Timur Tabi a93ad944f4 net: qcom/emac: specify the correct size when mapping a DMA buffer ...

When mapping the RX DMA buffers, the driver was accidentally specifying
zero for the buffer length.  Under normal circumstances, SWIOTLB does not
need to allocate a bounce buffer, so the address is just mapped without
checking the size field.  This is why the error was not detected earlier.

Fixes: b9b17debc6 ("net: emac: emac gigabit ethernet controller driver")
Cc: stable@vger.kernel.org
Signed-off-by: Timur Tabi <timur@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

2017-09-25 16:34:29 -07:00

..

emac

net: qcom/emac: specify the correct size when mapping a DMA buffer

2017-09-25 16:34:29 -07:00

rmnet

net: qualcomm: rmnet: Fix rcu splat in rmnet_is_real_dev_registered

2017-09-23 19:59:53 -07:00

Kconfig

drivers: net: ethernet: qualcomm: rmnet: Initial implementation

2017-08-30 11:41:13 -07:00

Makefile

drivers: net: ethernet: qualcomm: rmnet: Initial implementation

2017-08-30 11:41:13 -07:00

qca_7k_common.c

net: qualcomm: make qca_7k_common a separate kernel module

2017-05-30 13:57:30 -04:00

qca_7k_common.h

net: qualcomm: add QCA7000 UART driver

2017-05-30 13:57:32 -04:00

qca_7k.c

net: qualcomm: move qcaspi_tx_cmd to qca_spi.c

2017-05-30 13:57:29 -04:00

qca_7k.h

net: qualcomm: move qcaspi_tx_cmd to qca_spi.c

2017-05-30 13:57:29 -04:00

qca_debug.c

net: qualcomm: use net_device_ops instead of direct call

2017-05-30 13:57:28 -04:00

qca_debug.h

net: qualcomm: new Ethernet over SPI driver for QCA7000

2014-09-29 00:23:52 -04:00

qca_spi.c

networking: use skb_put_zero()

2017-06-13 13:54:03 -04:00

qca_spi.h

net: qualcomm: rename qca_framing.c to qca_7k_common.c

2017-05-30 13:57:30 -04:00

qca_uart.c

net: qualcomm: add QCA7000 UART driver

2017-05-30 13:57:32 -04:00