Gerhard Engleder 163d744d02 tsnep: Select speed for loopback ...

Use 100 Mbps only if the PHY is configured to this speed. Otherwise use
always the maximum speed of 1000 Mbps.

Also remove explicit setting of carrier on and link mode after loopback.
This is not needed anymore, because phy_loopback() with selected speed
signals the link and the speed to the MAC.

Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250312203010.47429-6-gerhard@engleder-embedded.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

2025-03-20 08:45:08 +01:00

..

Kconfig

tsnep: Use page pool for RX

2022-09-30 11:32:27 +01:00

Makefile

tsnep: Support XDP BPF program setup

2023-01-18 13:17:06 +00:00

tsnep_ethtool.c

tsnep: Remove setting of RX software timestamp

2024-09-03 15:17:48 -07:00

tsnep_hw.h

tsnep: Inline small fragments within TX descriptor

2023-10-16 09:59:34 +01:00

tsnep_main.c

tsnep: Select speed for loopback

2025-03-20 08:45:08 +01:00

tsnep_ptp.c

tsnep: Add free running cycle counter support

2022-05-10 09:48:09 +02:00

tsnep_rxnfc.c

tsnep: Add EtherType RX flow classification support

2022-09-30 11:32:27 +01:00

tsnep_selftests.c

net/sched: taprio: replace tc_taprio_qopt_offload :: enable with a "cmd" enum

2023-05-31 10:00:30 +01:00

tsnep_tc.c

net/sched: taprio: replace tc_taprio_qopt_offload :: enable with a "cmd" enum

2023-05-31 10:00:30 +01:00

tsnep_xdp.c

tsnep: Add XDP socket zero-copy RX support

2023-04-24 18:22:38 -07:00

tsnep.h

tsnep: Fix tsnep_request_irq() format-overflow warning

2023-10-24 13:05:28 -07:00