Stefan Brüns e5c2ce6bac iio: adc: Fix polling of INA219 conversion ready flag ...

While the INA226 has a conversion ready flag (CVRF) in the R/W Mask/Enable
register with read-to-clear semantics, the corresponding bit of the INA219
(CNVR) is part of the bus voltage register. The flag is cleared by reading
the power register.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

2017-07-01 10:16:47 +01:00

..

accel

iio: accel: bmc150: Add support for BOSC0200 ACPI device id

2017-07-01 10:16:37 +01:00

adc

iio: adc: Fix polling of INA219 conversion ready flag

2017-07-01 10:16:47 +01:00

amplifiers

Merge tag 'spi-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

2015-11-05 13:15:12 -08:00

buffer

iio: buffer-dmaengine: Add missing header buffer_impl.h

2017-06-13 20:56:05 +01:00

chemical

drivers: iio: chemical: replace comma with a semicolon

2017-03-30 19:13:23 +01:00

common

iio hid-sensor-trigger: add Kconfig depends on IIO_BUFFER

2017-06-13 21:10:14 +01:00

counter

iio: pc104: Mask PC/104 drivers via the PC104 Kconfig option

2017-03-15 21:59:08 +00:00

dac

Merge tag 'iio-for-4.13a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

2017-05-29 15:53:42 +02:00

dummy

iio:dummy: Stop enabling timestamp by default.

2017-01-10 19:54:55 +00:00

frequency

iio: frequency: ad9523: use unsigned int rather then bare unsigned

2016-04-17 10:31:03 +01:00

gyro

iio: gyro: st_gyro: fix L3GD20H support

2017-07-01 10:16:37 +01:00

health

Merge tag 'iio-for-4.12a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

2017-03-06 13:17:21 +01:00

humidity

iio: humidity: hdc100x: add match table and device id's

2017-07-01 10:16:38 +01:00

imu

Merge tag 'iio-for-4.13b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

2017-06-26 07:09:23 +02:00

light

Merge 4.12-rc5 into staging-next

2017-06-12 08:20:47 +02:00

magnetometer

iio: magnetometer: st_magn_spi: fix spi_device_id table

2017-06-11 15:07:40 +01:00

orientation

iio: hid-sensor-rotation: Add "scale" and "offset" properties parse support

2017-05-07 12:22:36 +01:00

potentiometer

iio: max5481: Add support for Maxim digital potentiometers

2017-01-28 12:13:31 +00:00

potentiostat

iio: lmp91000: Set parent device

2017-02-19 12:01:52 +00:00

pressure

iio: pressure: zpa2326: report interrupted case as failure

2017-05-14 15:28:14 +01:00

proximity

Merge tag 'iio-for-4.13b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

2017-06-26 07:09:23 +02:00

temperature

iio: temperature: tsys01: Add OF match table

2017-07-01 10:16:42 +01:00

trigger

iio: make stm32 trigger driver use INDIO_HARDWARE_TRIGGERED mode

2017-06-11 15:59:05 +01:00

iio_core_trigger.h

iio: fix semicolon in io_core_trigger.h

2013-08-03 18:40:32 +01:00

iio_core.h

iio:core: timestamping clock selection support

2016-06-30 19:41:38 +01:00

industrialio-buffer.c

sched/headers: Prepare to move signal wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h>

2017-03-02 08:42:32 +01:00

industrialio-configfs.c

iio:configfs: Introduce iio/configfs.h to provide a location for the configfs_subsystem

2015-12-05 16:25:30 +00:00

industrialio-core.c

iio: add hardware triggered operating mode

2017-06-11 15:58:41 +01:00

industrialio-event.c

iio: iio_push_event(): Don't crash if the event interface is not registered

2016-09-10 16:40:44 +01:00

industrialio-sw-device.c

iio: Add support for creating IIO devices via configfs

2016-05-04 11:43:54 +01:00

industrialio-sw-trigger.c

iio: core: fix ptr_ret.cocci warnings

2016-01-20 17:09:18 -08:00

industrialio-trigger.c

iio: trigger: fix NULL pointer dereference in iio_trigger_write_current()

2017-05-21 12:36:59 +01:00

industrialio-triggered-event.c

iio: Support triggered events

2015-08-27 20:47:09 +01:00

inkern.c

iio: inkern: fix a static checker error

2017-04-26 06:04:06 +01:00

Kconfig

iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8

2016-10-01 17:06:21 +01:00

Makefile

iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8

2016-10-01 17:06:21 +01:00