Files
linux/Documentation
Hans Verkuil 7ec2b3b941 media: cec: add new tx/rx status bits to detect aborts/timeouts
If the HDMI cable is disconnected or the CEC adapter is manually
unconfigured, then all pending transmits and wait-for-replies are
aborted. Signal this with new status bits (CEC_RX/TX_STATUS_ABORTED).

If due to (usually) a driver bug a transmit never ends (i.e. the
transmit_done was never called by the driver), then when this times
out the message is marked with CEC_TX_STATUS_TIMEOUT.

This should not happen and is an indication of a driver bug.

Without a separate status bit for this it was impossible to detect
this from userspace.

The 'transmit timed out' kernel message is now a warning, so this
should be more prominent in the kernel log as well.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: <stable@vger.kernel.org>      # for v4.18 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-05 11:22:39 -04:00
..
2018-04-11 10:28:39 -07:00
2018-08-24 14:46:43 +02:00
2018-07-17 15:33:47 +02:00
2018-03-06 17:26:15 +01:00
2018-03-26 12:13:21 -04:00
2018-03-01 17:32:14 +01:00
2018-05-29 08:59:21 -06:00
2017-05-16 08:44:18 -03:00
2018-07-07 17:27:13 +02:00
2018-03-26 15:57:04 +02:00
2017-12-16 22:37:12 -08:00
2017-08-19 11:02:53 -07:00
2017-07-14 13:51:34 -06:00
2017-07-14 13:51:42 -06:00
2017-07-14 13:51:43 -06:00
2017-07-14 13:51:43 -06:00
2017-07-14 13:51:45 -06:00
2017-07-14 13:51:45 -06:00
2017-07-14 13:51:46 -06:00
2017-07-14 13:57:58 -06:00
2017-07-14 13:57:59 -06:00
2017-07-06 08:23:30 +02:00
2017-07-14 13:58:04 -06:00
2017-07-14 13:58:14 -06:00
2018-05-08 09:16:41 -06:00
2017-07-14 13:58:11 -06:00