonomous selection register.
|
|
* @cpu: CPU from which to read register.
|
|
* @enable: Return address.
|
|
*/
|
|
int cppc_get_auto_sel(int cpu, bool *enable)
|
|
{
|
|
u64 auto_sel;
|
|
int ret;
|
|
|
|
if (enable == NULL)
|
|
return -EINVAL;
|
|
|
|
ret = cppc_get_reg_val(cpu, AUTO_SEL_ENABLE, &auto_sel);
|
|
if (ret)
|
|
return ret;
|
|
|
|
*enable = (bool)auto_sel;
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(cppc_get_auto_sel);
|
|
|
|
/**
|
|
* cppc_set_auto_sel - Write autonomous selection register.
|
|
* @cpu : CPU to which to write register.
|
|
* @enable : the desired value of autonomous selection resiter to be updated.
|
|
*/
|
|
int cppc_set_auto_sel(int cpu, bool enable)
|
|
{
|
|
return cppc_set_reg_val(cpu, AUTO_SEL_ENABLE, enable);
|
|
}
|
|
EXPORT_SYMBOL_GPL(cppc_set_auto_sel);
|
|
|
|
/**
|
|
* cppc_set_enable - Set to enable CPPC on the processor by writing the
|
|
* Continuous Performance Control package EnableRegister field.
|
|
* @cpu: CPU for which to enable CPPC register.
|
|
* @enable: 0 - disable, 1 - enable CPPC feature on the processor.
|
|
*
|
|
* Return: 0 for success, -ERRNO or -EIO otherwise.
|
|
*/
|
|
int cppc_set_enable(int cpu, bool enable)
|
|
{
|
|
return cppc_set_reg_val(cpu, ENABLE, enable);
|
|
}
|
|
EXPORT_SYMBOL_GPL(cppc_set_enable);
|
|
|
|
/**
|
|
* cppc_get_perf - Get a CPU's performance controls.
|
|
* @cpu: CPU for which to get performance controls.
|
|
* @perf_ctrls: ptr to cppc_perf_ctrls. See cppc_acpi.h
|
|
*
|
|
* Desired Performance is not read and is returned as 0.
|
|
*
|
|
* Return: 0 for success with perf_ctrls, -ERRNO otherwise.
|
|
*/
|
|
int cppc_get_perf(int cpu, struct cppc_perf_ctrls *perf_ctrls)
|
|
{
|
|
struct cpc_desc *cpc_desc = per_cpu(cpc_desc_ptr, cpu);
|
|
struct cpc_register_resource *min_perf_reg, *max_perf_reg,
|
|
*energy_perf_reg, *auto_sel_reg;
|
|
u64 min = 0, max = 0, energy_perf = 0, auto_sel = 0;
|
|
int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpu);
|
|
struct cppc_pcc_data *pcc_ss_data = NULL;
|
|
int ret = 0, regs_in_pcc = 0;
|
|
|
|
if (!cpc_desc) {
|
|
pr_debug("No CPC descriptor for CPU:%d\n", cpu);
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (!perf_ctrls) {
|
|
pr_debug("Invalid perf_ctrls pointer\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
min_perf_reg = &cpc_desc->cpc_regs[MIN_PERF];
|
|
max_perf_reg = &cpc_desc->cpc_regs[MAX_PERF];
|
|
energy_perf_reg = &cpc_desc->cpc_regs[ENERGY_PERF];
|
|
auto_sel_reg = &cpc_desc->cpc_regs[AUTO_SEL_ENABLE];
|
|
|
|
/* Are any of the regs PCC ?*/
|
|
if (CPC_IN_PCC(min_perf_reg) || CPC_IN_PCC(max_perf_reg) ||
|
|
CPC_IN_PCC(energy_perf_reg) ||
|
|
CPC_IN_PCC(auto_sel_reg)) {
|
|
if (pcc_ss_id < 0) {
|
|
pr_debug("Invalid pcc_ss_id for CPU:%d\n", cpu);
|
|
return -ENODEV;
|
|
}
|
|
pcc_ss_data = pcc_data[pcc_ss_id];
|
|
regs_in_pcc = 1;
|
|
down_write(&pcc_ss_data->pcc_lock);
|
|
/* Ring doorbell once to update PCC subspace */
|
|
if (send_pcc_cmd(pcc_ss_id, CMD_READ) < 0) {
|
|
ret = -EIO;
|
|
goto out_err;
|
|
}
|
|
}
|
|
|
|
/* Read optional elements if present */
|
|
if (CPC_SUPPORTED(max_perf_reg)) {
|
|
ret = cpc_read(cpu, max_perf_reg, &max);
|
|
if (ret)
|
|
goto out_err;
|
|
}
|
|
perf_ctrls->max_perf = max;
|
|
|
|
if (CPC_SUPPORTED(min_perf_reg)) {
|
|
ret = cpc_read(cpu, min_perf_reg, &min);
|
|
if (ret)
|
|
goto out_err;
|
|
}
|
|
perf_ctrls->min_perf = min;
|
|
|
|
perf_ctrls->desired_perf = 0;
|
|
|
|
if (CPC_SUPPORTED(energy_perf_reg)) {
|
|
ret = cpc_read(cpu, energy_perf_reg, &energy_perf);
|
|
if (ret)
|
|
goto out_err;
|
|
}
|
|
perf_ctrls->energy_perf = energy_perf;
|
|
|
|
if (CPC_SUPPORTED(auto_sel_reg)) {
|
|
ret = cpc_read(cpu, auto_sel_reg, &auto_sel);
|
|
if (ret)
|
|
goto out_err;
|
|
}
|
|
perf_ctrls->auto_sel = (bool)auto_sel;
|
|
|
|
out_err:
|
|
if (regs_in_pcc)
|
|
up_write(&pcc_ss_data->pcc_lock);
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(cppc_get_perf);
|
|
|
|
/**
|
|
* cppc_set_perf - Set a CPU's performance controls.
|
|
* @cpu: CPU for which to set performance controls.
|
|
* @perf_ctrls: ptr to cppc_perf_ctrls. See cppc_acpi.h
|
|
*
|
|
* Return: 0 for success, -ERRNO otherwise.
|
|
*/
|
|
int cppc_set_perf(int cpu, struct cppc_perf_ctrls *perf_ctrls)
|
|
{
|
|
struct cpc_desc *cpc_desc = per_cpu(cpc_desc_ptr, cpu);
|
|
struct cpc_register_resource *desired_reg, *min_perf_reg, *max_perf_reg;
|
|
int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpu);
|
|
struct cppc_pcc_data *pcc_ss_data = NULL;
|
|
bool regs_in_pcc;
|
|
int ret = 0;
|
|
|
|
if (!cpc_desc) {
|
|
pr_debug("No CPC descriptor for CPU:%d\n", cpu);
|
|
return -ENODEV;
|
|
}
|
|
|
|
desired_reg = &cpc_desc->cpc_regs[DESIRED_PERF];
|
|
min_perf_reg = &cpc_desc->cpc_regs[MIN_PERF];
|
|
max_perf_reg = &cpc_desc->cpc_regs[MAX_PERF];
|
|
regs_in_pcc = CPC_IN_PCC(desired_reg) || CPC_IN_PCC(min_perf_reg) ||
|
|
CPC_IN_PCC(max_perf_reg);
|
|
|
|
/*
|
|
* This is Phase-I where we want to write to CPC registers
|
|
* -> We want all CPUs to be able to execute this phase in parallel
|
|
*
|
|
* Since read_lock can be acquired by multiple CPUs simultaneously we
|
|
* achieve that goal here
|
|
*/
|
|
if (regs_in_pcc) {
|
|
if (pcc_ss_id < 0) {
|
|
pr_debug("Invalid pcc_ss_id\n");
|
|
return -ENODEV;
|
|
}
|
|
pcc_ss_data = pcc_data[pcc_ss_id];
|
|
down_read(&pcc_ss_data->pcc_lock); /* BEGIN Phase-I */
|
|
if (pcc_ss_data->platform_owns_pcc) {
|
|
ret = check_pcc_chan(pcc_ss_id, false);
|
|
if (ret) {
|
|
up_read(&pcc_ss_data->pcc_lock);
|
|
return ret;
|
|
}
|
|
}
|
|
/*
|
|
* Update the pending_write to make sure a PCC CMD_READ will not
|
|
* arrive and steal the channel during the switch to write lock
|
|
*/
|
|
pcc_ss_data->pending_pcc_write_cmd = true;
|
|
cpc_desc->write_cmd_id = pcc_ss_data->pcc_write_cnt;
|
|
cpc_desc->write_cmd_status = 0;
|
|
}
|
|
|
|
if (CPC_SUPPORTED(desired_reg))
|
|
cpc_write(cpu, desired_reg, perf_ctrls->desired_perf);
|
|
|
|
/*
|
|
* Only write if min_perf and max_perf not zero. Some drivers pass zero
|
|
* value to min and max perf, but they don't mean to set the zero value,
|
|
* they just don't want to write to those registers.
|
|
*/
|
|
if (perf_ctrls->min_perf && CPC_SUPPORTED(min_perf_reg))
|
|
cpc_write(cpu, min_perf_reg, perf_ctrls->min_perf);
|
|
if (perf_ctrls->max_perf && CPC_SUPPORTED(max_perf_reg))
|
|
cpc_write(cpu, max_perf_reg, perf_ctrls->max_perf);
|
|
|
|
if (regs_in_pcc)
|
|
up_read(&pcc_ss_data->pcc_lock); /* END Phase-I */
|
|
/*
|
|
* This is Phase-II where we transfer the ownership of PCC to Platform
|
|
*
|
|
* Short Summary: Basically if we think of a group of cppc_set_perf
|
|
* requests that happened in short overlapping interval. The last CPU to
|
|
* come out of Phase-I will enter Phase-II and ring the doorbell.
|
|
*
|
|
* We have the following requirements for Phase-II:
|
|
* 1. We want to execute Phase-II only when there are no CPUs
|
|
* currently executing in Phase-I
|
|
* 2. Once we start Phase-II we want to avoid all other CPUs from
|
|
* entering Phase-I.
|
|
* 3. We want only one CPU among all those who went through Phase-I
|
|
* to run phase-II
|
|
*
|
|
* If write_trylock fails to get the lock and doesn't transfer the
|
|
* PCC ownership to the platform, then one of the following will be TRUE
|
|
* 1. There is at-least one CPU in Phase-I which will later execute
|
|
* write_trylock, so the CPUs in Phase-I will be responsible for
|
|
* executing the Phase-II.
|
|
* 2. Some other CPU has beaten this CPU to successfully execute the
|
|
* write_trylock and has already acquired the write_lock. We know for a
|
|
* fact it (other CPU acquiring the write_lock) couldn't have happened
|
|
* before this CPU's Phase-I as we held the read_lock.
|
|
* 3. Some other CPU executing pcc CMD_READ has stolen the
|
|
* down_write, in which case, send_pcc_cmd will check for pending
|
|
* CMD_WRITE commands by checking the pending_pcc_write_cmd.
|
|
* So this CPU can be certain that its request will be delivered
|
|
* So in all cases, this CPU knows that its request will be delivered
|
|
* by another CPU and can return
|
|
*
|
|
* After getting the down_write we still need to check for
|
|
* pending_pcc_write_cmd to take care of the following scenario
|
|
* The thread running this code could be scheduled out between
|
|
* Phase-I and Phase-II. Before it is scheduled back on, another CPU
|
|
* could have delivered the request to Platform by triggering the
|
|
* doorbell and transferred the ownership of PCC to platform. So this
|
|
* avoids triggering an unnecessary doorbell and more importantly before
|
|
* triggering the doorbell it makes sure that the PCC channel ownership
|
|
* is still with OSPM.
|
|
* pending_pcc_write_cmd can also be cleared by a different CPU, if
|
|
* there was a pcc CMD_READ waiting on down_write and it steals the lock
|
|
* before the pcc CMD_WRITE is completed. send_pcc_cmd checks for this
|
|
* case during a CMD_READ and if there are pending writes it delivers
|
|
* the write command before servicing the read command
|
|
*/
|
|
if (regs_in_pcc) {
|
|
if (down_write_trylock(&pcc_ss_data->pcc_lock)) {/* BEGIN Phase-II */
|
|
/* Update only if there are pending write commands */
|
|
if (pcc_ss_data->pending_pcc_write_cmd)
|
|
send_pcc_cmd(pcc_ss_id, CMD_WRITE);
|
|
up_write(&pcc_ss_data->pcc_lock); /* END Phase-II */
|
|
} else
|
|
/* Wait until pcc_write_cnt is updated by send_pcc_cmd */
|
|
wait_event(pcc_ss_data->pcc_write_wait_q,
|
|
cpc_desc->write_cmd_id != pcc_ss_data->pcc_write_cnt);
|
|
|
|
/* send_pcc_cmd updates the status in case of failure */
|
|
ret = cpc_desc->write_cmd_status;
|
|
}
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(cppc_set_perf);
|
|
|
|
/**
|
|
* cppc_get_perf_limited - Get the Performance Limited register value.
|
|
* @cpu: CPU from which to get Performance Limited register.
|
|
* @perf_limited: Pointer to store the Performance Limited value.
|
|
*
|
|
* The returned value contains sticky status bits indicating platform-imposed
|
|
* performance limitations.
|
|
*
|
|
* Return: 0 for success, -EIO on failure, -EOPNOTSUPP if not supported.
|
|
*/
|
|
int cppc_get_perf_limited(int cpu, u64 *perf_limited)
|
|
{
|
|
return cppc_get_reg_val(cpu, PERF_LIMITED, perf_limited);
|
|
}
|
|
EXPORT_SYMBOL_GPL(cppc_get_perf_limited);
|
|
|
|
/**
|
|
* cppc_set_perf_limited() - Clear bits in the Performance Limited register.
|
|
* @cpu: CPU on which to write register.
|
|
* @bits_to_clear: Bitmask of bits to clear in the perf_limited register.
|
|
*
|
|
* The Performance Limited register contains two sticky bits set by platform:
|
|
* - Bit 0 (Desired_Excursion): Set when delivered performance is constrained
|
|
* below desired performance. Not used when Autonomous Selection is enabled.
|
|
* - Bit 1 (Minimum_Excursion): Set when delivered performance is constrained
|
|
* below minimum performance.
|
|
*
|
|
* These bits are sticky and remain set until OSPM explicitly clears them.
|
|
* This function only allows clearing bits (the platform sets them).
|
|
*
|
|
* Return: 0 for success, -EINVAL for invalid bits, -EIO on register
|
|
* access failure, -EOPNOTSUPP if not supported.
|
|
*/
|
|
int cppc_set_perf_limited(int cpu, u64 bits_to_clear)
|
|
{
|
|
u64 current_val, new_val;
|
|
int ret;
|
|
|
|
/* Only bits 0 and 1 are valid */
|
|
if (bits_to_clear & ~CPPC_PERF_LIMITED_MASK)
|
|
return -EINVAL;
|
|
|
|
if (!bits_to_clear)
|
|
return 0;
|
|
|
|
ret = cppc_get_perf_limited(cpu, ¤t_val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Clear the specified bits */
|
|
new_val = current_val & ~bits_to_clear;
|
|
|
|
return cppc_set_reg_val(cpu, PERF_LIMITED, new_val);
|
|
}
|
|
EXPORT_SYMBOL_GPL(cppc_set_perf_limited);
|
|
|
|
/**
|
|
* cppc_get_transition_latency - returns frequency transition latency in ns
|
|
* @cpu_num: CPU number for per_cpu().
|
|
*
|
|
* ACPI CPPC does not explicitly specify how a platform can specify the
|
|
* transition latency for performance change requests. The closest we have
|
|
* is the timing information from the PCCT tables which provides the info
|
|
* on the number and frequency of PCC commands the platform can handle.
|
|
*
|
|
* If desired_reg is in the SystemMemory or SystemIo ACPI address space,
|
|
* then assume there is no latency.
|
|
*/
|
|
int cppc_get_transition_latency(int cpu_num)
|
|
{
|
|
/*
|
|
* Expected transition latency is based on the PCCT timing values
|
|
* Below are definition from ACPI spec:
|
|
* pcc_nominal- Expected latency to process a command, in microseconds
|
|
* pcc_mpar - The maximum number of periodic requests that the subspace
|
|
* channel can support, reported in commands per minute. 0
|
|
* indicates no limitation.
|
|
* pcc_mrtt - The minimum amount of time that OSPM must wait after the
|
|
* completion of a command before issuing the next command,
|
|
* in microseconds.
|
|
*/
|
|
struct cpc_desc *cpc_desc;
|
|
struct cpc_register_resource *desired_reg;
|
|
int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpu_num);
|
|
struct cppc_pcc_data *pcc_ss_data;
|
|
int latency_ns = 0;
|
|
|
|
cpc_desc = per_cpu(cpc_desc_ptr, cpu_num);
|
|
if (!cpc_desc)
|
|
return -ENODATA;
|
|
|
|
desired_reg = &cpc_desc->cpc_regs[DESIRED_PERF];
|
|
if (CPC_IN_SYSTEM_MEMORY(desired_reg) || CPC_IN_SYSTEM_IO(desired_reg))
|
|
return 0;
|
|
|
|
if (!CPC_IN_PCC(desired_reg) || pcc_ss_id < 0)
|
|
return -ENODATA;
|
|
|
|
pcc_ss_data = pcc_data[pcc_ss_id];
|
|
if (pcc_ss_data->pcc_mpar)
|
|
latency_ns = 60 * (1000 * 1000 * 1000 / pcc_ss_data->pcc_mpar);
|
|
|
|
latency_ns = max_t(int, latency_ns, pcc_ss_data->pcc_nominal * 1000);
|
|
latency_ns = max_t(int, latency_ns, pcc_ss_data->pcc_mrtt * 1000);
|
|
|
|
return latency_ns;
|
|
}
|
|
EXPORT_SYMBOL_GPL(cppc_get_transition_latency);
|
|
|
|
/* Minimum struct length needed for the DMI processor entry we want */
|
|
#define DMI_ENTRY_PROCESSOR_MIN_LENGTH 48
|
|
|
|
/* Offset in the DMI processor structure for the max frequency */
|
|
#define DMI_PROCESSOR_MAX_SPEED 0x14
|
|
|
|
/* Callback function used to retrieve the max frequency from DMI */
|
|
static void cppc_find_dmi_mhz(const struct dmi_header *dm, void *private)
|
|
{
|
|
const u8 *dmi_data = (const u8 *)dm;
|
|
u16 *mhz = (u16 *)private;
|
|
|
|
if (dm->type == DMI_ENTRY_PROCESSOR &&
|
|
dm->length >= DMI_ENTRY_PROCESSOR_MIN_LENGTH) {
|
|
u16 val = (u16)get_unaligned((const u16 *)
|
|
(dmi_data + DMI_PROCESSOR_MAX_SPEED));
|
|
*mhz = umax(val, *mhz);
|
|
}
|
|
}
|
|
|
|
/* Look up the max frequency in DMI */
|
|
u64 cppc_get_dmi_max_khz(void)
|
|
{
|
|
u16 mhz = 0;
|
|
|
|
dmi_walk(cppc_find_dmi_mhz, &mhz);
|
|
|
|
/*
|
|
* Real stupid fallback value, just in case there is no
|
|
* actual value set.
|
|
*/
|
|
mhz = mhz ? mhz : 1;
|
|
|
|
return KHZ_PER_MHZ * mhz;
|
|
}
|
|
EXPORT_SYMBOL_GPL(cppc_get_dmi_max_khz);
|
|
|
|
/*
|
|
* If CPPC lowest_freq and nominal_freq registers are exposed then we can
|
|
* use them to convert perf to freq and vice versa. The conversion is
|
|
* extrapolated as an affine function passing by the 2 points:
|
|
* - (Low perf, Low freq)
|
|
* - (Nominal perf, Nominal freq)
|
|
*/
|
|
unsigned int cppc_perf_to_khz(struct cppc_perf_caps *caps, unsigned int perf)
|
|
{
|
|
s64 retval, offset = 0;
|
|
static u64 max_khz;
|
|
u64 mul, div;
|
|
|
|
if (caps->lowest_freq && caps->nominal_freq) {
|
|
/* Avoid special case when nominal_freq is equal to lowest_freq */
|
|
if (caps->lowest_freq == caps->nominal_freq) {
|
|
mul = caps->nominal_freq;
|
|
div = caps->nominal_perf;
|
|
} else {
|
|
mul = caps->nominal_freq - caps->lowest_freq;
|
|
div = caps->nominal_perf - caps->lowest_perf;
|
|
}
|
|
mul *= KHZ_PER_MHZ;
|
|
offset = caps->nominal_freq * KHZ_PER_MHZ -
|
|
div64_u64(caps->nominal_perf * mul, div);
|
|
} else {
|
|
if (!max_khz)
|
|
max_khz = cppc_get_dmi_max_khz();
|
|
mul = max_khz;
|
|
div = caps->highest_perf;
|
|
}
|
|
|
|
retval = offset + div64_u64(perf * mul, div);
|
|
if (retval >= 0)
|
|
return retval;
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(cppc_perf_to_khz);
|
|
|
|
unsigned int cppc_khz_to_perf(struct cppc_perf_caps *caps, unsigned int freq)
|
|
{
|
|
s64 retval, offset = 0;
|
|
static u64 max_khz;
|
|
u64 mul, div;
|
|
|
|
if (caps->lowest_freq && caps->nominal_freq) {
|
|
/* Avoid special case when nominal_freq is equal to lowest_freq */
|
|
if (caps->lowest_freq == caps->nominal_freq) {
|
|
mul = caps->nominal_perf;
|
|
div = caps->nominal_freq;
|
|
} else {
|
|
mul = caps->nominal_perf - caps->lowest_perf;
|
|
div = caps->nominal_freq - caps->lowest_freq;
|
|
}
|
|
/*
|
|
* We don't need to convert to kHz for computing offset and can
|
|
* directly use nominal_freq and lowest_freq as the div64_u64
|
|
* will remove the frequency unit.
|
|
*/
|
|
offset = caps->nominal_perf -
|
|
div64_u64(caps->nominal_freq * mul, div);
|
|
/* But we need it for computing the perf level. */
|
|
div *= KHZ_PER_MHZ;
|
|
} else {
|
|
if (!max_khz)
|
|
max_khz = cppc_get_dmi_max_khz();
|
|
mul = caps->highest_perf;
|
|
div = max_khz;
|
|
}
|
|
|
|
retval = offset + div64_u64(freq * mul, div);
|
|
if (retval >= 0)
|
|
return retval;
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(cppc_khz_to_perf);
|