Files
linux/drivers/gpu/nova-core/firmware.rs
John Hubbard 4257d31793 gpu: nova-core: Hopper/Blackwell: add FMC firmware image
FSP is the Falcon that runs FMC firmware on Hopper and Blackwell.
Load the FMC ELF in two forms: the image section that FSP boots from,
and the full Firmware object for later signature extraction during
Chain of Trust verification. Declare the FMC image in the module's
firmware table so it is bundled for FSP-based chipsets.

Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Eliot Courtney <ecourtney@nvidia.com>
Link: https://patch.msgid.link/20260602032111.224790-12-jhubbard@nvidia.com
Co-developed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
2026-06-02 22:33:15 +09:00

669 lines
21 KiB
Rust

// SPDX-License-Identifier: GPL-2.0
// SPDX-FileCopyrightText: Copyright (c) 2025-2026 NVIDIA CORPORATION & AFFILIATES. All rights reserved.
//! Contains structures and functions dedicated to the parsing, building and patching of firmwares
//! to be loaded into a given execution unit.
use core::marker::PhantomData;
use core::ops::Deref;
use kernel::{
device,
firmware,
prelude::*,
str::CString,
transmute::FromBytes, //
};
use crate::{
falcon::{
FalconDmaLoadTarget,
FalconFirmware, //
},
gpu,
num::{
FromSafeCast,
IntoSafeCast, //
},
};
pub(crate) mod booter;
pub(crate) mod fsp;
pub(crate) mod fwsec;
pub(crate) mod gsp;
pub(crate) mod riscv;
pub(crate) const FIRMWARE_VERSION: &str = "570.144";
/// Requests the GPU firmware `name` suitable for `chipset`, with version `ver`.
fn request_firmware(
dev: &device::Device,
chipset: gpu::Chipset,
name: &str,
ver: &str,
) -> Result<firmware::Firmware> {
let chip_name = chipset.name();
CString::try_from_fmt(fmt!("nvidia/{chip_name}/gsp/{name}-{ver}.bin"))
.and_then(|path| firmware::Firmware::request(&path, dev))
}
/// Structure used to describe some firmwares, notably FWSEC-FRTS.
#[repr(C)]
#[derive(Debug, Clone)]
pub(crate) struct FalconUCodeDescV2 {
/// Header defined by 'NV_BIT_FALCON_UCODE_DESC_HEADER_VDESC*' in OpenRM.
hdr: u32,
/// Stored size of the ucode after the header, compressed or uncompressed
stored_size: u32,
/// Uncompressed size of the ucode. If store_size == uncompressed_size, then the ucode
/// is not compressed.
pub(crate) uncompressed_size: u32,
/// Code entry point
pub(crate) virtual_entry: u32,
/// Offset after the code segment at which the Application Interface Table headers are located.
pub(crate) interface_offset: u32,
/// Base address at which to load the code segment into 'IMEM'.
pub(crate) imem_phys_base: u32,
/// Size in bytes of the code to copy into 'IMEM' (includes both secure and non-secure
/// segments).
pub(crate) imem_load_size: u32,
/// Virtual 'IMEM' address (i.e. 'tag') at which the code should start.
pub(crate) imem_virt_base: u32,
/// Virtual address of secure IMEM segment.
pub(crate) imem_sec_base: u32,
/// Size of secure IMEM segment.
pub(crate) imem_sec_size: u32,
/// Offset into stored (uncompressed) image at which DMEM begins.
pub(crate) dmem_offset: u32,
/// Base address at which to load the data segment into 'DMEM'.
pub(crate) dmem_phys_base: u32,
/// Size in bytes of the data to copy into 'DMEM'.
pub(crate) dmem_load_size: u32,
/// "Alternate" Size of data to load into IMEM.
pub(crate) alt_imem_load_size: u32,
/// "Alternate" Size of data to load into DMEM.
pub(crate) alt_dmem_load_size: u32,
}
// SAFETY: all bit patterns are valid for this type, and it doesn't use interior mutability.
unsafe impl FromBytes for FalconUCodeDescV2 {}
/// Structure used to describe some firmwares, notably FWSEC-FRTS.
#[repr(C)]
#[derive(Debug, Clone)]
pub(crate) struct FalconUCodeDescV3 {
/// Header defined by `NV_BIT_FALCON_UCODE_DESC_HEADER_VDESC*` in OpenRM.
hdr: u32,
/// Stored size of the ucode after the header.
stored_size: u32,
/// Offset in `DMEM` at which the signature is expected to be found.
pub(crate) pkc_data_offset: u32,
/// Offset after the code segment at which the app headers are located.
pub(crate) interface_offset: u32,
/// Base address at which to load the code segment into `IMEM`.
pub(crate) imem_phys_base: u32,
/// Size in bytes of the code to copy into `IMEM`.
pub(crate) imem_load_size: u32,
/// Virtual `IMEM` address (i.e. `tag`) at which the code should start.
pub(crate) imem_virt_base: u32,
/// Base address at which to load the data segment into `DMEM`.
pub(crate) dmem_phys_base: u32,
/// Size in bytes of the data to copy into `DMEM`.
pub(crate) dmem_load_size: u32,
/// Mask of the falcon engines on which this firmware can run.
pub(crate) engine_id_mask: u16,
/// ID of the ucode used to infer a fuse register to validate the signature.
pub(crate) ucode_id: u8,
/// Number of signatures in this firmware.
pub(crate) signature_count: u8,
/// Versions of the signatures, used to infer a valid signature to use.
pub(crate) signature_versions: u16,
_reserved: u16,
}
// SAFETY: all bit patterns are valid for this type, and it doesn't use
// interior mutability.
unsafe impl FromBytes for FalconUCodeDescV3 {}
/// Enum wrapping the different versions of Falcon microcode descriptors.
///
/// This allows handling both V2 and V3 descriptor formats through a
/// unified type, providing version-agnostic access to firmware metadata
/// via the [`FalconUCodeDescriptor`] trait.
#[derive(Debug, Clone)]
pub(crate) enum FalconUCodeDesc {
V2(FalconUCodeDescV2),
V3(FalconUCodeDescV3),
}
impl Deref for FalconUCodeDesc {
type Target = dyn FalconUCodeDescriptor;
fn deref(&self) -> &Self::Target {
match self {
FalconUCodeDesc::V2(v2) => v2,
FalconUCodeDesc::V3(v3) => v3,
}
}
}
/// Trait providing a common interface for accessing Falcon microcode descriptor fields.
///
/// This trait abstracts over the different descriptor versions ([`FalconUCodeDescV2`] and
/// [`FalconUCodeDescV3`]), allowing code to work with firmware metadata without needing to
/// know the specific descriptor version. Fields not present return zero.
pub(crate) trait FalconUCodeDescriptor {
fn hdr(&self) -> u32;
fn imem_load_size(&self) -> u32;
fn interface_offset(&self) -> u32;
fn dmem_load_size(&self) -> u32;
fn pkc_data_offset(&self) -> u32;
fn engine_id_mask(&self) -> u16;
fn ucode_id(&self) -> u8;
fn signature_count(&self) -> u8;
fn signature_versions(&self) -> u16;
/// Returns the size in bytes of the header.
fn size(&self) -> usize {
let hdr = self.hdr();
const HDR_SIZE_SHIFT: u32 = 16;
const HDR_SIZE_MASK: u32 = 0xffff0000;
((hdr & HDR_SIZE_MASK) >> HDR_SIZE_SHIFT).into_safe_cast()
}
fn imem_sec_load_params(&self) -> FalconDmaLoadTarget;
fn imem_ns_load_params(&self) -> Option<FalconDmaLoadTarget>;
fn dmem_load_params(&self) -> FalconDmaLoadTarget;
}
impl FalconUCodeDescriptor for FalconUCodeDescV2 {
fn hdr(&self) -> u32 {
self.hdr
}
fn imem_load_size(&self) -> u32 {
self.imem_load_size
}
fn interface_offset(&self) -> u32 {
self.interface_offset
}
fn dmem_load_size(&self) -> u32 {
self.dmem_load_size
}
fn pkc_data_offset(&self) -> u32 {
0
}
fn engine_id_mask(&self) -> u16 {
0
}
fn ucode_id(&self) -> u8 {
0
}
fn signature_count(&self) -> u8 {
0
}
fn signature_versions(&self) -> u16 {
0
}
fn imem_sec_load_params(&self) -> FalconDmaLoadTarget {
// `imem_sec_base` is the *virtual* start address of the secure IMEM segment, so subtract
// `imem_virt_base` to get its physical offset.
let imem_sec_start = self.imem_sec_base.saturating_sub(self.imem_virt_base);
FalconDmaLoadTarget {
src_start: imem_sec_start,
dst_start: self.imem_phys_base.saturating_add(imem_sec_start),
len: self.imem_sec_size,
}
}
fn imem_ns_load_params(&self) -> Option<FalconDmaLoadTarget> {
Some(FalconDmaLoadTarget {
// Non-secure code always starts at offset 0.
src_start: 0,
dst_start: self.imem_phys_base,
// `imem_load_size` includes the size of the secure segment, so subtract it to
// get the correct amount of data to copy.
len: self.imem_load_size.saturating_sub(self.imem_sec_size),
})
}
fn dmem_load_params(&self) -> FalconDmaLoadTarget {
FalconDmaLoadTarget {
src_start: self.dmem_offset,
dst_start: self.dmem_phys_base,
len: self.dmem_load_size,
}
}
}
impl FalconUCodeDescriptor for FalconUCodeDescV3 {
fn hdr(&self) -> u32 {
self.hdr
}
fn imem_load_size(&self) -> u32 {
self.imem_load_size
}
fn interface_offset(&self) -> u32 {
self.interface_offset
}
fn dmem_load_size(&self) -> u32 {
self.dmem_load_size
}
fn pkc_data_offset(&self) -> u32 {
self.pkc_data_offset
}
fn engine_id_mask(&self) -> u16 {
self.engine_id_mask
}
fn ucode_id(&self) -> u8 {
self.ucode_id
}
fn signature_count(&self) -> u8 {
self.signature_count
}
fn signature_versions(&self) -> u16 {
self.signature_versions
}
fn imem_sec_load_params(&self) -> FalconDmaLoadTarget {
FalconDmaLoadTarget {
// IMEM segment always starts at offset 0.
src_start: 0,
dst_start: self.imem_phys_base,
len: self.imem_load_size,
}
}
fn imem_ns_load_params(&self) -> Option<FalconDmaLoadTarget> {
// Not used on V3 platforms
None
}
fn dmem_load_params(&self) -> FalconDmaLoadTarget {
FalconDmaLoadTarget {
// DMEM segment starts right after the IMEM one.
src_start: self.imem_load_size,
dst_start: self.dmem_phys_base,
len: self.dmem_load_size,
}
}
}
/// Trait implemented by types defining the signed state of a firmware.
trait SignedState {}
/// Type indicating that the firmware must be signed before it can be used.
struct Unsigned;
impl SignedState for Unsigned {}
/// Type indicating that the firmware is signed and ready to be loaded.
struct Signed;
impl SignedState for Signed {}
/// Microcode to be loaded into a specific falcon.
///
/// This is module-local and meant for sub-modules to use internally.
///
/// After construction, a firmware is [`Unsigned`], and must generally be patched with a signature
/// before it can be loaded (with an exception for development hardware). The
/// [`Self::patch_signature`] and [`Self::no_patch_signature`] methods are used to transition the
/// firmware to its [`Signed`] state.
// TODO: Consider replacing this with a coherent memory object once `CoherentAllocation` supports
// temporary CPU-exclusive access to the object without unsafe methods.
struct FirmwareObject<F: FalconFirmware, S: SignedState>(KVVec<u8>, PhantomData<(F, S)>);
/// Trait for signatures to be patched directly into a given firmware.
///
/// This is module-local and meant for sub-modules to use internally.
trait FirmwareSignature<F: FalconFirmware>: AsRef<[u8]> {}
impl<F: FalconFirmware> FirmwareObject<F, Unsigned> {
/// Patches the firmware at offset `signature_start` with `signature`.
fn patch_signature<S: FirmwareSignature<F>>(
mut self,
signature: &S,
signature_start: usize,
) -> Result<FirmwareObject<F, Signed>> {
let signature_bytes = signature.as_ref();
let signature_end = signature_start
.checked_add(signature_bytes.len())
.ok_or(EOVERFLOW)?;
let dst = self
.0
.get_mut(signature_start..signature_end)
.ok_or(EINVAL)?;
// PANIC: `dst` and `signature_bytes` have the same length.
dst.copy_from_slice(signature_bytes);
Ok(FirmwareObject(self.0, PhantomData))
}
/// Mark the firmware as signed without patching it.
///
/// This method is used to explicitly confirm that we do not need to sign the firmware, while
/// allowing us to continue as if it was. This is typically only needed for development
/// hardware.
fn no_patch_signature(self) -> FirmwareObject<F, Signed> {
FirmwareObject(self.0, PhantomData)
}
}
/// Header common to most firmware files.
#[repr(C)]
#[derive(Debug, Clone)]
struct BinHdr {
/// Magic number, must be `0x10de`.
bin_magic: u32,
/// Version of the header.
bin_ver: u32,
/// Size in bytes of the binary (to be ignored).
bin_size: u32,
/// Offset of the start of the application-specific header.
header_offset: u32,
/// Offset of the start of the data payload.
data_offset: u32,
/// Size in bytes of the data payload.
data_size: u32,
}
// SAFETY: all bit patterns are valid for this type, and it doesn't use interior mutability.
unsafe impl FromBytes for BinHdr {}
// A firmware blob starting with a `BinHdr`.
struct BinFirmware<'a> {
hdr: BinHdr,
fw: &'a [u8],
}
impl<'a> BinFirmware<'a> {
/// Interpret `fw` as a firmware image starting with a [`BinHdr`], and returns the
/// corresponding [`BinFirmware`] that can be used to extract its payload.
fn new(fw: &'a firmware::Firmware) -> Result<Self> {
const BIN_MAGIC: u32 = 0x10de;
let fw = fw.data();
fw.get(0..size_of::<BinHdr>())
// Extract header.
.and_then(BinHdr::from_bytes_copy)
// Validate header.
.filter(|hdr| hdr.bin_magic == BIN_MAGIC)
.map(|hdr| Self { hdr, fw })
.ok_or(EINVAL)
}
/// Returns the data payload of the firmware, or `None` if the data range is out of bounds of
/// the firmware image.
fn data(&self) -> Option<&[u8]> {
let fw_start = usize::from_safe_cast(self.hdr.data_offset);
let fw_size = usize::from_safe_cast(self.hdr.data_size);
let fw_end = fw_start.checked_add(fw_size)?;
self.fw.get(fw_start..fw_end)
}
}
pub(crate) struct ModInfoBuilder<const N: usize>(firmware::ModInfoBuilder<N>);
impl<const N: usize> ModInfoBuilder<N> {
const fn make_entry_file(self, chipset: &str, fw: &str) -> Self {
ModInfoBuilder(
self.0
.new_entry()
.push("nvidia/")
.push(chipset)
.push("/gsp/")
.push(fw)
.push("-")
.push(FIRMWARE_VERSION)
.push(".bin"),
)
}
const fn make_entry_chipset(self, chipset: gpu::Chipset) -> Self {
let name = chipset.name();
let this = self
.make_entry_file(name, "booter_load")
.make_entry_file(name, "booter_unload")
.make_entry_file(name, "bootloader")
.make_entry_file(name, "gsp");
let this = if chipset.needs_fwsec_bootloader() {
this.make_entry_file(name, "gen_bootloader")
} else {
this
};
if chipset.uses_fsp() {
this.make_entry_file(name, "fmc")
} else {
this
}
}
pub(crate) const fn create(
module_name: &'static core::ffi::CStr,
) -> firmware::ModInfoBuilder<N> {
let mut this = Self(firmware::ModInfoBuilder::new(module_name));
let mut i = 0;
while i < gpu::Chipset::ALL.len() {
this = this.make_entry_chipset(gpu::Chipset::ALL[i]);
i += 1;
}
this.0
}
}
/// Ad-hoc and temporary module to extract sections from ELF images.
///
/// Some firmware images are currently packaged as ELF files, where sections names are used as keys
/// to specific and related bits of data. Future firmware versions are scheduled to move away from
/// that scheme before nova-core becomes stable, which means this module will eventually be
/// removed.
mod elf {
use core::mem::size_of;
use kernel::{
bindings,
str::CStr,
transmute::FromBytes, //
};
/// Trait to abstract over ELF header differences.
trait ElfHeader: FromBytes {
fn shnum(&self) -> u16;
fn shoff(&self) -> u64;
fn shstrndx(&self) -> u16;
}
/// Trait to abstract over ELF section-header differences.
trait ElfSectionHeader: FromBytes {
fn name(&self) -> u32;
fn offset(&self) -> u64;
fn size(&self) -> u64;
}
/// Trait describing a matching ELF header and section-header format.
trait ElfFormat {
type Header: ElfHeader;
type SectionHeader: ElfSectionHeader;
}
/// Newtype to provide a [`FromBytes`] implementation.
#[repr(transparent)]
struct Elf64Hdr(bindings::elf64_hdr);
// SAFETY: all bit patterns are valid for this type, and it doesn't use interior mutability.
unsafe impl FromBytes for Elf64Hdr {}
impl ElfHeader for Elf64Hdr {
fn shnum(&self) -> u16 {
self.0.e_shnum
}
fn shoff(&self) -> u64 {
self.0.e_shoff
}
fn shstrndx(&self) -> u16 {
self.0.e_shstrndx
}
}
#[repr(transparent)]
struct Elf64SHdr(bindings::elf64_shdr);
// SAFETY: all bit patterns are valid for this type, and it doesn't use interior mutability.
unsafe impl FromBytes for Elf64SHdr {}
impl ElfSectionHeader for Elf64SHdr {
fn name(&self) -> u32 {
self.0.sh_name
}
fn offset(&self) -> u64 {
self.0.sh_offset
}
fn size(&self) -> u64 {
self.0.sh_size
}
}
struct Elf64Format;
impl ElfFormat for Elf64Format {
type Header = Elf64Hdr;
type SectionHeader = Elf64SHdr;
}
/// Newtype to provide [`FromBytes`] and [`ElfHeader`] implementations for ELF32.
#[repr(transparent)]
struct Elf32Hdr(bindings::elf32_hdr);
// SAFETY: all bit patterns are valid for this type, and it doesn't use interior mutability.
unsafe impl FromBytes for Elf32Hdr {}
impl ElfHeader for Elf32Hdr {
fn shnum(&self) -> u16 {
self.0.e_shnum
}
fn shoff(&self) -> u64 {
u64::from(self.0.e_shoff)
}
fn shstrndx(&self) -> u16 {
self.0.e_shstrndx
}
}
/// Newtype to provide [`FromBytes`] and [`ElfSectionHeader`] implementations for ELF32.
#[repr(transparent)]
struct Elf32SHdr(bindings::elf32_shdr);
// SAFETY: all bit patterns are valid for this type, and it doesn't use interior mutability.
unsafe impl FromBytes for Elf32SHdr {}
impl ElfSectionHeader for Elf32SHdr {
fn name(&self) -> u32 {
self.0.sh_name
}
fn offset(&self) -> u64 {
u64::from(self.0.sh_offset)
}
fn size(&self) -> u64 {
u64::from(self.0.sh_size)
}
}
struct Elf32Format;
impl ElfFormat for Elf32Format {
type Header = Elf32Hdr;
type SectionHeader = Elf32SHdr;
}
/// Returns a NULL-terminated string from the ELF image at `offset`.
fn elf_str(elf: &[u8], offset: u64) -> Option<&str> {
let idx = usize::try_from(offset).ok()?;
let bytes = elf.get(idx..)?;
CStr::from_bytes_until_nul(bytes).ok()?.to_str().ok()
}
fn elf_section_generic<'a, F>(elf: &'a [u8], name: &str) -> Option<&'a [u8]>
where
F: ElfFormat,
{
let hdr = F::Header::from_bytes(elf.get(0..size_of::<F::Header>())?)?;
let shdr_num = usize::from(hdr.shnum());
let shdr_start = usize::try_from(hdr.shoff()).ok()?;
let shdr_end = shdr_num
.checked_mul(size_of::<F::SectionHeader>())
.and_then(|v| v.checked_add(shdr_start))?;
// Get all the section headers as an iterator over byte chunks.
let shdr_bytes = elf.get(shdr_start..shdr_end)?;
let mut shdr_iter = shdr_bytes.chunks_exact(size_of::<F::SectionHeader>());
// Get the strings table.
let strhdr = shdr_iter
.clone()
.nth(usize::from(hdr.shstrndx()))
.and_then(F::SectionHeader::from_bytes)?;
// Find the section which name matches `name` and return it.
shdr_iter.find_map(|sh_bytes| {
let sh = F::SectionHeader::from_bytes(sh_bytes)?;
let name_offset = strhdr.offset().checked_add(u64::from(sh.name()))?;
let section_name = elf_str(elf, name_offset)?;
if section_name != name {
return None;
}
let start = usize::try_from(sh.offset()).ok()?;
let end = usize::try_from(sh.size())
.ok()
.and_then(|sz| start.checked_add(sz))?;
elf.get(start..end)
})
}
/// Extract the section with name `name` from the ELF64 image `elf`.
fn elf64_section<'a>(elf: &'a [u8], name: &str) -> Option<&'a [u8]> {
elf_section_generic::<Elf64Format>(elf, name)
}
/// Extract the section with name `name` from the ELF32 image `elf`.
fn elf32_section<'a>(elf: &'a [u8], name: &str) -> Option<&'a [u8]> {
elf_section_generic::<Elf32Format>(elf, name)
}
/// Automatically detects ELF32 vs ELF64 based on the ELF header.
pub(super) fn elf_section<'a>(elf: &'a [u8], name: &str) -> Option<&'a [u8]> {
// ELF identification: a 4-byte magic followed by a class byte (32- vs 64-bit).
const ELFMAG: &[u8] = b"\x7fELF";
const SELFMAG: usize = ELFMAG.len();
const EI_CLASS: usize = 4;
const ELFCLASS32: u8 = 1;
const ELFCLASS64: u8 = 2;
if elf.get(0..SELFMAG) != Some(ELFMAG) {
return None;
}
match *elf.get(EI_CLASS)? {
ELFCLASS32 => elf32_section(elf, name),
ELFCLASS64 => elf64_section(elf, name),
_ => None,
}
}
}